Macbook air suddenly doesnt turn on, gives 1 long beep every 5 seconds

I have been googling and found out there is something wrong with the RAM in my Macbook Air. Suddeny, without anything strange I did, my Macbook Air doesn't go on but stays black and gives a long single beep every 5 seconds. That is really all it does.
Does this really mean all I can do is go to an apple store and get a whole new board? 
I hope some of you have alternative answers :-). Many thanks!
What a great week, both my Ipad and Macbook Air are dying....

Please make a Genius Appointment and take it in for service. If there are no Apple Stores then call for an appointment or just take it in with you.

Similar Messages

  • MacBook Air won't turn on - it only hoots !

    My MacBook Air (2009/2010) will not turn on: when I press the power button there's a tinny little hooting sound  every 5 seconds, exactly in sync with the flashing power light - that's all - no sound of fans or anything, nothing to see on the black screen.  Any ideas ?  Thank you !
    FC234B/A RFB MACBOOK AIR 13.3 /2.13GHZ/2GB/12-GBR
    bought refurbished from Apple June 2010
    I have tried the following Apple Support advice :
    If your MacBook Air doesn’t turn on or start up
    Try the following suggestions in order until your computer turns on:
    Make sure the power adapter is plugged into the computer and into a functioning
    power outlet. Be sure to use the 45W MagSafe Power Adapter that came with your
    MacBook Air. If the power adapter stops charging and you don’t see the indicator
    light on the power adapter turn on when you plug in the power cord, try unplugging
    and replugging the power cord to reseat it.
    Check whether the battery needs to be recharged. If the light on the power adapter
    glows amber, the battery is charging. See “Running Your MacBook Air on Battery
    Power” on page 34.
    If the problem persists, return the computer to its factory settings by pressing the left
    Shift key, left Option (alt) key, left Control key, and the power (®) button
    simultaneously for five seconds.
    Press and release the power (®) button and immediately hold down the Command
    (x), Option, P, and R keys simultaneously until you hear the startup sound a second
    time. This resets the parameter RAM (PRAM).
    Resetting the System Management Controller (SMC)
    on Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

    thank you - it's just one tone, which lasts half a second (every five seconds) - and with exactly the same timing, a single pulsing flash of the white power light comes on and goes off..

  • My macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..

    my macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..i tried to open the macbook air again but nothing happened.. no fans, no chimes, no light in the laptop showed..what should i do? please help..thank you

    Welcome to Apple Support Communities
    A green light means that your battery is full or that it can't be detected. If you can't start up the Mac, probably your logic board or battery aren't working.
    Take the MacBook to an Apple Store or reseller to get your battery or logic board replaced. If the MacBook is in warranty, this repair will be free

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Macbook air suddenly running slow. Closed all applications, rebooted, doesn't solve the problem.  Any ideas?

    macbook air suddenly running slow. Closed all applications, rebooted, doesn't solve the problem.  Any ideas?

    It's very likely that your boot drive is failing. Back up all data immediately and schedule a "Genius" appointment at an Apple Store.

  • My brand new MacBook Air won't turn on all the way.

    Hi my brand new MacBook Air won't turn on all the way. If I try to restart it or shut it down, it will go like it is starting up, but goes to a gray screen and stays there. I can see the mouse and move it, but it won't turn all the way on. What is wrong with it? It had been working fine since I got it, but today it hasn't been.

    You may have to see if troubleshooting this issue can help, though the instructions on a process of elimination by symptoms are tedious in the following support article, and are suggested to be performed ahead of trying the process described in the title.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    For the actual SMC reset, note subsection in above, instructions click-open on blue text:
    >Resetting the SMC on portables with a battery you should not remove on your own
    If the computer does not shut down, and just hangs there, try pressing the power button down for 15 seconds. Check the suggestions in the above article to see if any of them can be used, if the computer will power-up.
    There is another item that sometimes can help, but the main issue you say could be resolved by the SMC reset; this other thing is involved NVRAM (non-volatile random access memory) so here's an article about it.
    •About NVRAM and PRAM:
    http://support.apple.com/kb/HT1379
    >Resetting NVRAM/PRAM opens in above, click-to-see instructions on how to reset.
    You may have to call ahead to the nearest Apple Store for an appointment to see a Genius; or at authorized reseller, their service product specialist who should be trained to understand how to proceed, just in case there is a hardware issue behind the symptoms. When you call, be sure to have the serial number and purchase date available, when you call an official store.
    Or use the 'Apple - Support - Contact Apple Support' to start the process...
    http://www.apple.com/support/contact/
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • My macbook air won't turn on and doesn't charge?

    my macbook air won't turn on when it is plugged in.  The light on the connection is orange, not the usual green.

