Mac newbie printing problems

Hi,
As the subject line says, I'm a Mac newbie. I've been on a PC for about 10 years and just got my mac last Friday (how time flies!), so I'm obviously completely unfamiliar with Macs and how to mess with them.
In any case, I've kept my PC for a couple of programs that I'd like to use and need my printer for one of them. I have my printer connected to my iMac and I've networked the two computers to transfer files back and forth. So my question is this: How do I set up my computers so that I can print through my iMac from my PC? I don't want to have to rearrange the entire office just to use the printer.
Any help would be great.
Thank you!

Things to check -
1. Set your Mac to be in the same Workgroup as the PC. The PC's workgroup can be found by right clicking on My Computer, select tab Computer name.
On Tiger, you set the workgroup in the Utility Directory Access - I hope Kappy can tell you where to do that on Leopard.
2. Driver - once you can find the printer in the same workgroup, when you add the printer on the PC you will need to select a postscript driver - if the printer you're trying to use is postscript, fine, its driver will work. But if the printer is a typical inkjet, you need to select some other color postscript driver on the PC, because printer queues on Macs expect to receive postscript. The Apple Color LaserWriter xx driver included on my Windows XP works well.
Hope this helps.

Similar Messages

Printing problems with my newest Mac: can't connect to networked LaserJet

I have several Macs printing to an HP LaserJet 4000TN on my LAN. All but one work fine. Even the Windows machine works. The bad actor is a new MacBook Pro.
When I try to set the printer up (using the HP JetDirect IP connection), for some reason it can't figure out which driver to use—I have to manually select it. And very often it refuses to print, saying that it can't connect to the printer. Power cycling the printer fixes it temporarily (printer is set in Energy Saver mode but wakes up fine for other machines).
All my other Macs (all using latest Snow Leopard) work fine. What's the problem?

Error Message: "Unable to Connect to Printer, will try again in 30 seconds...
I have the same problem. It just started a few days ago. Prior to that, it was printing fine. I recently did an Apple Software update, so I'm guessing that's where the problem originated from.
I have a Brother Multifunction that's setup on my WLAN.
I got the message after attempting to:
Factory reset the printer and setting up WLAN again
Uninstalling all Brother Printer and Scanner Drivers and Reinstalling
Switching to WiredLAN to print
Same Error Message Each Time
Two days ago, I also installed a new print cartridge. When I saw the levels a day later, it looked like it was half used - No Way!
There is obviously a miscommunication between ink/toner level and new cartridges and the Apple Drivers for WLAN.
To my knowledge, there is no fix at this time and Apple needs to resolve this high priority.
What I don't get is why won't the wired config for the printer work either?
Last fix attempt: Take out all cartridges and reinstall. No Juice!
My Findings: The Latest Apple Software Update will screw up the communication between your Mac and print drivers.
Solution: It's all On Apple to fix this ASAP!

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing problem in apple mac os

Dear All,
we are having problem in apple mas OS printing problem.
not able to print out
Regs
Jitendra Singh
8800766770

Hello Jitendra,
Maybe you can provide more information:
1) What Mac OS version?
2) What access method are you using to print
3) What JavaGUI version is being used?
4) Any popup error mesages? - if yes, please upload screenshots.
5) If this only occurred recently,what changes took place to the system/environment
Jude

Printing problems with InDesign CS3 with Mac OS 10.6.3

I am not new to InDesign... I have CS3... but I am brand new to Mac Snow Leopard (OS 10.6.3). Although I can open CS3 and use the application, I cannot print with it. None of my other applications has printing issues... just CS3. Any suggestions?
Richard

Hi again Peter
It is version 5.0.4. I updated it when I newly installed it a week ago in my new computer, and then again updated it just yesterday.
I might mention that before I got my new computer, I was running Mac OS 4.11, and was using InDesign 3.0. I had bought InDesign CS3 about a year ago, but hadn't gotten around to using it since version 3.0 had been working fine, and I was used to it. Then, when I got my new computer, I decided it was time to use the newer version. However, while using InDesign 3.0 with the old Mac OS 4.11, a printing problem popped up there, too, a few months ago... and it also involved printing problems with Adobe Reader. I contacted Adobe, and they sent me a patch which fixed it. I will contact Adobe again if need be, although I thought I'd start here first to see if it was a common enough problem that someone might be able to provide a free and routine answer.
Richard
Date: Tue, 15 Jun 2010 20:10:13 -0600
From: [email protected]
To: [email protected]
Subject: Printing problems with InDesign CS3 with Mac OS 10.6.3
I neglected to ask what version of indesign CS3 you are using. I also
notice that Mac OSX 10.6.4 has just been released. It actually
addresses some CS3-specific issues, though they seem to be related to
launching the apps, not printing. It may be worth trying to update,
nonetheless.
Peter Truskier
Premedia Systems, Inc.
510-655-4454
>

Ever since Firefox did an update I have printing problems. Prints partial pages and spreads out over several sheets. I use Mac OS X 10.4.11

