Mac vs Windows - cost of lost time from viruses, spyware, adware

My entire office just returned from a convention. Due to the open network at the convention, they set up a table back in the office where every single person who used a laptop at the convention must have IS check for and remove all viruses, adware and spyware. The lead IS network person had 60 on her laptop, other laptops are just as bad.
The cost of owning a Windows machine: hours of lost productivity as the IS department checks a hundred machines, and lost productivity as the owners wait to get their machines back.
Macs are more expensive? Hah! I walked in, showed my MacBook Pro and was waved through with, "I wish I had a Mac."

Macs are more expensive? Hah! I walked in, showed my MacBook Pro and was
waved through with, "I wish I had a Mac."
Well, I wouldn't take security so easy, even with a Mac.
There are (even few) viruses for the Mac and there is also a chance to get spyware on your computer.
So although the risk is low, I decided to have a virus scanner on my Mac running and regularly updating. Furthermore I configured the internal firewall to be as strict as possible (e.g. enabled stealth mode and check regularly that all services not needed are really disabled, maybe a bit paranoid, confessed).
Let me share an interesting (maybe wired) thought:
I noticed that within the last months, many security holes of OS X are coming to the public (e.g. WLAN exploit). Very likely because of the Mac became more popular (thanks to iPod and so also more people are using it.
The problem... a hacker can reach millions of people when writing spyware for Windows and only a few ten thousands when spending the same time for developing a Mac one. Currently, at least.
However the Mac's popularity grows and simultaneously it makes also more sense (for a hacker) to write viruses and spyware.
And while many Windows viruses and spyware is written by script kiddys, it takes a lot of more knowledge to hurt OS X. Good ? Sure, but there is another risk... experienced hackers could start developing for OS X and it may become a hard job for Apple to work against them.
The reason simply is that OS X hasn't been "publicly tested" as much as Windows. So there are surely a lot of hidden bugs, even security related. Let's face, no operating system is bug free, not the complex ones we all use today.
So maybe we should call it "Interesting times, today" and wait what happens. But generally I agree... Windows is the most insecure operating system. This is not a "I hate MS" opinion, but I daily work with both worlds and can't say how often I had to totally reinstall Windows on my laptop while using my PB for over two years.
Let's say "thank you" to Microsoft that hackers are spending their time on Windows and not on OS X

Similar Messages

Does an mac air need any internet/security protection from viruses etc. ?

I was wondering does the mac need any interent security such as kaspersky or norton installed for protection? or is there already protection from viruses etc on the software installed? Thanks

1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware. 3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.) Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable. The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
Software of any kind is distributed via BitTorrent. or Usenet, or on a website that also distributes pirated music or movies.
Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, your browser, or anything else.
Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
High-priced commercial software such as Photoshop is "cracked" or "free."
An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
You win a prize in a contest you never entered.
Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
Anything online that you would expect to pay for is "free."
Unexpected events
You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an institutional policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Hi I have a Canon D420 and I added it on my mac by windows configure but every time i print i get this Canon UFR ll Printer Driver error -50. What should I do?

I try to print but I get error -50. What should I do?

The Hardware Test detected a RAM problem. Take out the chips and make certain that the connections are clean and reinstall them. Make certain that they are well seated.
If the problem occurs again, test with one chip at a time. Also swap bays if necessary.
Please indicate if you have installed new RAM and if so what brand and the specifications.
Ciao.
Message was edited by: OGELTHORPE

How do I protect my iPad from viruses, spyware, malware etc

Does apple require virus protection

You don't need antivirus as long as you don't Jailbreak your iPad.
http://support.apple.com/kb/HT3743

Using on Mac and Windows

I want to purchase CS6 design standard and before I do I wanted to know:
Can I use the products on Mac and windows (at the same time and one at a time) or do I have to purchase for each platform separately?
How many systems can I install and use on simultaneously?

