Lsregister multiple processes

I have an early intel xserve running 10.4.11
It is sharing one directory via SMB to a number of windows users
when each user makes a connection to the system a smb process is created in the process list
it also creates another process, as follows:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Versions/A/Support/lsregister -seed
This secondary process gets left in the process table even if the original smb process is closed
Eventually the system runs out of processes.
what is causing these "zombie" processes to start and how can I stop it from happening
TIA
Tony

It is not a requirement - it is simply a way of modularizing - just like how any piece of code can call other pieces of nested codes.
Srini

Similar Messages

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

Target Vs Acual Cost Comparison for multiple process orders

Dear SAPians,
I want to take a report for target vs actual cost for all process orders and product cost collectors created in a particular period. I have checked the standard report KKBC_ORD that serve my purpose but for a single order. I want the same report for multiple process orders and product cost collectors.
Is there any standard report or should I create a report painter report. I have tried to create a report painter report based on library 7KO, but target cost was not showing for selected order.
Kindly suggest.
Shirazi

Target Costs are available in library 601 for internal orders (and can be used for process/production orders).
Regards,
Adrian

How to delete multiple process at a time in a Process chain

Hi,
Is there any option to delete multiple processes at once in a Process chain in BI 7.0 ?

Hi Swetha,
If u want to stop a perticular proces go to sm37 give user ID (If process chain is schduled then give user ID as ALEREMOTE and if u have triggered it manually then give ur ID) select time and other options like type of process means whether it is active, canceled, ready etc. U will get ur running job.
In sm37 at top of the screen u will get options to cancel or stop active job. But before deleting the active job just
check the job log and also check the business impact.
Also u can not use one process variant in multiple
Regards,
NR

Multiple processes accessing a replicated database

Hi
I am after some help with multiple processes and replicated databases.
I have a primary and secondary database replicated across a pair of servers and this seems to be working well. I'm trying to run another process on one of the machines that opens the environment and databases to view and/or modify the data.
The problem is that when I run this process it causes some sort of corruption such that the server process on the same box gets a DB_EVENT_PANIC the next time it accesses the database. I would like to understand what I am doing wrong.
The servers and standalone process all use the same code to open and close the environment and databases (see below). Just calling
     open_env();
     open_databases();
     close_databases();
     close_env();
in the utility process causes DB_EVENT_PANIC in the server process.
Can anybody spot what I am doing wrong? I am using DB Version 4.7
Thanks
Ashley
open_env() {
db_env_create(&dbenv, 0);
dbenv->app_private = &my_app_data;
dbenv->set_event_notify(dbenv, event_callback);
dbenv->rep_set_limit(dbenv, 0, REPLIMIT);
dbenv->set_flags(dbenv, DB_AUTO_COMMIT | DB_TXN_NOSYNC, 1);
dbenv->set_lk_detect(dbenv, DB_LOCK_DEFAULT)
int flags = DB_CREATE | DB_INIT_LOCK |
          DB_INIT_LOG | DB_INIT_MPOOL |
          DB_INIT_TXN | DB_RECOVER | DB_THREAD;
flags |= DB_INIT_REP;
dbenv->repmgr_set_local_site(dbenv, listen_host, port, 0);
dbenv->rep_set_priority(dbenv, 100);
dbenv->repmgr_set_ack_policy(dbenv, DB_REPMGR_ACKS_ONE);
for (x = 0; x < num_peers; x++) {
dbenv->repmgr_add_remote_site(dbenv, peers[x].name, peers[x].port, &peers[x].eid, 0);
dbenv->rep_set_nsites(dbenv, num_peers + 1);
dbenv->open(dbenv, ".", flags, S_IRUSR | S_IWUSR);
dbenv->repmgr_start(dbenv, 3, DB_REP_ELECTION);
sleep(SLEEPTIME);
close_env() {
dbenv_p->txn_checkpoint(dbenv_p, 0, 0, 0);
dbenv_p->close(dbenv_p, 0);
open_databases() {
db_create(&dbp, dbenv_p, 0)
flags = 0;
if (app_data->is_master)
flags |= DB_CREATE;
dbp->open(dbp, NULL, "primary", NULL, DB_HASH, flags, 0);
... Wait for db if slave and ENOENT ...
primary = dbp;
dbp->open(dbp, NULL, "secondary", NULL, DB_BTREE, flags, 0);
... Wait for db if slave and ENOENT
secondary = dbp;
while (app_data->client_sync) {
sleep(SLEEPTIME);
close_databases() {
     secondary->close(secondary, 0);
     primary->close(primary, 0);
     dbenv_p->txn_checkpoint(dbenv_p, 0, 0, 0);
}

