Mac Pro on 10.6.8 freezes after startup

Since updating to 10.6.8 my 2009 MacPro will freeze after startup when opening finder, safari and itunes (so far). No beach ball and ForceQuit doesn't work. Resolved only by a hard shutdown with the off switch and restarting.  Never a problem on restart. This problem seems identical to that described in an archived discussion (after an update to 10.5).  Refer: https://discussions.apple.com/thread/2018112?threadID=2018112  .
I have followed those suggestions without success:
-run AHT and no issues found
-run disk utility to verify and repair permissions
-used Rember to check memory and no issues
Grateful for any suggestions; thank you.

It means that a third-party system modification you installed is causing the problem.
Reboot as usual (not in safe mode) if you haven't already done so. Don't launch any of your usual applications. Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Next, do the same thing with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Next, this command:
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Again, one line. Finally, one more:
ls -1 /Library/{InputManagers,StartupItems}
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Similar Messages

  • HT5918 Mac Pro (Late 2013) Dual monitors freeze on startup?

    I've got 2 monitors, 1 HDMI and 1 MiniDisplayPort/DVI into Thunderbolt, and the computer can't start, it crashes during the boot process. The main screen freezes just as the login comes up, the MDP screen is scrambled, and the mouse cursor is a spinning pizza.
    The only solution so far is to remove the MDP cable during startup, but that is a dealbreaker because dual monitors is the sole reason I bought this, and c'mon it's a really expensive computer -- even my old MacBook could handle 2 monitors!
    Any insights or solutions appreciated.

    Have you tried another cable and adapter?
    Try another DVI monitor to help determine the cause
    Are you using a Thunderbolt port not shared with the HDMI port?
    See the image included here:
    Mac Pro (Late 2013): Using multiple displays
    Rest the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Mac Pro does not recognize inserted DVDs after startup

    When i reboot my mac pro and log in my user in the moment the mac pro starts the finder it tells me that the inserted DVDs could not be recognized. my mac then ask me what it should do: ignore or eject. this happens everytime i at the startup.
    i have a second DVD drive installed. is it a problem that causes out of wrong jumper settings?
    from time to time i have startup problems with my mac and some people told me it is a major problem and i should call the support. is this another sign that my mac has a problem?
    Thanks for your help

    I have that same combo working here. Other than the Sony not reading older 4X DVD "Sony" discs, and saying they are CDs, it operates perfectly. If both drives are set to cable select like hatter said, all should be well.
    Michael

  • 2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior.  No system changes.

    2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior.  No system changes.

    2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior.  No system changes.

  • Why is my Mac Pro wireless keyboard not being found after changing batteries

    Why does my Mac Pro not find the wireless keyboard after changing the batteries.  I restarted the computer but it still doesn't recognize the keyboard?

    Troubleshooting wireless mouse and keyboard issues
    OS X: Bluetooth devices become unresponsive

  • PS CC 2014 freeze after startup

    Photoshop CC 2014 freezes after startup on MacBook Pro.
    Start screen dissapears, all tools and panels are loaded and then the app crashes.
    I tried to reinstall twice but it changed nothing.

    Please read these and proceed accordingly:
    http://forums.adobe.com/docs/DOC-2325
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Acrobat Reader 9.1.x freezes after startup

    Hello,
    Our Acrobat Reader is having problems on some machines during startup that it completly freezes after startup.
    I've traced this with procmon and have seens that a certain file "sharedEvents" is trying to to somthing buth it is hanging on
    lock - unlock. Killing All process of Acrobat Reader and deleting this file and then re-starting the program isn't helping because it keeps 0 kb and the mentioned behaviour is trying to do something with this file.
    the file can be found in %appdata%\adobe\acrobat\9.0
    Our profile's is redirected , it is working for most of the users but some users are having this problem.
    Can anybody tell me what Acrobat Reader is doing with this file and is there a work around to initialize everything back again so the
    user can startup the program normally so it is not freezing after startup without having to remove and install it back again ?
    Best regards,
    Bert

    Hi,
    The problem I'm having is a problem on the journal file. After some more investigating it look that the problem can be related to oplocks since we have enbaled oplocks on our server (were the file is placed trough folder redirection). We will check this ...
    I've already disabled oplocks on client side and then everything is working however we are using Vista in combination with offline files and if you disbale oplocks then offline files will not work so we are looking a bith further to see what we can do on server side ... to be continued ...
    Best regards,
    Bert

