LX15 Dynamic Selection error
Hi Gurus,
We recently went into problem when we are trying to perform annual stock take.
We executed LX15 to generate the report for annual inventory count. As we have multiple storage types, we input 1 of the storage type and click on dynamic selection to select further storage types. However, upon selecting all the required storage types needed using mulitple selection, whether by single values or ranges, the result of the t-code LX15 only shows the initial storage type that I have input in the initial selection screen.
Is there any other t-code that could be used beside LX15 ? LX16 can't work as we are not basing our stock take in a continuous inventory model.
Hi,
While I was searching for SAP note on this, I did find some OSS notes where dynamic selections were not working and SAP had given some code corrections for S_ALR reports but not this one..
Any idea whether we can get dynamic selection work for this report?
Regards,
SAPFICO
Similar Messages
-
Error on a Dynamic Select using Pro*C
I am a new user on Pro*C and I am facing an error for which I could not find a solution in the Pro*C/C++ Programmer’s Guide. The problem occurs when I do a dynamic SELECT to retrieve sequence of numbers (from 0 to 10) from a very simple table in a database.
The program is retrieving the following sequence: {705, 961, 1217, 1473, 1729, 1985, 2241, 2497, 2753, 3009} rather than the sequence {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}.
It’s very interesting to notice that the retrieved sequence, in hexadecimal, is equal to {2C1, 3C1, 4C1, 5C1, 6C1, 7C1, 8C1, 9C1, AC1, BC1}.
I am quite sure that I'm missing a small detailed here and I would appreciate
any help. Please find below the code that I am using.
Thanks a lot!
#include <string>
#include <iostream>
using namespace std;
#include <sqlca.h>
#include <sqlcpr.h>
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR username[30];
VARCHAR password[30];
VARCHAR db_name [30];
VARCHAR dns_name[30];
EXEC SQL END DECLARE SECTION;
void SQL_Error ( void )
char msg[200];
size_t buf_len = sizeof ( msg );
size_t msg_len;
sqlglm( msg, &buf_len, &msg_len );
if ( msg_len > buf_len )
msg_len = buf_len;
cout << msg << endl;
bool OpenDBConnection( char uname, char pword, char dns, char dbname )
// Assign the database identifications to the ORACLE variables
username.len = (unsigned short) strlen ( strcpy( (char *) username.arr, uname ) );
password.len = (unsigned short) strlen ( strcpy( (char *) password.arr, pword ) );
dns_name.len = (unsigned short) strlen ( strcpy( (char *) dns_name.arr, dns ) );
db_name.len = (unsigned short) strlen ( strcpy( (char *) db_name.arr , dbname ) );
/* Register sql_error() as the error handler */
EXEC SQL WHENEVER SQLERROR goto err;
/* Connect to the non default database */
EXEC SQL CONNECT :username IDENTIFIED BY :password AT :db_name USING :dns_name;
return ( true );
err:
SQL_Error();
return ( false );
** Select the database using a dynamic method
long SelectIDRecord ( void )
EXEC SQL BEGIN DECLARE SECTION;
// Define the dynamic statement
char dyn_statement[4000];
// Define the bind variables
long db_id = 0;
long db_id_type = 2; /* NUMBER */
long db_id_len = 10;
EXEC SQL END DECLARE SECTION;
// Initialize the dynamic statement
memset ( dyn_statement, 0, sizeof( dyn_statement ) );
strcpy ( dyn_statement, "SELECT ID FROM TEST_DB ORDER BY ID" );
EXEC SQL AT :db_name PREPARE s1 FROM :dyn_statement;
// Declare and initialize the output descriptor
EXEC SQL ALLOCATE DESCRIPTOR 'out';
EXEC SQL AT :db_name DESCRIBE OUTPUT s1 USING DESCRIPTOR 'out';
EXEC SQL SET DESCRIPTOR 'out' value 1 TYPE = :db_id_type,
LENGTH = :db_id_len, DATA = :db_id;
// Declare and open the cursor
EXEC SQL AT :db_name DECLARE test_db_cursor CURSOR FOR s1;
EXEC SQL AT :db_name OPEN test_db_cursor;
EXEC SQL WHENEVER NOT FOUND DO BREAK;
long nRec = 0;
while ( true )
EXEC SQL AT :db_name FETCH test_db_cursor INTO DESCRIPTOR 'out';
EXEC SQL GET DESCRIPTOR 'out' VALUE 1 :db_id = DATA;
nRec++;
cout << "ID = " << (long) db_id << endl;
// Close the cursor
EXEC SQL AT :db_name CLOSE test_db_cursor;
EXEC SQL DEALLOCATE DESCRIPTOR 'out';
return ( nRec );
err:
SQL_Error();
return ( 0 );
int main ()
char *uname = "test";
char *pword = "test";
char *dns = "test_db";
char *dbname = "test";
OpenDBConnection ( uname, pword, dns, dbname );
long nRec = SelectIDRecord ();
}No need to specify the length if the data type is number and pointing to Long.
