Mac Pro 2006 - Adding Wireless card

Hi everyone
I have a 2006 Mac Pro running Mac OSX 10.6 Snow Leopard. Back when I ordered the system, I chose Bluetooth but not WiFi
Now I'm trying to add wireless to my Mac Pro, what are my options? Where can I find a wireless for my Mac Pro?
Thank you

I would give them a call, explain what you want. If they can help you they will need to order the components and then set up an appointment for the installation.

Similar Messages

  • How can I connect older Mac Pro (2006) to my network wirelessly?

    I just got a new (2012) MacPro that I can connect wirelessly to my network. I'm moving the old Mac Pro (2006) running OS 10.7.5 that had been connect via ethernet cable to the other end of the house. What do I need to get to connect it wirelessly?
    Thanks,
    Carmen

    Carmen,
    Since the Wireless card was optional back then, you may not have gotten it in your original config?
    You can verify if the hardware is installed several places, as Bob mentioned, do you have the option to enable wireless under your System Prefs \ Network (I would imagine not, since your asking). However, while very unlikely, it may be installed but your not able to see/select it for some reason?
    So, just to make sure, you can also verify via looking under "System Information" (you'll want some info from there anyway).
    "Apple Menu : About This Mac : More Info : System Report : Network : (look for Wi-Fi etc.)" if it exist you'll see the card and info about it.
    If you don't have the option nor see a card was installed you can go about this a few ways.
    1. The absolute easiest route (to NOT have to deal with 3rd party drivers or possible 3rd party issues when you upgrade your OS etc) is check out places like Macsales and see if they have any of the original Air Port extreme cards available and install yourself. - http://eshop.macsales.com/item/Apple/BCM94322MC/
    2. You could talk with Macsales and ask which external USB wireless card works best with your rig (least fussy) and go that route. While several brands work just fine, you just never know when something changes in an update and then your faced with the old pointing fingers thing. Rare, but still....
    Also, while your in the System Information area you'll want to note your model, if it's 2006, I think that's Mac Pro 1,1 ?
    Hope that helps.

  • Will upgrade to mac pro 2010 give huge improvement from mac pro 2006?

    I asked in an earlier post but may not have been clear. Basically, if I upgrade to a new mac pro 2010 quad core 2.8 GHz (12GB ram) will it give me a huge improvement from a mac pro 2006 2.0GHz (with 5GB Ram) and thus reduce the need to render and the time it takes to render? My thoughts are that it will because the graphics card is much more powerful and has more memory and hence any FXplug effects will have better RT playback. Is this a correct assumption?
    Or is this too difficult to quantify. Is it simply "You will see an improvement but..."
    I mainly edit 1080 25p Pro Res.
    Thanks

    Further test has astounded me. I installed my copy of Premiere Pro CS4 on the core i3 iMac. I don't use it on my Mac Pro. I only bought it for Encore CS4 (I had an old copy of Premiere from Windows that I used to upgrade).
    I copied an avchd card to the iMac desktop. I opened the media in Premiere Pro cs4 and played it back at Highest Quality: it was smooth as butter even with transitions. There were 47 minutes of footage that I added to the timeline and exported out as AIC 1080 50i. This took 2 hours 20 minutes!
    I know that this is far from the ideal: ie editing source files from desktop and rendering to the desktop on the system drive (something I would not normally do, but I did not have an FW800 external drive available). I don't like PPro to edit with and was using to compare to my Mac Pro.
    The same clips card were on my internal raid 0 on my Mac Pro. I loaded them onto the timeline in Premiere Pro and it struggled at preview quality and the render to an external esata drive was showing in excess of 15 hours!
    I am amazed. But this raises questions for me too. The core i3 is a 3.06 GHz cpu (hyperthreading but no turbo boost) and shows as four cores (two real, two virtual) in activity monitor. They were at 310% when playing back the avchd files. If I get the 2.8GHz Mac Pro there will be eight cores and turbo boost. Will this be faster than the core i3 in playing back footage and much faster in rendering? Or does the higher clock speed of the i3 mean that for editing it is better but will lose out to the Nehalem Xeon when rendering?
    Translating these finding to an FCP context, might this mean that a rewrap of the avchd to h.264 for editing in FCP is possible? In some cases this might be preferable to transcoding.
    I cannot get over how much better the core i3 performance is over the Woodcrest Xeons. This makes me wonder if the Nehalem Xeons are as good if not better?

