Mac cannot find time machine

Have a Time Machine that I have not used for a while. I have had it connected to another mac. Now I want to connect it to my new Mac, but when I Open the application it is not recognzed.
I have connected the ethernet to the TC, and my Mac is connected to the same wifi router.
Any suggestions?

What mode is the TC running?
I recommend you do TC setups in full isolation to the network.. this is not hard.. plug in by ethernet and no other connection to the TC or computer.. ie run an ethernet TC to the computer..
Do a full reset of the TC.. and the computer will now be able to recognise it and you can complete the seteup.. then put the TC back into the network.

Similar Messages

Cannot find time machine

I bought the Time capsule over Christmas. Set it up and it worked fine. a month ago it kept telling me cannot back up time machine. I reset it to factory settings after I tried everything else on line to fix it. I have set it up and now I cannot find time machine. I turn Time Mchine to ON and it takes me to the screen that should have my time capsule...but it says "Set up other time capsule (set up a time capsule that is not listed here)"
I click on that and then clic on "Open Airport Utility"
I can see my Time Capsule. It has a green light on my computer and on the acutal machine. AirPort Utility says it found it and all the settings are correct. I go through until I get the end and hit FINISH.
(I have updated to Lion after Christmas..don't know if that caused the issue)
THere is no Time Machine icon on my desk top. Where is it?
Thanks!
Kara

kara1234 wrote:
when I do that I can see my "Kara's Time Capsule" on the very far left. Under "This pane shows your AirPort disks...there is nothing. It says No disks found
That being the case... Do as Eric Ross suggested and take it to your Apple Store for repair...

HT204350 Migration assistant in OS X Mavericks cannot find Time Machine disk

Well, the title says it all. My old Mountain Lion MacBook Pro had a harddrive crash and now I have installed a brand new SSD in it. It was not possible to use the Time Machine to restore the old system to the new disk during installation. So I thought, maybe it will work better after the basic system is installed. Nope. I can still activate Time Machine, but I can't regress even a single folder. And if I open the Migration Assistant it all goes well until I choose to use a Time Machine disk and then it just does not find any disk to use.
Of all the things you would expect from a specialised backup utility is that it should be possible to use for restoring a computer. If it isn't then why the **** have I been saving **** to it? I could have used the disk for a plain copy backup, a backup I could use.
I have seen a hundred of these threads when trying to find an answer. Has anyone found something that works? Has ******* Apple ******* fixed the problem somewhere?

In the sidebar of a Finder window, select the icon representing your startup volume ("Macintosh HD," unless you gave it a different name.) At the top level of the volume are folders with these names, among others:
Applications
Library
System
Enter Time Machine and select the most recent snapshot, which is behind the frontmost window. Are those folders present in the snapshot?

Airport utility cannot find time machine

Time Machine has orange flashing light and when I try to turn it on in system preferences, the computer scans for airport devices but finds none.

Have you do a reboot of the TC.. that will often fix things.
ie pull out the power cord.. count to 10.. plug in the power cord.. wait a minute for things to boot.
Does it show up now?
Or a full network reboot.. restart in correct order.. modem.. TC.. clients. 2min gap.
No luck then do a full factory reset of the TC.
ie pull out the power cord.
hold in reset button.
plug in the power cord. Do not release reset.
Front LED flashes rapidly after about 10sec. Release reset.
Wait for TC to boot up.
Use ethernet to computer to redo the setup.
Use all SMB names.. ie Short, 10-20 characters fine .. less is great.
No spaces.
Pure alphanumeric.
Nothing on the hard disk will change. But you might need to reset Time Machine and rediscover the backups.
See A4 here. http://pondini.org/TM/Troubleshooting.html

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'"

I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'" Any help is appreciated.

OS is important.. What OS is on Mac and what is on the working macbook?
Was the Airport setup from the Macbook? That might be why it works from there..
Does the AE show up in Mac airport utility?
Can you mount the disk in finder and copy files to it/from it??
Did you try a TM reset after mounting in Finder.. so you know it is available?
What about a network reboot.. does it work post a restart for a few minutes/hours/days???

When I try to install Time Machine update I get this message: You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer. I have OS X 10.5.8.

When I try to install Time Machine update I get this message: “You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer.” I have OS X 10.5.8.

It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310)

How can I see another mac backup on time machine?

how can I see another mac backup on time machine?

