MacBook Pro 2009 - Window 7 - Low Volume Output

I am experiencing low volume output on the internal speakers and slightly better volume on headphone output under BootCamp with Windows 7 x64 Ultimate. And of course the red light emitting diode is one constantly in the audio output jack.
I have seen fixes for the Windows XP folks over time and on my older MacBook (2006) with Vista x64, I found a fix. I have seen some thoughts on installing RealTek HD Audio drivers and that DID NOT work for Windows 7 x64 on my MacBook Pro 2009. I also tried reinstalling the CirrusAudio x64 from the BootCamp 3 drivers on my Snow Leopard DVD.
So I am left wondering if a driver update is forthcoming or if there is a fix that has been discovered and not reported online yet?

I'm going to leave this message for reference to other users...
As of October 22 2009 there is no known fix for the broken Cirrus Logic driver that comes with Bootcamp 3.0 under any 64bit Windows OS (including Windows 7 and Vista).
Apple seriously ***** for not doing anything about this for MONTHS and has lost a customer forever. I was going to get a 17in to complement my 13in MacBook Pro but this kind of driver issues is just plain unacceptable, and goes to show how you can't rely on a company like Apple for mission critical systems, period.
If they want to make ANY inroad in the corporate world the better get their stuff together and start delivering, the famous "excellent customer experience" for me is nowhere to be found. Lacking that, mac computers are only pretty although non-functional machines.
Sorry for the rant... I hope somebody from apple listens, but I doubt it.

Similar Messages

  • Bootcamp MacBook Pro 2009 Windows 8.1

    Hey Guys
    I have a MacBook Pro 2009 which has Mavericks installed. I did have Windows 7 installed also but did a complete upgrade to 8 then to 8.1.
    The problem I am having is that I can not install the Bootcamp software at all be it version 4.0.xxxx, 4.1.xxxx, 5.x.xxx or 5.1.xxx.
    Every single time I try to install it, I get an error message saying "Bootcamp requires that your computer is running Windows 7"
    Any suggestions/help would be greatly appreciated as this is driving me nuts
    Thanks Guys
    Huza

    Hello there, Tonicost.
    The following Knoweldge Base article offers up some great and practical information to properly setup Bootcamp on your MacBook:
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/ht1461
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Can I install only Windows on my Macbook Pro 2009?

    Hello All,
    For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
    I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
    I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
    However, my question is - will this work?
    Thanks
    Craig

    As TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp.  BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere).  Virtualization runs in OS X, so that should be a non-issue.  Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
    BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X.

  • Why is the volume on my MacBook Pro suddenly so low?

    The volume on my macbook pro is really low.  It used to be much better, now I can hardly hear people when on skype or listening to music... everything is set on high volume... help!?!

    Try:
    Reboot into Safe Mode then reboot normally. Safe mode takes longer to boot than booting regularly. That is normal.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • Troubleshoot Sound output for Macbook Pro 2009

    macbook pro 2009 Sound output choice does not drop down anything but "internal speakers" choice. HDMI cable streams video and no sound. Have swapped out HDMI and it recognizes no sound for either. I think it could be a faulty adaptor for HDMI cable connection? It used to work fine then it stopped working and gave me a planet screen on TV when video was playing fine on computer. I tried again after software updates and a new hard drive and now it streams the video but sound only comes out of internal speakers. Wondering if I could be missing something on my mac before I buy another adaptor.

    Another option, if you need a multi-channel sound support is to use a Optical cable like -
    http://www.monoprice.com/Product?c_id=102&cp_id=10229&cs_id=1022902&p_id=1557&se q=1&format=2
    From MacBook Pro (13-inch, Mid 2009) - Technical Specifications (all the other Macs from 2009 also support optical digital audio).
    Audio
    Built-in stereo speakers
    Built-in omnidirectional microphone
    Combined optical digital output/headphone out (user-selectable analog audio line in)
    Supports Apple Stereo Headset with microphone

  • I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present.  Need help?