  • How I connect a 27 " Mini DisplayPort Display to a Mac Pro 2006?

    Dear All,
    I need to know if I can connect a 27" Mini DisplayPort Display to Mac Pro 2006
    Thanks a lot in advance
    Subalv

    You can certainly do that, the Apple Online store sells it for US$150.
    http://store.apple.com/us/product/H3938LL/A?fnode=MTY1NDA5OQ&s=topSellers
    I have not tested it. It is certainly good to know it exists. I hate paying the premium for "leading edge" equipment, so I am writing from my 2009 Mac Pro with used Apple 30 inch Cimena display.
    If I were to pay what that new display costs, I would buy a new display card to drive it directly. My recommendation is to upgrade your diplay card for US$100 more (than the cost of the adapter) and get a card capable of Dual-Link DVI AND two Mini Displayports.

  • Mac Pro 2006 Kernel Panic

    My stock Mac Pro 2006 just started showing the Kernel Panic screen at start-up. First saw the Kernel Panic this afternoon after leaving the system for less than an hour with a game running (EV Nova in a Pause screen). A reboot brought the system back up for a while, I was running Safari for maybe 10-15 minutes when the Kernel Panic screen showed up again.
    Tried the three stock Apple-recommended reboot options, reboot with X key down, reboot with Opt key down and PRAM reset and reboot. No luck; the Panic Kernel screen came on after each one. Also tried the original OS X 10.4 install disk during and Opt key reboot; same Kernel Panic.
    And 10.5 and 10.6 universal upgrade disks; the 10.6 disk got to the grey screen with the Apple logo and the spinning activity symbol which stopped after a while, the Apple logo went away and no further screen activity; the 10.5 disk actually got to a light blue screen with a cursor, but no other icons, the cursor did change to a text I-bar at certain areas in the center of the screen and the disk drive would spin up after some mouse or keyboard activity, no screen activity and no further progress.
    The boot drive appears to be accessible as the OS on it shows up during the Opt key start-up. I also reset the PRAM several times, so do not think that is the problem. Could the battery need replacing or possibly I have a RAM module just go bad on me?
    Suggestions? Thanks in advance.
    Dave

    Update: I have switched out every RAM module (4 X 512 MB) in turn and switched the two riser cards in every combination of one pair of RAM in the top riser card. After each reboot, the kernel panic screen comes back. Could one bad riser card, even if unpopulated and on the bottom cause the kernel panic? Any way to test my system more without swapping parts other than the RAM in and out?

  • My Mac Pro (2006) has suddenly stopped sending signal to the display monitor.

    My Mac Pro (2006) has suddenly stopped sending signal to the display monitor. It coincided with plugging in an Epson printer via usb - while the system was running. Pretty dumb maybe? Could I have damaged the video card? Anyone ideas? Thanks

    Howdy Le Batch,
    I was looking into the issue you are seeing here, and came across a helpful article for this specific situation. It's named Apple computers: Troubleshooting issues with video on internal or external displays and can be found here:
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Regards,
    Sterling

  • Mac Pro 2006 worth it?

    Someone local to me is selling his Mac Pro 2006. Its a 2 x 2.66 Dual Core with 6 Gigs RAM. No warranty.
    I have been reading about this model and that it cannot boot 64 Bit Snow Leopard and Windows Vista/7 64 Bit because the EMI is only 32 bit.
    I was planning on adding another 6 gigs to have a total of 12 Gigs and want the system to see all the RAM both in Mac OS and Windows.
    The system is 4 years old at this point and don't want to send $1500 for something obsolete but I do love the Mac Pro form factor because of the expandability and don't have $2500+ to buy a new Mac Pro.
    Your thoughts? Pro's ? Con's?
    Thanks all...

    The Specials section is nearly empty, but yes, and I'd expect to see a lot more models, espcially if/when 2010 model is rolled out.
    That said, I use my Mac Pro for Windows 7 Pro 64-bit, and while it feels a little more sluggish than what 2009 model would be (I'm using my own custom built PC with "best of class" parts and oc'd processor) it is quiet, decent system still after 3 yrs.
    The cost of, and lack of parts, like graphics, RAM etc was one reason I went and built my first PC.
    The plus side of that olde Mac Pro is you don't need to jump into Snow Leopard which is still rough around the 64-bit edges of drivers, still runs Tiger if need be as well - latest can be bleeding edge and it can cut both ways.
    If you can get a 60 day guarantee and cut the price to $1200 it might be fine. Otherwise, check out used/ref'd iMac line.

