Macbook Pro 2011, Graphic automatic switch - High Res, antiglare screen

I have had a hugh problem with my new macbook Pro, 2011 with High Res, Antiglare screen. The automatic Graphic switching causes the screen to flicker about every 10 seconds when the comuter gets hot. It happens whenever a graphic intents piece of software has been active for some time and I return to the desktop. After two attempts to repair the computer I have installed gfxCardstatus and turned off the systems own autoswitching. This has eliminated the problem. But I hope that Apple will come up with a software update, that will make its own OS capable of controlling the autoswitch for the High Res screen.

Hey andersand! Look, I don't have a definite solution for you but I do have a 3rd Party application that I use to manually switch between graphics cards! It's called GFXCardStatus and you can choose what graphics you want to use from a drop-down menu in your menu bar.
You're right to assume that the graphics switching would cause the flickering and not something else, and I think that using this software would at least reduce the amount of flickering that occurs.
Link here, http://codykrieger.com/gfxCardStatus and when you've installed it a tried it out, tell me if it improves at all. Good Luck!
(This was my first reply to any post ever!)

Similar Messages

3 week old Macbook Pro 2011 now has dot in middle of screen?

I bought my Macbook pro 2011 Hi-res 15" Glossy - Configured to Order 3 weeks ago from the Apple Online Store. After installing and playing a game this week, I notice that a grey dot appeared in the middle of the screen, especially noticeable when browsing on safari, with a white background.
Is this a dead pixel or stuck pixel? what should I do? What can Apple do?

Do you have access to an Apple Store? If so, take your Mac in for evaluation and ask. We are just fellow users, so we can't speak for Apple.
Pixel problems are a judgement call--Apple will determine what should be done on a case by case basis. If Apple determines that the display is unsatisfactory because of this flaw, you might possibly get a replacement display, especially since your problem is in the center.
Good luck!

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

Macbook Pro 15" with two 27"+ high res. monitor trough thunderbolt port

Hi all,
I just looking for a solution, to make it work: With a thunderbolt port MB Pro 15" (2011-eraly, 2011 late, 2012 mid NOT RETINA version), which has only one thunderbolt port. How its possible to plug two (min. 2560x1440) high resolution NOT APPLE Display (daisy chain). I got now one Dell 3011 and I plan to plug a second one. BUT how?
It is any HUB or something like that, which create from the one thunderbolt port »» two mini or standard diplay port, or dual DVI, so two separate connector which can handle the high resolution?
I saw lot of solution up to 1920x1200 (dualhead2go, etc.), but nowhere found any idea to handle with a MB Pro 15" thunderbolt version multiple (dual) external HIGH Resolution monitor 27-30" (2560x1440, or 2560x1600).

Try Googling "macbook pro thunderbolt dual display adapter" - there are a number of hits (even a YouTube video). See if you can find what might work best for you. I'm sure that someone around here has acheived this - they're jut not chiming in at the moment. Also check with OWC and see if they have anything. You can call them at 1.800.275.4576.
Good luck,
Clinton

Macbook pro 2011 Graphics Issue

Hi to all.
As all owners of 2011 macbook pro know, there is a common graphics card issue.
As there is no program to replace the logic board and i was not under warranty all i had to do is get it replaced from my pocket.
My question is: Is the new logic board revised regarding this problem or is the replacement still being carried out with this failure?
Regards.

" He said that some of boards that were made had bad thermal paste in them that over time (usually after the warrantee has run out) hardens/loses its gooeyness. "
From macman.gg:
" the original paste was hard and very spread out, unusual for Apple, will keep you informed"
and to Franzdm - This is a very simple fix and something that someone in your area should be able to do. At least in Florence. (Wished I was there right now!):
So it would appear that the base cause of this could be the thermal paste.
Bad thermal past could cause low heat transfer to the heat sink. Bad thermal paste is not unknown in the electronics industry.
This would cause the graphics chip to run hot causing video anomalies and eventually ball grid array failure which is catastrophic.
So everyone with these symptoms should check out their thermal paste or have it checked out.

Macbook Pro 2011 Fan cannot run higher than 1000 rpm

My MBP fan is making loud noises like something is jamming it so it has to work harder than usual to spin. Right now it is running at about 900 rpm according to smcFanControl. My temperature is ~60ºC (not sure if this relevant).
I have tried taking off the back cover and cleaning the dust off the fan with compressed air. This significantly lowered my temperature from ~70 ºC to ~50 ºC.
If more information is needed, please specify what and instruct me how to find them.

