LSMW with multiple distribution Channels

Hi,
We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
Does anyone know how to include multiple distribution channels in LSMW material master migration?
Thanks in advance for your support.

you need an extra record in your source per distibution channel.
Alternative you can create the extra record with a small Abap code in LSMW in section __END_OF_RECORD__
There you habe in standard the code:
transfer_record.
just add after this statement a statement that gets the additional wanted distribution channel into the distribution channel field.
BMM00-VTWEG = 'xx'.
transfer_record.

Similar Messages

LSMW datamigration material master with multiple distribution channels

Hi,
We plan on using the LSMW to migrate our customer's material master to a ECC 6.0 system.
Currently we use the BMM00 and BMMH1 structures, but there I can specify only one distribution channel.
Does anyone know how to include multiple distribution channels in LSMW material master migration?
Thanks in advance for your support.
Edited by: Mohammed Qasim Malik on Jan 21, 2008 10:01 AM

you need an extra record in your source per distibution channel.
Alternative you can create the extra record with a small Abap code in LSMW in section __END_OF_RECORD__
There you habe in standard the code:
transfer_record.
just add after this statement a statement that gets the additional wanted distribution channel into the distribution channel field.
BMM00-VTWEG = 'xx'.
transfer_record.

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

Sales order with different Distribution channels

Hi experts,
how can i create a sales order with different distribution channels.
I mean item level 10 = one distribution channel.
Item level 20 = another distribution channel.
also in Item level 30 also.... is it posible .?? how can i create ??
because we have the material in different distribution channel in differen plant with different price ..
Thanksin Advance,
Anthyodaya.

Hi Anthyodaya,
As already answered by others, the distribution channel is only on header level(VBAK), so it is not possble to have different distribution channels in one sales order.
Could you please consider using different division?
Item division could be different than header.
Go->item->Sales B->Division
Hope it helps.
Best regards,
Smile

One shared mailbox with multiple distribution groups connected and the sent items folder - how to configure?

Hi!
I have been struggling for a while now with the following issue.
For starters:
We are using exchange 2010 in combination with outlook 2013 on client computers.
Cause of the limitations concerning the number of mailboxes in outlook im looking for a solution to receive and reply
to multiple aliasses. So i did the following:
1. Configured one shared mailbox.
2. Configured multiple distribution groups
3. made the shared mailbox a member of the distribution groups
4. Configured full access and send as permissions for myself on the shared mailbox ( testing )
5. Gave send as permissions to the shared mailbox in Active directory.
6. Logged in to OWA to setup rules for the shared mailbox.
I now receive emails from all connected distribution groups in the shared mailbox and also in the right folder.
I do however have to select the proper from address when i reply to an email.
the email sent by the main SMTP of the shared mailbox is placed into the sent folder of the shared mailbox.
I setup the senddelagate blabla in register.....
When i sent an email as one of the connected distribution groups it fails to put the sent item in the sent items folder of the shared mailbox. The email is sent using the proper address but placed in the sent folder of my main account.
I want this emails to end up in the sent items folder of the shared mailbox. Or even better, in a sent items folder for each of the addresses.
Any suggestions ?
Thanks in advance!

Hi,
As what
Rajkumar says, sending as a shared mailbox(full access permission) will put the email in the sent item of shared mailbox. But it cannot be located in the “sent item” of a distribution group. Because
it is a distribution group instead of a enabled user mailbox.
According to your further description, I understand that the reason why you configure that is some users reached the
limitation about the number of Exchange accounts you can include in the same Outlook profile. Is it rights? If I misunderstand, please point it out.
By default, user can only add 10 Exchange accounts to the same profile. You can customize the limit to the number Exchange accounts in the same profile using the following registry data:
Key: HKEY_CURRENT_USER\software\policies\Microsoft\exchange
DWORD: MaxNumExchange
Value: integer value starting at 1 (default = 10 if DWORD is missing)
http://blogs.technet.com/b/outlooking/archive/2012/12/24/clarification-on-outlook-2010-and-additional-exchange-account-supportability.aspx
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Multiple distribution channels in one shop application possible?

Dear all,
maybe someone can support me with the following requirement:
I have one shop application (SAP CRM ISA 4.0) that shall be used for selling sales products (distribution channel 10) as well as service products (distribution channel 20) at parallel.
The shop is based on one catalog. In this catalog I have two catalog variants - one for each distribution channel.
Problem:
A service product (distribution channel 20) is never released for the sales channel (distribution channel 10).
When having more than one catalog variant the user has to select a certain catalog/catalog variant when logging onto the shop application. By selecting a certain variant only materials can be purchased that are released for the distribution channel defined in the selected catalog variant (same is valid for TREX search).
=> Does anyone know if it is possible to set up a process to sell products of different distribution channels in one shop application out of one product catalog without releasing a material for both distribution channels?
Thanks a lot for you help.
Best Regards,
Rainer Gryschka

You can do this by specifiying the appropriate data load rule to be used by ERPi within Integration Option 1 in the location. This will kick off the data load rule you specify in ERPi that should be tied to the corresponding set of books in EBS.