You can directly map the values using INTO clause. -
Dynamic SELECT statement causing CX_SY_DYNAMIC_OSQL_SEMANTICS error.
Hello Gurus,
We have a dynamic SELECT statement in our BW Update Rules where the the Selection Fields are populated at run-time and so are the look-up target and also the WHERE clause. The code basically looks like below:
SELECT (lt_select_flds)
FROM (lf_tab_name)
INTO CORRESPONDING FIELDS OF TABLE <lt_data_tab>
FOR ALL ENTRIES IN <lt_source_data>
WHERE (lf_where).
In this instance, we are selecting 5 fields from Customer Master Data and the WHERE condition for this instance of the run is as below:
WHERE: DIVISION = <lt_source_data>-DIVISION AND DISTR_CHAN = <lt_source_data>-DISTR_CHAN AND SALESORG = <lt_source_data>-SALESORG AND CUST_SALES = <lt_source_data>-SOLD_TO AND OBJVERS = 'A'
This code was working fine till yesterday when we encountered serious performance problems and the Basis team had to do some changes at the DB level [Oracle]. Ever since, when we execute our data load, we get the CX_SY_DYNAMIC_OSQL_SEMANTICS.
Is setting changes at the Oracle level cause issues with how the data is being read at the DB. If yes, can you suggest what can we do to this code to get is working correctly [in case Basis can't revert back their changes]?
Would appreciate any help we can get here.You don't understand - this error comes up when we run specific BEx queries. It was working yesterday, but today it is not. Our support package did not change from yesterday. We did not apply any OSSnotes.
We are however doing pre-prepare on our Prod system.
The temporary table is used to store SIDs for use in the join. the table exists in the dictionary, but not at an Oracle level. -
Runtime Error while using Dynamic Selection
Hi,
We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
Let us know if anyone has come across a similar issue and any help is appreciated.
Regards,
SarvesHi Sarves,
as Rob said.
check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
Regards,
Clemens -
CX_SY_DYNAMIC_OSQL_SEMANTICS error with dynamic SELECT statement
Hello Gurus,
We have a dynamic SELECT statement in our BW Update Rules where the the Selection Fields are populated at run-time and so are the look-up target and also the WHERE clause. The code basically looks like below:
SELECT (lt_select_flds)
FROM (lf_tab_name)
INTO CORRESPONDING FIELDS OF TABLE <lt_data_tab>
FOR ALL ENTRIES IN <lt_source_data>
WHERE (lf_where).
In this instance, we are selecting 5 fields from Customer Master Data and the WHERE condition for this instance of the run is as below:
WHERE: DIVISION = <lt_source_data>-DIVISION AND DISTR_CHAN = <lt_source_data>-DISTR_CHAN AND SALESORG = <lt_source_data>-SALESORG AND CUST_SALES = <lt_source_data>-SOLD_TO AND OBJVERS = 'A'
This code was working fine till we were in BW 3.5 and is causing issues after we moved to BW 7.31 recently. Ever since, when we execute our data load, we get the CX_SY_DYNAMIC_OSQL_SEMANTICS. THE ERROR TEXT SAYS 'Unable to interpret '<LT_SOURCE_data>-DOC_NUMBER'.
Can you pleasesuggest what can we do to this code to get is working correctly ? What has changed in ABAP Objects that has been introduced from BI 7.0 that could be causing this issue?
Would appreciate any help we can get here.
Thanks
ArvindHi,
Please try this.
data: lv_where type string.
concatenate 'vbeln' 'in' 'r_vbeln' into lv_where separated by space.
select *from table into itab where (lv_where).
Also please check this sample code.
REPORT ZDYNAMIC_WHERE .
TABLES: VBAK.
DATA: CONDITION TYPE STRING.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
CONCATENATE 'VBELN' 'IN' 'S_VBELN.'
INTO CONDITION SEPARATED BY SPACE.
