BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

Target Vs Acual Cost Comparison for multiple process orders

Dear SAPians,
I want to take a report for target vs actual cost for all process orders and product cost collectors created in a particular period. I have checked the standard report KKBC_ORD that serve my purpose but for a single order. I want the same report for multiple process orders and product cost collectors.
Is there any standard report or should I create a report painter report. I have tried to create a report painter report based on library 7KO, but target cost was not showing for selected order.
Kindly suggest.
Shirazi

Target Costs are available in library 601 for internal orders (and can be used for process/production orders).
Regards,
Adrian

BOM explosion for Multiple materials

Dear All
In Cs11 where we can get bom explosion report for single material,but i need multiple material more than one material as desired.
Any Std T code is there.

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

BOM explosion for variant material

Hi Gurus!
I created a material variant, when type match is done, the configurable material is changed for the variant properly, in this case, BOM explosion is done in the sales order and components are shown properly (I did this thought customizing).
When I try to sale the variant material directly (without configurable material and type match), the system do not show the BOM explosion.
I need the BOM explosion in the sales order for invoicing proposes.
Can anyone help me?.
Thanks!!.
J. Carlos.

Hi,
To do a requirements explosion for a configured material, you must maintain the data in the
material master record and link a BOM to the configured material.
If the material of the material variant is the same as the configurable material, the link
is already there.
You can either create a BOM especially for the configured material (perhaps using the copy from
function) or allocate the configured material to the BOM for the configurable product. The second
option is the more common solution.
If you allocate the configured material to the BOM for the configurable product, the BOM for the
configurable product is interpreted and exploded according to the characteristic values assigned.
The interpretation includes the processing of selection conditions and the setting of field values in
BOM items according to the relevant actions.
Allocating a Configured Material to a BOM: From the bills of material menu, choose Bills of material Material BOM Alloc. config.
mat. Create.
Chidambaram

Single idoc generation for multiple sales orders

Hi,
Pls let me know how do we generate single idoc for multiple sales orders.
Its not collecting idoc. As we know we can generate an idoc for one sales order correspondingly
my requirement is to generate single idoc number for multiple sales orders.
Do we need to write a program.

Amar,
To understand take HRMD_A04 as example. Root segment has Maximum 9999999999 defined.
Segm.type E1PLOGI
Minimum number 1
Maximum number 9999999999
Parent segment
Hier.level 2
This means that this IDOC types has capability to hold multiple HR Master data objects. PFAL program creates this IDOC and it has facility to mention the Objects per process, check selection screen.
I checked for INVOICE01/02 its not possible there. Hope this clarifies.

Regarding Print of Single Form for multiple Transfer Order ( LT03 )

Hi All,
When user creates Transfer Order and if transfer order items are more than 22 then split of Transfer Order occurrs and multiple TO's get created in system. The standard prog. RLVSDR40 prints form for each TO's , however the requirment is to print only one form for multiple TO ( Actually TO Form containes info. abt delivery, but triggering point should be from TO creation ) .
There is one prog. RLKOMM40 which is used for multiple processing, whether this prog. will be useful for above requirement. Or is there any exit available for above requirement .
Thanks for help.

Hi,
is there any routines used in Copy controls from order - delivery .- re-check once.
as your post, everything seems fine. I didnt see any reason for not creating single delivery.
is it happening only with this customer or respective ship to's? if yes, something gone wrong in CMR - i.e. complete delivery / order combination etcc., ( just an assumption)
Regards,
ReazuddinMD

Single time receiving material from stores for diff process order.

Dear all,
I am creating 5 different process order for 5 different FG material.
But for all 5 fg material one bill of material is common to all.
While receiving material from stores that particular bom i need to get single time only from stores for all five process order.
Kindly please let me know how to process.
Regards
Rajasekaran

Hi Raja,
As replied to your earlier threads, unique reseration is created against each process order. Accordingly issue also takes place againt unique reservation/process order. Use MB1A/MIGO for individual issue or pick list COIK where issue an be done by stores for all process orders in on go.
In SAP Mill Products once DIMP is activated there is combination order functionallity available where if operations/ BOM of 5 orders are same then combination order (New order) can be created by combining the qty of 5 individual orders. Here Goods issue is done against the new combined order which is single order for total 5 orders qty. This functionality i used in Discrete Maufacturing.
Have a look.
Combined Production Order Processing (DIMP)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7c/ea814440ce11d385c70000e8200b4c/content.htm
Thanks & Regards,
Ramagiri

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Auto-create delivery for multiple sales orders

I would like to ask how to create auto-create 'single' delivery
for multiple sales order during release sales order in R11i.
It is found in my example during release sales order, multiple
sales orders fulfill release sales order criteria, a single pick
slip is generated but it is found that each sales order have
individual delivery with it. It will casue multiple pack slips
for a singles pick slip. Is it normal feature for auto-create
delivery, or any setup to solve it?
Thanks in advance.

