Mac mini Server is almost perfect

I'd like to see it support more memory, but more importantly, I think it really needs an eSATA connection. I would rather have the Server version keep the DVD player and add the eSATA connection. A second 500GB drive doesn't really do a whole lot when you have tons of photos, videos, and music.

I just posted a complaint about the lack of eSATA earlier. I agree, eSATA should be included. A file server needs to have speedy access to data. The internal 5400 RPM drives are limited due to number of platters and rotational dely, FW800 is limited by the bus and can only achieve mid 60's MB/sec. I had a 4TB RAID5 array attached to my mini, but ended up moving it to a PC with eSATA due to performance. And no, we should not have to hack up the computer and hang a SATA connector out of the case to get external SATA connectivity.

Similar Messages

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

How Do I Increase The Speed Of Sending Emails Using The Mail Service on my Mac Mini Server?

Note: This is the first time I have set up a mail server.
I have a Ruby on Rails application where I am currently sending approx. 240 individual emails with the potential of more being sent each week as more people add themselves to our mailing list. I am sending them invidually in order to personalize the emails and to hopefully prevent my emails being falsely identified as spam.
The GoDaddy email address I was using in my Rails application has a daily limit of sending 250 emails each day. With our mailing list fastly approaching 250 I decided to set up an email address on my Mac Mini Server using Mountain Lion (OS X Server). The email address was set up to be stored locally at the advice of Apple Enterprise Support. This email address will not be used in an email program. It will only be used in all my Rails applications.
My emails send properly but take almost 10 seconds an email. When I use the same software with GoDaddy's email address the emails take about eight minutes to send. With the email address I created it takes about 41 minutes. The difference seems to have to do with the sacl_check being done. Here is an example of what I see for each email in mail.log.
Mar 14 11:06:50 hostname.domain1.com postfix/qmgr[45322]: 4B2C5603D25: removed
Mar 14 11:06:59 hostname.domain1.com postfix/smtpd[99464]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
There is 9-10 seconds that elapses when the sacl_check. If I subtract this difference the remaining time is almost the time that the GoDaddy email takes to send the same number of emails.
The link below is a post about the sacl_check. I was looking at the comments by powercore from Germany at the comments where settings in /etc/postfix/main.cf are discussed.
https://discussions.apple.com/thread/3241121?start=0&tstart=0
Will making these setting changes speed up the sending of the emails from my Mail Server or is there something else I can check?

http://en.wikipedia.org/wiki/Intel_Quick_Sync_Video
OS X [edit]
Apple added Quick Sync support in OS X Mountain Lion for AirPlay Mirroring and QuickTime X.[9]

Mac mini server with Apple remote

Hi,
Bought my mac mini server november last year, and much to my surprise, with it came an Apple remote. Not the latest one but the flat all-white one.
This weekend I have redeployed the mini in my house and want to start using Frontrow, however my remote does not seem to work with the mini.
I have tested the remote with a number of other maca and atvs, there it works fine.
Any pointers appreciated
Pim

That is really strange, the remote is not list as being in the box on the Mac mini Server's Specs page!
I believe it used to be, there was definitely a pre-formed space for it in the box
Have you checked the battery since it is an old model?
I mentioned i worked perfect with any of the other Macs in the house
You can use Mac Help in the Help menu of the Finder. Go to Index>A>Apple Remote for troubleshooting and pairing instructions.
Not sure if this is the issue, since the server version does not have an optical drive, I was wondering if it has an IR eye
Pim

Mac mini server - Can't access Internet

Hello. Using a Mac mini server as the media server for my house. Not really using any of the Snow Leopard Server services though. Wanted the larger hard drive and didn't need an optical drive so this was perfect for me. At any rate, recently noticed that the Mac mini can't access the Internet. It talks to the other Macs and Apple TVs in the house fine but it can't load a web page. I looked at the preferences and everything and can't see anything wrong. Plus, all my other computers get on the web fine. Any ideas? Is there a specific setting I should check? Thanks in advance.