SELECT VBELN POSNR FROM VBAP INTO TABLE ITAB
WHERE (CONDITION).
LOOP AT ITAB.
WRITE 'hello'.
ENDLOOP.
Regards,
Ferry Lianto -
Dynamic Select query is failing with error "Invalid Table Name"
OPEN rc FOR 'SELECT count(*) from :s' USING tab_name;
fetch rc into rec_count;
CLOSE rc;
my requirement is to build dynamic select query to retrieve the total count of rows in each table ( variable tab_name contains the table_name )
But I am getting stuck by this errror, not sure if there is any alternative !
ORA-00903: invalid table name
ORA-06512: at line 43OPEN rc FOR 'SELECT count(*) from '||tab_name;
fetch rc into rec_count;
CLOSE rc;
-- This will work
1. Create a sql statement.
2. Open ref cursor for that statement. -
How to get resultset from procedure having dynamic select sql query ?
Hi,
I have created a procedure, in which there is dynamic select query. The procedure has one out put parameter which gives error code. When I compile that procedure it compiles successufully. When I run it it executes successfully and gives output error code. But I don't know how to get resultset of that dynamic select sql query. I need that.
This is the procedure:
create or replace
PROCEDURE uspGetProductDetailsMultiOrder
v_DefinitionDBName IN VARCHAR2,
v_CommonDBName IN VARCHAR2,
v_Filter_FilledStatus IN VARCHAR2,
v_Filter_Internal_Counterparty IN nvarchar2,
v_Filter_NoteType IN nvarchar2,
v_Filter_Exchange IN nvarchar2,
v_Filter_Issuer IN nvarchar2,
v_Filter_Product_Category IN VARCHAR2,
v_DateToFilter IN VARCHAR2,
v_Filter_FromDate IN VARCHAR2,
v_Filter_ToDate IN VARCHAR2,
v_Active_YN_Flag IN NVARCHAR2,
v_Entity_ID IN NVARCHAR2,
v_ErrorNumber OUT NUMBER
as
v_SelectSQL nvarchar2(32767);
v_Setting_Name nvarchar2(32767);
v_Default_Value nvarchar2(32767);
v_Config_Value nvarchar2(32767);
v_CCY_ID NUMBER(10,0);
v_CCY_Data nvarchar2(32767);
v_CCY_List nvarchar2(32767);
v_Seq_Id NUMBER(10,0);
SWV_Active_YN_Flag NVARCHAR2(1);
SWV_VarStr long;--varchar2(4000);
SWV_TRANCOUNT NUMBER(10,0);
SWV_fnc_SplitString_Id_var1 NUMBER(10,0);
SWV_fnc_SplitString_Id_var0 NUMBER(10,0);
CURSOR RestrictTermsheetVisibilityByC
IS select CS.Setting_Name,Default_Value,Config_Value
from Config_Settings CS LEFT OUTER JOIN Entity_Config EC ON EC.Setting_ID = CS.Setting_ID
where EC.Entity_ID = v_Entity_ID AND Setting_Level = 'ENTITY';
CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,','));
--CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id,Data FROM imp;
CURSOR GetRestrictTemplateListCursor
-- is select id,data from imp;
IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,',')) ;
--Parikshit 18-Jul-2010, active YN flag param added in SP
BEGIN
SWV_Active_YN_Flag := v_Active_YN_Flag;
if SWV_Active_YN_Flag = ' ' then
SWV_Active_YN_Flag := 'Y';
end if;
v_SelectSQL := ' ';
v_SelectSQL := v_SelectSQL || ' Select ';
v_SelectSQL := v_SelectSQL || ' NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency';
--SET @SelectSQL = @SelectSQL + ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost '
v_SelectSQL := v_SelectSQL || ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost ';
v_SelectSQL := v_SelectSQL || ' , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag ';
v_SelectSQL := v_SelectSQL || ' , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer';
v_SelectSQL := v_SelectSQL || ' , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount ';
--Added by Parikshit on 14-Jun-2011, to remove the unwinding amounts from the total issue size
--SET @SelectSQL = @SelectSQL + ' , NOP.LastTimeWhenProductModified,NOP.Nominal_Amount as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty '
v_SelectSQL := v_SelectSQL || ' , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ';
--********************************************************END
v_SelectSQL := v_SelectSQL || ' ,T2.Confirmed_Amount, T2.Confirmed_Shares';
v_SelectSQL := v_SelectSQL || ' , T3.Live_Deals';
v_SelectSQL := v_SelectSQL || ' , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL ';
v_SelectSQL := v_SelectSQL || ' , ( case When UPPER(NM.PreHedged_YN) = ''Y'' Then ''Launched'' ';
