Mac goes straight to OS X Utilities. Please help

Hi. I have a 13" macbook pro mid 2012. I recently tried to update to mavericks but my download failed. I shut down my mac after a while and when I restarted it took me to the OS X Utilities screen. Its giving me options to restore, reinstall OS X, get help online or a disk utility.
I don't have a backup and don't want to lose all my documnets . Tried verifying the disk and it says everything is OK. Please any help will be brilliant. I have no idea what to do. And a step by step guide would be brilliant as I'm not familiar with all the Mac commands. thanks.

It sounds like the download may not have failed but the installation did so the only thing left that your MBP can boot from is the Recovery partition (see this discussion). Since you don't want to loose all your documents and you don't have a backup to restore from, I can think of a few things to try.
Reboot and hold down the option key to see what the MBP sees as bootable. If it's just the Recovery partition, that's where you are.
If there's a second choice (e.g., Macintosh HD), and it doesn't boot from that, try to reboot and hold down the shift key to start in Safe Mode.
Getting more extreme would be to get an external drive and Reinstall OS X on it so that you can boot from it and copy over your documents from the internal drive using Setup Assistant.
FInally, you could reinstall OS X on the internal. That should get Mountain Lion working again without damaging the rest of your files.

Similar Messages

Mac book crashed restart screen OS Utilities please help

My cursor froze and upon restart screen OS Utilities appears
please help

boot from dvd/recovery partition and repair drive with Disk Utility

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

After cleaning my mac it opens and shuts down again please help!!!

after cleaning my mac it opens and shuts down again please help!!!

I opened the cover (there where the battery is) and I cleaned the dust gently with a dry napkin ...remove the battery and placed it again ...closed the cover and when i turn on my macbook bro now it shows the Apple logo and after some seconds it just shuts down (i have OSX 10.9 Mavericks)....
I tried to boot in safe mode, also tried to repair it and even re-install Mavericks and so on, but I could not fix it. I did a hardware test and the no problems occurred.

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air. I can connect to samsung soundbar with my mac but the connection drops immediately. Please help MacBook Air, iOS 10.9.4

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4

Contact Samsung for help.
Barry

How to install coreldraw withMacbook pro using Mac OS X Lion 10.7.5. please help.

how to install coreldraw withMacbook pro using Mac OS X Lion 10.7.5. please help.

Once again as Sig said a Google search produced
http://en.wikipedia.org/wiki/Comparison_of_vector_graphics_editors
as the results which is a comparison of the vector drawing packages currently available.
You really need to start using Goole search.
Allan

How i display mac app store downloading progress bar ? please help, how i display mac app store downloading progress bar ? please help

how i display mac app store downloading progress bar ? please help ?

it does not respond every time i hit download button,nothing appers

When turning my MacBook Air it goes straight to OS X Utilities and telling me to reinstall OS X

I had some software to update so I updated and it told me to restart so I did that and it didn't log into my user it went straight to OS X utilities , it wants me to reinstall OS X .
I restarted the MacBook 100 times already but same thing over and over , another weird thing is when I turn it on instead of the apple logo coming up there is a circle with a line threw the middle for a few seconds and then the apple logo comes up.
I have so much stuff I need on my computer and I didn't back up anything stupid of me !!
I hope someone will know how to resolve the issue with out loosing any files Thanks

If the Safe Mode boot won't work, you can still copy your whole drive using Disk Utility.
Press the power button and as you hear the bong,
       then hold down the Command and R keys.
      • If it won't boot that way then try a network boot
        (power then command-option-R keys).
            If that won't work then you need professional help.
                Get thee to an Apple Store or Apple Authorized Service Provider.
          Once booted, click on Disk Utility.
To format (and erase) the destination recovery disk:
          Plug in the drive you are about to erase.
          Select the volume that is NOT your system disk.
          Click on Partition.
          Pull down under Partition Layout to 1 Partition.
          Click on Options…
          Select GUID Partition Table.
          Name: Emergency Recovery
          Format: Select Mac OS Extended (journaled)
          Click Apply.
          Click Partition.
Drag and drop the named system disk to Source:
          Drag an drop Emergency Recovery to Destination:
          (Do not reverse these directions.)
          Click Restore (the lower Restore button).
If the procedures above do not work:
Genius reservation http://www.apple.com/retail/geniusbar/ .
          Or find an Apple Authorized Service Provider https://locate.apple.com/country
If they do work (once you have secured your data on a backup drive), try resinstalling OS X.

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

Switching from Windows to Mac. Is it worth it? Please help!

