MAC requests?
I requested my MAC from my current ISP as BT told me upon ordering my new package. This was last week....
I phoned 1st and was told I had to e-mail, which I did, got confirmation e-mail, then the next day they try to get me to stay with them, when I said no they then decide to start the process.
Now they are saying another 5 working days and blaming it on BT wholesale.
Should I just wait, or do something as my switch over is fast approaching (3rd sept) and BT have already sent 2 reminders.
I had problems with another ISP a few years ago and basicly blasted them down the phone as they kept insisting they couldn't just give me my MAC, they had to request it themselves, yada yada... amazingly after 30 mins of being stubborn and repeating the phrase "give me my MAC now" to whatever they said, they did give it to me via e-mail.
Thanks
Steve
http://ask.ofcom.org.uk/help/internet-service/MAC
---x---
Under Ofcom regulations, where a consumer or small business (with 10 or less employees) wishes to change broadband provider, a MAC must be issued within 5 working days of the request.
---x---
Similar Messages
-
Itunes popup on mac requesting for my password, how to turn it off?
When I click the play button on my mac to listen to music it doesn't turn on because itunes keeps requesting for my password for automatic downloads. How do I stop this? It just started after I got my iphone.
@ Ivmedic... Disabling automatic downloads does not resolve this issue. I am having the same issue. I open iTunes and get prompted for my log in info for automatic downloads, if you log in the issue returns the next time you open iTunes same as if you hit cancel. Also you actually have to go through this 2 times when opening iTunes before it stops... Certainly a bug in the 10.5.1 (42) build.
Does anyone know a way of disabling it in the terminal ? -
i am using a mac book pro running osx lion 10.7.5
i was playing duke nukem manhattan project .iam using wine skin. i wanted to stop so i forced it to quit.
after that i got this message
i am sorry the image is upside down .(held the camera upside down)
after i restarted my mac
the diagnostic report or something poped up giving this message i clicked on show more
and this is the report
Interval Since Last Panic Report: 4092566 sec
Panics Since Last Report: 1
Anonymous UUID: DEFE6E4C-6889-41F0-9551-ECDC337B56A3
Fri Dec 19 16:49:30 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002af7c5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff880a38c340, CR3: 0x000000016bfac03a, CR4: 0x00000000000606e0
RAX: 0x00000000d7f3a4b8, RBX: 0xffffff800a38c740, RCX: 0x00000000ffffff80, RDX: 0x00000007fffffc00
RSP: 0xffffff80af0cbe78, RBP: 0xffffff80af0cbe90, RSI: 0xffffff880a38c340, RDI: 0xffffff88e22c67f8
R8: 0xffffff800a5a78ff, R9: 0x0000000000000001, R10: 0x000000016bfac03a, R11: 0xffffff80002dad60
R12: 0xffffff800bd8b8b0, R13: 0xffffff8078c1d000, R14: 0xffffff8078cec000, R15: 0xffffff800a354640
RFL: 0x0000000000010482, RIP: 0xffffff80002af7c5, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff880a38c340, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80af0cbb20 : 0xffffff8000220792
0xffffff80af0cbba0 : 0xffffff80002c4794
0xffffff80af0cbd50 : 0xffffff80002da55d
0xffffff80af0cbd70 : 0xffffff80002af7c5
0xffffff80af0cbe90 : 0xffffff80002c2c06
0xffffff80af0cbeb0 : 0xffffff80002c292b
0xffffff80af0cbee0 : 0xffffff800022f1ad
0xffffff80af0cbf60 : 0xffffff800022f27a
0xffffff80af0cbf90 : 0xffffff800022ccf5
0xffffff80af0cbfb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 44361088050654
last loaded kext at 42264077053352: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80770000, size 16384)
last unloaded kext at 42324296597043: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80770000, size 12288)
loaded kexts:
com.sophos.nke.swi 9.2.0
com.protech.NoSleep 1.3.3
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.8f17
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 6
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 9
USB Device: USB Optical Mouse, 0x17ef (Lenovo), 0x602e, 0xfa130000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
this is my etercheck
and it took a long time to check for daemons and agents
EtreCheck version: 2.0.3 (88)
Report generated December 19, 2014 5:08:51 PM GMT+05:30
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Uptime: 0:20:27
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (322.91 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) Support
[not loaded] com.vmware.kext.vmioplug.12.1.13 (12.1.13) Support
[not loaded] com.vmware.kext.vmnet (0139.86.58) Support
[not loaded] com.vmware.kext.vmx86 (0139.86.58) Support
[not loaded] com.vmware.kext.vsockets (90.5.7) Support
/Library/Application Support/VirtualBox
[not loaded] org.virtualbox.kext.VBoxDrv (4.3.18) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.3.18) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.3.18) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.3.18) Support
/System/Library/Extensions
[loaded] com.protech.NoSleep (1.3.3 - SDK 10.8) Support
