Macbook pro cannot find CD burn software?

Hi, I have a SuperDrive and just want to burn a CD from iTunes playlist but it can't find the burn software?  It the latest MBP so it 'should' be there, no?

There is no seperate burn software.  iTunes will burn the CD for you.
Follow the instructions in this artcle: https://support.apple.com/kb/PH12148

Similar Messages

  • MacBook Pro iTunes says "disc burner/software not found"?

    MacBook Pro iTunes says "disc burner/software not found".  What does this mean?

    Hi Jetx273,
    If you are getting an error message of "Disc Burner or Software Not Found" when trying to burn a CD in iTunes, you may want to take a look at the following article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    Regards,
    - Brenden

  • Macbook Pro cannot find Bose Soundlink via USB

    Since a couple of days I have the following problem
    The MB is connected via Bluetooth, music is playing on the Soundlink. But when starting a movie, the sound is not played anymore. Going back from full screen, a disturbing noise is played until I stop that. Sometimes it worked going from normal view to fullscreen mode and the sound was back as it used to.
    However, my MB doesn't want to connect anymore properly with the soundlink now. It says that it is connected, but the speaker is still looking for any device to get connected (btw. no problem with my iPhone and the Soundlink).
    Reset - no help at all.
    Update -> USB-cable connected and my MB doesn't find any USB-devices connected and therefore I cannot proceed with the update. But I think my Macbook is the problem, not the soundlink.
    Any suggestions?
    Thx!

    Btw.
    I updated OS X. It still "connects" as soon as the Soundlink is available, although the Soundlink is not connected. I get the impression that my MB is the troubleshooter, but Bluetooth is updated.. So.. W T F!?

  • My macbook pro cannot find any wifi networks unless it is in the same room as the router.

    whats wrong with it and how can i fix this?

    Here is some info from the Apple data base
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    OS X Mountain Lion: Resolve IP address conflicts
    Also is there metal near/around the router, tht can cause issues with radio waves, you may want to try a different location for the router.

  • "Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

    I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
    I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
    I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
    However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
    pasting the path to the file and dragging the file to the VM, but no luck.
    If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

    Hi,
    According to your description, I would like to confirm if you have unchecked the Express installation box.
    Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
    I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
    Using Parallels Desktop to install Windows and the dev tools on your Mac:
    http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
    Regards,
    Kelvin hsu
    TechNet Community Support

  • HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

    Hi all
    I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
    So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
    I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
    But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
    btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
    PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

    I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
    I have tried the command/option-PR reset combo with no luck.
    Any ideas?
    thanks,
    -graham
    PS the specific error i got from iDVD was: The error #-2147352539 was reported…
    Message was edited by: Graham - Sonos

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • Macbook Pro cannot connect to the internet even when others can

    Hi! Please help me. We have an internet WIFI connection in our office but only my MacBook Pro cannot connect even when I entered the correct password. My Iphone and Ipad work just fine. It says "connection timeout" but all other laptops can connect. I tried network diagnostics already and it always say "connection timeout". I dont know what to do anymore.

    Yes, and when I open the Network Utility it shows a working IP address, and a 54Mb/s speed from the wireless router. It even shows the shared computers from my roomates. But when I try to access the internet it does not load anything on Safari or Firefox ( or any other internet application for that matter). It is completely unconnected. YET, As soon as I activate the AirPort card on the top right where I have my signal strength, it shows on the Network Utility information that there are 'packages' being sent and received, and I have NO programs open what so ever, I have closed everything except finder and network utility... Does this mean I am being hacked, or have some sort of Trojan or something in my computer? I ran an antivirus that my school provided, called Virex by McAfee, it came out clean except it says it cannot read one file.
    I tried repairing my disk, and that did not work either. I did the Ram reset like you suggested, but that also did not work. I doubt it being a hardware error. I am going to try to connect it to an ethernet cable to see if that will work. Then I will let you know what happens with that, but that would still not be a solution since I need it wireless, cause the router is in another part of the house.
    Thank you for your help, and I hope we can get this sorted out.