  • 2008 Quad 3 Ghz Mac Pro freeze after startup

    I'm writing this on my MacBook Pro since my tower is no longer functional. I'm not sure what to do with it but I'll do my best to describe what it's doing. It is a 2008 Mac Pro, with two dual core 3 Ghz Xenon processors, 10 GB Ram, 3.75 TB hard drive space, ATI Radeon 1900 XT video card.
    Push power to boot up sometimes it boots up normally other times the fan just just excellerates to high and the tower does nothing, and I have to force a shut down. On the next boot up it always does the fan thing again resulting in a second force shut down, then a second attempt to boot back up same result, almost always on the third attempt it will boot up to the desktop. if that's not odd enough it gets weirder.
    Whether it takes me three tries to get to the desktop or it goes there the first try it will run for a few min, then the screen gets blocky (like a pattern of squares or artifacts all over the screen and the system is now completely unresponsive except I can see the mouse moving, I've waited to see if it will come out of it, but it doesn't so I force a shut down.
    At first I thought, maybe my hard drive is failing so I get the System restore OSX disk. It behaves the same way when booted up with the System disc. The more I think and look around I'm beginning to think the video card is going bad. This kind of behavior was intermittent at times but today I can't use it for more than a few min. I took the door off and after letting it set I booted again but again still same thing. the only place that I feel a lot of heat is from the video card especially around the vent near the ports. I've tried removing the card but it doesn't seem to want to come out. I've removed the bracket with the two screws It feels like it's coming out of the socket but something is holding it into the case and I don't want to force it.
    So here are my questions, does this sound like it's a bad video card? And if so is there some trick to getting it out, even if it's just to look at it and perhaps clean any dust out of it in case it's getting clogged.
    Thanks,
    Mike

    it would seem it's in the acceptable range, I'll have to look up Temperature monitor and see if I need to use a SMC Fan Control to up the default.
    The inside was only moderately dusty which I went ahead and cleaned out, I make it a habit of cleaning the insides out from time to time. The only exception being the Radeon 1900 XT which after removing the fan and giving it a good shot of air and a large clump of dust coming out the other end (by the heatsink fins) makes me think that that is the likely culprit of my 1900XT's early demise. Cleaning out the card and putting it back in though made no difference, so I think the overheating damage is done. I have thought about giving the oven bake method a shot if the card is crap anyway there's nothing to lose. Also thought about checking the firmware to see if it needs updated.
    4SNS is a sensor of some kind which I guess the "ICBC" refers to the specific sensor? A search of Mac Pro sensor ICBC came up with "ICBC Current, CPU-B core current" perhaps that will give me an idea what to look for in monitoring the heat. As long as it's not a fatal warning I'm happy, I was starting to freak out a little thinking the logic board was bad and the unit being out of warranty facing the reality of either taking it to a service center and paying an arm and a leg to fix or to just ebay the mac and use the money towards a new or newer MP. I can't really afford to dump close to a thousand bucks into a board replacement at an apple service center. I'm thankful I bought a laptop last year or I'd have no computer to work on. Hopefully once I get the Radeon 5770 sanity will be restored plus the 5770 is a better card than the 1900xt anyway. Mac Connection sure is taking it's sweet time processing the order though...

  • Mac Pro 2.66 powers itself up after shutdown

    Hi,
    Just wondering if any other mac pro users out there have encountered an issue where by your machine powers up of its own accord after shutting down. I have switched off the wake for ethernet access and restart after power failure tick boxes in the energy saver prefs to see if that was the problem but it still happened. I'll try zapping the pram, and see how it goes.
    I can only think that it happened around the time I installed DssW Power Manager on my machine. I used the uninstaller that came with the software so it should have been completely removed from my system.
    Any thoughts on this would be appreciated.
    Mac Pro 2.66   Mac OS X (10.4.9)   Radeon X1900 XT, 3GB RAM, 160GB Startup + 80GB Scratch,

