Mac Mini OSX Server Version and installation

I am very interested in the New Mac Mini with OSX server configuration.
But I would like to know what is the difference between the "Retail" OSX server version and the "Bundled" OSX server version which came with the Mac Mini ?
Can the "Bundled" server version be installed on another intel-based Mac ( in case of hardware failure in the Mac Mini ) ?

The difference is that this is server software, it is not the Mac OS X client software for day-to-day use on a Pro or Consumer Mac.
The bundled software according to the Mac mini Server specs page is on an Install/Restore DVD. These are usually machine specific so it will not be usable by directly placing it in the ODD of another Mac, it should spit the disc out as unusable. But there are ways to connect the Macs and install the software to another Mac. However, the End User Agreement licenses the software for installation on only one Mac at a time.
Dah•veed

Similar Messages

Why do new hard drives keep failing in Mac Mini OSX Server?

Why new new hard drives keep failing in Mac Mini OSX server?

If it only failed in 8 days.. I just return the drives back to newegg and get a different brand like western digital. NewEgg has a 30 day return policy.
If you deal with any hard drive manufacturer now, they will give you a refurbished item and not a new item that you are entitled.
As for testing hardware....
http://support.apple.com/kb/HT1509
even if it still passed Apple tests.. it does not mean logicboard is fine..... it just means it passes the tests.
At this point, If i were you, I would just go back to NewEgg and send back the Seagates letting know they are bad and prefer a different brand such as Western Digital.
Install the Western Digitals and see how long they last. If they fail again in a a short amoung of time, it's the logicboard then.
This is based on experience in dealing with repairs with Macs, PCs, and other various kinds of Servers and computers over the last 10+ years.
In fact, One of my clients who has a Dual 4-core Intel Xeon Server with a Supermicro logicboard, one of their SATA drive ports are bad. Every 4 months like clock work the Mirror RAID Drive would degrade on that port. Then after figuring out that the drives are not necessary bad, I swapped to using another spare SATA port and since then no problems.

I have a Mac Mini late 2012 version and i am trying to reset to factory setting.

Hello, I had a bought a Mac Mini late 2012 version a couple months ago, and after i tried to install "pro tool" on my Mac, and FAILED. my Garage band wouldn't open anymore. it only tells me "garage band quit unexpectedly" when i open it. I tried uninstalled it and reinstall it again, but it still won't work.
So now, I want to jus5 restore the whole Mac mini to factory setting and erase everything in it.
I had read some of the threads in the community, and the Mac mini late 2012 doesn't come with an OS disk.
Therefore, is there anyone can tell me how i would be able to rest the Mac Mini later 2012 version back to factory setting and erase everything in it?
Thank you very much!
PS: i am not using Apple keyboard.

See:
http://support.apple.com/kb/HT4718

Home Mac Mini Yosemite Server and Time Capsule

Hello again,
I''m looking to have a Mac Mini Yosemite home server with my dot com pointed to my fixed IP.
I have a laptop, an iPad 2 and an iPhone 6 to manage in the beginning.
It's mostly to practice skills for employment purposes.
If I get the latest october 2014 Mac Mini with Server 4 and I want to back up the server on a Time Capsule 3 TB:
Will it create big backups:
Some macs will be backed up to Mac Mini Yosemite Server Time Machine Services.
iPad and iPhone backed up in iTunes, on the server or the laptop?
What else can be a problem?
François

Hello DC,
Thanks for the quick reply.
For the problem I try to anticipate, it was like those mac with Bootcamp, where Windows is one big file and a simple log on-log out on Boot Camped Windows would change the big piece of bread and another complete multi GB would be backed up. the runaround was not to time-machine the Windows file and use a PC backup for the Windows stuff.
In the same vein, if users back up to the Mac-Mini server in a sparse image, does'nt that fill the backups of the server which is also a sparse image?
I agree with you that an external Time Machine HDD is more flexible as more than 3 TB can be needed down the road.
As for open ended question, effectively, you read it right, I am looking for problems I did not anticipate from user who bumped into them.
Thanks

Workaround for remote with Apple TV + Mac Mini media server?

