Mac Mini Server (Latest Model) and Bootcamp?

Hi, I am interested in purchasing a Mac Mini Server - The latest model. But have a few questions
1.) Before I purchase soon, is there an updated line coming out that I should wait for - Or no rumors as of yet?
2.) I read a while back that Mac Mini server, could not bootcamp. But recently came across a post stating that the newer systems w/ Mountain lion contained the necesscary files to bootcamp Windows 7 (off google, lost original link)
I need bootcamp for Audio production as some programs I have are windows only.

Yes, thank you for your reply. I did purchase the adapter, which works perfectly.
But now of course I have other issues regarding the use of 2 monitors. I now have both my Macs hooked up to the KVM using the 30" but I am unable to view the other monitor which is not a High definition display(1280 x 1024). It seems the only other port available on the Mini is the HDMI port which I have the HDMI to DVI adapter for. Is it possible to connect this VGA display with a DVI to VGA adapter (which I have)? Or am I looking at yet another purchase of a compatible display? This VGA display is primarily used for communications with coworkers..etc so that my 30" is only for my work. Thanks so much for your help.

Similar Messages

Windows 7 No 5GHZ WiFi on Mac Mini A1347 2010 Model using BootCamp

I have a new 2010 model mac mini and the WiFi in snow leopard works fine with both a 2.4GHZ and a 5GHz connection. When I reboot into Windows 7 I am only able to use a 2.4GHz connection and the 5GHz connection does not even show up as an option to connect to.
Any ideas?
- Dan

Welcome to the Apple Discussions!
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Mac mini has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

Mac Mini Server will not go into recovery?

I've just bought a Mac Mini Server 2012 model, and when I try and boot to recovery or safe mode, the boot hangs, then the machine restarts with the 'Your computer restarted because of a problem' message. The machine boots to normal mode fine, and can also boot to startup manager, which shows a recovery partition. I've tried resetting the NVRAM, as well as booting straight from Apple's servers. Both have not helped. The previous owner said he reinstalled OSX from recovery before he gave it to me, which leads me to believe it could be something other than a faulty drive. In addition, Disk Utility has not thrown up anything. If anyone could shed some light on this at all it would be very much appreciated as I'm starting to get a little bit annoyed!
Thanks.

The first thing you should do after acquiring a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

What is "best practice" to set up and configure a Mac Mini server with dual 1 TB drives, using RAID 1?

I have been handed a new, out of the box, Mac Mini server. Has two 1 TB drives in it. Contractor suggested RAID 1 for the set up. I have done some research
and found out that in creating the software RAID, this takes away the recovery partition, so I have been reading up on how to create a recovery "disk" using a thumb drive. this part of the operation I am comfortable with, but there are other issues/concerns that I have.
Basically, what is the "best practice" to setup the Mini, configure the RAID and then start the server. I am assuming the steps would be something like this:
1) start up the Mini and run through the normal Maverick setup/config - keep it plain and vanilla
2) grab a copy of the Server app and store it offline in a safe place
3) perform the RAID configuration / reinstall of OS X Maverick using the recovery tools
4) copy down and start the server app
This might be considered a very simplified version of this article (http://support.apple.com/kb/HT4886 - Mac mini server (Late 2012 and Mid 2011): How to install OS X Server on a software RAID volume), with the biggest difference being I grab a copy of the Server App off of the mini before I reinstall, since I did not purchase it from the App store, but rather it came with the mini.
Is there a best practice / how-to tutorial somewhere that I can follow/learn from? Am I on the right track or headed for a train wreck?
thanks in advance

I think this article will answer your question. Hope this helps: http://wisebyte.blogspot.com/2014/01/best-configuration-for-mac-mini-server.html

HT4938 New mac-mini server setup without keyboard and mouse

Im trying to use the server app to setup my new mac mini server without mouse and keyboard, but the server is not listed. I have tried using its IP address with no username and the serial number as password but it won't connect. Any ideas?