[not loaded] com.sophos.kext.sav (9.2.0 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.0 - SDK 10.8) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.protech.NoSleep.plist Support
[invalid?] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.sophos.common.servicemanager.plist Support
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist Support
[loaded] com.BlueStacks.AppPlayer.Service.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
uTorrent ApplicationHidden (/Applications/uTorrent.app)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
VMware Fusion Start Menu Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
CrossOver CD Helper Application (/Applications/CrossOver.app/Contents/Resources/CrossOver CD Helper.app)
iSkysoft_TunesOver_Watch Application (/Users/[redacted]/Library/Application Support/iSkysoft TunesOver/iSkysoft_TunesOver_Watch.app)
Internet Plug-ins: ℹ️
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 Support
Flash Player: Version: 16.0.0.235 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Safari Extensions: ℹ️
Pin It Button
3rd Party Preference Panes: ℹ️
Flash Player Support
NoSleep Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% WindowServer
5% uTorrent
5% Safari
3% hidd
2% Dock
Top Processes by Memory: ℹ️
210 MB WebProcess
130 MB Safari
56 MB Finder
56 MB mds
56 MB CrossOver CD Helper
Virtual Memory Information: ℹ️
1.94 GB Free RAM
1.10 GB Active RAM
222 MB Inactive RAM
1.04 GB Wired RAM
506 MB Page-ins
98 MB Page-outs
so i would be grateful if someone would explain why this happenedA lot of third party junk is installed or running on your machine:
5% uTorrent (do you really use this crap?
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support Useless garbage you've installed.
com.sophos.nke.swi 9.2.0
com.protech.NoSleep 1.3.3 Third party extensions you've installed. -
MAC request but will need to pay £70 contract canc...
Our present BT Total BB Option 1 costs £14.97/month minus a special 'refund' of £7.50/month = £7.47/month. This runs till July 22. However, we're always way over the 10Gb download and this is bumping it up to well over £30/month. So, I rang the "Get your MAC" number and got through to someone who told me that issuing a MAC would effectively mean I want to cancel this contract resulting in a £70 cancellation fee to be added to my next bill. Can BT do this? Why not give me a MAC and let me pay the £7.47/month until July instead of a £70 cancellation fee?
He then tried to offer me a £24.60/month plus 40GB download limit deal instead but I don't think 40GB is going to be enough. I'd like to try BE Unlimited instead but a £70 cancellation fee just to get the MAC seems exorbitant.A mac will not cancel your adsl until you provide said mac to new service provider
and it will expire if not used after 30 days so no point getting it yet
the fee is not for the mac it is penalty for early end of existing contract
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me -
Can to setup Xserve to process all Mac requests for our AD enviornment...
I want to setup one of our XServe to be the directory controller for all of our Mac clients, which the XServe would then pass on to our AD server. Would also like that server to allow searching of Directory Users for iChat, etc. How can I set a system up to basically look like an OD server, but authenticate to our AD server, and also provide directory services to applications like an iChat server?
This system would NOT be pointed to by any PC's. We currently employ about 1300 users, and have about 200 Macs in the building. They want a seemless portal for the Macs in AD. Suggestions, tips, etc? Currently running 10.5.4 on all of our XServes.check these docs:
http://www.afp548.com/filemgmt_data/files/AD-OD-2.1.pdf
http://www.afp548.com/article.php?story=20080304215842264 -
I have reset my password using my iPad. Why does my Mac book not recognise it to allow me to log in to it?
What password did you change and what password is your Mac requesting.
Without details all you will get is guesses. -
Ichat with same .mac account?
Quick question. I have a powerbook and an iMac. I'm on the road a lot and want to be able to chat with the fam while away. Am I able to do this with just one .mac account? If so how? If not, any suggestions? Thanks for the help.
Hi Martin,
The ISP gave a free account when user in any trouble, ms upfront. Antwerp, Belgium, BlackiBook,virgin, Skynet provider. Default.
Yesterday: iMac24" clean from manuf. User had Linksys only started after Mac request, start and initiation, (.Mac account existing) network connection by start procedure mac.
IMS upfront. iChat not yet initialised. iChat does video, IMS does not, I see
more simularities. Both occasions, same result. I was not excpecting this.
I have not understood this bit.
What MS Upfront ?
(It is probably dead obvious but it escapes me at the moment)
What is IMS ?
Do you mean you get a pop up from AIM Pages ?
What exactly is in the Trash can ?
What IM Application ?
<Late here may be sometime before I get back>
11:04 PM Wednesday; May 9, 2007 -
Safari, Itues, MSN and Update-programm doesnt open anymore!