v_SelectSQL := v_SelectSQL || ' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then ''Matured''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL) Then ''Launched''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then ''Ready To Launch''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then ''Ready To Launch''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then ''Ready To Launch''';
--Warning trigger reached
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then ''Warning Trigger Reached''';
v_SelectSQL := v_SelectSQL || ' Else ''Not Ready'' ';
v_SelectSQL := v_SelectSQL || ' End)Launch_Status';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Code';
v_SelectSQL := v_SelectSQL || ' , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = ''Y'' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge';
v_SelectSQL := v_SelectSQL || ' , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class ';
v_SelectSQL := v_SelectSQL || ' , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '''' then N''Market'' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,''Atmaturity'') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,''N'') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC ';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, ''Product'' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate ';
v_SelectSQL := v_SelectSQL || ' from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName|| '.Note_Master NM ';
v_SelectSQL := v_SelectSQL || 'Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Master NI ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Order_Product NOP ';
v_SelectSQL := v_SelectSQL || ' On NOP.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_DefinitionDBName||'.AssetDef AD ';
v_SelectSQL := v_SelectSQL || ' On AD.Code = NM.Asset';
v_SelectSQL := v_SelectSQL || ' AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Parameter IP ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Template_Master TM ';
v_SelectSQL := v_SelectSQL || ' On TM.Template_Id = NM.Template_ID ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Scheme_Codes SC ';
v_SelectSQL := v_SelectSQL || ' On SC.Scheme_Alias = NM.Type';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Counterparty_Master CM ';
v_SelectSQL := v_SelectSQL || ' On CM.CM_ID = NM.Counterparty';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || ' ( ';
v_SelectSQL := v_SelectSQL || ' Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Deals ';
v_SelectSQL := v_SelectSQL || ' where Prematurity_Date IS NOT NULL';
v_SelectSQL := v_SelectSQL || ' AND (UPPER(Deletion_Reason ) = ''PART REDEMPTION'' or UPPER(Deletion_Reason ) = ''FULL REDEMPTION'')';
v_SelectSQL := v_SelectSQL || ' Group by Note_master_ID ';
v_SelectSQL := v_SelectSQL || ' ) ND ';
v_SelectSQL := v_SelectSQL || ' On ND.Note_Master_ID = NM.Note_Master_ID';
if (v_Filter_FilledStatus = ' ' OR UPPER(v_Filter_FilledStatus) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Filled_Status IN (' || v_Filter_FilledStatus || ')';
end if;
--AND NOP.Internal_Counterparty = 'DEFAULT''
if(SUBSTR(to_char(v_Filter_Internal_Counterparty),1,4000)= ' ') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Internal_Counterparty IN (' || v_Filter_Internal_Counterparty || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --Filter--'
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN ';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Order_RM ';
v_SelectSQL := v_SelectSQL || ' Where substr(UPPER(Order_Status_Flag),1,6) = ''YYYYYY'' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = ''N'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T2';
v_SelectSQL := v_SelectSQL || ' ON T2.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Deals ND ';
v_SelectSQL := v_SelectSQL || ' where ND.Active_YNFlag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T3';
v_SelectSQL := v_SelectSQL || ' ON T3.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' From';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''BUY'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Union';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''SELL'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) BS';