Can you describe your LAN and how it connects to the internet, as well as how the device that acts as your router is configured to interact with the computers on your LAN and how the individual computers are configured to connect to the routing device?
Dah•veed

Mac Mini Server (Announced October 20, 2009) - Does it do RAID1?

Apple announced the Mac Mini Server today for $999. It comes with two SATA hard drives, but there is no mention of RAID1. Does it do RAID1? This would be a good enough reason to get it. This could be a perfect media device - iTunes server, streaming video to TV via DVI/USB-to-HDMI adapter or DVI/optical-digital-audio_out-to-HDMI adapter, Time Machine backups, and file storage with RAID1. Without RAID1, this is just a mini sans the DVD drive.

Dunstan Cooke wrote:
I'm interested in a RAID 1 configuration to use as a file server in our office. 500 gb will be plenty of space for us, and I will couple this with an external 1 TB drive to use as a Time Machine backup.
Given that presumably the OS will come preinstalled on one of the drives, how do you then create the mirror of this? If I reinstall the OS from an external device, does the installation provide the option to create the RAID 1 array to install to?
When you boot from the Mac OS X install DVD (included with the Mac mini) you have the option to run Disk Utility to format/erase/partition or configure Software RAID. You can then once you have created your RAID configuration proceed with the installation in to that volume.
Note: The Disk Utility program (the GUI version) does not let you partition a RAID drive, so if you have the two 500GB drives, you can only have a single 500GB volume (RAID1) or a single 1TB volume (RAID0). It is possible (but not recommended by Apple) to create two or more RAID mirrored partitions on a pair of drives via the command line. To do this in this case, would involve booting from an external drive which has Mac OS X installed on it, then you can run the Terminal to access the diskutil command line tool.

Mac Mini Server mid 2010 problems

I have a Mac Mini server mid 2010 model, running Mountain Lion server.
It reported a fault with the HDD in the lower drive bay some months ago, so I changed the disk. It still reports a fault with a new disk and the original disk works perfectly in a portable enclosure, so it cannot be a disk problem but something more serious.
I have now discovered that bank 1 ram slot has failed. I have two 2GB ram modules, and whichever way I insert them bank 1 claims to have no ram.
Are these two problems related, and what is the fix. I'm just hoping there is something simple and that I don't need to replace the logic board.

Run Apple Hardware Test to try and pin down where issue is.
However, it does sound like it is a logic board issue. These
days, since pretty much all the ICs on the board are BGA
(ball grid array), even the best electronics hobbyist can't
replace them.
I just did a quick Google of logic boards for 2010 Mini and
they are pretty pricey ($500-$600 range). If you have Applecare,
however, you should be covered.
At that price for logic boards, you may be better off looking for
someone selling a 2010 Mini and just replace yours.

Using iPad and LogMein app with Mac Mini Server

Hello everyone, I'm new to the community and I would like to ask your opinions on something I'm considering.
I'm currently using a MacBook Air beyond its capabilities. I'm running a dual system via Parallels since some of my work programs are Windows based.
I'm planning to pass the MacBook Air down to one of my employees but I'm stuck on what I will purchase to replace it.
I like the new MacBook Pro, but I don't like the $2200+ price tag. So what I'm considering is buying a Mac Mini Server ($900) and setting it up in my office with a HDTV as a monitor because I use construction design programs and the laptop screen is just too small for large drawings. The Mac Mini also has 1TB storage vs 256GB on the MacPro. I already have an external disk drive so that's no issue either.
Also, since I still need mobile convenience, I'm considering downloading the "LogMein Ignition" app ($130) and using this to log in remotely with my iPad for complete access to all of my files and programs.
What are some pros and cons I should consider before making this move?
Thanks in advance for the help!
Kevin

> If your server is behind NAT, there is almost certainly no need for packet filtering and you should disable it.
I disagree, Linc. PF is very useful to block known bad IPs and brute force attacks, which are an hourly occurrence, especially on ssh. I use this PF configuration for OS X, which blocks brute force attacks, updates IP blocks from emergingthreats.net, and more. My logs and pf table "bruteforce" are full of attacks and blocked sites (sudo pfctl -t bruteforce -Ts). I also run snort on OS X and can see that the snort alert triggers are greatly reduced by simply blocking all these packets at the network layer.