So even for volume license the splitting of the suite to install its components on different machines is not allowed?
I know thats what is clearly stated in the EULA FAQ link you provided but it does not mention volume licensing
See http://www.adobe.com/volume-licensing/policies.html
CLP and EA Policies > EULAs
All use of a product is governed by the EULA for the product, which usually must be accepted by electronic click-through. EULAs are posted on the Adobe product license agreements page. Where the CLP 5 and EA terms and conditions conflict with a EULA, the CLP 5 and EA terms and conditions supersede.
one of my local resellers said I could slice it. Thats why I want to confirm.
What you're calling "slicing" is what Adobe's EULA terms "unbundling".
4.5 No Unbundling. The Software may include various applications and components, may allow access
to different Adobe Online Services, may support multiple platforms and languages, and may be
provided to Customer on multiple media or in multiple copies. Nonetheless, the Software is designed
and provided to Customer as a single product to be used as a single product on Computers as permitted
herein. Unless otherwise permitted in the Documentation, Customer is not required to install all
component parts of the Software, but Customer may not unbundle the component parts of the Software
for use on different Computers.

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

How to print from windows 7 pc on time capsule network?

I added a new pc with windows 7 on my time capsule network. Existing network includes 2 macbook pros and 1 mac mini with boot camp and windows xp. I have been using the windows xp with bootcamp on the mac mini and printing from it for a couple years. We don't share files between the notebooks and mac mini, just internet access and printing. My bootcamp side got too full which is why I added the new windows pc (yuk) for my windows programs but I cannot figure out how to get the windows pc to recognize my printer connected to airport time capsule. I installed the printer software and drivers and connected it with usb and printed but when I connect the printer back to time capsule the pc doesn't see it. Also, I downloaded bonjour from apple site but still no go. Any help is appreciated. As you can probably tell, I only know enough to be dangerous. That's why I love my Macs, they just work!

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

Can i use time capsule as external hard drive for both mac and windows

I have a mac book pro, ipad and iphone and ipod and a windows pc
Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?

You cannot access the TC from iOS devices without a browser. eg filebrowser.
Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?
Yes, with the following proviso.. the TC is not able to back itself up.. so if you store files on the TC without backups one day you will discover all your files are gone because of a hard drive failure of the TC. TM also cannot backup TC.. so you will need to buy a proper backup software.
It is also much slower than a real NAS..
And windows can be a bit painful.. especially windows 8.. other versions should work if you spend the time getting everything set right.

Mapping fonts from Mac to Windows in CS4

What is the most efficient process to map fonts in multiple documents opened from Mac to Windows?
Currently we are working on 600+ documents that we need to convert to Windows from Mac. Every time we open a new document, the missing fonts dialog comes up. We replace the fonts. However, it appears there's no provision to automatically do this for every new opened document without manually going through this process each time!
Couldn't find any reference to this issue in Help, KB, forum. Any ideas would be greatly appreciated.

OK guys, here's where we are now: apparently there's no way to batch process multiple documents without going each time through the "missing fonts" dialog. However, we were able to make this process as short as possible by using "load character styles" for each document when opened.
And it's possible to do this across the network.
Going through "load character styles" and synchronizing two documents [the saved one and the latest opened one], we are able to at least map the fonts consistently from doc to doc. This operation is still time consuming, especially considering the large number of docs we have to process.
I'm going to look into the scripting option if there's a way to automate this process.
The same synchronization process could be done by using the "book" option. But that involves again manually adding documents to the book one-by-one.

Trouble printing from mac to windows printer

I purchased my first mac last weekend and successfully set it up on my home network which is shared with my windows xp desktop. My HP deskjet printer is shared on the network through my desktop windows pc (not on a separate printer router). My mac recognizes the printer on the network but it prints meaningless garb when I ask it to print a document. Any suggestions to rectify my printing problem???
iBook G4 Mac OS X (10.4.3)