v_SelectSQL := v_SelectSQL || ' ON BS.NH_Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Where NM.Verify_YN_Flag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' AND NM.Active_YN_Flag = ''' || SWV_Active_YN_Flag || '''';
if(SUBSTR(to_char(v_Filter_NoteType),1,4000) = ' ' OR UPPER(v_Filter_NoteType) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Type IN (' || v_Filter_NoteType || ')';
end if;
IF UPPER(v_Entity_ID) <> 'ALL' then
OPEN RestrictTermsheetVisibilityByC;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
WHILE RestrictTermsheetVisibilityByC%FOUND LOOP
--2) Convert comma separated ccy (CNY,HKD,USD) string to single quote ccy with comma separated Ccy ('CNY','HKD','USD') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_CCY') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var0 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var0 > 0) then
--print 'Before Single quote separated ccy : ' + '''' + @Config_Value + ''''
v_Seq_Id := 0;
OPEN Get_RestrictCCY_List_Cursor;
FETCH Get_RestrictCCY_List_Cursor
INTO v_CCY_ID,v_CCY_Data;
WHILE Get_RestrictCCY_List_Cursor%FOUND LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH Get_RestrictCCY_List_Cursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE Get_RestrictCCY_List_Cursor;
--print 'After Single quote ccy : ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND nvl(NM.Denomination_Ccy,NM.Currency) NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
--3) Convert comma separated template (ELN,BELN,BELN_B) string to single quote template code with comma separated template ('ELN','BELN','BELN_B') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_SUBSCHEME') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var1 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var1 > 0) then
v_Seq_Id := 0;
OPEN GetRestrictTemplateListCursor;
FETCH GetRestrictTemplateListCursor
INTO v_CCY_ID,v_CCY_Data;
WHILE GetRestrictTemplateListCursor%FOUND
LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH GetRestrictTemplateListCursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE GetRestrictTemplateListCursor;
--print 'After Single quote template code: ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND TM.Template_Code NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
END LOOP;
CLOSE RestrictTermsheetVisibilityByC;
end if;
if (v_Filter_Exchange = ' ' OR UPPER(v_Filter_Exchange) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Exchange IN (' || v_Filter_Exchange || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --AND NM.Issuer = 4'
if (v_Filter_Issuer = ' ' OR UPPER(v_Filter_Issuer) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Issuer IN (' || v_Filter_Issuer || ')';
end if;
if v_Filter_Product_Category = ' ' then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND UPPER(NM.Note_Issuer_Type) IN (''' || v_Filter_Product_Category || ''')';
end if;
if UPPER(v_DateToFilter) = 'NA' then
v_SelectSQL := v_SelectSQL || ' ';
else
if UPPER(v_DateToFilter) = 'CLOSE_DATE' then
v_SelectSQL := v_SelectSQL || ' AND to_char( '|| v_DateToFilter || ') >= to_date(''' || v_Filter_ToDate || ''');
-- AND convert(smalldatetime,''' || v_Filter_ToDate || ''',106) ';
else
v_SelectSQL := v_SelectSQL || ' AND to_char(''' || v_DateToFilter || ''') BETWEEN to_date(''' || v_Filter_FromDate || ''') AND to_date(''' || v_Filter_ToDate || ''') ';
end if;
end if;
v_SelectSQL := v_SelectSQL || ' Order by NM.Product_Name';
SWV_VarStr := v_SelectSQL;
DBMS_OUTPUT.PUT_LINE(SWV_VarStr);
EXECUTE IMMEDIATE SWV_VarStr;
IF SQLCODE <> 0 then
GOTO ERROR_HANDLER;
end if;
IF SQL%rowcount > 0 then
COMMIT;
SWV_TRANCOUNT := SWV_TRANCOUNT -1;
end if; --Commit Transaction
v_ErrorNumber := SQLCODE;
RETURN;
<< ERROR_HANDLER >> v_ErrorNumber := SQLCODE;
ROLLBACK;
SWV_TRANCOUNT := 0; --Rollback Transaction
RETURN;
END;Please suggest something. Thanks
Edited by: BluShadow on 30-Nov-2011 11:00
added {noformat}{noformat} tags for formatting of code. Please read {message:id=9360002} to learn to do this yourself in future.Connecting to the database sample_adf_finiq_common.