Hey Apple-Team!
I have a unusuall problem.
Yesterday my mac requested me to turn it off, during i was installing a safrai update. when i switched my mac on again, i was unable to use any programm that uses the internet!!
My Airport ist active and shows that i have a great singanl ! but any application/programm such as safari itunes etc. doesn`t opne anymore. when i click on the symbol eg. the safari symbol it jumps up and down for 5 second as usually but then it stops and does nothing. in other words the programm doesn´t open anymore.
Moreover the softwareupdater doesnt upen too (i quess its caused by the same problem, that no programm that uses the internet doesn`t open anymore"
thankfull in advance yours Helpseeker
Ps: i am just 19 years old and not a prodigy concerning mac etc. so please use a "freshman" explination!Welcome to the Apple forums. There is no one from Apple here: we are all users like you and offer suggestions depending on what information we have. Unfortunately from your description, you have had a kernel panic (KP). The computer or OS has had a problem and stopped. Most can be fixed easily, although some may require a bit more work.
If your reading English is up to it, try Doctor Smoke's FAQ on Kernel Panics as there are several useful ideas there. (Buy his book if you can.)
You have restarted and there are problems, so I would suggest a restart with the grey install disk. Select the language then use the menu at the top of the screen to access the Utilities and the application, Disk Utility. Repair the disk.
If you have added RAM recently, that can sometimes be a cause of the KP so removing/replacing that might help (if that is a cause).
It might be helpful as this is internet related if you use Network preferences and create a new Location. Perhaps if you are using "Automatic" there are some settings/data in there that may be causing conflicts.
It might also be useful to create a new Admin account and to work from there (if the other account has problems). Until you can safely use Safari (it is not properly downloaded and the old version is compromised) try to use Firefox or another browser.
In the username>Library>Preferences folder, there are files that end in .plist (property list), find those for Safari, and put them in the Trash.
Try these things and come back to the forum and let us know how it went. If my words are not clear (I know there is a lot here) come back and we will try and explain in another way.
You know how to make coffee? . . . . -
File sharing issues make file sharing a pain! Is there a fix?
Noted since install of Snow Leopard, I'm having issues accessing, editing, or renaming files/folders in a "shared" folder.
I work from multiple platforms in multiple locations, as does my staff. Typically I need to: create a file on my office iMac, edit it from my home iMac, edit again on the road from my MacBook Air, have an associate proof/edit/polish from a Windows desktop, and final edits from my office iMac.
Formerly done on a shared folder on the office iMac, we ran into constant permission & access issues (see prior unresolved posts). We've abandoned that approach.
We are now facing the same issues with a new shared folder on the office Windows based server. I can't rename folders I created, I'm not allowed access to files I've created.
We believe this is related to changes to SMB software, but have not located a fix that lets us operate the way we used to, ..the way we need to.
Appears Apple SMB is locking folders & files and not unlocking when appropriate - example create folder from office iMac and later with everything closed and only Finder running not being able to rename the folder.You can do this if you keep your wits about you and manage the unexpected additional complexity.
Keep in mind:
The sharing login screens presented each time you reach across to the other Mac request the name and password of a User on the REMOTE computer, but are on the screen of the local computer.
If you are not connected to the User you need, or are connected as "Guest", break the connection and connect again as the specific user you need. -
First off my advice is not to use your Mac as an Administrator only provide Admin Password when your Mac requests and only when your "Child" is not in the room!!!
It is all to do with Permissions: Login as an Administrator click on Go in the menu bar, Select Computer, Select Macintosh HD, Select Users Select the User Folders you want to look at you will see a series of folders with red circles highlight each one in turn and Get Info unlock the Padlock in the Info pane then add Administrator to Read/Write
After this I hope you and your Son stay friends for many years -
File sharing issues in one direction through ethernet cable
I have 2 macs, running 10.6.8. I have connected them through an ethernet cable. I have turned file sharing on. I can connect to the other computer on both computers, and I can see the directories in the finder on both computers. If I go to my desktop computer and try to copy something from the laptop to the desktop computer, it asks for a login, and then it copies no problem.
If I go to the laptop and try to do the same copy (laptop to desktop computer), I enter my password and get:
The operation can’t be completed because you don’t have permission to access some of the items.
If it's a single file I try to copy, then I get:
The operation can’t be completed because an item with the name “” already exists.
And a zero-byte file is copied to the desktop computer.
I note that when I try from the desktop, I don't get the file sharing login where I can choose guest of registered user. I get a finder permission login instead.
What gives? Do i have some setting wrong somewhere?
Thanks
MarkYou can do this if you keep your wits about you and manage the unexpected additional complexity.
