Mac won't start blinking folder with ?

Hello have a question, my mac won t start, it appears a folder with a ? Inside....can anybody help me.....

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Similar Messages

  • MacBook won't start, shows folder with question mark. Hard drive fried?

    Last night, my MacBook was loading the contents of a message board in Firefox. Someone had apparently uploaded 20 mb photos, or something, because my Mac practically froze trying to render the webpage. I left my Mac running for perhaps 45 minutes. When I came back, I noticed the fans were whirring very loudly, and that the bottom of the MacBook (I'm guessing where the hard drive is located) was very hot. When Force Quit didn't work, I decided to manually shut down the computer by pushing the power button. When I turned it back on the computer made high pitch screching sounds (perhaps from the hard drive) and the computer wouldn't start up, only showing a folder with a question mark?
    Is my MacBook fried? I have five years' worth of very important pictures, not to mention all of my other files, stored there and nowhere else. Do you think I can get the files back?

    If you see a flashing question mark when you start your Mac, it's probably because it can't find the system software it needs to start up. Usually, all you have to do to get your Mac back up and running is remind it where its software is.
    See if this helps: http://support.apple.com/kb/ts1440
    Also, please backup your data regardless so if you can't retrieve it from the internal hard drive, you don't lose years of info

  • MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    MacBook Pro won't boot at start.  I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

    Read this article...
    http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

  • Mac doesn't boot from start volume - blinking folder with question mark

    Hi,
    my iMac with Snow Leopard 10.6.6 issn't booting anymore from the Hard Drive. It shows a blinking folder with a question mark. After starting, before the folder appears, I hear a two or three times "clack" sound with a following silent speed down of a fan.
    So I started from the installation DVD. On the "Choose Startup Disk" Menu there appears only the DVD and network. In Terminal by using "df" i only see my external Hard Disk, the DVD, and some /private/var folders. By listing the "/Volumes" directory only the external disk and the DVD appear.
    I tried to restore a Time Machine backup from the external disk. After choosing the backup in the dialog "Select for Destination" it says "Searching for disks" but it doesn't find any after waiting some minutes. It also shows "This disk does not have enough space to restore your system" but there issn't any disk selected.
    For me it looks like the Hard Drive with my system is dead. Does anybody has another idea what I can try?

    unfortunately I can't start the single user mode. It is always booting from the installation DVD. I tried mouse clicked at boot to eject it, but it doesn't work. Also I can't come to the Startup Volume menu by holding the option key. I always come to the installation menu. There I can't eject the disk from Disk Utility, because it is working on it. I also can't eject it using the eject key on the keyboard in the Startup Disk menu. From the Terminal I can't access my Hard Disk from /Volumes and therefore also can't access my user's home directory.

  • Mac stuck at white screen later shows blinking folder with question mark

    Today for some reason my mac froze and I had to manually start it back up. After I started it back up it was stuck at a white screen and later on a blinking folder with a question mark came up. I've tried using shortcut keys on startup but none of them are working. it just keeps on showing the white screen and later on the blinking folder with the question mark. Is it just a problem with the HDD that's supposed to read the HD? Or is my HD the problem and I lost all my data?
    MacBook Pro
    Late 2012 model
    15 Inch

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My computer has a blinking folder with question mark on it at start... What is going on?

    My computer has a blinking folder with question mark on it at start... What is going on?

    The hatter wrote:
    also that the default is no longer set  asin when someone had windows as default and removed it w/o changing Startup Disk panel.
    Oh yes, I forgot that people still do that

  • Macbook acting up on start-up: blinking folder with question mark?

    Last night, I inserted a DVD into my macbook, and as I was adjusting the volume, it seemed to have frozen. I tried to quit the DVD player, and then tried to shut down with no success, so I held the power button to power off. Upon start-up, my computer made clicking sounds, then proceeded to a screen with a blinking folder with a question mark on it. Nothing happened, and the computer wouldn't start up. I shut down and started up multiple times with the same result. Eventually, I was tired and just shut it off to go to bed. In the morning, my computer started up as usual. Later in the day, the startup with the blinking folder with a question mark and and the clicking sounds returned. I turned my computer off and let it sit for a little bit, then started up again. The computer started up as normal. So while I'm thankful that my computer is still starting up, I would like to know what the folder means, and what I should do about it? I have been planning on getting a new computer at the end of this school year, in June, so I want to make this macbook last until then. Please help! Thank you!