LSMW with multiple transaction n multiple files

Hi experts,
is it possible to do data transfer using LSMW(recording) with multiple transaction and multiple files .
Like 3 transaction and 3 files.
I want 1st transaction and 1st file to upload first then
2nd transaction and 2nd file
3rd transaction and 3rd file

Hi,
i think you mean that you want to process first the 1st record of file1 with transaction 1 than 1st record of file 2 with transaction 2
This is possible using recordings(as you asked for).
First Maintain Object Attributes then mark batch input recordings and maintain recordings name.
On the right side are two buttons one for overviewing recordings and one for maintaining more recordings.
Here enter your additional recordings.
Now specify for each recording a own Source Structure and
maintain the Structure Relations and so on...
If you just want to do 1st transaction with all records of file1 than 2nd transaction use three different LSMWs.
You can automize the process by using Data Transfer Workbench(SXDA).
Regards,
Sebastian

Receiving Transaction Processor fails with multiple distribution lines

Hi All,
I am having a problem with 'Receiving Transaction Processor' when receiving is done against a multiple distributions line that has different project, task data. The concurrent program 'Receiving Transaction Processor' completes normally but when you check the quantity_received in po_line_locations_all table it shows partial quantity received.
example:
PO# Test_PO1
Line#1, Shipment#10001, Dist#101, Quantity Ordered: 1, Amount $1000 (Dollar based line), Project_ID: 335803, Task_ID: 12057618
Line#2, Shipment#20001, Dist#101, Quantity Ordered: 3, Amount $750, Unit Price: $250, Project_ID: 335803, Task_ID: 12057618
Line#2, Shipment#20001, Dist#102, Quantity Ordered: 2, Amount $500, Unit Price: $250, Project_ID: 336488, Task_ID: 12121488
Receiving performed using 'Receiving Transaction Processor' by populating data in RCV_Transactions_Interface and RCV_Headers_Interface tables and it gave following error for one of the distribution
from po_interface_errors table.
Line#1, Shipment#10001, Dist#101, Received Amount $400 (Successfully interfaced)
Line#2, Shipment#20001, Dist#101, Quantity Received: 1 (Successfully interfaced)
Line#2, Shipment#20001, Dist#102, Quantity Received: 1 (Failed with below error)
Error_Message: Error: The PROJECT_ID specified is invalid. The value specified (336804) does not match the expected value (335803).
Interface_Type: RCV-856
Error_Message_Name: RCV_INVALID_ROI_VALUE
Table Name: RCV_HEADERS_INTERFACE
Note: This happens only when you have different project_id and task_id values on each distribution for Line#2, Shipment#20001
Please let me know if someone have already came across this issue or if there is already any patch for this issue.
Any help with this issue is appreciated.
Thanks,
Sri

Hi,
Probably, if you put this under SCM - Discrete Manufacturing, your question could solicit more replies..
Rgds,
Rakesh

How do I set up a swept sine vi with multiple response channels?

I'm using a Compact PXI, the PXI-1002. I'm trying to setup a swept sine program that can acquire more than one response channel simultaneously. Is there an easy way to do this? or do I have to modify the SVT swept sine vi's to accommodate acquiring more channels?
- Adam Cissell

Welcome to the discussions, CassC.
You may need to re-post in the pre-Tiger mail forum.
But what I THINK you need to do is use your Address Book, and make a group. Add to the group (by selecting, dragging and dropping) the contacts you need in the distribution list. Now in Mail use the name of the group in the To: or Cc: or Bcc: field to send them all mail.
AK

How do I export from FCP to a QuickTime file with multiple audio channels?

I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
dialogue on tracks 1 and 2
effects on tracks 3 and 4
music on tracks 5 and 6
MY QUESTION
a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
thanks,
Shanked
PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Lsmw with multiple line

Hi,
I need to change/edit payment transaction at vendor master data (FK02).
The vendor already have 1st row with bank ctry, bank key, bank number, now i need to add another row but I am unable to do it.
When we record via lsmw, the recording is okay but in the final output the 2nd line over write the 1st line item.
Please advice how to create 2 or more line items at payment transaction via lsmw.

