MAC CONNECTED TO INTERNET, PARALLELS SAYING LIMITED OR NO CONNECTIVITY!
When i start up parallels everything is fine, but it wont let me connect to the internet, it says 'limited or no connectivity' yet I am connected fine on the mac side.
Has anyone had the same problem or can they talk me through how to get xp to connect to the internet?
Thank you
1. Please make sure to install/reinstall Parallels Tools: remove any
entry of Parallels Tools from Add/Remove Programs, restart VM, install
Parallels Tools from Virtual machine menu
2. Try switching network adapter’s settings in Virtual machine’s
configuration from Shared networking to Bridged or vice versa
3. Check this Knowledgebase article: http://kb.parallels.com/en/5664
Similar Messages
-
My ipod touch shows it's connected to the internet, but says it can't connect to the server. How can I fix?
The machine is booting up so I wouldn't worry about the PRAM battery. I set my time off of the internet, since my pram battery is dead & I do not feel like changing it. click on time to get this panel.
The imac I have has 1.25GHz and I am assuming has an airport card because the Internet worked on it when I tested it out before I bought it.
To sort things out, I'd connect the machine via an ethernet cable to you router. Thus, if it works well via a cable you will have narrowed the problem down to the wifi card.
My wireless is on WPA/WPA2. How do I get the Internet to start working?
You sure the machine is connecting to your router not a neighbors? Set router to now encryption & see how things work. Just for testing. -
Router won't connect to internet, computer shows 'limited or no connectivity' message
Hi everyone, I could use some help. I have a Linksys WRT150N router that I bought a few years ago. It was working fine till about two days ago. I can't connect to the internet at all through the computer it's connected to or wirelessly on my laptop. The message 'limited or no connectivity' shows up on both computers. I tried resetting and unplugging the router several times, and I can't even access the router's settings using the IP address cause I need internet to do that. I know it's not my modem because when I connect it directly to the computer without the router, I can access the internet. So do I need a new router or is there something else I can do? Could my internet service provider have done something recenly so that it doesn't work with my router anymore? Please help, I seriously don't want to spend money on another router.
Who is your Internet Service Provider ?
If you are using cable connection then follow this link and if you are using DSL connection then follow this link. -
I get a unable tO download messge when i try to download ios6.1. I need ios612 to fix calendar bug....the message i get says that unable to download because no longer connected to internet....i am connected to the internet all along
1. Try reinstall iLIfe 09 from your install disk
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
If that fails, then you're reinstalling the OS. -
when I open iTunes it opens to my library but it won't let me connect to iTunes store says I'm not connected to internet but I am
Use the alt key to create a copy of an Arrange section by dragging it.
-
hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
Wireless internet does not work on EA6500 saying limited or no connectivity (With Solution)
I've had this router for about two weeks and all of a sudden two laptops in the house were no longer able to connect to the internet. They would take a really long time connecting to the router but you could nowhere on the internet with the message saying limited connection or no connection. Wired connections were working just fine.
I've been a Computer/IT Technician for the last 16 or so years so I've done all the firmware updates, resets and custom configurations myself before I even hooked up wireless devices to it.
That being said here is what I did:
My Father came to me saying he couldn't get on the internet anymore so I went and checked his connection and it said limited connection. I restarted the computer and that did nothing. I restarted the router and that did nothing. Now I'm thinking **bleep** I'm going to have to factory reset it. Before I did that I did a little bit of web research and found a program called inSSIDer that I used to check how many people were using channel 11. There were quite a few people using channel 11. I changed it to channel 7 because there was only 1 other person using that channel. As soon as I changed the channel both laptops connected to the router quickly and were on the internet.
The thing I don't get is why was it working really good for the last few weeks and then all of a sudden it wasn't. Did everybody buy a new router last month and go right to using channel 11? I've never had a problem before that I remember where I had to change a router channel to fix the connection issue.
I hope this helps someone out there.