You may have a version mismatch. If I recall, setup assistant is OS version dependent so if the refurb is 10.5 and the Mac Pro is 10.6 you will likely not be able to use setup assistant.
However, just use ARD or Screen Sharing to connect. If the mini is visible on the network and in the ready for setup mode, you can ssh into the machine using the root user and the first 8 digits of the machine serial number. Then you can use the kickstart command to startup the ARD agent on the system. Use these commands while in the SSH session.
cd /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources
sudo ./kickstart -activate
sudo ./kickstart -configure -access -on -privs -all -users <shortname>
For now, the user will need to be root because there is no user. Then screen share the system to complete the remainder of the initial setup.
In theory this will work. Works on Xserves, so I believe the minis work the same for initial setup.
Hope this helps

Getting AHT to work on Mac mini server

I have a intel core 2 duo Mac mini server (macmini4,1), and I'm having sporadic freezing/locking issues. I am trying to run the apple hardware test but it doesn't work, holding down the 'd' key does nothing. If I try single-user mode startup it works fine so there doesn't seem to be an issue with the keyboard. Since this is the server I also don't have an optical drive to go to to boot from the install disc. Why doesn't this work? Is there an alternative way to get this to run that doesn't involve the install disc?

Actually, this problem is only partially solved. I still get "Can't connect to local MySQL server through socket '/var/mysql/mysql.sock..." when I type 'mysql'. I can access mysql by typing 'sudo mysql', but still get the socket error when connecting via php, so I think I still need to get to the point where I can type mysql without sudo.
Also, I went ahead and installed MySQL 5 with the tar package.
Message was edited by: rabbitdog

Mac mini server freezed

our mac mini server was freezed and try to restart, but the apple logo and the spinning gear keep running.
I try un-plugged it but same thing the spinning gear logo keep running.

See if you can restart into the Recovery HD by pressing/holding Command+R at the boot chime. Then, open Disk Utility and do a Verify Disk. If there are errors, then do a Repair Disk.

Mac mini server error start postgres "CANNOT_START_SERVICE_TIMEOUT_ERR"

Hello,
I bought mac mini server this week and I started to configure.
I can't start postgres with command "serveradmin start postgres", I have this error:
"CANNOT_START_SERVICE_TIMEOUT_ERR"
In this discussion Wiki: "error reading settings", Postgres "CANNOT_START_SERVICE_TIMEOUT_ERR", I do it but not success. When I open the "file/var/log/system.log" I have this lines about the execute command to start postgres:
Oct 13 20:31:42 Mac-mini-de-admin.local sudo[2376]: admin : TTY=ttys001 ; PWD=/Library/Server/PostgreSQL ; USER=root ; COMMAND=/Applications/Server.app/Contents/ServerRoot/usr/sbin/serveradmin start postgres
Oct 13 20:31:42 Mac-mini-de-admin.local com.apple.serverd[72]: ERROR: SMJobSubmit: The operation couldn’t be completed. (kSMErrorDomainLaunchd error 9 - The job dictionary specifies that it is disabled.)
Oct 13 20:31:42 Mac-mini-de-admin.local serveradmin[2377]: servermgr_postgres: waiting for postgres to respond
Oct 13 20:31:46 --- last message repeated 7 times ---
Oct 13 20:31:46 Mac-mini-de-admin.local serveradmin[2377]: servermgr_postgres: Timed out trying to start postgres.
Oct 13 20:31:46 Mac-mini-de-admin.local serveradmin[2377]: posting dist not
I don't find where is the problem. Have any idea where is the problem?
Thank,
Att.