Create the details in one line ie:
Vendor # Company code Bank Country 1 Bank Country 2 Key1 Key2 bank A/C 1 bank A/C2
If the country is always US create a constant rule while mapping
To verify this, check the Field Mapping in LSMW
Edited by: Vinod Martin on Apr 12, 2010 10:54 PM

LSMW With multiple files

Hi All,
I am trying to see if it is possible to use two files in one LSMW session.
I have a file with two columns:
Legacy code and Amount
I have another fie which is a lookup table and have two columns
Legacy code and SAp wage type
Is there way so that I can use these two files to upload the SAP wage type and deduction amount to PA0014 in one step.
Basically is there a way that first file will do a look up for the SAP WAGE Type from the second file?
I hope this is not confusing
Thanks,
~Mark

Hi,
When you get there double click on the line which says..
Coding: * __GLOBAL_DATA__
Then you will get a editor..
You can write code to declare the internal table..
DATA: BEGIN OF ITAB OCCURS 0,
Your file structure...
END OF ITAB.
In the
__BEGIN_OF_PROCESSING__
Use the function module GUI_UPLOAD to load the file and move it to an internal table ITAB..
Thanks,
Naren

Exporting QT file from FCP with multiple audio channels...?

Is there a way to export a QT file out of FCP that will not mix down all of your audio? This file could be a FCP QT or just a regular QT, doesn't really matter!
But If I wanted to edit with self contained Qts that had been synced from a wav file that had 8 tracks, Each from a different mic. How is this possible?
Thanks in advance.
Jesse Korosi

Hi -
For FCP 7:
Click on your timeline.
Type Command - 0 (Zero) and click on the Audio Outputs Tab.
Change the number of outputs you want, and set the track pairs up as stereo or dual mono, as you want.
Click OK, a warning dialog box will come up that you can dismiss.
On the timeline, Option-Click on each audio track right below the auto-select toggle icon, and from the drop down menu, route the track to the desired output track.
When done, export the Quicktime movie.
The only way you will verify that all the tracks are there is to either open the exported quicktime in Quicktime pro and menu Window > Show Movie Properties. You'll see the additional tracks listed there -OR- just import the exported movie back into FCP and bring it up in the Viewer, you'll see all the audio tracks.
Make sure you restore your sequence back to two channel ouput, if you want, when you are done.
Hope this helps.

Converting Video with multiple subtitle channels

Hi,
I am needing to convert one of our video files. It is currently in an mkv format.
It is easy enough for us to do (as we often have to convert files to various formats), except this one has a subtitle track attached that we wish to export with it so that the final video file has the video along with the subtitle track all in one image.
When others have tried to help, the track will be exported without the subtitle track.

Hello, rohanw82, I am glad to share my experience with you.
At first, make sure what format you need to convert to. And then use MKV Converter Mac program to convert your MKV files, such as Pavtube MKV Converter for Mac.
Its main function is to convert MKV to other common video formats such as AVI, MPEG, WMV, MOV, MP4, etc. Moreover, its another additional function can satisfy you need that split the large MKV video to segments: Trim.
Next are the detailed steps about trimming your MKV video:
1、click the “Edit” button on the top of the program and you will see an “Edit” window. At the bottom of the pop-up window, there are six items for you to select.
2、Click "Trim" and then you can set the start time and the end time to convert.
( Trim Start----Cut off the part before this point. Make this point the start of video.
Trim End----Cut off the part after this point. Make this point the end of video. )
After converting the first segment, use the same method to convert anther segment to convert.
For more information please refer to this step by step guide: http://www.pavtube.com/mkv-converter-mac/guide/how-to-edit-mkv-video-on-mac.html

Exporting a QT with multiple channels?

Curious... Am I able to export / create a QT file with multiple audio channels embedded?
I've a project with multiple tracks of audio. Now, of course, I know how to "pan" a track left / right to create a project with discrete tracks.
But, what if I have multiple tracks (vo, sfx, and STEREO audio.) Is there a way to create QuickTime file (exported from FCPX) with MORE than TWO audio tracks? For example, can I create a file with mono'd VO on one track... mono'd SFX on another... THEN... stereo music on two separate tracks? (for a total of four tracks.)
Please advise, and thanks.

dastoelk wrote:
Luis, many thanx!!!! You mind posting a quick screen shot showing the setting for "Roles as Multitrack Quicktime Movie?" Again... awesome!
No problem!
Here it is. Note that you can create as many audio tracks as you want, and they can each correspond to one or more roles (or sub-roles).
In the example, three audio tracks will be created, one each for Dialogue, Music, Effects; but you can do any combination of roles and/or sub-roles as you please.

LSMW with multiple distribution Channels

Similar Messages

Maybe you are looking for