Hey everybody,
I think I finally made my decision to switch from windows to Mac,..the I-book. G4 (not the power book). The I-book I want is around 1299.00, with the wider screen,..than the smaller i-book.
Anyhow,.what led me to this decision was just sending back the Sony FS series. It was sleek beautiful and"white" like I love,..but the speakers were awful. I have just about given up on trying to find a decent notebook. I love the look of the i-book,..but cant get that gorgeous wide screen from Sony out of my mind. It was more than the speakers. Just too noisy. Anyway...if you bought this i-book all over again,..would you? Alos I have a brand new Linskys Router with the built in Security. Would the Macs intergrated wireless card,..work with my router?
Please help!
Lil
planning on getting this notebook. Need advice

I'm afraid you're not exactly going to get an unbiased opinion here
As a long-time Mac fan (back since System 6) who was forced into a PC world man years ago, OSX has re-kindled my passion for computing. I'm an old Unix guy and OSX has combined the best PC operating system with the power of Unix. To the average user who doesn't care about shell scripts and porting free applications, what you'll get from Unix is a tremendous amount of reliability and security...
One of the best reasons for anyone to switch to the Mac was summed up in a post over on iLounge as a reply to someone who was switching. When asked why anyone would switch, one reply simply said, "...because he realises that a computer should be a productivity tool, not a virus scanner."
In the year since I've bought my Mac Mini, the only failure I've had has been a crash of Virtual PC (an emulator that will allow you to run your old Windows-based applications), which took the virtual disk out and forced me to reinstall my Windows environment. That's nothing different than I've experienced countless times on my old PC.
That said, I'm looking at a 12" iBook. I didn't even consider the 14" because I don't want something larger that doesn't give me extra screen real-estate. I debated the 15" Powerbook but decided I don't really need it's larger screen, and I'd rather have something more portable. There are companies out there that sell dual-layer DVD-RW drives that can be installed in an iBook (even the 12" Powerbook only ships with a single-layer DVD burner).
512mb should be plenty, unless you plan on editing video or running Virtual PC--in which case, I'd recommend at least a gig.
Mini Mac OS X (10.4.3) 12" iBook + 2.3ghz Powermac on the way! Former Newton OMP user.

Removed System Library files, Mac won't boot up!? Please help!

Ok so I moved to trash the Library folder from the Systems folder. I only had like 15 mb left on my iBook so I was trying to remove files. But then I thought it might be a bad idea to delete the library folder so I tried to drag it from the trash but it wouldn't let me. And then my computer started going really slow so I rebooted, but a error message came up and it said something like "we are hanging here" now when ever I try to reboot it shows that message. I tried loading it in single-user mode and typing in some code that worked last time something like this happened, but it wouldn't let me type anything in single-user mode.
Now I'm stuff and have no idea what to do. Please help!

Your only option is to reinstall OS X. The lesson of the day:
Never move, rename, or delete any system files or folders including the System and Library folders.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Ever since the last IOS update, my Iphone 5c has been acting weird. The time is always off; It says that its 9:30 in the morning when it's actually 2pm. I try to fix it, but it just goes back to not working. Please help!!

I go to settings and switch "Automatic time" off and then back on. It works for a while, but then just goes back to being off. I've tried manually setting the time, but it just goes back to what it was before. If I send a text, it sends and then disapears. I can't see what I wrote! I went in to Apple to try and get it fixed, but they just restored my phone. It's still not working. Please help!

It's not hacker or a virus. You are experiencing what a number of users of iOS 5 are experiencing now - sluggish or less than perfect iPad performance. It seems that for some of us - memory management has gotten a little out of whack with this most recent update. Some of the basic troubleshooting steps that you can try are ....
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Close apps in the recents tray. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you have Safari crashing issues - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
None of these steps should be necessary as part of your daily routine - the iOS is supposed to handle all of this without any user input. Once again - for some of us - the iOS is letting us down.
Until Apple releases another update that resolves this issue for the "few" that suffer, keep these steps in mind and use them as needed.

HT203433 Hi! I am so stumped with having multiple apple ID accounts now when I try to do an update on my iPhoto app it tells me to log into the account I used to purchase that app. I have tried going into my other accounts. Please help.

Hi! I am so stumped with having multiple Apple ID accounts. I did this not knowing what I was doing and now I can not update my iPhoto app because it tells me to log into the account that I used to purchase it. I thought I was trying to do this but I can't get anywhere.
Please help!
Flora

Hi Florafromco,
You can view your iTunes Store account and request assistance by following the instructions below:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
I hope this information helps ....
The following article will provide a little more information regarding using multiple Apple ID's:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I hope this information helps ....
Have a great day!
Have a great day!
- Judy

A mac trying to talk to a PC - Please HELP.

Mac is set up with ISIGHT/ICHAT
PC is set up with LOGICTECH Quickcam Fusion/AOL Instant messenger.
So we can text message and we can even do an audio chat. But when it comes to Video it does not go through. When I(the mac) invite the PC, the PC sees the invitation and will accept. My window will even say that it has started the video chat but I cant see them, only myself.
When they invite me I never get the invitation and they just sit on there side.
Any ideas. Please help
thanks jack

changed forums

Mac goes straight to OS X Utilities. Please help

Similar Messages

Maybe you are looking for