See the section headed "Additional Information" in this support article.
By default, the server doesn't listen on the network. To change that behavior, edit the file
/Library/Server/PostgreSQL/Config/org.postgresql.postgres.plist
To the line that begins
<string>listen_addresses=
add a comma-separated list of addresses on which you want it to listen. Then restart the server:
sudo serveradmin stop postgres
sudo serveradmin start postgres

Bluetooth lags on new Mac Mini w/ Wireless keyboard and Magic Trackpad

Hi everyone,
I just bought a new mac mini (the basic model) and attached it via HDMI to a HD TV. I bought the mac wireless keyboard and magic trackpad to go with it. Everything works except that both the keyboard and mouse are consistently slow. Not quite to the point of un-useable, but very noticeable.
I've read that it might be radio interference with the bluetooth signal. To test this, I put my Macbook Pro right next to the new mac mini (while it and the screen were on) and paired the keyboard and mouse to the macbook pro. Everything was super fast, no lag - so that leads me to think the problem is with the Mac Mini. I've tried playing with all the bluetooth options, to no avail.
Anyone have any suggestions? I've also tried attaching a bluetooth magic mouse and had the same slowdown. Nothing seems to affect the lag, it's very consistent and probably around half a second between keystroke or mouse movement and it's reflection on the screen.
Thanks,
-Mike

Hey All,
I've got the same issue with my Mac Book Pro and a new Samsung LED 3D TV. Its connected through a DVI out from the mac to a gold HDMI adaptor, then to HDMI into the TV. I've used this set-up with my last HDTV which was a Sharp LCD, and there was no lag and no issues.
I noticed that for me, the lag appeared on the TV, but not on the laptop, so I thought it might be the connection (If I went right to HDMI instead of an adaptor maybe it'd be better) but I don't think it is given that the last TV worked fine.
I then went to my display settings in the control panel on my mac and changed the refresh rate from 24 Hertz to 60 Hertz (NTSC) on the TV and the issue has pretty much completely dissappeared. Not sure why that was the default, but I imagine certain video and other media will play even smoother as well!
Woo hoo!
Hope you all figure this out too!
TS

Adobe flash media encoder compatibility with the lion mac mini server

Can anyone tell me if the adobe flash media encoder is compatible with the lion mac mini server?

I am running adobe live flash encoder on a new mac-mini server with Lion and am able to stream video just fine - however I get a hum in the audio. I am not sure whether the hum is caused by the audio input, the camcorder, the adobe encoder, or the combination, but it seems to be the camcorder's fault.
There is a manual about migrating or upgrading to lion server, but none about instituting a new capability from scratch

Can I install SSD and HDD on mac mini server?

hi. I want to buy a new mac mini server with two hdd. can I replace one hdd on my ssd and leave second hdd for files? And can I install OSX on my ssd and windows on my second hdd (divide it into 2 parts... for bootcamp and file storage)? thanks

AGStudio.pro
as I know, it is impossibe to install ssd and hdd in this model
Thats incorrect, who told you that?    Ive installed a second 7mm drive in several Mac Minis and own 2 myself. Typing on same now.
(you can put in a second 9.5mm drive rather than a 7mm drive, however it takes nimble fingers unless you want to completely remove the dual drive caddy from inside the mac Mini)
see youtube video on installing second drive in the Mini
http://www.youtube.com/watch?v=mnrhin2ed8E
AGStudio.pro
   I don't need a server.
Then you dont need the mac mini server.    All you need is a standard mac mini.
The mac mini server is EXACTLY THE SAME as the standard Mac mini quad core mini,....except with a second drive and Server software.
All current Mac Mini have a dual slot for a SECOND DRIVE

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance.