We have to keep unplugging and then replugging our Apple TV 2 any time we want to use our Mac Mini media server instead of the Apple TV on our home entertainment system. Alas, the lack of a power button.
The reason we have to do this is because the remote control signals are identical for the two units; we're using Plex TV on the Mac Mini, and when we use our universal remote, if the Apple TV is on, then unintended things happen in the background on the Apple TV any time we control the Plex media server. Ack. We could end up buying a video that we don't want.
What workarounds are there, to avoid plugging and unplugging the Apple TV, if we want to keep using a remote control with both the Apple TV and with the Mac Mini media server? I understand that plugging and unplugging it is not desireable.
On the other hand, we do shut off power completely to our entire entertainment system, via the power conditioner, when we're not using it, to conserve. I suppose that's equivalent to plugging and unplugging the Apple TV?
Your thoughts?

I know its been 17 months since anyone replied to your post, but I stumbled upon your request, because I had the same issue. However, I can faithfully say that I solved this same problem, because I inadvertendly programmed my MX-980 remote to control my Apple TV and Mac Mini at the same time and didn't realize until much later what was happening. I use my Mac Mini (for the purpose of using PLEX) and my Apple TV for other purposes. Here's a discussion I had over at remotecontrol.com about it.
The solution for you is have two Apple remotes. You can buy an extra apple remote at a good price over at Amazon.
Out of box, the apple remote is designed to pair with your Mac and Apple TV as long as pairing is enabled on those machines by default. However, it's the consumer's responsibility to physically pair that remote with the machine you want to control so it can't control any other machine. That's the trick you were missing...
So, if you have an Apple TV and Mac Mini next to each other -- a single Apple Remote will control BOTH machines at the same time out of box. This is not the intended result as you have indicated. Therefore you need two apple remotes.
Mac Mini: Once you have two apple remotes, go to your Mac Mini (OSX 10.9) and select under the Apple menu > Preferences > Security > General > Click unlock (bottom left corner) first > sign in > Then click Advanced... to see the Pairing process. If you click advanced *before* you click unlock icon, the pairing menu will be missing.
Note: You can also install free CandleAir preference for your Mac which is a slick interface for configuring apple remotes faster and easier IMHO. http://www.iospirit.com/labs/candelair/
Apple TV: Now take your second Apple Remote, go to Apple TV > Preferences > General > Remote and follow the on screen instructions to properly pair your remote control.
This should solve your problem.

LDAP and NFS mounts/setup OSX Lion iMac with Mac Mini Lion Server

Hello all,
I have a local account on my iMac (Lion), and I also have a Mac Mini (Lion Server) and I want to use LDAP and NFS to mount the /Users directory, but am having trouble.
We have a comination of Linux (Ubuntu), Windows 7 and Macs on this network using LDAP and NFS, except the windows computers.
We have created users in workgroup management on the server, and we have it working on a few Macs already, but I wasnt there to see that process.
Is there a way to keep my local account separate, and still have NFS access to /Users on the server and LDAP for authentification?
Thanks,
-Matt

It would make a great server. Bonus over Apple TV for example is that you have access via both wired ethernet and wireless. Plus if you load tools from XBMC, Firecore and others you have a significant media server. Cost is right too.
Many people are doing this - google mac mini media server or other for more info.
Total downside to any windows based system - dealing with constant anti-virus, major security hassels, lack of true media integration and PITA to update, etc.
You should be aware that Lion Server is not ready for prime time - it stil has significant issues if you are migrating from SNL 10.6.8. If you buy an apple fresh Lion Server mac mini you should have no problems.
You'll probably be pleased.