You don't mention which MacBook Pro you have, but in any case, if you look at the instructions for opening the system to replace the HDD/SSD then you should be able to see the cooling fans. Take a look and make sure they don't have a large dust build-up, and possibly even use a can of compressed air to clean them out a bit. I know that I need to do that with my system a couple times a year due to dog hair & dust build-up, but my fans never get as bad as yours seem.
If you are still under Apple Care, you might want to make an appointment at a Genius Bar and have them take a look at the system. If it is a bad fan, and you are still under Apple Care, they will fix/replace it for free.

MacBook Pro 2011 - 15" Core i7 - SSD - Heating, Screen Flickering Issues

Hello,
I recently brought MacBook Pro 2011 15" Anti-glare High Resolution with Core i7 2.2 G Hz, SSD, 8GB of RAM. I installed Microsoft Office and Angry Birds at this time. I'm facing multiple issues with my first Mac. Is anyone facing these kinds of issues in new MacBook Pro 15" models?
Issue 1: Heating: Fan running on high speed even though room temp is below 60F. No major applications are running at that time expect Office 2011 and web surfing (NOT watching any video) and listening iTunes.
Issue 2: When I log-off from computer, the screen flickers and goes to lower resolution. Also the windows colors changed to different colors. After log-in, I went to System Preferences > Displays. The highest resolution is already selected (1680 x 1050) When I try to change to lower, it changes but still displays different window colors and changing suddenly.
Troubleshooting Steps:
1.) Shutdown and Disconnected Power Cable (at that time battery is at 65%)
2.) Reconnected Power Cable and Power On the system
3.) Display shows correctly.
Unable to Resolve:
1.) Still fan is running on higher speed at low temp (below 60F with no major application running)
2.) Sometimes Display is not showing properly. It shows different color shades.
I scheduled support call with Apple Support and let's see what Apple can do...

I brought my first MacBook Pro 2011 on Day 1, so I can't return it since it won't come under 14 day return policy. I'm taking my Mac to Apple Store to fix all these issues. AppleInsider is also confirmed Disaplay Flicker issue on some of the models that they tested.
*Apple Support KB:*
On High Fan Speed Issue: http://support.apple.com/kb/HT4543
On Display Flicker Issue (not at exactly pin-point this issue): http://support.apple.com/kb/HT1573
On Gray Progress Bar Issue: http://support.apple.com/kb/TS3148
*Other Tech Forums:*
On back-light keyboard: http://forums.macrumors.com/showthread.php?t=1112874

MacBook PRO 2011 - Windows 7 - Can select HD graphics?

Dear all,
I'm considering purchasing a MacBook PRO 2011 17" model (for the hardware, not for OSX, sorry). I want to run Windows 7 on it (not virtualized).
I did see from the Boot Camp description that Boot Camp provides drivers for both the Intel HD and the AMD graphics card. I'm not concerned with automatic graphics switching, since I won't be using it for gaming.
Since I'm going to be travelling by train quite a bit and want to be able to do my work en route, I would like to know if I will be able to select the integrated Intel graphics under Windows 7 (x64), or if I'm forced to use the AMD graphics.
Thanks in advance.

AMD only. Graphics switching does not function under Windows 7 and the discrete AMD GPU is the one that is active. As the switching is not done via nVidia's Optimus technology, there is not a standard driver package that you can install that will achieve this (AMD/ATI's Catalyst package does not have GPU switching capabilities). Either Apple or a third party would need to develop and support this.

Is it possible to add a new graphics card to my macbook pro 2011 13"

Is it possible to add a new graphics card to my macbook pro 2011 13"?

Hi W,
Sorry, but no. It's soldered onto the logic board.

Graphic for macbook pro 2011?

Hi Guys:)
i reacently purchased the new Macbook pro 2011 and after a while of usage i wonder if there is any way external or internal (doesn't matter) to boost your graphic preformance??

7200RPM hard drives can boost your overall performance, and so can SSDs. 17" MacBook Pros can have external SATA via Express/34 added to boost performance. Hard drives that are over 85% full will significantly degrade performance. Make sure any hardware drivers or software you have has been tested with your GPU, and CPU, and operating system down to the point release. Just because something is 10.6.x compatible doesn't mean it is anything more than 10.6 and 10.6.1 compatible. It may have issues with 10.6.7.
Run the font update for 10.6.7 if it hasn't been already, if you are running 10.6.7:
http://support.apple.com/kb/DL1377

I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

you are welcome

Macbook Pro 2011 - Apple It's time

Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.

There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Macbook Pro 2011 clamshell mode broken by latest software update?

