Mac Mini LCD Display - finally got it working but....

Hello,
I've posted on here many times about using the mac mini with my LCD display. The display runs at 60hz and a 640 x 480 resolution. For about four weeks, the mac mini would not connect to my screen. I installed display config x and had something of a result. By loading the mac mini up with my old pc monitor plugged in and then switching the vga plug once the mini was loaded, I managed to get a picture!
Just when I thought my troubles were over, I realised that when the mini went to sleep, if I woke it up I had exactly the same problem. I would have to plus it into my pc monitor, wake it up then switch it with my LCD VGA cable.
Is there anyway round having to do this every time I want to use my mini?
Thanks
Mark

Check out the manual for "Autoload" -- that's the name of the song file that's automatically loaded each time you start Logic or create a new file. You may want to look at some of the Peachpit books for walking you through creating this file to match your studio and workflow.
Use Caps Lock to bring up a little keyboard on the screen that you can play with your computer keyboard.
To change a track's icon, make sure you can see the track's info in the Arrange window. First select the track you want to work with. Pressing P toggles the properties column on the left. You may have to open up one of the areas using the little drop-down triangle thing, but you'll see an icon for the track in the properties area. Click and hold it to bring up a list of icons. You can create your own icons in the png format. Read the manual if you want to add your own images to Logic's standard icons.

Similar Messages

OK Finally got it working BUT!

well my replacment xskey arrived (hooray!) so now im working with logic finally, i have a few questions tho...
1. how do i set logic to open a new project with the standard 8 audio tracks and 8 audio inst tracks? atm mines only coming up with 4 audio, and it has 8 audio inst but it go's down 1 2 3 4 1 2 3 4.
2. how do u get the keyboard to work like as a midi keyboard (ive heard theres a way)
and 3. how do u assign audio channels small pictures of the instrement at the left hand side?
cheers!
james

Check out the manual for "Autoload" -- that's the name of the song file that's automatically loaded each time you start Logic or create a new file. You may want to look at some of the Peachpit books for walking you through creating this file to match your studio and workflow.
Use Caps Lock to bring up a little keyboard on the screen that you can play with your computer keyboard.
To change a track's icon, make sure you can see the track's info in the Arrange window. First select the track you want to work with. Pressing P toggles the properties column on the left. You may have to open up one of the areas using the little drop-down triangle thing, but you'll see an icon for the track in the properties area. Click and hold it to bring up a list of icons. You can create your own icons in the png format. Read the manual if you want to add your own images to Logic's standard icons.

Connecting mac mini to USB monitor didn't work!!

I connected new Mac mini(2007 model) with the latest HP USB monitor. Nothing got displayed on the monitor. Then I need to connect mac-mini to another VGA connector monitor. But still want to know to connect USB monitor with mac-mini as this is my target setup.

Thank you.
I used Tiger OS specific drivers from the following link.
www.displaylink.com/support/mac_downloads.php
Now it's working but not 100%. Upon starting of the mac-mini monitor works fine. But later when I switch off and switch on the monitor, then it doesn't work. Looks like monitor off -on trigger is not handled in the driver.
I will check with the driver like you have suggest and then acknowledge.

Would a 256 GB SSD on a 2012 Mac Mini significantly improve Final Cut Pro X Performance?

Would a 256 GB SSD on a 2012 Mac Mini significantly improve Final Cut Pro X Performance?
I'm considering a 2012 Mac Mini 2.6 Quad Core with 16 GB RAM and a 256 GB SSD with external Thunderbolt drives.
I understand that Mavericks allocates 1GB VRAM from system memory in a 2012 Mini with 8GB RAM.

It will only improve the read and write performance, and this is not as important as the processor and the GPU in Final Cut Pro.
The Mac mini has got an integrated GPU that may work if you are a home user, but if you are a professional user, you should consider an iMac, a 15-inch MacBook Pro or a Mac Pro. You won't notice a big performance increase

Would 256 SSD on 2012 Mac Mini significantly improve Final Cut Pro Performance?

Would a 256 GB SSD on a 2012 Mac Mini significantly improve Final Cut Pro Performance? I'm considering a 2012 Mac Mini 2.6 Quad Core with 16 GB RAM and a 256 GB SSD with external Thunderbolt drives.