  • Mac pro 2006 won't boot after lion install

    hi,
    under 10.6.8 everything worked fine.  All adapters and peripherals were functional.
    After a normal looking lion install my mac pro 2006 will not make it past the boot screen (Grey Apple logo with spinning wheel).  After a while the spinning wheel stopped spinning but I hear disk I/O continue for some time.  A verbose boot lists the usual output.  The last line visible has a mention of macos_swapon or something like that.  I do note the first couple of lines specify a 64 bit kernel is booting.  I was under the impression that this machine cannot run the 64 bit kernel from snow leopard discussions.
    The video card is an upgraded one (i.e. not the stock card that came with the machine).  However as I said before it was working fine under snow leopard.
    Any ideas?

    I have the same problem.  I did a clean install of Lion and created a temp account.  I was able to use Lion for a bit, then I used the Migration Assistant to bring my regular accounts back in from an external drive.  When that completed I logged off of the temp account and into my main account (without restarting).  Still no problems, Lion was working fine.  I shut the Macbook down for the night.  Now that I'm powering it on the next morning, I only get the Apple logo and spinning wheel. 
    I tried a PRAM zap, but it didn't help.

  • Mac Pro 2006 wont boot up, no video...

    Hello... I have a Mac Pro 2006 and yesterday, it froze up and I had hold the power button down in order for it to turn on, since it was unresponsive... Upon trying to restart the Mac, it just hung at the white screen with the apple logo, and I realized I had a Mac installation cd in the drive, so I figured it was trying to load it. I used the eject button on the keyboard, but the dvd wouldnt eject, so I took the side cover off of the Mac Pro, and manually ejected the dvd... Then I tried to reboot the computer. This time when I tried to boot the mac without the OSX installation dvd in the drive, the computer didn't boot up, my monitor wasn't getting any signal, but the fans, drives and everything still sounded like they were running as normal and the dvd drive still ejects manually... I used the diagnostic lights inside the Mac, and the 1st light is showing trickle power, the 2nd and 3rd lights are red immediately after I press the power button, 4th and 5th aren't lit, the 6th is flashing green, and the 7th is a solid green... The 6th light flashes green whether or not my video card is plugged into a pci slot or not... I have tried booting the system without anything connected, drives, mouse, keyboard, anything and I still get the same lights... Please help... I was wondering if it could be too much thermal paste on the cpus or something of that nature...

    Make sure your Ram is paired correctly when you install it --
    And the long boot time is due to the previous reply. If you don't set a 'boot drive' the mac pro will look everywhere before selecting the OSX installation.
    I've got the dual 300GB Velociprators in raid 0 with 80GB Intel ssd boot drive in my mac pro (same as yours). You can also boost your clock speed by a software trick .. I can get mine over 2.9 MHz before errors start popping up in console.
    (problem is it screws up video playback and time)
    http://www.zdnet.com/blog/apple/overclock-a-mac-pro-or-xserve-in-software/1910?t ag=content;search-results-rivers

  • Mac pro 2006 dont boot but fan's running like ****.

    guys, my mac pro 2006 starts with the fan loud , seems running at total velocity. The video card  doesn't show nothing.  The usbs dont work.  when i extract the video card , the problem is the same.  I take the memory too, and the hd . The problem keeps going on.
    The fan start's from zero to a million rpms.
    The check leds on the motherboard are ok, no one of them are lighting.  If i take every part of the machine and i put  them outside,  the same thing happen.
    can you helpme?

    Make sure your Ram is paired correctly when you install it --
    And the long boot time is due to the previous reply. If you don't set a 'boot drive' the mac pro will look everywhere before selecting the OSX installation.
    I've got the dual 300GB Velociprators in raid 0 with 80GB Intel ssd boot drive in my mac pro (same as yours). You can also boost your clock speed by a software trick .. I can get mine over 2.9 MHz before errors start popping up in console.
    (problem is it screws up video playback and time)
    http://www.zdnet.com/blog/apple/overclock-a-mac-pro-or-xserve-in-software/1910?t ag=content;search-results-rivers

  • Lion install bricked my Mac Pro (2006 model)!