Keep in mind:
The sharing login screens presented each time you reach across to the other Mac request the name and password of a User on the REMOTE computer, but are on the screen of the local computer.
If you are not connected to the User you need, or are connected as "Guest", break the connection and connect again as the specific user you need. -
Macbook Pro EFI Firmware update
Hi,
i have a macbook pro bought in may 2011. (updated to Lion OS)
Yesterday my MAC request firmware update (EFI).
after 16 hourd is still updating.
The display show me a grey screen with a circle progress bar...
too long! isn't it? I am a little bit scared of powering off the machine..
Please let me know what should i do..
Thank you in advancenikulr wrote:
Also, my version of MacBook EFI Firmware Update is at 1.2
I have that same 1.2 update on my new Macbook Pro. It transferred over when I used set up assistant to migrate everything over from my old Macbook Pro. That 1.2 came originally in 2006 I believe. As it stated it will not run on your current machine - I got the same message. According to your specs above which are identical to mine you don't need this current update, you already have a later one on your machine as I do. There's nothing that you need to do.
John -
Hi,
I use spa502g ip phone with spa500s connect to an asterisk server. I want to know, how I can call the voicemail of extension 7999 directly without the choice of the extension? I try to insert
fnc=sd+cp+blf;sub=*987999@pbxIp
in the attendant console, but it's the same than when I call *98 without the number of extension...
Thank you and sorry for my bad englishOk, I try with fnc=sd;ext=*987999@myIp but it still doesn't works, I always be redirect to simple *98 service.
This is my spacfg.xml
Static IP
192.168.100.242
ciscospa502g
255.255.255.0
192.168.100.254
212.27.40.240
212.27.40.241
SPA502G
CCQ17040C92
7.5.2
1.0.4
E02F6D629A01
Installed
Open
None
9/17/2013 15:56:22
00:13:44
4
168
670
67029
0
0
301
48160
211
33760
40
19601
39
22350
N/A
100M Full Duplex
Link Down
Registered
9/17/2013 15:54:21
113 s
No
Idle
None
G711u
G711u
Outbound
No
*98
00:00:01
301
211
48160
33760
70 ms
0 ms
Not Available
0 ms
0
0
0
0
0 ms
0 ms
Idle
None
Idle
Not Installed
Not Installed
Not Installed
Yes
80
Yes
SIP
Yes
No
No
Normal
Static IP
192.168.100.242
255.255.255.0
192.168.100.254
ciscospa502g
212.27.40.240
212.27.40.241
Manual
Parallel
No
0
No
Yes
No
Yes
Yes
3
1
No Limit
No
1
70
5
2
$VERSION
$VERSION
application/dtmf-relay
application/hook-flash
No
No
No
No
No
No
No
No
Yes
No
Yes
5060
5080
No
PAID-RPID-FROM
x-sipura
No
No
No
No
.5
4
5
16
16
16
16
16
240
30
1
7200
30
1200
10
7200
10
10001
10040
0.020
0
0
No
No
No
101
98
97
2
96
99
112
113
G711u
telephone-event
PCMU
PCMA
G726-16
G726-24
G726-32
G726-40
G729a
G729ab
G722
encaprtp
No
No
No
No
No
No
No
No
15
No
No
224.168.168.168:6061
Yes
none
Yes
Yes
Yes
2
600
3600
3600
14400
Yes
Yes
Yes
/spa$PSN.cfg
66,160,159,150,60,43,125
https
$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH
$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH
$PN $MAC -- Resync failed: $ERR
Yes
Yes
3600
$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH
$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR
$PN $MAC -- Upgrade failed: $ERR
350@-19,440@-19;10(*/0/1+2)
420@-16;10(*/0/1)
520@-19,620@-19;10(*/0/1+2)
480@-19,620@-19;10(.5/.5/1+2)
480@-19,620@-19;10(.25/.25/1+2)
480@-10,620@0;10(.125/.125/1+2)
440@-19,480@-19;*(2/4/1+2)
440@-10;30(.3/9.7/1)
600@-16;1(.25/.25/1)
985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
600@-19;25(.1/.1/1,.1/.1/1,.1/9.5/1)
350@-19;20(.1/.1/1,.1/9.7/1)
397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
600@-16;.3(.05/0.05/1)
600@-19;.2(.05/0.05/1)
440@-10;30(.3/9.7/1)
60(2/4)
60(.3/.2,1/.2,.3/4)
60(.8/.4,.8/4)
60(.4/.2,.3/.2,.8/4)
60(.2/.2,.2/.2,.2/.2,1/4)
60(.2/.4,.2/.4,.2/4)
60(4.5/4)
60(0.25/9.75)
60(.4/.2,.4/2)
255
1800
30
.5
10
3
*69
*66
*86
*72
*73
*90
*91
*92
*93
*56
*57
*71
*70
*67
*68
*81
*82
*77
*87
*78
*79
*16
*17
*18
*19
*96
*38
*36
*39
*37
*03
*017110
*027110
*017111
*027111
*01722
*02722
*0172616
*0272616
*0172624
*0272624
*0172632
*0272632
*0172640
*0272640
*01729
*02729
GMT+01:00
Yes
Yes
-16
.1
12dB
ISO-8859-1
en-US
CISCOSPA502G
CISCOSPA502G
*97
Default
Text Logo
Auto
No
300
Background Picture
1
$USER
private
2
Scrollable
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
1
No
n=Classic-1;w=3;c=1
n=Classic-2;w=3;c=2
