Macbook pro ,i just upgraded to lion and now my itunes is not working .i tried to reinstall itunes all in vain

SO FAR LION IS NOT THAT GOOOD AS SPEED OF MY LAPTOP IS VRY SLOW NOW AND  MOST OF THE THINGS ARE GIVING ERRORS

sdr191219 wrote:
it now says "iTunes Store is temporarily unavailable, iTunes is unable to check for downloads" Any help would be appreciated!
maybe they are doing maintenance?  I would wait awhile and check back later.

Similar Messages

  • Just upgraded to lion and now my iTunes says the store is temporarily unavailable and it is unable to check for downloads

    I only upgraded to Lion because of iCloud. I have an AppleTV, an iPhone 4S and my MacBook Pro so it just made sense.  But now, I was in the process of downloading a season of a TV show that I purchased earlier today and it still had about 15 episodes left to go and it now says "iTunes Store is temporarily unavailable, iTunes is unable to check for downloads" Any help would be appreciated!

    sdr191219 wrote:
    it now says "iTunes Store is temporarily unavailable, iTunes is unable to check for downloads" Any help would be appreciated!
    maybe they are doing maintenance?  I would wait awhile and check back later.

  • I just upgraded to Lion and now my microsoft doesn't work. What program is replacing entourage?

    What is apples version of microsoft office?

    You most likely are using Office 2004 which requires Rosetta. Lion now longer supports Rosetta so all PPC-only programs fail to work. The solution is simple: upgrade to Office 2011.

  • I upgrade to Lion and now my Mail does not open, who can help me out?!

    I upgrade to Lion and now my Mail does not open, who can help me out?!

    I cannot get to the mail menu bar.  When I try to open mail, I get "you can't use this version of mail with this version of Mac OS X.  But the help suggestions don't work either.  I am trying to download an update combo v1.1 to see if that helps. Thanks

  • I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

    I just downloaded Windows 10 and now my headphones are not working and the other caller
    can not hear me.

    Please download and install the driver from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • I just downloaded OSx Lion and now MS word won't work. If I buy and install MS Office 2011 for Macs will my old documents open?

    I just downloaded OSx Mountain Lion and now MS Word won't work. If I buy the current MS Office 2011 and install will I be able to read my old docs?

    If it's because you're trying to use Office 2004 or earlier, yes. Note that programs such as OpenOffice and TextEdit will do this for free.
    If you're using Office 2008, it's probably better to troubleshoot the problem instead of upgrading.
    (73460)

  • I just upgraded to Lion and now cannot add attachments to my emails in Safari or use the search window.  What gives?

    I had been holding off upgrading to Lion because of the bad press, but discovered that I could no longer receive email on my Mac because my iPhone had been moved to iClound by an Apple tech when it had to be replaced, and my Snow Leopard version wouldn't support iCloud.  So I upgraded to Lion and immediately began having trouble.  First I was told that several of my software applications were incompatible and had been removed.  Then I discovered that Safari (apparently the latest version 5.1.3) had lost functionality.  I can't attach anything to my emails and the search window is grayed out and inoperable. Is there a fix or do I need to retreat to Snow Leopard?  Bob Kellam

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    As Guest, test. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

  • Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if I upgrade to Lion and then restore from the external drive?

    I ordered the disk to update to Snow Leopard.  Did that so I could get the App Store.  Did that so I could download Lion.   After I installed Lion my MacBook is super sluggish.  Takes like 6 seconds just to open a drop-down menu in Finder. 
    I have been backing up. Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if wipe my drive using the USB Lion OS stick (which I think I'll have to buy even though I downloaded the new OS online)?  I have been plugging my laptop into the Lacie drive set on "auto" and it's been working great.
    One Genius said yes "you will get everything back" but my Mac buddy says "say goodbye to most of your apps".  Then a guy at the university I asked "do you have a disk image". And I said "what the **** is a disk image?".
    Is the problem that I installed an OS on top of new OS without wiping the drive?  Or, is my MacBook Pro too old? Do I need to buy a new one?
    15-inch, Late 2008
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  2 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    Software  Mac OS X Lion 10.7.3 (11D50b)
    Any help?