Mac Mini OSX 10.6.5 config w/ cable/modem-AEBS-mac mini server

I'm new to OSX server, and have recently had to change locations of a OSX 10.6.5 Mac Mini. I am setting it up now as a home server and need to access from outside the home. I have had a wonderfully operating AEBS for many years, but once I started trying to set-up the mac mini server, I started having problems configuring the server to play nicely with the AEBS.
Back to basics, because for what I need the AEBS is sufficient (and technically capable) of acting in concert with my mini server (from all I've read, anyway). I just cannot configure them correctly without causing problems.
Equipment:
AEBS w/ version 7.4.1
Mac Mini OSX 10.6.5
iMac OSX 10.6.5
(2) MacBook Pros 10.6.5
(2) iPhones IOS 4.2
I have a static (known) IP from my ISP. I have no problem with configuring the AEBS to work with everything, until I plug in the mac mini. I realize the older configuration for the prior server set-up is incorrect, but making minor adjustments for moving to a AEBS from the Cisco UC500 set-up has been greater than my technological experience.
I am versed in networking, but cannot seem to get the correct configuration, and the only thing the Apple manuals have is a 'possibility' this can be done, but no specifics I can find for controlling the AEBS settings from the mac mini when connected on the LAN port of the AEBS (that's when the problems start).
Here's where I've tried and cannot access the Serv Admin program when I connect the mac mini to the AEBS LAN port:
(1) changed AEBS Connection sharing to Share a public ip address
(which I understand makes "advanced" "port mapping" possible)
(2) set AEBS Internet connection to connect to router on 192.168 network
(3) set AEBS to offer DHCP in 10.0.1 range
(4) set AEBS capsule own address to be 10.0.1.1
PLUG in ethernet cable to Mac Mini and Time Capsule
Activate Ethernet and deactivate Airport
(5) set Mac Mini Server Manual ip address to 10.0.1.2
(6) set Mac Mini Server DNS addresses to 127.0.0.1, 10.0.1.1
(7) set Mac Mini Server / Server Admin / DNS / Zones / Machine name / IP Address = 10.0.1.2
Any advice on where to start trouble-shooting?

The AEBS gets your public static IP address, and otherwise performs NAT.
(The AEBS is a good home box, but not a server-grade firewall. I do run AEBS and Time Capsule boxes, but these are generally operated as WiFi Access Points (what Apple calls "bridging"), and not as WiFi routers, and definitely not as server gateways.)
The AEBS DHCP server configuration for DNS services is set with the IP address of your new server; that's your DNS server now. Caution: +There are no references to ISP DNS nor other DNS servers.+ You're running DNS (well, you will be soon), so your local network will be configured differently than a client network.
Your Mac Mini Server is configured in a /24 subnet in one of the private blocks (eg: 10.0.0.0/8) somewhere. This for future VPNs, as everything on the planet is crammed in a few 192.168.0.0/16 subnets.
The AEBS DHCP server can be used to pass out a pool of addresses in that private /24, but the server must have a static IP address.
[Get your DNS services going for your LAN now.|http://labs.hoffmanlabs.com/node/1436] Don't skip this step. DNS is essential to servers, and you'll be serving DNS on your LAN. I'd suggest a real and registered domain here or a subdomain of a real and registered domain, as changing domain names on a network is an increasing pain in the rump as the network scales up.
For DNS services, your Mac Mini (and only your Mac Mini) will refer only to itself via the 127.0.01 on its network controller. (This is an odd case; the box is referring to itself, so it's the IP loopback address and not your LAN static IP address.) Everything else on your LAN will refer to the static IP address of your Mac Mini DNS server either via static configuration, or via the AEBS DHCP server's DNS setting referencing your Mac Mini server that are received from the DHCP server with a dynamic address.
Work your way up to configuring Open Directory (LDAP), and Kerberos, then configure the rest of the accouterments.

HT201260 my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

Simply purchase Mountain Lion from the App Store and it will begin installation after the download is complete. Note that it's a large download, about 4.5GB, so you should have a good Internet connection..
However... if I were you, I would just wait another month or so until Apple releases Mavericks - the 'latest' announced version of OS X -> http://www.apple.com/osx/preview/.
No need to pay for two upgrades in a months (or so) time...
Clinton

How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server. Old Mac has no more room to store files. How do I do this?

Hello,
Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
Or maybe...
http://support.apple.com/kb/ht1449
http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
http://support.apple.com/kb/PH2506
http://support.apple.com/kb/ht1229

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

10.3.9 on my G5 to 10.4.2 from my Mac Mini OSX Installer DVD

Hi everyone,
Here is my situation. I have a G5 currently running 10.3.9 which is my main computer for all my work. I purchased a Mac Mini not too long ago as a back up/special task computer that runs 10.4.2.
I just purchased Techtool Pro 4, and it requires 10.4 as a requirement.
What I would like to do is use my Mac Mini OSX 10.4.2 install disc to put 10.4.2 onto my G5. Does anyone think this would cause a problem because the disc came with and says it's for the Mac Mini? I don't know all that much about these new operating systems, so I apologize in advance if this is a really dumb question. Any insight would be greatly appreciated, as I would love to get the Tech Tool up and running on my G5. Thanks in advance for all your help.
PA Chris
G5/ Mac Mini Mac OS X (10.3.9) G5 runs OSX 10.3.9- Mac Mini runs 10.4.2