After installing the latest MacBook Pro software update and EFI update through Software Update in the evening May 4, I am unable to enter clamshell mode any more. It used to work before. After waking up in the clamshell mode, the machine promptly goes back to sleep. On subsequent attempts to wake up the system, the laptop itself appears to wake up (at least the sleep light stops blinking) but the display does not even wake up. I can still work with external dsisplay with the lid open but this is highly annoying. I have reset the PRAM with no effect. The machine is a 2011 MBP, 15" inch, 2.2 GHz quad i7. Keyboard and mouse are wireless Microsoft desktop but the problem is also present with wired peripherals.
Does anyone else see this problem after installing the latest patch?

Okay, I'll add my frustration here as well.
I've had this problem too, and more noticable since the 1.4 update.
I posted a thread similar to this here.
But I'll just copy over what my main problem was...
Whenever I plug my computer into my Cinema Display (with the computer closed) it won't wake up fully. The status light will come on, any external hard drives will spin up, but the display won't turn on and the computer will go back to sleep.
I have to restart the computer manually to get it to work normally, and if I disconnect it while it's between the sleep and wake mode and try to open it, the backlight will come on but the screen will remain black, causing me to have to force restart it.
This is in addition to my first problem with the backlit keyboard not coming on automatically after sleep, which was temporarily fixed by resetting the SMC, but it goes back to the problem after a week or so.
What could be causing either of these problems? Could it have something to do with BootCamp since I have it installed, or is there a defect?
I would bring it back to Apple, but there's a small dent in the front right corner, and I'm afraid they would deny any problem I have.
I took my MacBook Pro (2011, i7 2.2, 17") into the Apple Store on Monday, and after about an hour of attempting to replicate the problem with a different monitor, there was only one time where there was any sort of problem.
The employee told me to see if there will be a fix, or otherwise they will replace the logic board for me.
One thing I'd like to add as a note...
It seems that the problem is more prominent when I have my computer with everything on it as usual. As in, before I took it to the Apple Store I performed a clean install of OS X, and that may be related to how bad the problem is, any opinions?
I had attempted at reinstalling OS X from a Time Machine Backup, but the problems continued shortly after completetion. In addition to this, I clean installed OS X, and manually reloaded my applications and media, hoping that the problem had stemmed from some kind of broken file system that could be repaired by a new install.
But no matter how I do it, the problem comes back despite the method. It is really something I want fixed, as I pretty much only use it in clamshell mode when home...

Mid-2010 MacBook Pro Safari/Graphics issue??

Hi. Below I've posted a picture of what I've been experiencing on my mid-2010 MacBook Pro that is running Mac OS X Lion (10.7.1).
Usually, my screen stays like that for a few seconds, then those little things go away. However, when I took the screenshot, my screen stayed like that for about 20 minutes. I've had this issue in both Safari and Firefox. Even updating to 10.7.1, this still happens.
What could possibly be wrong? Is it a bug with Lion or is my graphics card at fault?
I really appreciate your help! Thank you!!

jodifromcinnaminson,
nope — one reason why the cost of Apple products in the US is low compared to prices in other countries is that the prices in other countries often include seller’s warranties which extend beyond the manufacturer’s warranty; that’s not the case in the US.
If you’re intent on purchasing no more Apple products because of how they’d handled the 15-inch Mid 2010 MacBook Pro defect, then I’d highly recommend writing a letter to Apple explaining exactly why you’ve made that decision.

Macbook Pro 2011 running very slowly after upgrading to Mavericks

I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
          Hitachi HTS545050B9A302 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Dropbox
Internet Plug-ins:
          LogMeInSafari64: Version: 1.0.730 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          Silverlight: Version: 4.0.50401.0 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.730 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          LogMeInSafari32: Version: 1.0.730 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          SuperDuper!:          Version: 2.7.1 - SDK 10.4 3rd-Party support link
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               7%          Safari
               6%          Dropbox
               5%          WindowServer
               3%          hidd
               2%          com.apple.WebKit.Networking
Top Processes by Memory:
          119 MB          com.apple.IconServicesAgent
          106 MB          Safari
          94 MB          Finder
          94 MB          Dropbox
          94 MB          Mail
Virtual Memory Information:
          1.26 GB          Free RAM
          1.44 GB          Active RAM
          311 MB          Inactive RAM
          1014 MB          Wired RAM
          251 MB          Page-ins
          0 B          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Macbook Pro 2011, Graphic automatic switch - High Res, antiglare screen

Similar Messages

Maybe you are looking for