It will only improve the read and write performance, and this is not as important as the processor and the GPU in Final Cut Pro.
The Mac mini has got an integrated GPU that may work if you are a home user, but if you are a professional user, you should consider an iMac, a 15-inch MacBook Pro or a Mac Pro. You won't notice a big performance increase

Mac mini and displays problems

I cannot get my mac mini to display properly on either my old NEC 30" mulitSync, (using a new HDMI/DVI cable) or with a new ASUS monitor. I have tried a multitude of resolution settings but none work

Hi, what resolution are these Monitors, HDMI port only supports 1920*1200 max.
Higher would require an MDP/TB to Duallink DVI adapter.

Does anyone have a Mac Mini (MID-2007) with wifi that works?

Does anyone have a Mac Mini (MID-2007 C2D) which wifi works?
It seems that Mac Mini has different models and some have a Broadcom Wifi card and some Atheros WIFI card. I'm trying to find user whom Mac Mini 2007 with atheros card works. Since os x 10.6 and 10.7 my wifi have not worked at all. I even changed internal antenna. Also attached external antenna on WIFI cards ext port. Still very poor connection. Also sometimes when my mac wakes from sleep country code of WIFI card is US not FI as rest of my family macs. WIFI is made with apple extreme router (802.11n). 2.4 and 5 Ghz networks. I do not have network interference. With Minimac Atheros card has support b and g network with 2.4 Ghz and a network with 5 ghz. Signal ratio is average -80 dbm, and speed varies from 6-36. Both a and g networks work same way on minimac. When I turn machin on wifi is usable about 1-2 minutes then latency will rice and after that timeout will occur on network. Still mac mini is connected to network.
Atheros firmware is: 5424: 2.1.14.9
Card: Airport Extreme (0x168c, 0,86)
Location: ETSI
Country: FI
Security: NONE
PHY: 802.11a
There are a lot of guides on net how to get it working; eg. change older OS kext, remove preferences, install os again (done all that, nothing works, but older kext files seem to work little better). But does any one have a Mac Mini with working wifi. What brand is your router and is the card in minimac original Atheros. Broadcom seems to operate Apple Extreme router quite well.

My Mac Mini Mid 2007 has the same specs:
Card: AirPort Extreme (0x168c, 0x86
Firmware: Atheros 5424: 2.1.14.9
Ever since I upgraded to 10.7.2, my WiFi has been running painfully slowly. Same issue: it works okay for a minute or two, but then slows to a crawl, with network timeouts, etc. And it shows I'm still connected to the network. It gets particularly bad when waking from sleep, unless I quit my web browser first, then put the machine to sleep. (Waking the machine with browser still "launched" causes big problems.)
Has anyone figured out a workaround for this issue?

I'm trying to set up Continuity with mac mini and iPhone 5s and not working

I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

Your Mini is not supported.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

Mac Mini not displaying on two screens - was fine, but now it is not!

Hello,
At my work we have a Mac Mini running Keynote with videos and various slides looping round, displaying on a LG 42" LCD screen in our display window. On the other side of the window - the bit the public does not see - is a monitor to start the presentations and run the computer.
This was working fine, running both screens simultaneously. However recently, it had to be turned off to carry out some work in the display area, and a few days later upon setting it up again its not working with both screens.
The mini boots up and will run fine @ 1024 x 768 60hz on the inside monitor. This is connected to the mini DVI port, with a DVI to VGA adapter. However, when I plug in the LG 42" LCD at the same time (Connected via the mini display port, to an HDMI connector/adapter, the monitor will change to display an "out of range" message, while the LG will display as normal.
I really need both screens running simultaneously as they were before! Nothing has changed in the setup and both screens will run fine by themselves, so I know that they are functioning correctly.
Any suggestions are much appreciated!
Any thoughts

It sounds like perhaps the displays got set to mirror mode somehow. This means both displays are trying to display the same thing instead of working independently as you want them to.
Which screen is set to primary, e.g. which one shows the menu bar when both are active? Are you able to get into Displays preferences and make changes? If so, I would check the mirror setting.
Something else that may be worth trying is to start the mini in Safe mode with both displays connected. Hopefully the result will be useable screens on both displays. If so, go into Displays preferences and set the respective displays to the desired setting and restart normally. The selections made under Safe mode should persist through a normal restart.
http://support.apple.com/kb/HT1455

Mac mini 09 Display Resolutions odd via DVI -- HDMI

Hi I've got a LG 1366x768 commercial display and it works great with an Apple TV, MacBook 2007 or MacBook Pro 2008.
However when I unplug the MacBook and plug in the New Mac mini, it gives a completely different set of resolutions - none of which work properly on the display.
When overscan is chosen on the Mac mini, it chops off the top of the menu bar. Overscan is on the MacBook and MacBook Pro and it looks perfect.
Everything is blurry no matter which resolution I choose on the Mac mini. Everything is crisp with the MacBook and MacBook Pro. This is a serious problem....
Tried switchresX and it's no help.
Anyone else using one for their home theatre with a HDMI setup?