    Unfortunately, the clicking sound may be the "click of death." That is, the hard drive may be failing. Open up Disk Utility, which is located in Applications -> Utilities. Click on the hard drive on the left side. On the bottom of the screen you should see S.M.A.R.T. Status. Does that say verified or failing? Back up your data ASAP regardless.
    Is the DVD still in the drive? If so, eject it and see if it persists.
    As for what the blinking question mark, it means that no device with a system to startup from was detected.

  • My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    Have you just tried repairing with Disk Utility?
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • I Mac won't start -- we get apple logo with spinning wheel, question mark that disappears and then a blank blue screen

    My daughter's old I Mac won't start. It is not backed up.  We want to get some things off of it if we can.  
    When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen.  Is there any hope of getting this to work?  This computer is out of warranty.  Does it seem that if we reinstall the Operating System we might find old data?  

    First try restarting with the original install disc an run Disk Utility to repair the drive. If you have to re install the OS make sure you select archive and install or else everything will be lost.

  • Blinking folder with question mark and a new hard drive: also installing Mountain Lion and 0 with a line through it appears please help?

    Okay so my harddrive failed in my 13" Macbook I used to have a WD scorpio black 250 gb for a while. I upgraded to a WD scorpio black 500 gb 7500 rpm hard drive. Okay so I installed the harddrive and ran my friends startup disc to learn that grey face discs are specific to that computer. The start up disc ran fine (minus the error stating it could not install OSX because its specific to another computer) and I looked in disc utility after installing the new harddrive and it said verified. I lost my startup disc and did not have another one. Using a friends mac I created a bootable USB drive with mountain lion on it, I plug it in and it comes up and when I choose to start up on the harddrive a 0 with a line going throguh it appears. If I do not start up with the USB or my friends startup disc then a blinking folder with a question mark appears. So my question is what could the problem be if a startup disc runs on a new WD harddrive and says under disc utility that its verified but the 0 with a line through it appears after I try to boot it with a flash drive containing mountain lion? WHats the issue here im completely lost now

    Sounds like some sort of power issue and now your drive is not working.
    You'll have to take this to Apple for repair.
    You should read this if you don't have recent backups of your data off the machine.
    My computer is not working, is my personal data lost?

  • Blinking folder with question mark what does it mean?

    Okay so my harddrive failed in my 13" Macbook I used to have a WD scorpio black 250 gb for a while. I upgraded to a WD scorpio black 500 gb 7500 rpm hard drive. Okay so I installed the harddrive and ran my friends startup disc to learn that grey face discs are specific to that computer. The start up disc ran fine (minus the error stating it could not install OSX because its specific to another computer) and I looked in disc utility after installing the new harddrive and it said verified. I lost my startup disc and did not have another one. Using a friends mac I created a bootable USB drive with mountain lion on it, I plug it in and it comes up and when I choose to start up on the harddrive a 0 with a line going throguh it appears. If I do not start up with the USB or my friends startup disc then a blinking folder with a question mark appears. So my question is what could the problem be if a startup disc runs on a new WD harddrive and says under disc utility that its verified but the 0 with a line through it appears after I try to boot it with a flash drive containing mountain lion? WHats the issue here im completely lost now
    MacBook

    Use the instructions in this Apple article to help troubleshoot your issue.
    Best of luck.

  • Blinking folder with a question mark

    I just bought a 2008  MacBook and all as sudden it starts showing a blinking folder with a question mark in it. Anyway to fix this?

    The question mark on a blinking folder is to tell you there is no Operating System on the computer. Since this is a 2008 MB it can run Snow Leopard (operating system 10.6). You can buy a copy here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    If the MB can be upgraded further you can buy more recent OS from the App Store.

  • Blinking folder with a question mark at startup.

