Macbook Pro 2,33Ghz Core 2 Duo Radeon X1600, it has been presentng screen artifacts since a year ago. It is not in warranty now, but I read in the web that plenty of people is having the same problem as an early degradation issue. Solution?
Macbook Pro 2,33Ghz Core 2 Duo Radeon X1600, it has been presentng screen artifacts since a year ago. It is not in warranty now, but I read in the web that plenty of people is having the same problem as an early degradation issue. Sometimes the system freezes and stops respondign so I have to restart and lose all the unsaved work. A few moths ago, the Superdrive stopped recognizing the disc because of a firmware update released by Apple!! It is not acceptable. Solution?
Apple should give a solution to all these people who spent more than 2500$ in a laptop that has stopped working in less than 3 years!
http://reviews.cnet.com/8301-13727_7-10330060-263.html
Yes, it appears the X1600 has more than its fair share of issues. I've seen reports of people reflowing the solder joints on/around the GPU with success, even baking the LB in the oven.
The rest is something you'll have to take up with Apple.
Similar Messages
-
Windows 7 RC Build 7100: No Audio on MacBook Pro 1,1 (Core Duo)
On Thursday, I installed the brand new Windows 7 RC Build 7100 on my MacBook Pro 1,1 (Core Duo). This version of Windows seems to be zippy and far more polished than Vista: boot time is much, much faster. So my main problem is this: I can't get sound to work at all. In the Device Manager, the audio device is banged out and shows as a "High Definition Audio Device" rather than AC'97 or whatever it's supposed to be. If I check the properties, under status it says, "The device cannot start. (Code 10)". I've tried to installing the drivers from RealTek about a zillion times, the Boot Camp drivers from the Leopard install disc and I've run all the little setup programs as Administrator and in Vista compatibility mode, but no luck. Has anyone else had any luck in getting the Windows 7 (7100) to run on an early model MacBook Pro with working audio? Thanks!
Can't speak for MacBook, but for the desktop Mac Pro, the audio issue with Windows 7 install on boot camp is a known issue. You probably need to install the Realtek driver from your leopard install disk. It worked for me. Fixed the audio in about 5 minutes.
Try this:
while running windows 7
Insert 10.5.4 or later Leopard disk
Go to Boot camp folder
Locate the Realtek driver .exe file
Run it, it's an installer file
Restart.
Fixed my problem, similar to yours.
Mike -
I have a MacBook Pro with Intel Core Duo and Snow Leopard 10.6.8. Would like to upgrade to Lion but it requires a minimum of Intel Core 2 Duo. Can I get what I need or do I have to buy new MacBok Pro?
I also have a core duo MBP with Snow Leopard and it runs perfectly. There are very few things it cannot do as compared to the faster, newer MBPs, but that is attributable to the CPU, not the OS. There are some who view Lion as downgrade rather than as an improvement. If there are important applications that reqire a fast CPU or Lion features that you find essential, by all means get a new MBP.
I have an aphorism: Obsolescence is more often a perception rather than a reality. Besides the silver keys look much classier than the black ones.
Ciao. -
macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
My Macbook Pro is 3 months old and recently it has been making quite a loud fan noise whenever i play music/video or even turning up the volume. I haven't been playing music/ video for ages. Is there any solution?
Try resetting the SMC http://support.apple.com/kb/HT3964
-
I have always heard that Macs are less likely to get infected with a virus. My computer has been running much slower since I installed Maverick. Just not sure what the problem might be. Is there a way for me to run a diagnosis?
Some have found relief just by reinstalling, but it is more than likely incompatible third-party applications that slow it down.
You will have to investigate to see what it is.
Open Activity Monitor and see if anything is using a lot of CPU% or Memory. If they are, check to see if there is an update for them.
Another place to look is the Console. See if anything is logging repeating messages with throttling and/or respawn in the All Messages list.
Sometimes it is not that easy to root out the problems, but if you have anything that purported to clean, protect, optimize, maintain, or flush your system, then that is likely the cause. -
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
Please help.
Your macbook pro has a 32 bit processor and not a 64 bit processor?
If so, i believe photoshop cs5 is the newest photoshop version that will work on your Macbook Pro.
System requirements | Photoshop
You can get a 30 day trial trial version of photoshop cs5 from here:
http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Also, photoshop cs through cs4 should work as well, but cs3, cs4 and cs5 will run better since cs and cs2 require Rosetta and can be kinda slow at times. -
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
Is there any software that i can download from the web to fix my phone? i bought it off the streets and the software and driver must have been deleted cause i can only get the itunes logo and i cant restore it.
There is no driver software on the iPhone that anyone can remove, per se. Why can't you restore? Is the iPhone not recognized in iTunes? If not, see:
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/HT1808
Otherwise, please post back with details about the problem and someone can probably provide further suggestions.
Regards. -
Macbook Pro 1.83ghz Core Duo - Boot Disks
Hello. I have misplaced my startup disk. Any chance I could paypal someone some money in order to get a burned copy mailed to me? The apple store doesn't have any.
Thanks!
TomCall Apple tech support. They can send you a set for a reasonable fee.
-
for a week i am expecting from apple to solve or comment or give a solution but guess like my iphone, apple also become dummy, guess apple is going to loose brand
I had the prob all good now follow the. Initial response of the fix i removed all network setting for wifi close the phone and redone them sll good now for 6.01 since then on all upgrage im golden. Just check fix at start on issue
-
Thanks for any suggestions!
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(91987) -
I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
(99115) -
Most people are having the same problem
looks like most people are having the same problem. either no music will go onto their ipod or it says it has transfered and nothing actually has, only to get some annoying message with (-69) in it. does anyone know how to fix this, or why this happens?
This is how my troubles started, when i upgraded to itunes 5 a while ago. Songs would freeze when loading to ipod and soon i started getting error -69 and ipod became unresponsive. Then it totally effed up, not being recognised by windows, not mounting or restoring and all the songs on it wont play at all. Took it in to the store where i bought it and they told me that my hard drive died. Ah now i wait while it gets repaired. So all these errors are a sign that your ipod will soon be useless. Oh yeah for the -69 i found that getting rid of the songs that it froze on worked pretty well, something to with checksum or md5 something.
Maybe you are looking for
-
Mac Mini wont start after power outage, and problem copying iPhoto library. HELP!
So, recently there was a power outage in my neighborhood, the power was intermitent for about 2 hours, during this time my mac rebooted itself several times, but on the second time it rebooted the power went out during boot, then the power finall
-
Time Capsule won't recognize my USB hard drive.
I have a 160-gb Western Digital hard drive in an external enclosure that I use to use on my PC. I want to access the drive via Time Capsule through the USB port in the pack. Currently I have a USB hub with a printer and the hard drive plugged into th
-
JMS queue problem integrating with TIBCO
Hi all! We have several communication channels between XI 3.0 (SP21) and TIBCO via JMS queues. All of them are working fine except one. This problem only happens in development and quality systems with SP21, production has SP17 and doesn't have this
-
Hello, I have a new error message, when I am trying to digitize Betacam footage via my Kona LHe card It reads "Tape Trouble. Check VTR. Do not attempt to eject tape or use transport without checking VTR first." Then an OK button The UVW-1600 keeps pl
-
photoshop CS6 extended downloaded after that the 3D not show on tool bar??