Help! Can't reinstall Lion Server on Mac Mini Server

To me, the perfect computer is a Mac Mini server (the current model) with one of the HDDs replaced with an SSD. I did this with two Mac Minis three months ago and it went perfectly.
Well. I bought a third Mac Mini and have attempted to do the following:
Carefully opened the case, removed the top parts and memory.
Removed the top 500 GB HDD
Replaced it with a OCZ Vertex 3 SATA III 2.5" SSD
Booted from a SD Card with the recovery system on it
Formatted both SSD and the other HDD, ensured they have the GUID boot block needed for Apple booting
What happened was...a total let down. It would start to download Mac OS Lion Server then tell me, "Could not find instalation information for this machine. Contact Applecare." If I went and re-formatted the SSD and tried it again, often it would go past this section, actually starting the download, but then I'd get "Can't download the additional components needed to install OS X."
I verified all connections were solid. Putting the original HDD back caused the machine to boot fine and let me set up Lion Server for use (oddly, even though I'd formatted one of the two RAID drives, but whatever). I am doing the exact same thing I did before successfully, only with an OCZ drive this time instead of Other World Computing. Either Mac Minis hate working with OCZ SSDs, or I made some mistake somehow (I'm pretty sure I didn't), or else Apple has flipped a switch forbidding software restoring of Mac Minis that have been "altered" from factory state. If so this will be a huge problem for Apple. I will make sure the major Apple blogs hear of this, if this is the case.
Can anyone suggest what else I can try to get this to install? If I can get a spare OCZ SSD so it's exactly the same as my previous successes. Otherwise I don't know what else to try.
(I guess cloning the system from one of the Mac Minis that works would be a possibility, though I want to solve this.)

Found that the second hard drive is broken. I have to go to the apple store to have it replaced.
I had to press the power button to turn the server off for several times, then the broken hard drive went disappeared. After that, I had to disable the Spotlight. Then the server went back to work normally.
Now I made a CCC copy of the primary hard drive, and would like to have the server run on the external raid disk (connected through thunderbolt). Does anyone have previous experience with it? Any expectable drawback or issue with this setup?

Mac Mini server question

I'm working on replacing the Mac Mini server in a small office configuration where the Mini is acting as a fileserver, a Filemaker Pro server and Time Machine backup server. There are 8 machines in the office using the server. The files being shared and the time machine backups are on a drobo. Currently it's a late 2009 Mac Mini server with a 2.53Ghz Core2Duo. For the purposes outlined above, is there any reason to get a 2.8Ghz or 3.0Ghz processor, or is the mid-range 2.6Ghz i5 totally sufficient? In either case I would be maxing the RAM.
I'd also be buying a new Drobo to attach to the new Mac Mini, so I was going to keep Time Machine backups on the old drobo, but move filesharing to the new Drobo. Originally I had thought I'd have both those drobos connected to the new Mac Mini, but then it occurred to me that perhaps it would be advantageous to also keep the old Mac Mini server in use with the old Drobo. Is there an advantage to keeping the old Mac Mini server running in the office and utilizing it SOLELY as for centralized Time Machine backups, leaving the new Mac Mini server to just be a fileserver and Filemaker Pro machine. Would that make any difference?

I don't see any advantage with a 2.8 or 3.0Ghz processor versus a 2.6Ghz. The 2.6 should be plenty of processing power for your needs.
In my opinion, keeping the old Mac Mini to offload some of the "duties" is perfectly fine. For example, I have a home network with 2 MMs. One runs ML and Server. It services the household Macs for file sharing and time machine back ups. The other MM runs Mavericks and Server. It services some file sharing but mostly network accounts, VPN services and time machine back ups (for both servers). Both only have 4GB of RAM and work great for my needs. It's overkill for a home network, but I have a back up server and can easily add the services from the other if one goes down. You would have that same capability keeping your old MM.