    Dear all.
    I am a newby with Macs and I just found an iMac G3 266Mhz. (Why anybody would throw a Mac away is beyond me but anyhow)
    When starting up I just get a blinking folder with the question mark.
    I can start up with an CD of Mac OS 9.2 but when wanting to install the software I get an error message about my firmware not being up to date etc etc... when going through the things I have to do for an firmware upgrade I get an error message saying disk locked....By browsing through these pages I found that that was most likely due to starting up from the CD.
    But now I'm not able to start up from any other folder then the CD.
    If I select to start up from the hard disk I just get the folder icon with the question mark again.
    Please please please can anyone help me....or I am doomed to using PC´s forever.
    Irol

    Hi Irol
    You're in a sort of catch 22 situation. You have to run the firmware upgrade while running from the HD.
    Anyway. Try this
    Start up from the CD as you did before then copy the firmware update app onto your hard drive .
    While running from the CD open the HD and look for the "System Folder"
    What does it look like? Is it a plain folder or is it a folder with the picasso face?
    It should have the picasso face.
    If it's a plain folder do this.
    Open it and locate a file called "System" - it will have the picasso face. Drag the file out of the system folder onto your desktop.
    Now close the system folder.
    Now with one swift action - drag the picasso file and drop it onto the closed system folder - do it quickly so that the folder doesn't open. Then wait a moment.
    The picasso face should appear on the systgem folder. Now try starting the mac normally.
    Does it work?
    If so, run the firmware updater. There are two versions, one for a tray loader and one for the slot loader. It you get the wrong one it will tell you, It will also tell you if the firmware is up to date.
    Anyway, if you can't start the mac other than from the CD it is most likely that there is some corruption on the disk. A good tool to use is Diskwarrior - it's a bit expensive but it's a staple of my toolkit - it's far more efficient than both Norton and Techtool.
    Another alternative - but probably more difficult. is to run from an 8.6 or 9.0 CD if you can find one - ebay?
    Just to say - the flashing question mark is the system's way of saying "I cannot find a valid start-up folder"
    Hopefully one of the above will get you going.
    The fact that you can start the mac up from the CD says that the mac itself is OK - I wonder if it was thrown away because the owner couldn't sort it out.

  • Blinking folder with question mark after doing update

    I just upgraded a Mac from Leopard to Snow Leopard. Next, I downloaded and installed the most recent Snow Leopard updates to bring it to 10.6.8
    After installing the update there was a period of time where nothing was onscreen and than a blinking folder with a question mark appeared.
    I cut the power and rebooted and it seems to be working ok.
    1. Is there some damage done to the installation? Should I reformat and start over? I just do not want it to cause a problem later on when I start doing work on it.
    Thanks.

    There is no System Folder in OS X. Here's what I would recommend doing now. Make sure that the normal startup volume is selected in Sys Prefs>Startup Disk. If it wasn't selected, this may be why you saw the blinking folder/question mark. 
    Download the 10.6.8 Combo update, boot to Safe Boot by holding the shift key down at the startup chime. Give it much longer to boot than a regular startup. A Safe Boot will, effectively, check and repair the Disk, if it is found necessary to repair it. Then install the 10.6.8 Combo, which may fill in any missing or corrupted files. Installing from Safe Boot, where most third party programs are disabled, reduces the chance of any incompatibiites with the update.
    You may want to have a look at my recommendations for updating.
    https://discussions.apple.com/thread/3139323?tstart=0

  • Blinking Folder with Question Mark after replacing Hard Drive

    I have a 2010 Macbook Pro. It recently stopped starting up.  I took it to the Genius Bar and the guy working there told me I needed to replace the hard drive.  I did that.  Now when I start the computer up I get a blinking folder with a question mark on it.
    I've tried holding Option to get to the Start Up Manager and I've tried holding Command+R to get to Recovery and both give me no results.
    I cannot find my original Installation Disc.
    Can anyone give me advice on what I should do next? Do I need to get another copy of the Install DVD to continue?

    Install Snow Leopard from the original discs that came with the computer. You cannot use a retail Snow Leopard DVD with that model. Update to 10.6.8. You can then redownload Lion or Mountain Lion freely if you have purchased them already.
    The first thing you must do is partition and format the drive before you can install OS X. To do that you will need an installer disc. You can purchase replacements from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You cannot use Internet Recovery unless you had Lion or Mountain Lion already installed. In that case see:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for