Macbook pro c2d dissipate heat through the keyboard?

The reason im asking if the mbp c2d lets heat out thru the keyboard is because I've been using it in clamshell mode (with the lid closed and connected to a monitor)
I left the white film laying on the inside covering the keyboar. The film is that white cover that that protects the keyboard and screen for new laptop. It was intentional just to keep it mint, but is that ok?

Yes but minimally, so it won't affect its use on clamshell mode. I would however remove the white film inside as this does interfere with airflow through the small space between the keyboard and display.
One very low tech gadget that I used to keep the lid of my PowerBook propped open was an eraser. The reason was that I never liked it closed without a keyboard/display protector (RadTech ScreenSavrz) so the next best thing for me was to prop it open just a bit.

Similar Messages

  • How can I install Mountain Lion in a VMware fusion, if it came with my macbook pro, and not purchased through the app store?

    I have Mountain Lion on my Macbook Pro with Retina but I want to install Mountain Lion in a VM for application testing. I try to install it from the recovery partition but it states that when I put in my apple ID, it states that it was not purchased through the App Store. My OS came with my Macbook. Is there anything that I can do to get it to install in a VM?
    Thanks

    Not really. The license that comes with pre-installed OS is only for that Mac.
    A. Preinstalled and Single-Copy Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non- exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple- branded computer at any one time. For example, these single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple-branded hardware.
    vs
    B. Mac App Store License. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/ itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
    ( i ) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software...
    (ii) If you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of...and
    (iii) to install, use and run up to two (2) additional copies or instances of the Apple Software within virtual operating system environments on each Mac Computer you own or control that is already running the Apple Software, for purposes of: (a) software development; (b) testing during software development; (c) using OS X Server; or (d) personal, non-commercial use.
    (I shortened B.i. and B.ii.)
    http://www.apple.com/legal/sla/docs/OSX1082.pdf

  • I would like to buy the MacBook pro ME294LL ,but I want the keyboard and system support Arabic language!

    I would like to buy the MacBook pro ME294LL/A, but I need the keyboard and system support Arabic language!!

    Nobody in these forums represents Apple or any store.  If you want to buy something, you must contact stores directly yourself in the country where you live.  Apple stores do not ship outside their own county.

  • New Macbook Pro 15 inch heat on the left and back bottom.  Also, Fan is constantly running although I am only using Safari and it is a month old machine

    I have a new macbook pro about a month old.  Have not used for anything but internet browsing it is a 15" machine, I can feel the heat from the left corner and back bottom.  Also, the fan is constantly running.  Is this something I can do to resolve.

    Fans are supposed to run whenever the Mac is on. Default/minimun speed is 2000RPM.
    How hot is hot? Mine is running the CPU cores at 45-50C, the Radeon GPU 35-40C when not engaged, the chassis sensors 30-38C. And current ambient temperature is 27C at my location. I currently have Safari, Mail, TextEdit and Temperature Monitor online.
    If you want a quick check of what the Mac's hardware is up to, download & install the iStat Pro dashboard widget. If you want a detailed view of the 20 or so different temperature sensors on the thing, download & install Bresink's free Temperature Monitor. And if you want  to see ALL the different sensors it has, purchase Bresink's Hardware Monitor.

  • Can my NEW MacBook Pro mirror my MacMini through the Time Capsule?

    I have recently purchased a MacBook Pro w/Retina Display.  I also have a MacMini about one year old which is tied to my Time Capsule for backup.  What process does it take to make certain that tasks I perform on either device will sync with one another?  In other words, I would like the data on both to be identical as tasks are performed such as that which happens with the iPhone, iPad etc when an address is changed for example within the Contacts.  Thanks!

    As long as they're all logged into iCloud with the same account, they should all show the same Calendar, contacts, etc.

  • Macbook Pro C2D 15,4" on order - Should I worry about the display?

    I have ordered the new Macbook Pro C2D 15,4" and I read the numerous threads here about the display quality. I have just selled my CD Macbook Pro 15,4" so I want to ask you all here, is there a difference between the new and the previous model, or do you think that both are grainy?
    I personally found the display of the Macbook Pro CD very good and I hope that the new is at least as good as that one.