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

Calibrating Color in Windows XP to view PDFs from a Mac

This topic could be best suited in the "Acrobat for Windows" forum but I thought I would share this in the "Acrobat for Mac" forum since other Mac-based designers may have encountered my issue.
I have a customer in another city and all of their staff, who work with me, use Windows XP on Dell desktops with Dell LCD flat displays.
Four the past four years they have been happy with reviewing my designs as Review PDFs, exported from InDesign CS, CS2 and CS3, and initiated for review and comment with Acrobat 7 Professional. They have been satisfied with the color representation from viewing my PDFs on their screen, with free Adobe Reader, and they like the speed and cost cutting that results from not requiring a printed calibrated color proof to sign off on before going to press. When I export to PDF from InDesign, I make my Destination Profile "U.S. Web Coated (SWOP) v2" and I include the Destination Profile.
Then I designed a poster for them that was mostly teal (a color between green and blue. They saw the color as medium blue on their screens and approved job to go to press. They were disappointed to find the final printed pieces looking teal.
I know there is expensive third party calibration software out there but is there adequate color calibration for my non-technical customers using Windows XP on Dell LCD Displays?
I use Apple CRT Displays an I use the OS X System Preferences/Displays dialog to set my color temperature to 65000 and my Gamma to 1.8 and then I use the slider controls to adjust for the ambient light in my office. The color I see on my monitor is the same color I get when my design projects come off the printing presses.
Does Windows XP have software monitor controls to give the Dell workstations basic generic color calibration? Does XP let the user adjust the color temperature and Gamma settings?

This topic could be best suited in the "Acrobat for Windows" forum but I thought I would share this in the "Acrobat for Mac" forum since other Mac-based designers may have encountered my issue.
I have a customer in another city and all of their staff, who work with me, use Windows XP on Dell desktops with Dell LCD flat displays.
Four the past four years they have been happy with reviewing my designs as Review PDFs, exported from InDesign CS, CS2 and CS3, and initiated for review and comment with Acrobat 7 Professional. They have been satisfied with the color representation from viewing my PDFs on their screen, with free Adobe Reader, and they like the speed and cost cutting that results from not requiring a printed calibrated color proof to sign off on before going to press. When I export to PDF from InDesign, I make my Destination Profile "U.S. Web Coated (SWOP) v2" and I include the Destination Profile.
Then I designed a poster for them that was mostly teal (a color between green and blue. They saw the color as medium blue on their screens and approved job to go to press. They were disappointed to find the final printed pieces looking teal.
I know there is expensive third party calibration software out there but is there adequate color calibration for my non-technical customers using Windows XP on Dell LCD Displays?
I use Apple CRT Displays an I use the OS X System Preferences/Displays dialog to set my color temperature to 65000 and my Gamma to 1.8 and then I use the slider controls to adjust for the ambient light in my office. The color I see on my monitor is the same color I get when my design projects come off the printing presses.
Does Windows XP have software monitor controls to give the Dell workstations basic generic color calibration? Does XP let the user adjust the color temperature and Gamma settings?

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

I am trying to burn a dvd. I created it on Imovie shared it to Idvd and am trying to burn it on a memorex dvd-r from my mac os x laptop. Each time it attempts to bunr and then ejects it early. Usually near the end. Please help.

You will get better results if you use the Share ➙ Media Browser menu option and then drag the movie from the Movies pane of the Media Browser in iDVD onto the menu window.
Also I suggest you use this workflow which I learned from Bengt:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I have just bought a new mac book, and I want to start from scratch by syncing the content of my iPhone, but each time I try it wants to delete everything on the iPhone and replace by what on the new iTunes library, i.e. nothing! can I do the reverse?

I have just bought a new mac book, and I want to start from scratch by syncing the content of my iPhone, but each time I try it wants to delete everything on the iPhone and replace by what's on the new iTunes library, i.e. nothing! can I do the reverse, i.e. importing all my iphone's stuff on the new computer?

You need to copy some files and your iTunes folder to the new computer. Do you have a backup of your old computer (or still have the old computer?) Was the old computer a Mac or PC?
MacWorld - Move an iTunes library from a Windows PC to a Mac
Back up your iTunes library by copying to an external hard drive
iTunes- How to move your music to a new computer

Mac vs Windows - cost of lost time from viruses, spyware, adware

Similar Messages

Maybe you are looking for