    Orange means charging.
    Keep it plugged in for a while.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    For more on this:
    http://support.apple.com/kb/TS1365

  • MacBook AIR won't TURN ON!!

    My MacBook Air Doesn't turn on. I did everything already, pushing the shift+ctrl+option etc. 5 seconds 10 seconds etc. still no power, there is a green light on the charger but no light or sound coming from the macbook air. This is like only a month old, so there is still warranty. the problem is I have "very important documents" in my macbook air and how would i get assurance that the files won't be corrupted, used, or lost?

    Guys! I HAVE THE SOLUTION!
    I hope everyone with the same problem read this!
    I posted my macbook AIR won't turn on.
    I coulding risk bringing it to MAC Store and leave it there because I have PRIVATE FILES.
    I tried almost every other options, instructions in youtube etc. but nothing worked.
    but now it WORKS
    All i did was plug it for 24 hours straight. Tried turning it ON again but wouldn't work..
    I left it in my room for about 1-2weeks, thinking it was hopeless.
    one day I pressed the power button again THEN it came back to LIFE!!
    So guys dont lose hope. Try resting it for a few days then try again.
    hope this helps

  • My macbook air will not turn on and it has been charging all night? What to do?

    My Macbook Air will not turn on this morning after charging all night, what can I do to start it?

    Check the adapter >  Apple Portables: Troubleshooting MagSafe adapters
    And try a different electrical outlet.

  • My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

    My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My late 2010 macbook air suddenly crashes, show a blue screen and restart. What can i do to solve the problem?

    My late 2010 macbook air, suddenly shows a blue screen and restart. I´m tired of loosing my job. Someone can help me?

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • My macbook air won't turn on and has a beeping sound. Any suggestions?

    My macbook air won't turn on and when the power button is pushed, it makes a beeping noise. Any suggestions?

    Beeps on startup:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images.
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT2538

  • My MacBook Air was being turned on and overheating itself

    Hello, users
    Today I found my MacBook air was being turned on and heating itself even if I haven't used it since last night.
    I noticed When I tried to use it and put it out from my backpack and I felt weird because my MacBook in the cotten pouch was really hot.
    My MacBook was pulled out immediately, horribly, it was too hot to hold it and I was really surprised!
    As soon as I opened the my Mac, it displayed a cursor shotly and it automatically turned off and after that the fan stopped spinning as well.
    I just got back home and connected with the power supplier, it had only 0% battery.
    This is all I can explain from the beginning to now on.
    This is the first time I have experienced this kind of situation.
    I think I turned off well after using it yesterday and it wasn't heating in this morning.
    I have no idea at all but I guess it would be recent update 2 days ago.
    I don't want to imagine the following event if I didn't check it out before it had gone forever.
    Do I need to check the condition of my MacBook Air all the time?
    Is there any method to prevent this problem?
    By the way, My Mac OS X version is now 10.7.5

    Welcome to Apple Discussions
    Unplug the mouse then try an SMC reset.

  • MOVED: NO POST LONG BEEP every 8 SEC

    This topic has been moved to Retired motherboards.
    https://forum-en.msi.com/index.php?topic=113158.0

    Ok,
    Posted on wrong forum earlier I think, but having an issue posting.  Getting 1 Long beep every 7-8 seconds.  Started directly after I tried overclocking video and processor... IMMEDIATELY after.   
    STEPS I took in trying to resolve this issue..
    1. Tried resetting cmos by pulling battery and changing pins.  Did this in a bunch of different ways, and even had battery out all night.
    2. Put a New stick of RAM in there.  Still no change
    3. Changed video card.. still no change. 
    4. Unplugged and replugged everything in computer making sure everything has a good connection.  No change
    5. Held down insert key while booting up.  It doesn't beep, but nothing shows on the screen and after I let go of insert button it starts beeping again.  (Not sure how long to hold down insert, but did it for atleast 5 min) 
    I think I've listed everything I've done.  Some say it might be the power supply.  Which if changing some settings would make the PSU bad or ruin anything, that might be it.   Could it be the CPU got fried? 
    ANY feedback would be wonderful!  Been on this issue for 48 hrs now. 
    Thanks
     

  • Have anybody experienced a frog like sounds that keeps burping on macbook? Its a very annoying sounds that burping every seconds.

    Have anybody experienced a frog like sounds that keeps burping on macbook? Its a very annoying sounds that burping every seconds.

    Did you ever find a solution to this problem because I have it too. I have gotten used to it when listening to movies etc., although it can startle me, but I find it very irritating when I am trying to record something off my computer, like a quiet meditation, onto a voice memo, and this happens…I have to start over and hope it doesn't keep happening.

Maybe you are looking for