Select NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = 'Y') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = 'Y') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ,T2.Confirmed_Amount, T2.Confirmed_Shares , T3.Live_Deals , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL , ( case When UPPER(NM.PreHedged_YN) = 'Y' Then 'Launched' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then 'Matured' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL) Then 'Launched' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then 'Warning Trigger Reached' Else 'Not Ready' End)Launch_Status , NI.Issuer_Code , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = 'Y' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '' then N'Market' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,'Atmaturity') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,'N') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, 'Product' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate from Sample_ADF_finiq_Common.Note_Master NM Left Outer Join Sample_ADF_finiq_Common.Issuer_Master NI On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Note_Order_Product NOP On NOP.Note_Master_ID = NM.Note_Master_ID Left Outer Join Sample_ADF_finiq_Common.AssetDef AD On AD.Code = NM.Asset AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) Left Outer Join Sample_ADF_finiq_Common.Issuer_Parameter IP On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Template_Master TM On TM.Template_Id = NM.Template_ID Left Outer Join Sample_ADF_finiq_Common.Scheme_Codes SC On SC.Scheme_Alias = NM.Type Left Outer Join Sample_ADF_finiq_Common.Counterparty_Master CM On CM.CM_ID = NM.Counterparty Left Outer Join ( Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from Sample_ADF_finiq_Common.Note_Deals where Prematurity_Date IS NOT NULL AND (UPPER(Deletion_Reason ) = 'PART REDEMPTION' or UPPER(Deletion_Reason ) = 'FULL REDEMPTION') Group by Note_master_ID ) ND On ND.Note_Master_ID = NM.Note_Master_ID AND NOP.Internal_Counterparty IN (1) LEFT OUTER JOIN ( select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares from Sample_ADF_finiq_Common.Note_Order_RM Where substr(UPPER(Order_Status_Flag),1,6) = 'YYYYYY' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = 'N' group by Note_Master_ID ) T2 ON T2.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals from Sample_ADF_finiq_Common.Note_Deals ND where ND.Active_YNFlag = 'Y' group by Note_Master_ID ) T3 ON T3.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( SELECT NH_Note_Master_ID, (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged, (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding, SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY, SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL, SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY, SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL From ( SELECT NH_Note_Master_ID, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'BUY' GROUP BY NH_Note_Master_ID Union SELECT NH_Note_Master_ID, 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL, 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'SELL' GROUP BY NH_Note_Master_ID ) GROUP BY NH_Note_Master_ID ) BS ON BS.NH_Note_Master_ID = NM.Note_Master_ID Where NM.Verify_YN_Flag = 'Y' AND NM.Active_YN_Flag = 'Y' AND UPPER(NM.Note_Issuer_Type) IN ('Internal') AND to_char('16-oct-11') BETWEEN to_date('15-oct-11') AND to_date('17-oct-11') Order by NM.Product_Name
V_ERRORNUMBER = 0
Process exited.
Disconnecting from the database sample_adf_finiq_common.
here v_errornumber=0 is the output when i run it in oracle sql developer. -
Need to know the column names in my dynamic select clause
Dear All,
Please go through the following code. While executing the following code i am getting an error saying that dbms_sql.describe_columns overflow, col_name_len=35. Use describe_columns2.
Please guide me how to proceed further. Or please help me, how can i get the column names when i issue a dynamic select clause.
DECLARE
CUR INTEGER;
COL_CNT INTEGER ;
A INTEGER;
SEL_CLAUSE VARCHAR2(2000);
DESC_T DBMS_SQL.DESC_TAB;
REC DBMS_SQL.DESC_REC;
b number;
BEGIN
SEL_CLAUSE := 'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'',3,''THREE'') FROM DUAL';
--'SELECT ROWID,PARA_SUB_CODE,DECODE('||''''||'ENG'||''''||','||''''||'ENG'||''''||',PARA_NAME,PARA_BL_NAME),NULL,NULL FROM PCOM_APP_PARAMETER';
--'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'') FROM DUAL';
DBMS_OUTPUT.PUT_LINE( SEL_CLAUSE );
CUR := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(CUR,SEL_CLAUSE,DBMS_SQL.NATIVE);
DBMS_SQL.DESCRIBE_COLUMNS(CUR,COL_CNT,DESC_T);
B := desc_t.first;
FOR J IN 1..COL_CNT
LOOP
DBMS_OUTPUT.PUT_LINE('J := '||J || ' COL CNT ' || COL_CNT);
END LOOP;
BEGIN
A := DBMS_SQL.EXECUTE(CUR);
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
END;
Regards,
BalajiIs there any way can i have it directly??It does not work with static SQL either. Dynamic SQL is no different.
SQL> select 1 x from dual where x = 1 ;
select 1 x from dual where x = 1
ERROR at line 1:
ORA-00904: "X": invalid identifier
SQL>As suggested already, you will need to use alias if you want your select expression to be referred in the where clause.
SQL> BEGIN
2 FOR rec IN (SELECT *
3 FROM (SELECT 1,
4 2,
5 DECODE(1, 1, 'ONE', 2, 'TWO', 3, 'THREE') "DECODE(1, 1, 'ONE', 2, 'TWO', "
6 FROM DUAL)
7 WHERE "DECODE(1, 1, 'ONE', 2, 'TWO', " = 'ONE')
8 LOOP
9 NULL;
10 END LOOP;
11 END;
12 /
PL/SQL procedure successfully completed.
SQL>Message was edited by:
Kamal Kishore -
Exclude one field from Logical Database's dynamic selection screen
Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
FungThe selection part of the logical database defines input fields for selecting data.
The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
Include called DB<ldbname>SEL.
SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
SELECTION-SCREEN EXCLUDE ... .
SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen. -
grrrrr............ok so I'm kinda new to this, and just a little frustrated. I'm gonna ramble here, so any time I sound like I don't know what I'm talking about it 's because I don't..correct me. I want to include a bean in a jsp which will buil d a dynamic select box on the fly. That is, connect to an LDAP db and place each value returned in the query in a select box. Now, I can compile and run the bean in my IDE and watch the output in the console. It's correct because I see "<select><option value = hall>hall....</select>". In the buildSelectBox() method I'm using System.out.println to display each line of my select box (is that right?). Now, when I copy the .class file over to the server I was initially getting an error because the bean wasn't found. I resolved that by properly compiling the bean in a package. Problem is that if I call the bean.buildSelect() method in the .jsp nothing comes back. The page is left blank. What in the world is that about? Can someone push me toward a tutorial that can push me in the right direction or sumthin? Why am I having so much trouble with this? Should I be building the select on the jsp?
regards,
matHi!
If i understand you correctly :-) you are doing not very right things. I don't want it to seem like I'm going to teach you, but:
The Bean that has buildSelect() method is not a bean at all. Usualy Beans contain getter/setters and accumulate data. If you want to build html code dynamicaly then you should use servlets(Which is not very flexible in your situation, I think), not JSPs. And if you are using JSPs then you have to make Tag which will do this everything.
Other way is to use Struts framework which is very good and flexible for building web applications - it has it's own tags for many cases. You can make loops in JSPs, use beans and all that stuff.
Guys will correct me if I missed something.
Good luck -
Dynamic Select in FOR REC IN (SELECT
Hello Guys,
We are trying to use dynamic select statement in FOR REC IN based on certain parameter. But does not compile with following error message.
209/10 PLS-00103: Encountered the symbol "END" when expecting one of the following:
loop
Could some one let us know how this can be achieved, may be with an example. Thankis in advance. Here is the sample code:
IF pPROCESS_BY = 'ALL' THEN
FOR REC IN (SELECT LSP.HAZMNP_SEQ_NO,
LSP.LSP_START_DATE,
LSP.LSP_END_DATE,
LSP.LSP_OST,
LSP.LSP_DBI,
LSP.LSP_DBI_FREQUENCY_PERIIOD,
LSP.LSP_DBI_RETENTION_PERIOD,
LSP.LSP_DBI_RETENTION_FREQUENCY,
LSP.LSP_ENDURANCE_LEVEL,
LSP.LSP_RDE_PERIOD1,
LSP.LSP_RDE_PERIOD2,
LSP.LSP_RDE_PERIOD3,
LSP.LSP_RDE_PERIOD4,
LSP.LSP_EXCLUDED_ACTIVITIES,
LSP.LSP_SEQ_NO
FROM LEVEL_SET_PARAM LSP
WHERE LSP.LSP_PROCESS_ALL_NIINS = 'Y'
AND LSP.LSP_IS_ALL_NIINS_PROCESSED = 'N'
AND LSP.HAZMNP_SEQ_NO = pHAZMINSEQNO
AND ROWNUM = 1
ORDER BY LSP_SEQ_NO DESC)
END IF;
IF pPROCESS_BY = 'SPN' THEN
FOR REC IN (SELECT LSP.HAZMNP_SEQ_NO,
LSP.LSP_START_DATE,
LSP.LSP_END_DATE,
LSP.LSP_OST,
LSP.LSP_DBI,
LSP.LSP_DBI_FREQUENCY_PERIIOD,
LSP.LSP_DBI_RETENTION_PERIOD,
LSP.LSP_DBI_RETENTION_FREQUENCY,
LSP.LSP_ENDURANCE_LEVEL,
LSP.LSP_RDE_PERIOD1,
LSP.LSP_RDE_PERIOD2,
LSP.LSP_RDE_PERIOD3,
LSP.LSP_RDE_PERIOD4,
LSP.LSP_EXCLUDED_ACTIVITIES,
LSP.LSP_SEQ_NO
FROM LEVEL_SET_PARAM LSP
WHERE LSP.HAZMNP_SEQ_NO = pHAZMINSEQNO
AND LSP.LSP_SPECIFIC_NIIN = pSPECIFIC_NIIN
AND ROWNUM = 1
ORDER BY LSP_SEQ_NO DESC)
END IF;
LOOPYou need to use cursor variables if you want to process result sets based on different query statements.