Ever since Firefox did an update I have printing problems. Prints partial pages and spreads out over several sheets. I use Mac OS X 10.4.11

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Bill ...
Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

Mac printing problems

I printed from my mac just fine and then I went to print a spreadsheet and the printer looks and sounds like its printing but there is nothing there. I tried different things and have established that my printers are fine. The problem seems to be on the mac.
can anyone advise please
thx

mollymoo2010 wrote:
I have just triedprinting an email. All I get on the printed sheet is
From:
Subject:
Date:
To:
Cc:
Nothing else. As both printers are doing identical prints I guess it is something the Mac is telling them to do
Or not.
Assuming your ink cartridges are in the correct order/positions, and you haven't select white as a font colour, this is a bit of a mystery.
But as it prints something, it is a printer driver/printer problem, or the cables they are connected by.

Mac 10.6.5 HP LaserJet 1022 printing problem persists

Hi All,
I still couldn't get my HP 1022 prints after updating to 10.6.5 where the release said it fixes some HP printer problem connected to Airport Extreme. (http://support.apple.com/kb/HT4250) Mine is connected to Airport extreme too. Installed the 2.5.2 HP printer update too!!
When I print document with multiple pages, the alert LED started blinking after printer the first few pages... Sigh... I did those reset printing system procedures and restarted my Airport extreme... no dice...
Wanna ask if other HP LJ 1022 printer owner has got their problem solved or not.
Thanks
Bill

Hello,
*BUGS IN UPDATE OS-X 10.6.5*
Updating new or older Intel Mac's to snow leopard to 10.6.5 will result in problems
with several HP printers (both wired and wireless with airport express basestion).
It doesn't mather if you also update the HP-printersoftware to version 2.5.2.
The problem exists...
After printing only one page, all the lights on the printer itself are flashing
(see also youtube video from German Apple users: http://www.youtube.com/watch?v=0s7gZYA2Kj4)
No more than one page is printing.
And the printer won't print anymore, untill you turn it off and back on (hard reset).
SOLUTION
Connect the HP printer (for instance the HP 1022) wired to your Apple Intel computer.
Choose the Gutenprint driver (in stead of the HP driver 1.3.0.261) when adding a (standard)
printer in System preferences.
The printer will now work fine.
Unfortunately the Gutenprint driver won't work in combination with with wireless printing
to a HP printer with a airport express basesation.
*EPSON printing problems*
Other printer problems are reported with professional Epson large format printers.
Several Epson drivers won't work in OS-X 10.6.4 and in 10.6.5
Not directly and not tru a RIP printing server (Windows or Mac).
The temporary solution is choosing a general post script printer driver,
in stead of the Epson driver, when adding a printer in system preferences.
Good luck!
Best regards,
Danny Rorije Consultants
The Netherlands

Mac newbie returns to Windows

I was really looking forward to kicking Windows into touch. No more virus software, no disk defragging required. Simple Tiger operating system. Fast performance. Throw in a Mac Pro and I should have been full of joy.
The reality has been pure frustration. I found I had to dual boot to windows to make so many little jobs I do as routine work on the Mac Pro. Boy is Tiger lacking in so many areas. Mac Mail or Entourage are just so dated and frustrating to use. Office 2004 for Mac - well come on guys, does it really have to be that creaky? Compared to the Windows version, and the latest Office 2007, it is really so limited. Can't compress pictures in a document, for example so have to send larger folders with pictures in as a PDF.
The performance of Adobe Photoshop CS2 for Mac should have been stellar. Nope. Thrashed by CS2 running on my 4-year old IBM Thinkpad laptop; the programme did storm through work in its Windows version on the Mac, but you do not by a Mac to run Windows full time do you?
Much as I want to join your club it will need a few changes. Like simple, affordable personal finiance software that allows easy migration for MS Money. Or an email programme that allows you to list contacts by first or last names. Or a system that allows you to turn off certain toolbars and keep them turned off. Software that allows simple routeplanning to be made. The ability to run RAW picture conversions without locking up. Safari allowing personal data to be stored, so allowing access to multiple on-line bank finance mangement systems from one site. Support for keyboards that help those with RSI. Ditto with track balls. Or even a few more printer drivers; failure to work 2 out of three of my printers, the oldest of which is 2 years, is not encouraging.
I could go on. In fact I did - I spent over 50 hours just trying to make a working system of of a Mac and OS.X Tiger operating system. It just could not be done. I even tried doing it the Mac way for five solid days. It was like going back to an abacus.
All in all I am just so dissappointed. My 2 weeks with an Apple Mac has shown me the grass is not greener on the other side. Windows XP may stink - Vista is too dreadful to even consider - but the Tiger was so tame I won't be coming back.
Mac Pro Mac OS X (10.4.10)
Mac Pro Mac OS X (10.4.10)