    SA will indeed transfer accounts, files and apps at first start. Can do so even faster if you clone the internal HDD onto the external (just split into a partition large enough to contain it) and then use it as the source. Probably faster than Time Machine too. The safest and quickest way to do a disk image or clone is using CarbonCopyCloner (free), and it will preserve the Lion Recovery Partition too.
    Since you'll have to re--download the Lion installer again, note that you can concoct your very own Lion Installer USB Stick with it prior to reinstalling and not have to pay for the Apple-branded version. See Kappy's tutorial: https://discussions.apple.com/thread/3786371?tstart=0
    As for the sluggishness, I believe that a great part of the cause is that you only have 2GB RAM. Don't know if your Mac can take more but try at least to get to 4GB, if not 8GB. Should attempt this before  messing with the reinstall, as this may get you what you want.

  • Just upgraded from Mountain Lion and now some programmes do not work. How to go back to Mountain Lion

    Just upgraded to Yosemite from Moutain Lion. Want to go back as it refuses to run some programmes

    Yosemite/ OS X Mavericks: Revert to a previous OS X version

  • I just upgraded to lion, and now my wi-fi printers don't work. How do I get Lion to find them again?

    How can I get Lion to find my wifi printers?  When I upgraded to Lion, I could no longer print to them.

    did you run software update to see if any new drivers are available?

  • Just upgraded to leopard and now new keyboard won't work

    I just upgraded my system to Leopard, and everything went smoothly. When I installed I had my old keyboard attached as I didn't want anything to got wrong. Now since trying to use the new white key Mac keyboard that is out now, it won't work. I tried to go into preferences under keyboard and mouse but there was no choice there to change keyboard. What can I do?

    Apple's download search function is pretty messed so that may not be the right file. The one that Software Update offered for my MacBook Pro when I had the Al board attached is "Aluminum Keyboard Firmware Update" and is v1.0. It was in my Utilities folder.
    I had to Google to find the other link, but it's here:
    http://support.apple.com/downloads/AluminumKeyboard_Firmware_Update_10
    See if that helps. It looks like this and Leo go together, so could explain why you the board doesn't like the change.

  • I just moved to iCloud and now my email is not working on my non compatible MacBook, but all other devices seem to be working.

    I have several Apple products, some eligible for iCloud and some not.  I was using MobileMe and elected to keep my email address after June 30.  I moved to iCloud and everything seems to be working except for my MacBook that couldn't be upgraded to Lion so not eligible for iCloud.  Now my email doesn't work on that machine.  What's wrong?

    Welcome to the Apple Community.
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • I just installed mountain lion and now my vmware doesn't work

    Can anyone let me know if vmware fusion is not compatible with mountain lion and wether there is an upgrade i need to do to access my pc data?  It will not open at all now.

    Latest version is 4.1.3
    Do you know what version your running?

  • HT5262 I tried to upgrade my software and now my phone is not working, it's telling me to plug it into iTunes and I just did but nothing.

    I tried to upgrade the software of my phone and now it tells me to plug it into iTunes. It's now plugged in and nothing, keeps showing me to pklug it into iTunes. What do I do next?

    How to use your iPod to move your music to a new computer

  • Help! I just upgraded to Lion and now iDVD will not play any projects. Any ideas?

    I finally downloaded and installed the latest OSX Lion update. After doing this, I find that when I launch iDVD to work on projects, no content is shown in the project at all, just the empty template. Any thoughts on this? I would hate to have to recreate my .dvdproj files again!
    Thanks,
    Frank

    Try the following: download  BatChmod and run on the iDVD project package with the settings shown in the screenshot below:
    Click to view full size
    If your files use a different Group you can use it.  Then launch iDVD and see if you can open the project file.
    OT

Maybe you are looking for

  • Smartform--urgent

    I have one requriment, From report i am calling smartform, in that report we have around 10 check box , based on this check boxes i need to display data in smartform, for everycheck box i have taken one window mean its 10 window, but problem suppose

  • Changing file clicking default behaviour for all users

    Is there a way to change the default file clicking behaviour for all users? Each user can do it himself by going via the username menu ("Personal Preferences", "When clicking on a file...") but I would prefer to set it for all users to a value that i

  • How do i turn off the feature that browses album art work in landscape view?

    How do I turn off the feature that browses album art work in landscape view?  My videos will not play full screen since I updated my phone to iOS 7.1.

  • Inspection Text

    Dear, Can i get the download of inspection Text form any table. Also the Basic Text in Material Master Additional Field. Ramesh Jaiswal.

  • Ratings and keywords

    How can I see only the ratings and keywords in the viewer ? thanks