    Hi Hatter,
    This a copy of the terminal instructions that the uninstaller performed:
    Uninstalling...
    sudo: /usr/local/powermanager/bin/powermanagerctl: command not found
    sudo: /usr/local/powermanager/bin/pmassistant.app/Contents/MacOS/pmassistant: command not found
    sudo: /usr/local/powermanager/bin/powermanagerd: command not found
    rm: /Library/Frameworks/PowerManager.framework: No such file or directory
    rm: /Library/PreferencePanes/Power Manager.prefPane: No such file or directory
    rm: /usr/local/powermanager: No such file or directory
    rm: /Library/Application Support/Power Manager: No such file or directory
    rm: /Library/Automator/PMDeleteEvents.action: No such file or directory
    rm: /Library/Automator/PMEvent.definition: No such file or directory
    rm: /Library/Automator/PMListEvents.action: No such file or directory
    rm: /Library/Automator/PMImportEvents.action: No such file or directory
    rm: /Library/Automator/PMExportEvents.action: No such file or directory
    rm: /Library/Automator/PMNewEvent.action: No such file or directory
    rm: /Library/Automator/PMToggleScheduler.action: No such file or directory
    rm: /Library/Automator/PMNextEvent.action: No such file or directory
    rm: /Library/Automator/PMCancelEvents.action: No such file or directory
    rm: /Library/Automator/PMDelayEvents.action: No such file or directory
    rm: /Library/Automator/PMFilterEvents.action: No such file or directory
    rm: /Library/Automator/PMEventsToStrings.caction: No such file or directory
    rm: /Library/Receipts/Power Manager Framework.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager Daemon.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager System Preference.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager Login Window.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager AppleScript Support.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager Automator Actions.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager UNIX Support.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager Widget.pkg: No such file or directory
    rm: /Library/Receipts/Power Manager Menu.pkg: No such file or directory
    rm: /Library/Documentation/Help/Power Manager Help: No such file or directory
    rm: /var/tmp/uk.co.dssw.powermanager: No such file or directory
    rm: /Library/Preferences/uk.co.dssw.powermanager.preferencepane.plist: No such file or directory
    No matching processes were found
    No matching processes were found
    No matching processes were found
    No matching processes were found
    No matching processes were found
    ...Finished
    Could it be the frameworks?
    FYI the DssW Power Manager software for "automated power management". So that you can schedule appropriate times to put itself to sleep say if you forget to do it manually.
    You mentioned about the connected devices, I have an Elgato TV tuner and a Firewire 800 connected external hard drive (which I turn off when the computer is shutdown).
    I'll try the safe boot now.
    Thanks in advance.

  • Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate

    I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
    Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
    This never happens with XP which sleeps and hibernates OK..
    There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.

    Hi
    > There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
    Sorry mate but you are wrong.
    All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
    Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
    I recommend updating the graphic card driver
    Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
    Check if you are using the latest version

  • MacBook Pro makes a noise and freezes after I open the lid and awake it from it's sleep after installing Mt. Lion.  How do I fix this?

    Eversince I installed Mt. Lion my Macbook Pro has been making a long "beeeeeeep" noise and freezes after I try to awake it from it's sleep by opening the lid.  How do I fix this problem? 

    Either the license files were not transferred or it has to be relicensed.
    Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

  • Mac Pro (v1.1) won't login after installing new video card

    Hello,
    I have a Mac Pro from 2006 and after my NVidia 7300GT burned, I bought a Geforce 8800GT to replace my old card. After I installed it to the motherboard following the user manual, I turn on my mac and I get the white screen with the apple logo but it won't login. I left it like that for 30 minutes, then I forced restart and the same thing happens. Does anyone have a clue why this happens and how can it be fixed?
    Thank you

    8800 required 10.5.2 or later (10.5.3 DVD and 10.5.6 DVDs were sold, though now $29 will get you 10.6.3).
    No OS earlier than 10.5.2, in addition to there having been two versions of the card, EFI32 (2006-7) and EFI64 (2008+).
    my link to ebay doesn't list it now:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300448795337#ht3170wt1139

  • Mac Pro Late 2013 USB problems / freezing

    I have a quad-core CPU Mac Pro late 2013 (Model Identifier: MacPro6,1).  MacOS X 10.9.5.
    I have had all sorts of USB devices hooked up to it.  At any one time, I usually have all 4 ports filled.  I have a 3TB USB 3.0 disk that stores my large files, a USB mouse and keyboard (logitech with a usb mini dongle), a cable to charge my logitech USB cordless mouse, Lightning cable to my iPhone 5, and other things that I rotate in and out, like CF card reader, Audio Box USB audio interface from PreSonus, Sony Webcam, etc.
    About 3 months into having the Mac Pro, I noticed that my keyboard went dead in the middle of using it.  The mouse was dead too.  I blamed the RF dongle that they both share, because the Apple Magic Trackpad (bluetooth) I have still functioned.  Try as I might, I couldn't get the keyboard or mouse to work again, so I used the Magic Trackpad to restart the machine, and then my keyboard and mouse worked again.
    It wasn't until later that I realized that all the USB busses on the machine had frozen or "died" temporarily.  I realized it later because my USB hard drive complained about being "ejected improperly."
    Now I have had the USB die on the Mac Pro at least 15 times over the last month and a half.  Usually once every two days or so.
    I have tried (almost one by one) using some of the USB devices on the mac, and removing others to ascertain if it's a certain USB device that is causing this.  But the odd thing is that I never get a message from the OS like "xxx USB device is drawing too much power."
    I'm going a little nuts here because I cannot see any rhyme or reason to the USB interface lock ups.  And each time it happens, all the USB devices go dead until I restart.  Sometimes, I'm able to SSH into the machine from my iPhone and issue a "shutdown -h now" and even though I see the Mac OS X UI shutdown, it never fully halts.  I often have to hold the power button to get the machine to turn off.
    I really can't say if it's software related, hardware related or what.  I've tried to watch my workflow carefully to see if anything seems to make a pattern, but nothing yet.
    Any suggestions? Is anyone else seeing behavior like this?  Do we think it's a USB device... or is my Mac Pro flakey?
    Thanks!