-Uilleam
Been messing with computers since back when they were TSR80's and Commdore64's =)Have you tried changing the wireless channel that the hub uses? Its possible that someone nearby has just started using the same channel as you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I ran this update on my Mac. Everything else seems fine BUT mail isn't connecting to the servers. I've opened connection Dr. says I'm connected to the internet but none of the servers e.g., gmail, or yahoo will connect anymore. What do I try?
About the OS X Mavericks v10.9.5 Update This is the update I just ran.I just went back through and went through the port settings after looking up what should be there. Why were some of them different after the update?
I did make a couple changes to the port #'s and restarted my computer again.
I opened the connection Dr. says my internet is fine but still not receiving or sending email. still shows that email is not connecting.
I know the esp's work ( I finally figured out esp vs isp) My email is up and working on my iPad so it is working MUST be a setting.
it is 3:45 my time and I'm off to work for 4 pm - so this is another 3 hours of reading and working on this to try to reinstate my emails on my home computer. Thank goodness my iPad wasn't mucked up too.
I'll go through with a fine tooth comb after work at 10 tonight.
I appreciate your help. -
Wifi connecting, after browsing it says i am not connected internet
aight i know theres alot of posts with wifi connecting problems, but i couldnt find a post similar to my problem. my problem is: my wifi on my ipod touch recognizes and connects to my internet (wep encryption) at home. for example- i go to yahoo.com the page loads completely but when i try to click on article it says "safari not connected to internet" but i am and i have a full signal bar. it loads to google but when i try to keep browsing it says "safari not connected"........? i tried everything from wat other ppl have said, reset router, turn off key encrpytion, reset my ipod, try turning on off my wifi, STILL NOT SOLVED. am i doing anything wrong? i really need help.
the guys at apple had no idea how to fix it. some networks i have no problem with works completely fineHi
I'm facing the same problem as yours.
I've seen lots of posts reporting the same problem, and Apple just doesn't seem to be worried about the problem.
Maybe everyone should keep in mind that iPod Touch is a limited equipment for internet access (and not the wonderful gadget they announce).
As long as users keep on buying iPods, a user's problem is not an Apple's problem. -
Though I am connected to Internet Firefox says ofline mode
I am running on Ubuntu 13.04 (kernel 3.8.0-19-generic)
I connect to internet Using Huawei E303 and it's In built Driver Software( Mobile Partner )
When I connect to internet using mentioned device firefox says it s in Offline mode.
But If I refresh 5-6 times it connects to internet. But google-chrome connects at first timeall other applications use internet seamlessly.
I thought this might be a proxy issue and I Checked for that; and applied no-proxy system wide.
Firefox connects only after 5-6 times refreshing.You're welcome
-
Safari says I'm not connected to Internet-Airport says I am w/good signal
I've moved. I am using AT&T DSL as Internet Service Provider. My PC/Base station is running VIsta Home. The Base station router is LINKSYS Wireless-G Microsoft Broadband. It's all interfaced beautifully before with my iMac and MacBook Pro.
Since the move, However, I've had a problem. The "Internet Connect" on my MacBook Pro shows I am connected to Linksys. The signal strength has all bars lighted blue. The tool bar "fan" has also bars black. However, when I click on Safari the display reads 'Safari cannot open the page because you are not connected to the internet." The PC Base station (from which I am writing this note)is on the Internet using the AT&T DSL connection, and apparently the MacBook Pro reads the wireless signal, too. Never had this happen before to any wifi signal with my MacBook Pro...any ideas what is causing the conflicting reports? Thanks.Hi, a few ideas...
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot
Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Another thing that has worked for many is to just copy/duplicate that Location in Network>Location>Edit Locations..., then use that one.
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers. -
I use to buy music now i cannot connect to istore it says i am not connected to the internet
i used to buy lots of music now my istore says i am not connected to the internet..what happen
See this article.
http://support.apple.com/kb/ts1368
B-rock -
When trying to connect to internet, my i6 phone says "Safari could not open the page because the server stopped responding." However, our house's wi-fi is on. Any ideas why this is happening?
Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
So I have been using my imac for 15 months. Never had a problem with going online. Until yesterday. Now its impossible. I am connecting via a linksys router (model WRT54G2) version 1.5. I have tried resetting modem, router. Nothing. Keep in mind my PC, iphone, ipad all connect fine to the wireless signal. It is only the imac that won't connect. The strange thing is when I check network settings it says it is connected to a linksys router at full strength. But when I click Safari, it says I am not connected. I am completely at a loss. Any help is much appreciated as Apple wants to charge me $50 for tech support, linksys $40 and Cox Communications $75. I love the lack of customer service.
I resolved a similar internet connection issue at a friends house recently, the problem was the router was set to only accept 5 wireless devices. This was not an issue before, but soon as his sons got a new wireless phones and a Mac Book Air, it used up all the available DHCP connections from his router.
His computer had the same issue,
- was connected,
- had a 169.xxx.xxx.xxx address
- did not have the DNS or router address in his current network settings.
The key point here is the same as yours, that all other devices were connected and could surf with Safari, except for that one device, in your case the iMac.
I determined his problem by manually assigning a 192.168.1.x IP address, subnet mask of 255.255.255.0, dns for his ISP and router address of 192.168.1.1. This worked, however it wouldn't when set to DHCP... went back to a 169 address.....
The real problem, the router was config'd to allow only 5 dhcp addresses to be giving out, once the 6 device tried, it would show a wireless full bar connect, a 169 address and wouldn't connect to the internet as Safaria stated it wasn't connected to the internet.
The real fix is to raise the number of dhcp wireless devices to a higher number, or possibly shorten the lease times so others can connect. He couldn't remember the password he changed on the linksys, so I left the network settings on his 6th wireless device in manual mode till he does remember the linksys password.
I bet thats was your case too. Linksys/Cisco is one of the best routers out there, I'd use airport Apple's second, and would not recommend NetGear because of support and technical issues in the past. -
Apple devices can't connect to Internet on an iMac PPPoe DSL connection
Hi, I am using a time capsule and have it connected to the DSL using PPPoe. I have Internet access on my iMac desktop. I have also set up the airport utility with the same configurations and password that the PPPoe required. My iPad and iPod Touch both can see and connect to the airport wireless configuration that I set up. However, these two devices cannot connect to the Internet. Can anyone shed some light on this issue? I have looked on several forums but could not find a solution. The backups are working fine. About this Mac - version 10.5.8.
P.S. Can't wait until the Lion OS comes out!You want the device that is directly connected to the modem to furnish the PPPoE service.
This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Your settings should look like this:
Connect Using = PPPoE
Account Name = Your user name with your ISP
Password = Your password with the ISP
Verify Password
Service Name.....leave this area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings and the TC will restart
Either delete the PPPoE connection on your Mac, or if you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
Wait a moment or two, then start the modem and let it urn for a moment by itself
Start the TC and wait for a green light
Then start each device one at a time until the network is back up
Maybe you are looking for
-
Inventory Management for virtual products
Hi, Can you please let us know how the virtual products like mobile recharge coupons, lottery coupons are managed in IS-Retail? There is no physical inventory involved in this case but we have the purchase cost, commission and other components involv
-
I wish to set up an alias address on my iPad. My iCloud address has already been established and I can find no way to get into my account to add any alias.
-
Unable to sign in from Sony XBR55X850B
When attempting to sign in I'm getting a message "Skype has been temporarily disabled on this TV and you cannont sign-in at the moment. An update for this TV will be available in a few weeks. For more information visit skype.com/support". Though
-
Flash Keeps Quitting When Opened
This is the error I get when I try to open Flash Media Encoder. Can someone please help me, I'm trying to stream to twitch Process: FlashMediaLiveEncoder [306] Path: /Users/USER/Desktop/*/FlashMediaLiveEncoder.app/Contents/MacOS/Fl
-
So I have the standard operating system that already came on my macbook pro. But I am thinking of doing a software update and am torn wheter to go with Lion or Snow Leopard? Which one works better? And should I even get a software update?