    My advice to you is check it out before you buy it. I've gone to 4 different apple stores or resellers and all the ones I've seen on display have unevenly back lit displays. You can tell the cd from the cd2 from the lighting. Its very obvious as you take a look at them side by side. You'll notice what i mean if you look at the very bottom corners of the display. There is more light coming through than the rest of the screen and this is very annoying. There also seems to be burn marks at the very corners, they are faint and gray but also noticable. In fact there seems to be a bar of light that looks like a reflection of the macbook pro, but is actually uneven lighting all the way across the bottom. Definately bad. I went through 3 17" macbook pros cd2 at the store and all 3 of them exhibited the same uneven lighting. So then i went with a 15" but that too had the same problems. I'm going to wait it out for another month or so. I love the macbook pros, but I want to spend my money on a good product.
    macbook pro 17" cd2   Mac OS X (10.4.8)  

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

  • My Macbook Pro Retina display heats up and makes a certain sea wave like noise. what could the issue be?

    My Macbook Pro Retina display heats up and makes a certain sea wave like noise. what could the issue be?

    You should have a backup in the first place. If you don't, buy an external drive (they're inexpensive these days) and make a Time Machine or a clone backup (using Carbon Copy Cloner).
    Then take your machine to your local Apple Store or an AASP and let them diagnose the computer. See if they can isolate what may possibly be making the 'clicking' sound.
    Clinton

  • HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

  • HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

    Hi everyone,
         My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?   

    It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty.  An appointment at an Apple genius bar might be a good option.  The repair should not be too expensive.
    Ciao.

  • Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please help

    Hello I can not access my account through MacBook Pro solution knowing I access the account through iTunes and iPad please helpfile://localhost/Users/mhmd/Desktop/%E2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢ ١%20في%20٥%E2%80%8E.١٦%E2%80%8E.٤٢%20ص.pngfile://localhost/Users/mhmd/Desktop/%E 2%80%8Fلقطة%20الشاشة%20٢%D9%A0١٢-١٢-٢١%20في%20٥%E2%80%8E.%D9%A0٩%E2%80%8E.٤١%20ص .png

    Ummm...
    Can you explain in details what happens when you try?

  • I have connected my MacBook Pro to my television using the correct cables, but now I cannot hear sound, only through my MacBook. How do I get the sound through my television?

    My MacBook Pro is up to date on updates and it's a Westinghouse television with a rocket fish hdmi connecting cord.

    What MacBook Pro have you got? Not all MacBooks Pro can transfer audio through Mini DisplayPort, Thunderbolt or HDMI > http://support.apple.com/kb/ht4241
    If you have connected the TV to your Mac through Mini DisplayPort or Thunderbolt and your computer doesn't support audio over that port, you have to connect external speakers

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

Maybe you are looking for

  • Another Boot Camp Question (Internet Security this time)

    Still doing my "homework" to prepare to install Windows (I will be using Vista Ultimate for awhile to start). I've been reading a bit here about how Windows can be vunerable just by being connected online. My routher does have the firewall on, and I'

  • Row-level security problem using VPD

    Hi all, I've implemented row-level security for my application using the following procedure: 1) Created a procedure for setting the context for the application: PROCEDURE set_empno IS emp_id NUMBER; BEGIN BEGIN SELECT empno INTO emp_id FROM SCOTT.EM

  • Authorization on variable in BEX

    Hi. I have a following situation in Analyzer. I have an authorization variable in a query. The authorization is correct in pfcg and rssm and the variable costruct too. The problem is: when i start the query, in the popup, the value isn't the value as

  • Unable to send myself a test picture or message using MMS

    11-01-2009 02:01 PM I have a 8820 and my provider is t-mobile.  I have been trying for a month now to figure how to send myself a test picture and message to verify that MMS is working.  I have had several different phone models from other companies

  • Screensaver transitions in Classic Mode broken with upgrade

    They all just do a quick flash through white. I'm hoping there'll be a fix. Just wanting to make it known so hopefully it will get picked up on.