Disk Erase Failed. Disk cannot be dismounted on Mac Mini Server

Ok, this is a bit crazy for me anyway. I have a Mac Mini Server running Snow. My Server HD failed but fortunately my Mac HD was being used as an image backup and I can boot from it fine and runs perfect. The bad disk was not showing in Disk Utility at all. So I bought a new one and replaced it.
Now Disk Utility sees it but if I try to format it or partition it, I get the message the it cannot be dismounted. I tried re-setting NVRam (Optio+CMD+P+R) but n luck.
I have my original Snow DVD but I have no external DVD. I have a MacBook Pro Mountain Lion.
How do I erase my new disk so I can copy everything back?
Any help is appreciate it.

Although thats an excellent suggestion but in the end I attached an old usb backup drive and restarted and held down the Option key to select it to boot. Then it went into Disk Utility, and I reimaged the 2nd drive to the new drive. After the reimage I restarted and held down the Option key to allow me to select the first drive.
The only issue I had was to rename my boot drive back to Server HD, which I did by using Finder and one more restart.
I guess the rule is you cannot unmount the boot original boot drive unless you boot from an external drive.
All is good now and thank you.

Mac Mini Server (Latest Model) and Bootcamp?

Hi, I am interested in purchasing a Mac Mini Server - The latest model. But have a few questions
1.) Before I purchase soon, is there an updated line coming out that I should wait for - Or no rumors as of yet?
2.) I read a while back that Mac Mini server, could not bootcamp. But recently came across a post stating that the newer systems w/ Mountain lion contained the necesscary files to bootcamp Windows 7 (off google, lost original link)
I need bootcamp for Audio production as some programs I have are windows only.

Yes, thank you for your reply. I did purchase the adapter, which works perfectly.
But now of course I have other issues regarding the use of 2 monitors. I now have both my Macs hooked up to the KVM using the 30" but I am unable to view the other monitor which is not a High definition display(1280 x 1024). It seems the only other port available on the Mini is the HDMI port which I have the HDMI to DVI adapter for. Is it possible to connect this VGA display with a DVI to VGA adapter (which I have)? Or am I looking at yet another purchase of a compatible display? This VGA display is primarily used for communications with coworkers..etc so that my 30" is only for my work. Thanks so much for your help.

Apogee duet - no sound - mac mini server OSX 10.9

Hi
all posts relating to my query are very old so I pray someone can help with an updated solution.
I purachsed an Apogee DUET FIREWIRE to work with ABLETON LIVE 9 on my MAC MINI 2011 i7 16gb runing OSX 10.9.5 (ok - so i can see alreday that I am not on YOSEMITE - but the APOGEE driver application states its for 10.9 and 10.10). It second hand
Dowloaded the nec software from Apogee site, plugged in, Duet recognisedstraight away....then NOTHING !
No output. changed system settings accordingly. NOTHING. when I click on the drop down in ABLETON it HANGS for ages. Then after its selected, the track doesnt play....
So It tried ITUNES. Same. after clicking play NOTHING happens - track status bar does not move. When I re-select the mac output (through my stereo / headphone socket) I can hear itunes / Ableton perfectly.
I am sensing this is a driver issue.? I wont lie to you - Im a NEWBIE to MACs. Converted this Xmas - but I seem to have picked up a well stocked MINI MAC - but is a there a school boy error here I am missing?
BTW - just to be safe Ive ordered a new 400-88 firewire cable just in case...as apogee came with a 800, 9 pin to 9pin cable, so I am using an adaptor (which again may be the probem - even though its high quality),...new cable will arrive tomorrow.
MANY THANKS - NICE TO FINALLY GET A MAC !!
Jof