Bob thanks, but that didn't solve my problem, I went to question 17 and went into the Browse my Time Machine and it also didn't find or recognize the other Mac. I know it's in there because when I open the other Mac and Enter the Time Machine, I can see it through that Mac, and I have the same problem there, where I can't see my Mac.
In short, when I back up a Mac (doesn't matter which one) I can verify its backup as long as I use that Mac, but I cannont verfiy the backup on that Mac using another Mac and vice versa.
Also, I never used to have to do anything to see both on the same Mac. So I don't know what changed.
There must be another way.
Thanks

Having downloaded Mavericks to my IMac I now find Time Machine couldn't back up to the Time Machine HDD. I am using a WD 1TB independent Hard drive

Having downloaded Mavericks to my IMac two weeks ago, I now find Time Machine couldn't back up to the Time Machine HDD. I am using a WD 1TB External Hard drive. I understand that a number of people have lost data since installing Mavericks on their Western Digital external drives. Has anyone any futher info. Or is there a better way of backing up my computer. Thanks. Lee

Check the More Like This section at the right particularly i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Can I back up more than one mac to the time machine:

Can I back up more than one Mac to a time machine? I have a laptop and a Mac Desktop computer can I back up both on the same Time machine

Absolutely.
However, quoting from ASC contributor Pondini's excellent Time Machine FAQ:
It is advisable, though, to partition an external disk that will be connected to your Macs into one volume for each Mac ...

Can I restore my mac from a Time Machine backup once I have used BootCamp to partition and set up Windows (without erasing all of the Windows content)?

A few months ago I partitioned my mac using BootCamp and successfully installed Windows and a few Windows-only programs (games). I never restored my mac from the Time Machine backup and now I would really like all of my files back on my mac. I am wondering if I insert the osx install disc and restore from Time Machine backup, will that get rid of the partition I made for Windows? Will the Windows side of my hard drive stay in tact or will everything on that side get erased when I restore the mac side from the Time Machine backup. It was a HUUUUUUUGE pain to do the BootCamp partition and get everything Windows set up and I would really like to not have to do that all over again. I just want to make sure that if I insert the mac osx install disc and restore from Time Machine backup it will only affect the Mac partition, NOT the Windows partition.

Hi,
Time Machine does not touch your BootCamp Windows.
It simply said ignores it completely.
Nonetheless, I am curious as to why you wanna restore a Time Machine backup.
Usually during partitioning with the BootCamp Assistant in OSX to make the Windows partition your OSX stays intact.
Regards
Stefan

Recovering Mac HD via Time Machine Backup fails because "Restore system from backup" doesn't show in Utilities Menu of original install. DVD

Hi, after serious problems (troubleshooting didn't help) with my iMac G5 (PPC) running Mac OS X Leopard I've tried to recover my Mac HD via Time Machine (exactly as described by David Pogue on page 242 of the Leopard Missing Manual). However, "Restore system from backup" in the Utilities Menu of my original Leopard installation DVD failed to show up. What can I do?
Any assistance will be greatly appreciated -
Ballant

Hi Ballant,
I'm not very good with TM, nor a fan of it, but our resident king of TM, Pondini, has a vast array of very well done TM trouble shootings...
http://pondini.org/TM/Troubleshooting.html

HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Why can't i find Time Machine Back Up Device in Hard Drive

Why can't i find Time Machine Device in Hard Drive when i have plugged it already. White light just keeps on blinking.

Understanding and resolving a blinking status light
Here are the reasons that the status light may blink:
Your Time Capsule has detected that the internal hard drive has reported a SMART error
The base station has not yet been configured
The base station has been reset.
A new firmware update is available for the base station.
No IP address is available for the base station.
A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
The WAN Ethernet cable is unplugged from the Wi-Fi base station.
The Wi-Fi base station lacks a path to the Internet (or local router).
Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
A persistent, blinking, amber status light indicates that your base station may require your attention.
How to resolve a blinking amber status light alert
Launch AirPort Utility to determine why your base station status light is blinking amber.
AirPort Utility opens automatically if your Wi-Fi base station requires your attention. You may also choose to launch AirPort Utility at any time.
In the AirPort Utility window, locate your Wi-Fi base station and double-click on it to open the Summary window. Note: If you have more than one Wi-Fi base station, double-click on the icon for the Wi-Fi base station that has the amber circle next to it.
When the Summary window appears, double-click the amber circle to the right of Wi-Fi base station Status to open the Status window.
The Status window lists any conditions that require your attention. Respond to each item until there are no more items listed.
Eliminating the blinking, amber status light may require making changes to a specific setting, or putting a checkmark in the "Ignore" checkbox beside any option you don't wish to change. A checkmark simply tells the AirPort that you are aware of the issue and you have chosen to ignore it. For example, you may wish to leave your AirPort open without a password so that anyone can join your wireless network.
Click Update to apply your changes (the base station will restart).
After the base station has restarted, the status light should be green and not blinking. If the status light stays amber in color and blinks after the Wi-Fi base station restarts, you may repeat the steps above.

Can't finde time machine (windows)

I can't finde time machine at the internet to download to my windows computer.
i already installed time capsule, but i could not find the time machine. what should i do?
THX

There is no Time Machine for Windows. You need to use a third-party product capable of backing up to network drives.
(71687)

What does unable to print, cannot find time capsule mean?

What does unable to print, cannot find time capsule mean?

It is a communications error, read the posts to the right "More like this" maybe you will find some info there.

Mac cannot find time machine

Similar Messages

Maybe you are looking for