Which LG model is it? Which HDMI jack (HDMI1, HDMI2) on the TV are you plugged into?
Some LG commercial TVs have a different internal mode for the inputs that has to be changed in the TV menu. If it thinks it is a true HDMI signal, it will automatically overscan it for you resulting in things being cut off and looking fuzzy. You have to convince it that you really want to be a PC type input that just happens to be over HDMI in order for it to display on all visible pixels. Depending on the model, you may have to plug into a specific HDMI port to even make that possible.

Brand new Mac mini ONLY displays when waking from sleep

Have an unusual problem.
Brand new 2011 Mac mini. Turn it on, and I do not get the grey Apple logo screen or normal spinning cog. Light comes on as normal, and chime chimes as normal. I've tried three different monitors now and I never get a display, unless I put the mini to sleep with the power button in back, then wake it with a keyboard key stroke, the display turns on and works as normal.
As of 20 Sep 2011, I've got all the software and EFI updates installed. I've also reset the PMU, SMC, PRAM, and NVRAM to no avail.
Thanks.
DJ Horton
Message was edited by: DJ Horton

Yes, sure did. Tried different cables and Thunderbolt to video adapters. Don't know if it makes a difference, but I'm using VGA. Originally tried it about a week ago with DVI and it worked ok. The problem is the monitor we're using in our classroom doesn't support DVI or HDMI.

Mac mini 2011 display going black

I just got my new core i7 + SSD 2011 Mac mini. I noticed during initialization of Lion and during a reinstall of Lion that my screen would flash to black for a second or two. A few days after installing Lion I still get this random flash a black a few times throughout my sessions. It usually only does it 2 or three times withing 10 minutes of turning on the the computer, then it seems to be fine. One time it flashed a few times and then the display went all distorted and pixelated. To fix it I ended up having to disconnect my 24" Cinema display and reconnect it. This whole display issue is really annoying.
I found this so I hope Apple is working to fix this issue:
https://discussions.apple.com/message/15843631#15843631

Shutdown the Mini, turn off the display, disconnect and reconnect all of your power and display connections ensuring that they are fully seated and snug.
It could also just be that the display going to sleep and then rewaking.
1. Go to: System Preference / Energy Saver and check to see if your Display Sleep slider didn't maybe get set to under 3 minutes.
2. Go to: System Preferences / Exposé & Spaces / Exposé and see if there isn't a Hot Corner set to "Put Display to Sleep" that you pointer might be going to.