I think you're trying too hard...
I have zero tech or network expertise, but my Mac mini server intalled without a hitch on my home network of three other Mac desktops (Ethernet from AEBS), a MacBook, and a PC laptop, both via the AEBS wireless. The AEBS is connected to a cable modem.
I also have a static IP for my AEBS.
If you hook up your server, computers, and AEBS first and then reinstall Mac OSX Server, the server set-up will configure your network for you. You shouldn't have to set your own IPs at all...
I'm no genius at this stuff and I'm mostly playing around and experimenting, but we use file sharing, a common calendar, a family Wiki, centralized backup, and also run iTunes continuously to serve an Apple TV.
Let Apple do the work for you. See if the defaults work before tweaking it. It worked out of the box for me... Good luck.
Charlie

New Mac Mini Server Network Issue

I recently purchased the new Mac Mini Server with 10.6 to use as a Content Filter/Web Server for a small private school. While trying to set it up, using the on board ethernet and a USB to Ethernet adapter, I have lost all ability to acquire an IP. IT does not matter if I use the on board ethernet, the USB adapter, or the Airport. All three return a self-assigned IP. I know this is related to the machine since I can still access the cable modem setup by typing in 192.168.100.1. And I brought it home to work on it a little more and the bonjour services are detecting the other macs on the network.
I tried trashing my network preference plist, but no change.
I am considering doing a fresh install since I think the initial setup was borked. But I thought I'd hit up the board and see if anyone else had a thought before I begin that process.
thoughts?

I have setup this configuration several times with both a MacPro and the smaller mini setup. The gateway setup we are describing is about as simple as it gets (static IP, gateway running all services so 1 IP address, gateway set as 192.168.1.1 on the local net. Simple DHCP and DNS "server.local", and "server.xxx.com" external).
I would be overjoyed to find that I can configure this by setting up some simple overrides in the routing. I would point out in defense that _everything else_ works perfectly basically by default.
1) dns on server: local and external, forward and reverse from itself and the local network - check
2) services on server (all of them): from itself and the local and external networks - check
3) network access (ie NAT & Firewall) for local machines - check (web, streaming, even bittorrent)
The only issue I see is that remote clients cannot access the gateway itself properly though VPN. UPD return packets seem to be mis-routed through the physical interface rather than the virtual one.
ALL other operations (Mail, iCal, iChat, Push, Web Services, Wiki, Web Mail and iCal, NAT) work perfectly for the server, local network, and external hosts. The above problem only happens for vpn clients, and then only for connections from them to the gateway itself, and only for UDP packets.
I would really love to know how to fix it, especially if this can be explained by a needed custom rule (But I'm guessing not given the otherwise full functioning system). Are you saying that to make VPN work you need to add custom routing info that is not described in the Server docs? If so what?
Thanks,
Hunter

Website on Mac Mini Server not accessible. Error 403 index document not available.

Dear all,
I'm trying to host a website on my Mac Mini Server. As far as I can see, my DNS is working correctly. Also my firewall is setup correctly. (I'm hosting another website which works OK). But I setup a new site. Basically a copy of the working site. But this site doesn't reflect an index.htm page. I receive an Error 403 with further information that there is no index document or that the site is secured. There is a contact link on this page directing to my webmaster. So I conclude that something is working, but no index.htm page. Has anyone similar experience? And offcourse a solution?
Many thanks.

Launch Terminal.app and issue the commands:
cd /Library/Webserver/Documents/
ls -al
And see if the files are readable by the web server. Here's an example index file listing that's owned by root and with group access for admin folks, and this file is marked as readable and writable for the owner and the group, and is readable for everybody else:
-rw-rw-r-- 1 root admin 5094 Jul 25 2009 index.html
In this configuration, the web server would be using the other access; the web server can read this file, but not write to it. Here is how to duplicate these ownership and access settings on your own index.html file, assuming that you have that file present in the ls listing above, and assuming that you have issued the cd (change default directory) command shown above:
sudo chown root:admin index.html
sudo chmod ug=rw,o=r index.html
You will need to enter your administrative password for the sudo command.
I would very strongly suggest that you start learning some basics of bash and of Apache, because you're going to be needing those skills very soon.

Mac mini Server is almost perfect

Similar Messages

Maybe you are looking for