For more information and a sample see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/06_ora.htm#1510 -
A/R Sales Report Dynamic Selections Have No Impact. RFDUML00 S_ALR_87012186
When selecting specific G/L account in A/R sales report from the dynamic selections list, the results are not considering the restriction. Report is program RFDUML00 and tcode is S_ALR_87012186.
Is there some configuration required to make this dynamic selection recognized by the report or??Hi Grevaz,
I would check tomorrow and then see.
Thanks for the reply.
It hard to trace whats the error ans you are the first to reply back after 1 and half day
Cheers
Ajay -
Absolute dynamic select query with dynamic join and where
Has anyone ever tried creating an absolutely dynamic SELECT query with dynamic Join and Where conditions.
I have a requirement of creating such a query in an Utility Class, and i have written the code. But its throwing my sysntax errors.
Please let me know where am I going wrong OR is it really possible to create such a dynamic Query??
SELECT (FIELDS) INTO TABLE IT_TABLES
FROM ( (ME->TABLE1) inner join ( me->table2 )
on ( on_condition ) )
WHERE (me->where_fields).
Ags.It worked for me in a following way:
select * into corresponding fields of table <result_table>
from (join_string)
where (l_where).
Where the contents of join_string were dynamically build using concatenation. So it will be something like
concatenate ME->TABLE1 'as a INNER JOIN' me->table2 'as b ON (' into join_string separated by space.
<...>
add here matching/reference colums, something like
concatenate 'a~' me->TABLE1_JOIN_COL into temp1.
concatenate 'b~' me->TABLE2_JOIN_COL into temp2.
concatenate join_string temp1 '=' temp2 into join_string separated by space.
<...>
concatenate join_string ')' into join_string separated by space.
And then use similar approach for l_where variable. -
Short Dump for Dynamic Select Query
Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
<t> TYPE table.
DATA: it_fldcat TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details TYPE abap_compdescr_tab,
wa_details TYPE abap_compdescr.
DATA: ref_descr TYPE REF TO cl_abap_structdescr.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
SELECT * INTO TABLE <t>
FROM (p_table)
WHERE (tab_cond)
ORDER BY (tab_ord).
ENDFORM. " GET_CCNUM_2Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
* CLEAR wa_it_fldcat.
* wa_it_fldcat-fieldname = wa_details-name .
* wa_it_fldcat-datatype = wa_details-type_kind.
* wa_it_fldcat-intlen = wa_details-length.
* wa_it_fldcat-decimals = wa_details-decimals.
* APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
* EXPORTING
* it_fieldcatalog = it_fldcat
* IMPORTING
* ep_table = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table). " New code by naren
Please Try this..
Thanks
Naren -
Add field in dynamic selections to ME2A, to create aselection view in LDB
Hi all,
I would like to include in the search selection of ME2A the field 'Relevant for agency business', but this field doesn´t appear at the purchasing document . I´ve been reading that by the Logical database builder it is possible to do this, but I don´t manage how.
I've been trying (with transaction SE36) to copy from Source view - SAP to Target view - CUS for some logical database (for example LDB - ELM) and I havn't been success. I received Error "The selection view does not exist"
Which LDB should I choose? How to create a selection view STANDARD SAP ?
Thanks in advance
All RegardsDear Weiyang
kindly note that as per SAP note 310886 Only certain tables or fields are permitted
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
no other table is allowed
so your field BKPF-CPUDT is not allowed in dynamic selection
Hope your query is solved
Cheers
IMK
Maybe you are looking for
-
Is there a way to remove very old Oracle SR we created 4-5 years ago?
We have changed several dbas, and have a whole bunch of old SR in our account. I want to remove most of those old unrelevent SRs. I could not find a button to do that. Can anybody tell me if it is even possible to do that? Thanks
-
What is that, that is specific to the d/b table <b>COEP</b>, that a <b>SELECT</b> query in a report on this table consumes more time when it is run for the first time, however in the subsequent runs it doesn't even consume half of the time of its fir
-
I forgot the password to a pages-document, is there any way to reset the document?
I forgot the password to a pages-document, is there any way to reset the document? Thank You
-
My sound button will only lower volume how do I increase volume?
How do I increase the volume on my iPad? I can only decrease the sound using the button in the side of the ipad
-
Function to change proportions of canvas
hello, I hope someone can help me with this. I have an canvas that is representing a piece of paper. By chosing an option in the radiobuttongroup i wanna change the proportions and position of my canvas. chosing landscape or normal to rotate the canv