Running recovery (DB_RECOVER flag to env->open()) must be done only in the first process to open the environment.
This is a general rule of Berkeley DB, not specific to replication. You can read more about it in the Reference Guide, on the page entitled "Architecting Transactional Data Store applications".

Create a CR for multiple processing with me as the current processor

Hi
How to create a change request for multiple processing with myself as the current processor.
I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
Display help shows the below
For the upload you need a change request that has the status Considered
and Approved or To Be Revised and ideally has a type that does
not have the property Object List Is Binding. If the
change request does have this property, all the entities that are uploaded must
already be assigned to this object list.
Please can someoen guide me on how to fix this.
I found few threads related to this but cudint understand on how to assign a status to CR
Thanks,
Sharma

Hi Prateek,
Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
For assigning the statuses to the change request:-
Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
how can i set myself as the processor.
tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
Single object is already Unchecked and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
Thanks
Hi Shephalika,
Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
Thanks,
Sharma

Launching Multiple Processes With JWS

Is it possible to launch multiple processes with JWS? I'd like to specify in the jnlp 2 applications to run. Each application must run in its own java.exe process. Why you ask?
I've created a mission critical application in JWS that requires the application to be active at all times. If the application crashes, the second application detects the crash and restarts the jnlp.
How can this be accomplished? I'd like to stay away from created another JVM via JNI if possible.

billmanhillman wrote:
Invoking javaws from the application URL is not scalable. LOL! When people talk about 'scalable' they are usually referring to numbers of the order of '2000', not '2'.
To cover something mentioned in another reply..
Can you get the path to the jar by getResource()?Nope. Sun considers it not to be the business of apps., to know the location of the classes on disk. They have gone to considerable trouble to make it unavailable to applications.

Information Text for multiple process.

Hi All,
I have a page with multiple process.
Process 1. Upload multiple files to table using Process Row
Process 2. The Files are rearranged to another table, ready for analysis.
Process 3. Uploaded file is analysed for errors 1,
Process 4. Analyse for Error 2.
The problem is when the upload file size growth with more number of uploads. It take quite a longer time to upload and then analyse.
Is there a way i can pass back a value to the Page and display what process has been done and what process is running currently.
or Any ideas ?
Thanks in Advance
Bala

Hi,
You can create background process
See if this help you
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/advnc.htm#BABGHIFB
Br, Jari

Implement Process order if there are multiple processes in production of FP

Hi Experts,
I have another scenario in which for a production of final product i need to go through
multiple processes.
For Eg.
I have a raw product suppose as rubber and i want to make an Tyre
for which i have to do 3 procedures followed one by the other in sequence
So can u please explain me how can i achieve the same.
Thanking you
Regards,
Ashish P.
Edited by: Ashish@123 on Nov 14, 2011 2:06 PM

") expected" means exactly what it says. You must be missing brackets there. Correct those and you will prpbably find that the "Illegal start of expressions" will go away too.
Rachel

Sharing in-memory database among multiple processes

From the bdb document, due to disk-less operation, it is not possible to share in-memory among multiple processes.
I am wondering, if it is possible to use DB_ENV but without DB->sync or any other sync() function call, such that the database, cache, etc in the shared region not flushed to the disk, to achieve disk-less operation. Please share your thought.

See "Using the Resource Capping Daemon on a System With Zones Installed" in SystemAdministration Guide: Solaris Containers-Resource
Management and Solaris Zones. You can get the manual from docs.sun.com.
Chapter 10 discuss physical memory control.
Regards

Newbie: why are there multiple process started?