Several reasons why this is not possible.
If your Mini has an Intel processor, the OS X install package that shipped with the Mini cannot be used on a Mac with a PPC processor but regardless, the install package that ships with a new Mac purchase is model and build specific and cannot be used to install OS X on another Mac.
Even if this were possible, it would be a violation of the single use license agreement.
If you want to install Tiger on your G5, you need to purchase a Tiger retail install package which can be used to install Tiger on any Mac model that meets the minimum system requirements for Tiger.

Regarding mac os x server 10.6 installation, getting an error" Please inspect your network setting and try again"

Hi,
we need your urgent help regarding mac os x server 10.6 installation, actually we are stuck in the installation at the point of Network settings. getting an error " Please inspect your network setting and try again" pls give us a solution of it , would be very thankful.
MTS

Well, there isn't much anyone can tell you without more information.
Clearly the installer is complaining about your proposed network configuration, but without seeing it, or knowing what you expect, it's almost impossible to advise.
I'd guess that it's some combination of the IP address/subnet mask and router address that's invalid, but without seeing them that's little more than a stab in the dark.

Have Mac Mini osx 10.4.5 and need to fax on my DSL..

H\I have Mac Mini osx 10.4.5 and need to fax on my DSL..
Have DSL. Currently have inoperative Os9.2 imac plugged in to fax in the past, and my Mac Mini into dsl. What do I need to fax from the Mac Mini?
Visually impaired, I need instructions for someone else to set it up all over again, both lines out of mac Mini. Other discussions do not seem to be what I am looking for. I used something like faxstd I think. Not available for osX. What do I need? Thanks. Jack

Thanks. Now I think that I understand that my mac mini did not come equipped with a modem at all as I thought it would. So, I need to purchase something else now. I've already added several, at considerable cost. Little did I think that all these would be needed. Speakers, an iMic for recording sound. Now I wonder if I need another voice program to read text for me (not totally blind, so I don't enjoy constant comment about page names, http:// etc. I do love "Constant Comment Green Tea," however. And, in my old age, I enjoyed knowing about PhotoDeluxe, and can't use it on my Mac Mini. All these things to do differently is driving me nuts. The dsl modem was provided by my dsl line service. It seems strange that any commercially produced computer would be this incomplete. My old iMac had an internal modem. And, this new Apple does not? Strange. "Give me a little Liberty, or give me death." Jack

How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

I have a 2010 Mac Mini server running 10.8.4 (12E55). I just bought a brand new copy of Windows 8 from micrsoft. I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5. I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support). I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition. I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS.
Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book. If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer. Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up.
Now I just put the DVD that they made me in my macbook and it shows up as bootable disc. But the USB doesn't. (1 hour later) I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

mikkel-kj wrote:
These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
Mikkel
Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?

My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?
I click on the color picker and where I have seen the normal #0000ff blue color on my windows computer, this mac Mountain lion version shows a purple-ish color. Oddly, If I enter the hex # into the color picker, and use it as a fill, the correct color displays on the stage but when i use the eyedropper on that color, it shows it as the purple color again on the toolbar.
I've seen a similar thing like this happen when using adobe photoshop. However, the usual solution is to just make the managed color profile set to monitor RGB. The only downside with Flash is there is no preference to set that. The color palette in Adobe Photoshop displays as it should with the correct blue.
I should also note that I'm using a Samsung 941bw monitor with my mac mini which could also be part of the problem.
I figured i'd make this post anyway just in case it's the OS & Adobe Flash CS6 and not the monitor.
I've included a screenshot as well that shows that i've chosen the purple color and then made a rectangle shape on the stage and it comes out blue.
Thanks ahead for your response(s)
-Line

Seems misleading that on the adobe site for Adobe Flash CS6 it says:
System requirements:
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.**

Mac Mini OSX Server Version and installation

Similar Messages

Maybe you are looking for