n=Classic-3;w=3;c=3
n=Classic-4;w=3;c=4
n=Simple-1;w=2;c=1
n=Simple-2;w=2;c=2
n=Simple-3;w=2;c=3
n=Simple-4;w=2;c=4
n=Simple-5;w=2;c=5
n=Office;w=4;c=1
n=Pulse;w=5;c=1
n=Du-dut;w=6;c=1
0
0
0
0
0
0
pggrp=224.168.168.168:34560;name=All;num=800;listen=yes;
No
Enterprise
No
None
Trusted
No
No
em_login|1;acd_login|1;acd_logout|1;astate|2;avail|3;unavail|3;redial|5;dir|6;cfwd|7;dnd|8;lcr|9;pickup|10;gpickup|11;unpark|12;em_logout
lcr|1;miss|4
redial|1;dir|2;cfwd|3;dnd|4;lcr|5;unpark|6;pickup|7;gpickup|8;starcode|11;alpha|12
dial|1;delchar|2;clear|3;cancel|4;left|5;right|6;starcode|7;alpha|8;dir
endcall|2
hold|1;endcall|2;conf|3;xfer|4;toggle;bxfer;confLx;xferLx;park;phold;flash;
hold|1;endcall|2;xfer|4;toggle;
hold|1;endcall|2;conf|3;toggle;
hold|1;endcall|2;join|4
endcall|2;
resume|1;endcall|2;newcall|3;redial;dir;cfwd;dnd
answer|1;ignore|2;toggle|4
newcall|1;barge|2;cfwd|3;dnd|4
resume|1;barge|2;cfwd|3;dnd|4
Yes
private
3600
No
No
No
$NOTIFY
$PROXY
0x68
3
0xb8
6
high
up and down
UDP
5060
No
Yes
No
4
No
0
none
0
No
No
Yes
Yes
none
No
No
No
No
4
86400
No
No
No
Yes
No
No
192.168.100.240
No
Yes
Yes
No
300
No
No
No
3600
Normal
No
CISCO
8001
No
G711u
No
G711a
Unspecified
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Auto
0
0
No
Default
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
Yes
No
20
Yes
No
No
No
No
No
Yes
Speaker
No
12hr
month/day
Yes
Yes
automatic
source
media
Yes
No
No
Yes
Yes
9
8
10
10
Auto
Default
Yes
8
10 s
1800
30
Yes
1
Yes
Asterisk
No
*8
*68
*88
Yes
12
7
fnc=sd+cp+blf;[email protected]
fnc=sd+cp+blf;[email protected]
fnc=sd;ext=*[email protected]
and this is the log of the call in asterisk
<------------->
[2013-09-17 16:42:40] VERBOSE[32523] chan_sip.c: --- (8 headers 0 lines) ---
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
INVITE sip:*[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-834fc996
From: "CISCO" ;tag=5826b042144b7d5do0
To:
Call-ID: [email protected]
CSeq: 101 INVITE
Max-Forwards: 70
Contact: "CISCO"
Expires: 240
User-Agent: Cisco/SPA502G-7.5.2
Content-Length: 397
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
Supported: replaces
Content-Type: application/sdp
v=0
o=- 3640 3640 IN IP4 192.168.100.242
s=-
c=IN IP4 192.168.100.242
t=0 0
m=audio 10035 RTP/AVP 0 8 2 9 18 96 97 98 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:9 G722/8000
a=rtpmap:18 G729a/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
a=sendrecv
<------------->
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: --- (14 headers 18 lines) ---
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: Sending to 192.168.100.242:5060 (NAT)
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Sending to 192.168.100.242:5060 (NAT)
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Using INVITE request as basis request - [email protected]
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found peer '8001' for '8001' from 192.168.100.242:5060
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c:
<--- Reliably Transmitting (NAT) to 192.168.100.242:5060 --->
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-834fc996;received=192.168.100.242;rport=5060
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as09f233a1
Call-ID: [email protected]
CSeq: 101 INVITE
Server: FPBX-2.11.0(11.5.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="2847dbe8"
Content-Length: 0
<------------>
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Scheduling destruction of SIP dialog '[email protected]' in 6400 ms (Method: INVITE)
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
ACK sip:*[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-834fc996
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as09f233a1
Call-ID: [email protected]
CSeq: 101 ACK
Max-Forwards: 70
Contact: "CISCO"
User-Agent: Cisco/SPA502G-7.5.2
Content-Length: 0
<------------->
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: --- (10 headers 0 lines) ---
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
INVITE sip:*[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-6132ab66
From: "CISCO" ;tag=5826b042144b7d5do0
To:
Call-ID: [email protected]
CSeq: 102 INVITE
Max-Forwards: 70
Authorization: Digest username="8001",realm="asterisk",nonce="2847dbe8",uri="sip:*[email protected]",algorithm=MD5,response="f4a1ef5ed0d7e5bec2c603a783fe04ff"
Contact: "CISCO"
Expires: 240
User-Agent: Cisco/SPA502G-7.5.2
Content-Length: 397
