Macbook Pro Key issue

I have a 13 inches macbook pro which is still under warranty.
Unfortunately one of the keys came out and when i took it to the service centre i got a reply that the outer part of the key is damaged and cannot be replaced.
I was told that it's a "physical damage" and will not be covered warranty.
The solution, according to the service center, is to get the entire key board replaced...
I am disappointed and shocked to know that apple does not provide us with spare key caps.
Just to point out, the inside hinges are undamaged so effectively its the key cap that needs replacement.
If i have to shell out a handsome amount of money just to get a minor thing fixed then i am better off without a mac....
Really disappointed

http://www.machinaelectronics.com/store/keyboardkeys/Apple_MacBook_PRO%20UNIBODY _13%22

Similar Messages

  • Macbook pro shutdown issue

    Macbook pro shutdown issue when I push the power button it immediately goes into sleep mode

    Hello Marrio22,
    Thank you for the question.  With OS X Mavericks, the power button has new functionality:
    OS X Mavericks updates the power button behavior on Mac computers. 
    Using the Power Button to Sleep & Wake
    Tap the power button in Mavericks to put your Mac to sleep or to wake it up:
    Tap the power button once to put your Mac to sleep.
    Tap the power button again to wake your Mac.
    Press the power button for less than a half a second to sleep or wake your Mac. This duration is similar to pressing the Space bar or Return key to wake your Mac. The power button works this way across all Macs using OS X Mavericks, including both notebook and desktop computers.
    Accessing the Shut Down Dialog
    Press and hold the power button for 1.5 seconds, to bring up additional options:
    Forcing the Mac to Turn Off
    Hold down the power button for 5 seconds to force the computer to turn off. Important: You may lose unsaved documents if you force the computer to turn off this way. Use this method of turning off your Mac only if it has become unresponsive for an extended period of time. Normally you should shut down the computer by selecting Shut Down from the Apple menu, or from the shut down dialog pictured above.
    OS X Mavericks: Using the power button
    http://support.apple.com/kb/HT5869
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Macbook Pro Wifi Issue

    I incorrectly posted this in the wrong thread this morning.
    I'm hopeful you might be able to help me diagnose a problem I'm having. I'll provide as much detail as possible.
    I have a first generation MacBook Pro. As of this morning I was running 10.5.6 and up until this week was using a linksys router and a comcast cable modem.
    I used to have a great wifi signal throughout the house (always full strength), and around 12-18 months ago noticed the signal would weaken. The best I would get would be minus the top bar on the signal, and usually only if I was directly above or next to the room with the router. There were no new phones or devices added that might adjust the signal. On the other side of the house, I would have no signal at all.
    My wife has a nine year old ibook and has no issues connecting through wifi.
    When I bring my laptop to her parents' house or to the Apple store, where they use Belkin on N or Airport Extreme, I get a full signal.
    I've recently suffered a hard drive failure and had a replacement drive installed. The problem persists despite the software update.
    Not knowing if it was a router issue or an airport card issue or a combination thereof, I went to the Genius Bar. The genius recommended I upgrade my router to Airport Extreme, and if that doesn't work to return it and he'd focus on the airport card or antenna. I could get the flat rate repair (no AppleCare at this point) for $320+ to repair the problem if Extreme didn't work.
    I installed the Airport Extreme router and got a full signal in the basement, far side of the house, upstairs - everywhere. Until around 10pm. The signal died from the basement. If I walked into the room with the Airport Extreme router, I'd get a full signal. If I left the room, I'd get a partial signal. If I walked any distance (10-12 feet), the signal would die. I restarted both the modem and router with no change. I reinstalled the linksys router and got a depreciated connection. I restarted the Airport Extreme again and got a full signal throughout the night, morning, through restarts, and when I returned home from work.
    Last evening after using youtube extensively it died again. Linksys would barely work if I switched back, and no matter how many times I restarted I couldn't get the signal to last outside of the area of the router. I left it in the basement overnight shut down, restarted this morning, and had a full signal.
    I'm looking for any potential guesses as to what may be causing the problem. I don't want to replace the card if it's the antenna or sink too much cash into a machine if it's a heat related issue linked to Generation 1 syndrome.
    During all of this the ten year old ibook works fine. I know a lot of macbook pros have issues with their wireless and don't want to sink in the cash if it's more complex than that. Any advice is much appreciated!

    Hi nashie1002,
    If you are having issues connecting to your WPA2 WiFi network after a recent update, you may find the troubleshooting steps and settings in the following articles helpful:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Apple Support: About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    It may also be worth doing a search for the specific model number of your router to see if anyone has noted any issues with Mavericks.
    Regards,
    - Brenden

  • Can't install windondows 8.1 on my macbook pro - format issue

    Can't install windondows 8.1 on my macbook pro - format issue
    Running latest version of Mavericks.
    Followed the exact bootcamp proceduce.
    Have official window 8.1 version on cd.
    All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
    Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
    I have two questions:
    1/ How to start my mac again in normal mavericks mode?
    2/ How can I overcome the windows installation issue?
    Tried already a lot of hints found on the internet.

    First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
    Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

  • MacBook Pro keys not working.