As another Mac newbie I thought I'd share some of my frustrations with OSX, but also why I won’t be returning to windows anytime soon. I've built PC's for almost 7 years, so I know exactly how much flexibility you have in both building and operating a windows PC. I also know the exact definition of compatibility. Thousands of different manufacturers making parts for PCs is a nightmare, if you don’t believe me build a computer, I dare you. Over my years building computers I have pulled out more hair, lost more files, and nearly broke so many parts I prefer to not talk about it. So finally when it was time to upgrade I thought about a Mac. Problem was I wanted a computer that had some flexibility in terms of upgrading. I was absolutely blown away by the cost of powermacs. I could build a new PC, no exaggeration, for well less than half of what a powermac would cost me. Not to mention a powermac g5 was already a generation old. So I caved and bought a dell for dirt cheap, cheaper than even what I could build a PC for. Not only that I thought maybe vista is a savior so I got my new dell with windows vista. Lets just say my brand new computer (I bought the dell in February) ran drastically slower than the nearly 6 year old computer it was replacing. Not to mention I had to go buy a new wireless card, and most of my software didn’t work. Vista looks pretty, actually it looks just like OSX, but it runs terrible unless you have a top-of-the-line computer. Anyway to make a long story short someone on craig’s list was getting rid of their powermac and they needed a new windows PC so we traded. I also recently bought a powerbook g3 so I’m 100 percent Mac now. I’ve been using OSX for a few weeks now and I’ve read some articles on making the switch. I’ve found how incredibly easy OSX is to use and how intuitive many of the features are. There are a few downsides to using a Mac I certainly understand. One is the lack of software support. I regularly use Reference Manager and SPSS, two programs that are unfortunately not supported in OSX. However I normally use these programs at work, so for now I can go without them at home. I suppose there are two other complaints I have about Apple and Macs. I’ve found that first, Macs don’t like non-Apple parts. Buy a third-party anything and you’re in for a headache. Second, what was common knowledge on a PC means nothing on a Mac. Installing an airport card took me more than a day because I didn’t know what I was doing and my mind was still thinking windows. I’ve been frustrated more than a few times with my new Mac, but the problems have been entirely because of my naïve understanding of Macs and OSX. All in All though I completely understand that Macs aren’t for everyone, especially people who use a lot of professional software. For me though the choice is easy, I want a computer that is easy to use, does basic tasks, and for the love of all things holy doesn’t crash and lose my data. Everything after that I will learn to cope with. For these reasons I am sticking it out and learning the full feature set of OSX.

Mac/Windows Printer Sharing

I have an HP officejet d135 attached to my windows XP home computer.
Both my Mac Mini and Windows is going through a router. Both machines can see each other on the network and I can share files.
The problem is that I cant seem to get Mac to print properly. It sees the printer when I try to do it through samba and when I hit print the printer fires up but all I get is junk out of it.
I have tried the help pages and cant seem to work it out.
I am a noob swithcher so my knowledge base on Mac is limited.
Can anyone offer any suggestions as to how to cure this.
TIA
Charlie
Mactel Mini Mac OS X (10.4.6)

Hi,
I am facing a similar problem... my father uses WinXP at home, with a HP Deskjet 3920 attached to it. I convinced my mother to buy a G4 iBook, and now she's all happy about it. I just set up a wireless internet connection at their home, and I am trying to use dad's printer from mom's iBook. The printer is being shared just fine, and I guess my problem is driver related as well.
Printer type is set as PS as default, and I believe this printer isn't PS-capable: print job gets into XP's queue, but printer refuses to print it. However, if I try to set its type to the right printer model, my printer simply doesn't appear on the options of HP printers. I then went to HP's drivers site and apparently they do have a driver for this model: http://h10025.www1.hp.com/ewfrf/wc/softwareList?lc=en&cc=us&dlc=en&product=44544 2&lang=en&os=219
I downloaded and installed both the HP Inkjet Driver and the web installers for Deskjet printers; installations seemed to go by just fine, but still the Deskjet 3920 doesn't appear on the list of available HP printers. Any ideas? I am probably missing something, but I can't figure out what it is...
On a related issue: since they did me no good, how do I uninstall these drivers? (I am a seasoned Linux user, but I am still finding my way around on Macs; so, please bear with my newbie questions =))
TIA
Andre
G4 iBook Mac OS X (10.4.6)

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

How to set up my MAC to print on XP wireless Router

Is there a site out here where I can get detailed instructions (in proper sequence) to get my wife's brand new laptop to print on shared network We have an XP laptop and desktop. Desktop is hooked up to a hp2175 printer. I had no problems using the wireless router to access the internet, but now I'm really at a lost of how to get the mac to print like my XP laptop.
Any help and detailed guidance is appreciated.

1. Set it up with the iCloud options in System Preferences. I am not sure you will get a mac.com address unless you alrady have one, probably a .icloud.com
2. I have used it for 6 years and I am happy with it.
3. Don't know.

Mac newbie printing problems

Similar Messages

Maybe you are looking for