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
Supported: replaces
Content-Type: application/sdp
v=0
o=- 3640 3640 IN IP4 192.168.100.242
s=-
c=IN IP4 192.168.100.242
t=0 0
m=audio 10035 RTP/AVP 0 8 2 9 18 96 97 98 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:9 G722/8000
a=rtpmap:18 G729a/8000
a=rtpmap:96 G726-40/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:98 G726-16/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
a=sendrecv
<------------->
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: --- (15 headers 18 lines) ---
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Sending to 192.168.100.242:5060 (NAT)
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Using INVITE request as basis request - [email protected]
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found peer '8001' for '8001' from 192.168.100.242:5060
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] netsock2.c: == Using SIP RTP TOS bits 184
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] netsock2.c: == Using SIP RTP CoS mark 5
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 0
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 8
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 2
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 9
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 18
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 96
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 97
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 98
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found RTP audio format 101
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format PCMU for ID 0
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format PCMA for ID 8
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format G726-32 for ID 2
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format G722 for ID 9
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format G729a for ID 18
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found unknown media description format G726-40 for ID 96
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found unknown media description format G726-24 for ID 97
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found unknown media description format G726-16 for ID 98
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Found audio description format telephone-event for ID 101
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Capabilities: us - (gsm|ulaw|alaw), peer - audio=(ulaw|alaw|g726|g729|g722)/video=(nothing)/text=(nothing), combined - (ulaw|alaw)
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Peer audio RTP is at port 192.168.100.242:10035
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: Looking for *98 in from-internal (domain 192.168.100.240)
[2013-09-17 16:42:46] VERBOSE[32503] chan_sip.c: set_destination: Parsing for address/port to send to
[2013-09-17 16:42:46] VERBOSE[32503] chan_sip.c: set_destination: set destination to 192.168.100.242:5060
[2013-09-17 16:42:46] VERBOSE[32503] chan_sip.c: Reliably Transmitting (NAT) to 192.168.100.242:5060:
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.100.240:5060;branch=z9hG4bK5b2eaf36;rport
Max-Forwards: 70
From: ;tag=as1ae3104c
To: "CISCO" ;tag=4b051e1ec62e863d
Contact:
Call-ID: [email protected]
CSeq: 103 NOTIFY
User-Agent: FPBX-2.11.0(11.5.0)
Subscription-State: active
Event: dialog
Content-Type: application/dialog-info+xml
Content-Length: 207
<?xml version="1.0"?>
confirmed
[2013-09-17 16:42:46] VERBOSE[32503] chan_sip.c: == Extension Changed 8001[ext-local] new state InUse for Notify User 8001
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c: list_route: hop:
[2013-09-17 16:42:46] VERBOSE[32523][C-00000006] chan_sip.c:
<--- Transmitting (NAT) to 192.168.100.242:5060 --->
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-6132ab66;received=192.168.100.242;rport=5060
From: "CISCO" ;tag=5826b042144b7d5do0
To:
Call-ID: [email protected]
CSeq: 102 INVITE
Server: FPBX-2.11.0(11.5.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact:
Content-Length: 0
<------------>
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] pbx.c: -- Executing [*98@from-internal:1] Answer("SIP/8001-00000008", "") in new stack
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] chan_sip.c: Audio is at 10032
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] chan_sip.c: Adding codec 100003 (ulaw) to SDP