    I was using a hub, so I immediately removed that upon the first issues.  But the USB has still frozen after the removal of the hub. The HD is a self powered G-Tech drive.  I'll have to play around a bit more will all of your suggestions this weekend.
    I woke up the computer just now to check the discussion, an am greeted with a notification from Mavericks that the "Disk Not Ejected Properly. (Eject disk before disconnecting or turning it off)"  which the disk is still connected, and the usb seems to still work fine.  In fact I was able to unplug the USB cable for the G-Tech HD, and then replug it in, everything reappeared fine.  The USB bus was not frozen (this time).
    But it's this kind of flakiness that has me coming and going.  I haven't (yet) been able to identify whether the USB is the problem or the driver or a third thing I haven't figured out...

  • Mac Pro (Snow Leopard) runs slow even after bootup disk is repaired

    My Mac Pro running OS X 10.6.8 continues to run exremely slowly even after the bootup disk was repaired and verified. I did a second safe boot then a regular boot and now I cannot even start any of the applicatsion.  E.g., I cannot start either Mail.app or Safari.
    This ie s exremely upsetting and I would appreciate any help, advice, ... on what I should do to determine the problem.
    VB

    I have had Time Machine backups and I used to have online backups as well until the provider changed terms on me which made it so much more expensive (but that is another story). I have >600 GB available on my1 TB startup drive and I do have quite of a bit of my media files on an additional 500 GB hard drive.  
    However, your mentioning power outages and dorps/dips reminded me that such is indeed a problem where we live. My MacPro is wlays on and when I woke up one morning the login window was on so it obviously had restarted. Then just before  the Mac acted slower than molasses I do remember my UPS beeping but I admittedly sort of ignored it and forgot all about it since this kind of thing happens relatively frequently. 
    I just restarted the system now and everything seems back to normal again. 
    My question:  my Mac Pro as well as my monitor are connected to a 350 VA/200 W UPS.  What is the advantage of using a 1500 VA UPS?
    Thanks.

  • Mac Pro 3,1 with 5770 problems after sleep with Lion

    Hi,
    with 10.7.3 there was a fix for older iMacs with the same issue on an HD 2600 but my mac Pro with the 5770 has the same problem.
    Is the Mac Pro user less important for Apple?
    My card works fine afer restart. No issues and performance problems (cinebench scores 37fps) but when i sleep my mac and then wake it up all graphic UI things are creepy. There are laggy animations and so on and the speed in Aperture is decreased to a minimum. Cinebench scores after wake up only 16fps.
    I bought the card to INCREASE my speed (formerly i have had the HD 2600 built in) and for now, my 249€ is spent for nothing. I dont want to restart my Mac everyday.

    So, i have set up a completely new system with all updates to 10.7.4 and the problem already exists.
    I am not sure, if this was a problem with Lion or with the ATI 5770
    Not really nice

Maybe you are looking for

  • Input menu changing my default keyboard layout-again.  Grrrr!

    This same issue had come up years ago, and I no longer remember with certainty how it was fixed.  It just geared up its ugly head again.  Ever since I can remember, I've been using a custom keyboard layout, which I arbitrarily labeled "Cantabria", th

  • How to install Adobe printer's 'postscript driver' in mac os x

    hello again, as posted recently hv a problem with adobe printer's postscript driver (ppd),In Indesign cs4 It shows ppd is missing while making Print File(.ps), pls suggest how to install ppd again, i tried to install ppd driver downloaded from adobe

  • Password for a zip file

    Dear, We have a procedure which compress and email a file (account stmt) to 100s of customers daily. Please give idea on protecting that zip file with password before emailing. It is something similar to credit cared statement where only the recipien

  • BIREQU_* job consuming more time in R/3 Source system

    Hi Experts, I am performance issues while extracting data from SAP R/3, after upgrade to oracle. R/3 job BIREQU_* takes more time in selection of data. Particularly in step **02.08.2008 15:32:38 *******************************************************

  • Regarding grants in JAVA

    Hi, the file is not getting created in the specified directory. it gives an error "Access permission is denied for read, write and delete" Kindly help me with this error. please see the code below. v_sub_dir_path := v_sub_dir_path || '\RPT_ID_' || to