Am not able to do Single Delivery for Muktiple sales orders
Have you searched the forum for this question as to why you were not able to generate ?? It could be due to multiple reasons. Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
thanks
G. Lakshmipathi

How to create one delivery for multiple sales order

Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
AKASH TAMBI

Hi.,
You can combine different orders in to one delivery ,But for the customer Order combination should be checked in the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana

Process instructions for particular process order.

Hi SAP gurus,
How can I find table level data of process instructions (Like READ 1 , READ2 , INSTR ) maintain for particular process order.
If should not with respect to recipe but it should be respect to process order.
Can any Plz buddy explain me the chain of tables starting from order number?
Best Regards,
Parag Save

Hi...
i could not find the table for the relationship u r looking for... but i would suggest the following...
Go to SE16.. press F4 in the table list...go to the application help... their you will find tables for each module... even for PP you will find table specific to process industry... this you can search ur own what can be relevant for ur requirement... finally u can use SAP query to join some table to the get the information u want....
Try this...hopw it should work for u...
Neeraj

Need transaction similar to KKBC_ORD but for multiple production orders

HI all,
Have been scouring the system looking for a report which displays production order variance information for multiple production orders.
The best way to describe what we need is KKBC_ORD but with the option to select multiple production orders or a range.
This transaction gives us exactly the results we want, but we have a long list of orders to analyse and to be able to get a list of them all rather than have to go into each individually would be fantastic.
Do you think we're looking at a custom development here ?
Regards
Helen Smith

IN these situations, I have sometimes written a "wrapper" program, with a Z version of the transaction....Get the list of documents via user input to your selection options, then loop at that pick list and do a call transaction for each document.

Billing document for multiple sales orders

Hi All,
I am in to ECC 6.0. How can i get single billing document for multiple sales orders?
Can anyone tell me those configuration settings?
Thanks
Patel J

Dear Jaganath,
For Single Invoice, for multiple Sales Order, following details must be same:
1. Sales Document Type for all Sales Order must be same
2. Payer
3. Incoterms
4.Payment Term
5. Account Assignment Grp - Customer
6. Billing Date
7. Exchange Rate
8. Foreign Trade Data
Now, in Copy-Control Settings between Sales Order and Billing (T. Code: VTFA - Order to bill copying control), Select your combination for Sales Order-->Invoice;
and Double Click: Item (from Left-Hand side, Dialog Structure) and Double Click on to your Item Category.
Here, in Filed: VBRK/VBRP, maintain Routine: 003 - Single Invoice.
Important: Also, if Sales Orders have different Divisions,
T. Code: VOV8 - Sales Document Type Maintenance
untick the Box: Item Division.
T. Code: VOR2 - Common Division
Assign those Divisions to Common Divisions.
Best Regards,
Amit

Create a CR for multiple processing with me as the current processor

Hi
How to create a change request for multiple processing with myself as the current processor.
I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
Display help shows the below
For the upload you need a change request that has the status Considered
and Approved or To Be Revised and ideally has a type that does
not have the property Object List Is Binding. If the
change request does have this property, all the entities that are uploaded must
already be assigned to this object list.
Please can someoen guide me on how to fix this.
I found few threads related to this but cudint understand on how to assign a status to CR
Thanks,
Sharma

Hi Prateek,
Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
For assigning the statuses to the change request:-
Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
how can i set myself as the processor.
tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
Single object is already Unchecked and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
Thanks
Hi Shephalika,
Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
Thanks,
Sharma

Inspection type 04 should not generate Insp.lot for specific Process orders

Hi Guyes,
I Want to skip the Inspection lots generation for specific process orders of a particular material during Goods Reciept and stock should be directly posting in to Un-restricted stock.
In the material master assigned with Inspection type 04.
Please advise me the possible options to map this scenario.
regads,
Rao

In QDR1
stage 10-click on insp stage
stage 10
no. of insp : 5
new insp stage : 20
rej : 1
new insp stage : 10
stage 20 - tick on skip
stage 20
no. of skip : say "5"
new insp stage : 10
rej : 1
new insp stage : 10
Now use this DMR in Header of inspection plan of material of process order.
what this will do is after 5 inspections it will skip the next 5 inspection lots.
Make sure :
You can maintain setting for "maximum skip duration in plant level.
In QM view click on Skip & auto UD
Create variant in QA16 & run through QA17
Here in QA17 maintain the duration after which you want to take UD
Also make sure that in selected set maintain stock posting proposal for unrestricted.

BOM Explosion for Multiple Process Orders

Similar Messages

Maybe you are looking for