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] chan_sip.c: Adding codec 100004 (alaw) to SDP
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] chan_sip.c: Adding non-codec 0x1 (telephone-event) to SDP
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] chan_sip.c:
<--- Reliably Transmitting (NAT) to 192.168.100.242:5060 --->
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-6132ab66;received=192.168.100.242;rport=5060
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as466725aa
Call-ID: [email protected]
CSeq: 102 INVITE
Server: FPBX-2.11.0(11.5.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact:
Content-Type: application/sdp
Content-Length: 265
v=0
o=root 2104859674 2104859674 IN IP4 192.168.100.240
s=Asterisk PBX 11.5.0
c=IN IP4 192.168.100.240
t=0 0
m=audio 10032 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv
<------------>
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
SIP/2.0 200 OK
To: "CISCO" ;tag=4b051e1ec62e863d
From: ;tag=as1ae3104c
Call-ID: [email protected]
CSeq: 103 NOTIFY
Via: SIP/2.0/UDP 192.168.100.240:5060;branch=z9hG4bK5b2eaf36
Server: Cisco/SPA502G-7.5.2
Content-Length: 0
<------------->
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: --- (8 headers 0 lines) ---
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
ACK sip:*[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-e8d91c8c
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as466725aa
Call-ID: [email protected]
CSeq: 102 ACK
Max-Forwards: 70
Authorization: Digest username="8001",realm="asterisk",nonce="2847dbe8",uri="sip:*[email protected]",algorithm=MD5,response="f4a1ef5ed0d7e5bec2c603a783fe04ff"
Contact: "CISCO"
User-Agent: Cisco/SPA502G-7.5.2
Content-Length: 0
<------------->
[2013-09-17 16:42:46] VERBOSE[32523] chan_sip.c: --- (11 headers 0 lines) ---
[2013-09-17 16:42:46] VERBOSE[32747][C-00000006] pbx.c: -- Executing [*98@from-internal:2] Wait("SIP/8001-00000008", "1") in new stack
[2013-09-17 16:42:47] VERBOSE[32747][C-00000006] pbx.c: -- Executing [*98@from-internal:3] NoOp("SIP/8001-00000008", "app-dialvm: Asking for mailbox") in new stack
[2013-09-17 16:42:47] VERBOSE[32747][C-00000006] pbx.c: -- Executing [*98@from-internal:4] Read("SIP/8001-00000008", "MAILBOX,vm-login,,,3,2") in new stack
[2013-09-17 16:42:47] VERBOSE[32747][C-00000006] file.c: -- Playing 'vm-login.gsm' (language 'fr')
[2013-09-17 16:42:50] VERBOSE[32523] chan_sip.c: Really destroying SIP dialog '[email protected]' Method: REGISTER
[2013-09-17 16:42:51] VERBOSE[32523] chan_sip.c: Really destroying SIP dialog '[email protected]' Method: REGISTER
[2013-09-17 16:42:52] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
BYE sip:*[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-def5f005
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as466725aa
Call-ID: [email protected]
CSeq: 103 BYE
Max-Forwards: 70
Authorization: Digest username="8001",realm="asterisk",nonce="2847dbe8",uri="sip:*[email protected]:5060",algorithm=MD5,response="8a4e6470356a8e1ea82eb36413e682cf"
User-Agent: Cisco/SPA502G-7.5.2
Content-Length: 0
<------------->
[2013-09-17 16:42:52] VERBOSE[32523] chan_sip.c: --- (10 headers 0 lines) ---
[2013-09-17 16:42:52] VERBOSE[32523][C-00000006] chan_sip.c: Sending to 192.168.100.242:5060 (NAT)
[2013-09-17 16:42:52] VERBOSE[32523][C-00000006] chan_sip.c: Scheduling destruction of SIP dialog '[email protected]' in 6400 ms (Method: BYE)
[2013-09-17 16:42:52] VERBOSE[32523][C-00000006] chan_sip.c:
<--- Transmitting (NAT) to 192.168.100.242:5060 --->
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.100.242:5060;branch=z9hG4bK-def5f005;received=192.168.100.242;rport=5060
From: "CISCO" ;tag=5826b042144b7d5do0
To: ;tag=as466725aa
Call-ID: [email protected]
CSeq: 103 BYE
Server: FPBX-2.11.0(11.5.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0
<------------>
[2013-09-17 16:42:52] VERBOSE[32747][C-00000006] app_read.c: -- User disconnected
[2013-09-17 16:42:52] VERBOSE[32747][C-00000006] pbx.c: -- Executing [h@from-internal:1] Hangup("SIP/8001-00000008", "") in new stack
[2013-09-17 16:42:52] VERBOSE[32747][C-00000006] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/8001-00000008'
[2013-09-17 16:42:52] VERBOSE[32503] chan_sip.c: set_destination: Parsing for address/port to send to
[2013-09-17 16:42:52] VERBOSE[32503] chan_sip.c: set_destination: set destination to 192.168.100.242:5060