    Hello,
    I apologize for the inflamatory title but I figured the problem I have is real and Apple engineers are more likely to notice the issue with this title.  My apologies if you already noticed my other post.
    My Mac Pro 2006 (first Intel model - dual Xeon 2.66GHZ 8GB) was running fine under 10.6.7 and 10.6.8.
    On the first reboot after the Lion install starts I get the boot screen with the Apple logo and the spinning wheel.  After a while the spinning stops.  The screen stays this way.  Disk IO continues for a little longer but then stops (mostly).  I can ping the machine (DHCP server providing a fixed IP address for the Mac PROs MAC Address) so I know it is somewhat functional.  On another Mac the Lion install went fine.  On that Mac the first thing that happens after the spinning wheel stops is the screen goes into GUI mode.  So I surmise my problem has something to do with graphics.
    When I power cycle and boot with verbose mode I notices a few items of interest:
    1) 64 bit kernel (I thought Apple only supports a 32 bit kernel on this vintage of machine)
    2) A couple of unrecognized device line items.  (I took out a Sonnet expansion Firewire/USB PCIe card and one of the messages went away on a subsequent try.)
    3) The last message I see says something about macosx_swapon (or something close to that).  After that no more screen messages even though disk IO continues.
    I rebooted the machine with an external firewire drive running Snow Leopard.  Everything worked fine.  I went into system profiler and retrieved the info on the video card.
    NVidia GeForce 8800 GT
    Vendor: 0xde
    Device ID:  0x0600
    Revision ID: 0x00a2
    Rom Revision: 3233
    While the Lion specs do not call out specific supported video cards/chipsets, they do mention this card is supported for openCL under Lion so it sounds like the card is supported.
    What I request is a patched Lion installer kit.  I can run this from said external drive after copying the patched installer from my functional Mac.  I'd also strongly suggest the installer thoroughly interrogate the hardware to determine if there are any incompatibilities before the installer triggers the reboot.
    Is there a way I can determine more diagnostic information to subsequently post in this discussion?  Maybe there is a command I can issue in single user mode?
    Thanks in advance! 

    Seems I'm not the only one having this issue. I installed a GeForce 8800GT in my 2006 MacPro 1,1 (2 x 2.00Ghz Xeon Dual Core) that I got off eBay recently and I've also had the same issues (freezes on Apple screen, spinning logo). I actually installed Lion before I put the card in (old card GeForce 7300GT, came with the system) and it worked OK. But when I put in the card, the problems started.
    But I did get an eBay message from the seller who sold me the card, and it turns out at this stage that the Lion drivers have a problem for some reason for 8800GT.
    Here's the info from the system profiler if this helps:
    NVIDIA GeForce 8800 GT
    Vendor:          NVIDIA (0x10de)
    Device ID:          0x0611
    Revision ID:          0x00a2
    ROM Revision:          3233
    Seems to be a widespread issue at the moment....

  • Can I use a Asus Nvidia gt640 with a mac pro 2006?

    Just got my first intel mac! Not the newest thing but it will do. I just have a quick question, can I use the Nvidia gt640 2gb with a Mac pro 2006 with no flashing of the system or the card. Thank's. -Edward

    First, you need to look at what OS version you have.  Mnay people (myself included) running some of the newer OS version are using Nvidia cards not released for the Mac.  OS X Mavericks for example will support these cards, but you lose some functionaility (boot screen, etc.)  Once the machine is up and running they work fine.
    With a 2006 model you are before the 3.1 machines and therefore limited in the OSX version you can run.  I think you need at least 10.7 Lion.
    So if you can run 10.7 the answer is probably, but then you will lose some basic functionality.  For many this is not important.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • Windows and Mac Pro w/ Apple RAID card

    It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
    I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
    So, i've connected SATA drive this way and it works fine with OS X.
    But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
    Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
    I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

    I've tried that.
    Installation and booting of WinXP passed OK if RAID card removed.
    But i've got black screen again trying to boot WinXP after RAID card re-installed.

  • I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    matthewfromwhangarei wrote:
    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?
    If you mean AppleCare, then I would believe the answer will be yes.
    First make sure you have a full backup of everything on your Mac, then run, don't walk to your nearest Apple store.
    Note: Due to your Mac now being in computer years, somewhat elderly, Apple may not have the require parts in stock. This will either mean you might have to leave it with them for a number of days, or maybe they will offer you a new Mac mini. While a new Mac mini (if offered) might be a welcome possibility be aware that the new Mac mini no longer has a CD/DVD drive and it comes with Mac OS X Lion and as a result might not run some of your old software.

Maybe you are looking for