Hi I have a simple question to ask...
Q1. Why are there multiple process for webserver instance and http-admserv for a default installed web server? Please refer below:
$ ps -ef | grep web
root 931 930 0 Jan 21 ? 0:00 webservd -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-admserv/config -n https-adms
root 930 1 0 Jan 21 ? 0:00 ./webservd-wdog -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-admserv/config -n htt
root 948 1 0 Jan 21 ? 0:00 ./webservd-wdog -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-mta01.mydomain.com
root 932 931 0 Jan 21 ? 0:03 webservd -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-admserv/config -n https-adms
root 949 948 0 Jan 21 ? 0:00 webservd -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-mta01.mydomain.com/config
root 950 949 0 Jan 21 ? 42:09 webservd -r /opt/SUNWwbsvr -d /opt/SUNWwbsvr/https-mta01.mydomain.com/config
jes 6203 5994 0 10:52:36 pts/2 0:00 grep web
I understand we need 1 watch dog for web server and 1 for admin server but why 2 process for "https-mta01.mydomain.com" and "https-admserv"?
Q2. This is in relation to Q1. If I need to turn on CA Agent for monitoring, which process should I monitor for web server instance and also for http-admserv?
Newbie.

Ans1) That is by design and default behavior. There is one watch-dog process and 2 webservd processes that get started by default. The first webservd is called primordial and the second child webservd is the one that actually serves all the HTTP requests.
Example:
# ptree 6898
6898 ./webservd-wdog -r /space/iws61sp2 ...
6899 webservd -r /space/iws61sp2 -d ..
6900 webservd -r /space/iws61sp2 -d ...
In this example, the pid 6898 is called the watchdog process,
6899 webservd process is called the primordial process
and the pid 6900 is called the child webservd process that actually serves all the HTTP requests.
Ans2) You would monitor the child webservd process.
Thanks
Manish

Multiple processes in the workflow

Hello Everyone.
Why do we require multiple Processes in a single Workflow? I see that in the seeded workflows, if i open a process, in the flow there will be another process which again might contain several different process attached to the same flow.
In realtime when do we require to use this functionality?
Thanks

It is not a requirement - it is simply a way of modularizing - just like how any piece of code can call other pieces of nested codes.
Srini

Same JVM multiple processes?

Summary: Does any one know how to get a JVM to be shared across different Windows processes, as follows:
Context: I have created a Java ActiveX component. This is instantiated and used as an object embedded in HTML. The HTML will always be executed in Internet Explorer. When I have multiple windows open in the same Internet Explorer process with the same HTML code the static variables are shared by all the Java ActiveX components. If I have multiple process of Internet Explorer open each with the same HTML code the static variables are not shared because different instances of the JVM are running in each Internet Explorer process.
Question: Is it possible to do any of the following:
- Get multiple instances of the JVM to run as multiple Threads i.e. not as separate processed with separate memory segments?
- Get multiple instances of the JVM to share variables?
- Prevent multiple instances of the JVM being created so that all Java objects run in the same JVM regardless of the process that instantiated them.
This is possible in C++ ActiveX components using shared segments across different Internet Explorer processes, as follows:
// in DLL .cpp file
#pragma data_seg (�.mydata�)
int sharedVariable = 1;
#pragma data_seg ( )
#pragma comment(linker, �/SECTION:.mydata, RWS�)Therefore I would expect that if I could achieve a similar approach with Java this would not be prevented by the OS (i.e. Windows) due to memory faults, etc. I know that Java has different (less) memory handling capabilites so this may not be possible but any suggestions would be very much appreciated.
Thanks,
J