Apple Support for purchase of AppleCare for Mac Mini / Cinema Display Combo

Below is an email that I recently submitted to Apple for feed back on the support system. I am writing here to find out if anyone might have any ideas about how to address this issue without resorting to a 2 hour wait on the phone (my last experience with Apple support). I have redacted some info with ID's and Case numbers as I know Apple does not actively monitor these forums so it would not make sense for them to be posted.
Here is the question:
How do others in the Apple community feel about the points that I make in this email? I am curious to know if I am off base in my expectations or if what I am requesting is reasonable?
Here is the email:
As someone who has spent 15 years as a web professional and has purchased/approved for purchase more than $1 Million dollars in Apple products, I have to say my recent experience with Apple customer service has been incredibly lackluster and almost insulting. Here is the issue that I am trying to resolve (not why I have written this email):
I recently purchased a mac mini and cinema display and in addition purchased apple care for both. I only received confirmation of apple care for the mac mini. Hence I have an issue.
Fail #1) I was asked when trying to register the apple care I purchased at MacAuthority, that I need to upload a receipt. I uploaded said receipt and then waited. Some time later I recieved an email (Jan 21) with with the following information - Case ID: XXXXXXXXXX / AppleCare Registration Number: XXXXXXXXXXXXX / Product Case ID: XXXXXXXXXXX saying my information had been received. I then responded to the email (Jan 21) saying that I did not see an option during the registration for registering both the monitor and the mini. I figured this was based on the registration number and maybe just did not show in the front end. I then waited 7 days to send another email (Jan 28). No response.
I typically spend my evenings taking care of things like this, as I can almost always address them through a couple of emails and it is done. I don't have time to sit on hold during the day waiting for a live person. Especially when I am doing work that ensures I can buy the product of the company I am waiting on hold with. Instead I try to rely on the most efficient method, which most companies have realized is email communication, when it is implemented properly.
Fail #2) Rather than making a call to Apple Support on my dime (during the day), I instead head over the support site thinking that at a minimum I would find a contact support form or an auto ticking email address. Heck maybe I would even be able to look up the case ID. To my surprise, there was no contact form, there was no support email address.
Fail #3) I then started hunting for the next logical step. I saw the link to the Express support and thought - "ah cool, they have a routing system to get my need to the right person/department". Errrrrr - wrong. Although that is what it appeared to be, in the end I was presented with only one option. Call back later. Seriously. SERIOUSLY
Fail #4) Now, after having spent more than 2 hours of my time trying to get this issue resolved, I am still going to forced to talk to someone on the phone. This is so incredibly insane for a modern web business who supposedly is fanatical about their customers!
I surely hope that this changes or my last purchase will be MY LAST PURCHASE. I have had so many experiences in the last 3 years that made me feel like I was inconveniencing "Apple". I am about to give up on the brand. There is a "greedy" feeling that I get when dealing with Apple rather than on of "wonderment"
There are lots of other options that I know provide a better customer experience. Why would I choose Apple over them? I dropped the iPhone for this reason and went to Android after having multiple issues with a support need that later ended up being a known hardware issue with the iPhone 3G.
I currently own two mac mini's, 1 cinema display, a 17" loaded MBP, a 15" loaded MBP, two airport extremes, an airport express and an iPad. I have spent over $11K with Apple personally in the last 2 years and I cannot get an option to contact someone by email or file a trouble ticket?
I truly hope someone has taken the time to fully read this email, as I cannot imagine that this is the message that Apple wants to send to its customers. If you have read this and can be so kind as to respond, I will gladly give you some other insights about how Apple can better serve its customers. If you can help me with my support issue, even better.
Jamie

Fail #1) I was asked when trying to register the apple care I purchased at MacAuthority, that I need to upload a receipt. I uploaded said receipt and then waited. Some time later I recieved an email (Jan 21) with with the following information - Case ID: XXXXXXXXXX / AppleCare Registration Number: XXXXXXXXXXXXX / Product Case ID: XXXXXXXXXXX saying my information had been received. I then responded to the email (Jan 21) saying that I did not see an option during the registration for registering both the monitor and the mini. I figured this was based on the registration number and maybe just did not show in the front end. I then waited 7 days to send another email (Jan 28). No response.
It's not clear to me on what information you were expecting from them. Did you, however, check the status of the coverage here to see if perhaps the coverage was registered correctly?
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Fail #2) Rather than making a call to Apple Support on my dime (during the day), I instead head over the support site thinking that at a minimum I would find a contact support form or an auto ticking email address. Heck maybe I would even be able to look up the case ID. To my surprise, there was no contact form, there was no support email address.
Apple does not provide support via email (except for the iTunes Store) and never has. Whether or not you wish to consider this a "fail" is your call, but they have always provided support only via the phone except for a short experiment with live chat which I believe they've abandoned.
Fail #3) I then started hunting for the next logical step. I saw the link to the Express support and thought - "ah cool, they have a routing system to get my need to the right person/department". Errrrrr - wrong. Although that is what it appeared to be, in the end I was presented with only one option. Call back later. Seriously. SERIOUSLY
Seriously. Though I think you misread. The option is available for you to set up a time when they can call _you. Or you can just elect to call later. It's your choice which you select.
Fail #4) Now, after having spent more than 2 hours of my time trying to get this issue resolved, I am still going to forced to talk to someone on the phone. This is so incredibly insane for a modern web business who supposedly is fanatical about their customers!
See number 1.
I surely hope that this changes or my last purchase will be MY LAST PURCHASE.
Suit yourself. I very much doubt that Apple will change their policy, since it's been the same for many years. There's nothing anyone here can suggest to change things or address them differently. You'll have to talk with them on the phone if the registration didn't go through as expected. Again, you can set up a time when they will call you so as to avoid waiting on hold.
Regards.

Mac Mini LCD Display - finally got it working but....

Similar Messages

Maybe you are looking for