Windows 7 on mac mini server and raid 1

I just purchased a 2011 mac mini server with the hopes of installing windows 7 alongside lion. Then my goal was to have the two drives mirrored. I successfully mirrored the two drives using disk utility and then proceeded to install lion. This all went fine. Imagine my shock when I loaded up bootcamp to see an error message describing it's inability to install windows on a raided system. The thought hadn't even occured to me that this would be an issue.
I have searched through various forums and other places on the internet and haven't found a solution. I am curious if I can get anyone with any experience in this area. Is it possible to have mac and windows installed on a drive... and have that drive mirrored to the second drive... regardless of what os i'm booted into?
Thanks for your help guys

The GUI version of Disk Utility is very limited in what sort of RAID configurations you can create. It will only allow you to have a single partition on the disk and to make a RAID using that.
Boot Camp requires creating additional partitions on the disk and hence it complaining.
There is a commandline version of Disk Utility called diskutility (duh!). It has far more options available. Details for this command can be obtained by typing man diskutility in Terminal.app.
It appears that in theory you might be able to do the following.
Start off with both disks not setup for RAID
Use Boot Camp to create the Windows partition. Repeat this on each disk.
Then in Terminal.app manually convert the boot Mac partition to a RAID using diskutil appleraid enable
Then add the matching partition on the second drive to make it a working mirror using diskutil appleraid add
Then in Terminal.app manually create a RAID for the Windows partition using both drives and use FAT32 as the format using diskutil appleraid create
Then boot and run the Windows installer and tell it to erase the Windows partition as NTFS
I cannot gurantee the above will work and you should obviously have backups if needed. Another option would be to have the Mac partition covered by RAID but not the Windows partition, this would result in three volumes one Mac RAIDed volume, and two other non RAIDed volumes even though you have two physical disks.

Small fast network with Mac mini server and Promise Pegasus?

I have 7 Mac Pros and iMacs that need to be connected to the same storage. I'm doing non MPI-based numerical modeling so the transfer rates have to be fast but not infiniband fast. I'm considering a setup with a Promise Pegasus thunderbolt RAID connected to a Mac Mini running Lion server for Access controll/Roaming homer directories. The Mac Pros and iMacs would the be connected via 1Gb ethernet.
My question is where the bottlenecks in this setup would be. The server software/hardware? The network? What else am I forgetting

I assume you're looking at Mac mini because you've already run the numbers on Mac Pro and ruled it out. I wonder how many buyers are opting for Mac mini solely for those Promise Thunderbolt arrays.
I also assume that each of your users is currently using a single gigabit Ethernet port to connect to the LAN.
If these assumptions are accurate, then I think that a Mac mini will work as long as you and your users have appropriate expectations. The win from putting this server in place won't be networked storage that outperforms an internal SATA drive, although in bursts it probably can. The solution you've described is smart because it's centralized, securable and adds a layer of data protection (RAID).
You asked about bottlenecks. I can think of three, two of which you can work around now or in the near future. The first is Mac mini's slow internal hard drive(s). You'll have a solution in hand: Boot Mac mini from the array. Some consider that to be a controversial choice, but you shouldn't spend extra for the Mac mini server with dual 7200 RPM drives. The less costly Core i7 configure-to-order upgrade will give you a bigger boost.
Booting from the array also protects you from the most likely "repair" scenario for Mac mini: Swapping out your entire machine.
The second issue is Mac mini's lack of an expansion bus. If you get more users or start using apps that demand more from the LAN, you might want to fire up additional gigabit Ethernet ports. Mac mini has just one. At present, the only way to add a gigabit port is with a Thunderbolt PCIe bus expander. Early next year, there should be more options that connect directly or via an intermediate bus like ExpressCard/34 or USB 3.0.
The one limitation you're powerless to work around is RAM. Mac mini tops out at 8 GB. That meets requirements, but it will be tight if you try to use Mac mini as a client and a server. I deploy them headless so no one's tempted to use the console.
You can improve your odds that gigabit will cut it by using heavy, short Cat6 cables and a switch dedicated to the Mac LAN. Use Mac mini's built-in Wi-Fi to keep Remote Desktop and other low-priority traffic off the wire.
Whatever solution you choose, I wish you the best of luck.

Mac Mini Server (Latest Model) and Bootcamp?

Similar Messages

Maybe you are looking for