Summary: Does any one know how to get a JVM to
be shared across different Windows processes, as
follows:
Context: I have created a Java ActiveX
component. This is instantiated and used as an
object embedded in HTML. The HTML will always be
executed in Internet Explorer. When I have multiple
windows open in the same Internet Explorer process
with the same HTML code the static variables are
shared by all the Java ActiveX components. If I have
multiple process of Internet Explorer open each with
the same HTML code the static variables are not
shared because different instances of the JVM are
running in each Internet Explorer process.
Question: Is it possible to do any of the
following:
- Get multiple instances of the JVM to run as
s multiple Threads i.e. not as separate processed
with separate memory segments? No, each instance of the VM is a seperate process. The closest you can come without hacking the VM and/or IE, is running multiple Java programs in the same VM, each in its own thread.
- Get multiple instances of the JVM to share
e variables?
- Prevent multiple instances of the JVM being
g created so that all Java objects run in the same
JVM regardless of the process that instantiated them.
RMI provides some means of inter-VM communication, but this is probably not suitable for your application. The combination of JNI + NIO also provide some capability for the VM to share memory with native processes, but its not immediately obvious to me how to extend this capability to multiple VM's.
>
This is possible in C++ ActiveX components using
shared segments across different Internet Explorer
processes, as follows:
// in DLL .cpp file
#pragma data_seg (�.mydata�)
int sharedVariable = 1;
#pragma data_seg ( )
#pragma comment(linker, �/SECTION:.mydata,
RWS�)Therefore I would expect that if I could achieve a
similar approach with Java this would not be
prevented by the OS (i.e. Windows) due to memory
faults, etc. I know that Java has different (less)
memory handling capabilites so this may not be
possible but any suggestions would be very much
appreciated.
Thanks,
JAlso, you may want to keep in mind that VM's that run in a browser have a SecurityManager installed that restricts them from performing certain restricted operations. For this reason it may be difficult to do anything really ambitious with an applet or, presumably, a Java ActiveX control, though I have no idea what that is.
Good luck.

Adobe Reader 11.0.10 - High CPU load, multiple processes

Hi,
we have found 2 computers (Windows XP Pro x86, Windows 7 Pro (not sure x64 or x86) were the latest version use all CPU with multiple processes AcroRead32.exe.
PDF are loaded from local drive.
I've tried on my computer (Windows 10 TP x64). No problem.
PDF size is small (150 KB).
Does anyone experience this problem elsewhere ?
Is there something to check ?
Vincent

I've read this :
https://www.adobe.com/devnet-docs/acrobatetk/tools/AppSec/protectedmode.html
interesting but I think I'll remove this feature on these 2 computers to see if there is any change. I'll keep you informed. Thanks.

Multiple processes on unix server even stop replicat, is that block port?

I have configured on source server Oracle goldengate manager/extract on port 7809 and same configured on target server with port 7809.
Now over the weekend, I encountered two problems.
1). tcp ip timeout from extract error log and extract abend.
test : telnet linuxserver 7809
$ telnet linuxserver 7809
Trying...
Connected to linuxserver.
Escape character is '^]'.
Connection closed.
It connected, then after a second, connection closed.
2). On target server, there are multiple processes for replicat existed even I stopped replicat and stopped manager. There are nothing running.
ps -ef|grep ggs
oracle 13595 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14031 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14447 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 14674 1335 0 13:34 pts/0 00:00:00 grep ggs
oracle 14962 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 15529 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 28295 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 28751 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
oracle 29158 1 0 May20 ? 00:00:00 ./replicat INITIALDATALOAD -p 7819-12818 -m 7809 PARAMFILE /u01/app/oracle/product/11.2.0/ggs/dirprm/load2.prm REPORTFILE /u01/app/oracle/product/11.2.0/ggs/dirrpt/LOAD2.rpt PROCESSID LOAD2 USESUBDIRS
I have to manually kill those processes by kill -9 on server.
How to control this manner?
thanks.

I have another quetion, in real life migration, our database have a lot clobs datatype, and logsegments, etc. What is the best practice or advices you can give to me?
I am probably not the best guy to answer this question.
Can I create multiple extracts on source and multiple replicat on source?
Yes.
Let's say we have 10 application users in the prod database, do I create at least extracts for each schema? then within each schema, I create multiple extracts to based on datatype or others?
Yes. You can create one Extract/Replicat group per schema. That would help in parallelizing the things.

Lsregister multiple processes

Similar Messages

Maybe you are looking for