    I have a 13 inch MacBook Pro (2009).  Recently I bought an extended hard drive because I had used up the memory on my iDisk.  As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down.  Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display.  Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains.  I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this.  I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro.  So could someone on here please help me?  It would be greatly appreciated & I thank you in advance!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)

    bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • How do i updates itunes on a macbook pro 2009 10.5.8 to newer 10.6.8

    Hey guys i hope someone can help me. I recenlty brought an older model macbook pro 2009 with itunes 10.5.8 on it. for a great low price of $ 300 dollars. How ever i cant update a newer version of itunes to replace the 10.5.8. So everytime I plug my new ipad into the older mac it says i need itunes 10.6.8 or higher. how do i update to a newer version for free???? youtube was not helpful or goole. So  I am stuck.

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • MacBook Pro 2009 new hard drive install results in very slow function and freezing

    I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
    Short version:
    I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
    Long version:
    Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
    Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
    I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

    If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
    http://scsc-online.com/Scannerz.html
    I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
    Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
    I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
    In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

  • Does anyone know what SSD will work well/best in a Macbook Pro 2009 13.3inch 2.25 core2duo laptop

    I am looking for advice on the best solid-state drive (SSD) for MacBook Pro 2009. I heard that only a few work well since there is a problem with the Nvidia chip working correctly with SSD's on these particular MBP models. I tried an Intel 520 series SSD and I was getting the "beachball" effect every 20 seconds because of the 1.5 negotiated speed link so I returned it to the store. Has anyone found a good SSD that wont give me the low negotiated speed link/ constant beachball effect?
    Any help is greatly greatly appreciated, I've been trying to find a good SSD for months now but worry that I will buy one that it wont work well with my MBP like the Intel 520 series did.
    Thanks again.
    Using Macbook Pro 2009 13.3inch 2.26 Core2Duo, 4GB of Crucial RAM if that means anything.

    You should be able to get 3.0 Gbps from your hard drive bay interface. Not sure why the Intel didn't work for you - but I wouldn't 'buy down' to a 3.0 Gbps SSD (some sold by Crucial and OWC, just to name two): get the fastest that you can so that if you upgrade your machine in the future, your SSD can travel with you.
    I've had good luck with the Crucial m2 series - I've one of the 512GB models and it's worked well for me and has good Mac support. They're not the absolute fastest on the market, but they're good and solid.
    For more information and a 'buyer's guide' see here.
    Clinton

  • How do I hear audio from my Macbook Pro 2009 to my LED TV?

    I recently received an adapter for my Macbook Pro 2009, Mini DisplayPort (Mini DP) to HDMI Female Adapter + HDMI Cable for my birthday.  I knew before receiving this adapter I needed something to transmit audio to my TV.  However, th 1/8' (3.5mm) to RCA stereo audio cable I purchased does not work. Does anyone have a suggestion on which cable I need to purchase next to make the sound component work when connecting my laptop to my Toshiba LED TV?

    The Mac's audio output doubles as a optical Toslink stereo mini jack, just use a adapter to regular Toslink and plug the optical cable to your surround sound system. Fiddle with the sound settings to enable optical output.
    Mac's pass surround sound through, they don't do any processing.

  • Cannot play audio from macbook pro 2009 to tv using hdmi with adapter

    MacBook Pro 2009. I cannot get audio from my my macbook pro to tv using an hdmi adapter

    That is because the 2009 MBP does not support audio via the minidisplay port.  You will have to tap the audio output port for audio and use the RCA audio input connections on the TV.
    Ciao.

  • HT4796 I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac.

    I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac

    You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
    Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
    http://support.apple.com/kb/HT4718

  • Quickly runs out of battery on macbook pro 2009

    Hi! I have macbook pro 2009. Battery does not hold, quickly runs out of battery. I think, what trouble in battery and recently i replaced her. Problem continues. My mac can work no more than 2 hour. What to do?

    GolfStream585 wrote:
    Sorry, but where "Hardware" in menu ?
    You are in the wrong place.  Click on the Apple in the left corner on your desktop and then click "About This Mac."
    In the next window, click on the More Info button
    Your battery info as previously requested is what we need to see.

  • Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

    When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

Maybe you are looking for