[2013-09-17 16:42:52] VERBOSE[32503] chan_sip.c: Reliably Transmitting (NAT) to 192.168.100.242:5060:
NOTIFY sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.100.240:5060;branch=z9hG4bK60445d1d;rport
Max-Forwards: 70
From: ;tag=as1ae3104c
To: "CISCO" ;tag=4b051e1ec62e863d
Contact:
Call-ID: [email protected]
CSeq: 104 NOTIFY
User-Agent: FPBX-2.11.0(11.5.0)
Subscription-State: active
Event: dialog
Content-Type: application/dialog-info+xml
Content-Length: 208
<?xml version="1.0"?>
terminated
[2013-09-17 16:42:52] VERBOSE[32503] chan_sip.c: == Extension Changed 8001[ext-local] new state Idle for Notify User 8001
[2013-09-17 16:42:52] VERBOSE[32523] chan_sip.c:
<--- SIP read from UDP:192.168.100.242:5060 --->
SIP/2.0 200 OK
To: "CISCO" ;tag=4b051e1ec62e863d
From: ;tag=as1ae3104c
Call-ID: [email protected]
CSeq: 104 NOTIFY
Via: SIP/2.0/UDP 192.168.100.240:5060;branch=z9hG4bK60445d1d
Server: Cisco/SPA502G-7.5.2
Content-Length: 0
<------------->
[2013-09-17 16:42:52] VERBOSE[32523] chan_sip.c: --- (8 headers 0 lines) ---
[2013-09-17 16:42:58] VERBOSE[32523] chan_sip.c: Really destroying SIP dialog '[email protected]' Method: BYE
[2013-09-17 16:43:02] VERBOSE[32744] asterisk.c: -- Remote UNIX connection disconnected
Thank you -
Hi All,
Problem is, I can video chat with my brother, who also has a Mac, no problem
Both using Mac accounts.
When I try to contact my son, who has a PC (poor chap) we can text chat OK, but no video.
The requests get rejected even though 'accept' has been clicked.
So... I've set up a PC (laptop) at home here so I can test the system, talking Mac to PC, and PC to Mac.
I've downloaded the AIM software and got an AIM screen name for the PC.
Now...
Both can 'see' the other and both know when each is available.
I can set up a text chat between the two.
When the PC requests a video chat from the Mac, it works fine.
But... When the Mac requests a video chat with the PC, the PC gets the request and I click 'accept' on the PC.
Then the Mac says 'starting video chat with PC' but then says 'PC rejected the request', and the PC says 'request timed out'.
I don't know if whatever this problem is, it relates to the problems with contacting my son, but obviously there's a problem somewhere that could be sorted.
I regularly check the speed this end, and it's normally between 850k and 950k both down and up. Sometimes close to 1M.
I'm using an Airport Extreme base station, with internet connection via wireless network to a hill about 9.4kM away.
Don't suppose that's relevant.
All ideas welcome.
Thanks in advance.
RonHi Steve,
The AIM is version 6.1.41.2 - just downloaded.
You are right. Just tried changing the Win firewall setting to 'medium/low', whatever that means, and it now works both ways.
So the problem with connecting to my son's computer may be something similar.
I'm afraid I've no idea about Win's firewall settings.
There should be some better way of changing it for video chat without this general 'medium/low' thing.
Thanks.
Ron -
Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
ThanksThanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.
Maybe you are looking for
-
Compressor doesn't open and show windows properly
Haven't used Compressor for a while and when I open it I don't get the windows, just the bar at the top. Choosing a windows layout doesn't work and although you can switch on the inspector, settings/destination and history windows I can't display the
-
Is there any logical flaw in this query?
DB version:10gR2 Do you see any logical flaw, room for improvement in this query SELECT SHIP_QRY.RCVD_SHPMT_NBR, SHIP_QRY.ORIG_SHPMT_NBR, SHIP_QRY.DC_ORD_NBR, SHIP_QRY.WORK_ORD_NBR, SHIP_QRY.MFG_PLNT, SHIP_QRY.CONS_CASE_PRTY, SHIP_QRY.CONS_PRTY_DATE,
-
Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me
-
Change log on changing or adding additional position in org model?
If an employee is assigned to a position in the org model is there a log? In CDHDR, CDPOS I can see an entry that updates BUT050 to the org unit. But a org unit could have mulitple positions and if a user gets extended to a 2nd or 3rd position we c
-
Need Help in Moving from ABAP to NW Portal Development
Hello Experts, I am ABAP Programmer. I am not having JAVA background and intrested in Portal Development. I had found following courses: JA100, JA300, JA310, SAPEP, TEP12. Please let me know whether these shortlisted courses are correct or not.