  • MacBook Pro not booting up after Software Update ('prohibited' symbol)

    Hi there
    I'm having some issues with my (late 2008) MacBook Pro after installing a recent software update: the machine is not booting up, instead displaying the 'prohibited' symbol on the grey bootup screen, thus:
    !http://img828.imageshack.us/img828/7215/photovl.jpg!
    The back story: this morning I ran Software Update and installed the iWork update, the latest security update and the Snow Leopard Graphics Update. This installation apparently went fine, however on the required reboot the computer displayed the above image, and did nothing.
    I booted from the Snow Leopard install DVD, fixed disk permissions and repaired the disc, which Disk Utility claimed was successful; the computer still would not boot.
    I then rebooted from the Snow Leopard DVD and restored from my most recent Time Machine backup (dated a few days ago, before the software update). This, still, did not do the trick.
    As I have never seen this particular issue before, I'm at a loss as to what to try next, partly as I don't really know what the symbol is signifying. Any assistance that can be offered would be very, very useful.
    Cheers in advance!

    Thanks for that, I did go looking for it but couldn't find it.
    Unfortunately, resetting the PRAM and NVRAM didn't work. Will a reinstallation of OS X make a difference, bearing in mind I've already restored from a Time Machine backup? (I don't know if those clone everything or don't include system files).

  • I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

    I installed my new iMac with my Macbook Pro 2008 back up.  I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet.  any ideas on why or what to do about it.

    Hello 1BillyMac,
    It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
    OS X Yosemite: Add a network location
    A network location is a group of network settings
    A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
    If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings. 
    For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort. 
    Choose Apple menu > System Preferences, then click Network.
    Click the Location pop-up menu, choose Edit Locations, then click Add . 
    Enter a name for the location, then click Done.
    Enter settings for each network connection service you want to use in that location.
    After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

    We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

  • Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

    ***   When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My macbook pro cannot connect to the app store is there anyway of fixing this?

    my macbook pro cannot connect to the app store does anyone know how to fix this?

    Read threads listed on right under heading More Like This
    Allan

  • MacBook Pro Cannot Connect To AirPort

    Hey everyone,
    Today I opened up a brand new MacBook Pro to find that it couldn't connect to AirPort. I use a WEB 40/128-bit hex. Is that a problem? I use a D Link router. Every time it comes up with "There was a error joining the network "networkname"."
    Thanks,
    Louis.
    MacBook Pro 15" | 2.2 GHZ | Glossy Screen   Mac OS X (10.4.10)  

    Fixed! You jut need a girlfriend with a lot of determination....not even sure she knows how she did it. Involved a lot of menus and a lot of swearing.
    Surely this should be easier?!

  • Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Remove "Rapport" by following the instructions on this page.
    Back up all data before making any changes.

Maybe you are looking for

  • IPhone 5s Recent Call List Limit

    What is the Recent Call List Limit for an iPhone 5s? Can you view the entire Recent Call List Limit from the screen? Today, as I would delete a call from the list, an older call would appear at the bottom of the list. Thanks!

  • What happens if column from idex is dropped and recreated

    I have question. I need to drop one column from a table. That column is part of unique index. If i drop a column and recreate it would it drop index also. Do i need to re-create the index also. Thanks

  • Camera RAW start with the crop tool automatically selected?

    Is it possible to enable camera RAW to start with the crop tool automatically selected?

  • Unable to launch SXMB_IFR

    1.) When trying to run SXMB_IFR the followng message is coming. 2.) When trying to run the transaction SPROXY I am getting a mesage " No connection with Integration Builder." Most urgent.........

  • Java Importer - Error Occuring While invoking

    I have installed form6i along with the forms6i server in my machine.When I try to invoke the Java Importer I am getting an error message as "PDE-UJI1 Unable to create JVM". I have set the classpath for importer.jar and also installed jre1.3 in the ma