    Help! My MacBook Pro keys Q-O aren't not working. I've tried doing a Pram restart, but it won't work as keys P & R aren't working, and I can't login as my password contains broken keys. Any ideas on how I can fix this?

    Try a SMC reset;
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Check these as well
    One or more keys on the keyboard do not respond
    OS X Mountain Lion: If keys on your keyboard don’t work disregard the OS X in the title
    If no joy, you can take it to an Apple Store Genius Bar for a FREE diagnosis, make a appointment first to save yourself some time.
    http://www.apple.com/retail/geniusbar/

  • Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

    hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

  • MacBook Pro Key ` has came out

    Hi There,
    My MacBook Pro Key has came off fully
    It also looks like some other keys are coming off, but I am not sure, one of the keys have clipped back on but then just comes back off.
    It is under warranty, considering it is just a few weeks old.
    Will I get it repared for free or my MacBook Replaced?
    What service/repair plan will they likely to give me?
    The Key is `
    Thank You
    J Mahone

    This can be used to boot the machine and delelte enough files to get it to boot normally.
    .Create a data recovery/undelete external boot drive
    Read about storage drive so you can store your extra stuff.
    Most commonly used backup methods
    Also here to see how a full boot drive slows the machine down
    Why is my computer slow?

  • MacBook Pro HD issues; won't boot to any drive; need to recover data

    *Apologies in advance for the lengthy post. I just want to be sure I include as much detail as possible. Thanks in advance for reading all of this and offering any thoughts and suggestions.
    I have a 13-inch late 2011 MacBook Pro running OS 10.7.
    The computer recently began booting slower and slower until finally one day it did nothing but show the gray boot screen with the apple and a spinning circle and/or progress bar at the bottom. It won't do anything else. I assume it's the HD; no surprise there. What's killing me is that no matter what I do, I can't boot to any disk, internal or external, can't mount it in target disk mode, and can't repair it or recover data, which is a first for me with any HD. However, the computer still clearly sees the drive, and the drive sounds and runs normally (meaning no clicks; appropriate amount of whirs and such).
    What I've done so far:
    Reset PRAM — no help
    Reset SMC — no help
    Boot in Safe Mode — same result as regular boot: gray logo screen with spinning wheel
    Disk Utility message:
    Verify Disk — "Error: This disk nees to be repaired. Click Repair Disk."
    Repair Disk — gets as far as "Checking catalog file" then shows "Keys out of order". Next is "Rebuilding catalog B-tree." Then "The volume Macintosh HD could not be repaired."
    fsck — same as Disk Utility: "Keys out of order (4, 22016)", "Rebuilding catalog B-tree", then "The volume Macintosh HD could not be repaired." FILE SYSTEM WAS MODIFIED." ...over and over again
    If I hold Option while starting the computer, it gives me only two drives to boot from, regardless of any other external HDs or flash drives I have attached: Macintosh HD (internal), and Recovery HD (internal partition). If I choose Macintosh HD, it's hit or miss whether it prompts the Disk Utility screen or just gray-screens forever. If I choose Recovery HD, it successfully runs Disk Utility every time. Here's the thing, though — if I attach an external HD, it doesn't see it during the initial Option-startup. However, from Disk Utility I'm able to select a startup disk from the menu to restart into. It sees the externals in there every time and lets me select them as startup disks, but upon restart it returns to the gray Apple logo screen with spinning wheel and/or progress bar at bottom. Sometimes it also sees the internal Macintosh HD here, but selecting that is useless. I can't actually boot from any disk, internal or external, running full OS or even just recovery software.
    I've tried using TechTool Pro 8's edisk and ProToGo bootable drives, but again, the MacBook only sees them from Disk Utility only (not on Option-start), and I can select them, but it doesn't actually boot to them; it reverts back to gray screen.
    I've installed a full version of OS 10.10.2 on an external hard drive, complete with DiskWarrior 4 on it, but same problem as above — it sees it in the "Select Startup Disk" menu, but not in the initial Option-start or successful reboot.
    I've tried booting from a DiskWarrior 4 DVD using C-startup. It recognizes and spins the DVD from the get-go. Eventually it boots to it (after about 20 minutes or so of reading the DVD). I'm able to launch DiskWarrior 4 and start a rebuild. However, it goes all the way through "Step 6: Constructing optimized replacement directory... Overlapped files detected: 7 ...Step 7: Finishing construction ...Step 8: Reading from disc, one moment please..." and then the computer kernel panicked. This happened several times. I reset the PRAM again, then retried DiskWarrior DVD boot, this avoided a kernel panic and it got as far as "Comparing directories... Step 9: Recording any file or folder differences; 3,449,089,956 tests..." and then DiskWarrior and the computer both freeze and I have to force shutdown.
    The drive will not mount to another laptop in Target Disk Mode.
    Disk Arbitrator immediately sees the the faulty laptop HD, but won't let me mount or unmount it. It's just there, grayed out.
    Data Rescue 4 is able to see the faulty laptop HD through Target Disk Mode, even though the drive itself will not mount to my desktop. I am able to scan the drive using DR4, and start a data recovery process. However, DR4 is dumping all recovered data into "User Defined" ai (Adobe Illustrator) files, which makes absolutely no sense at all. What's more, the files aren't able to be opened by any program. Even files that it hasn't recovered into ai files, like txt and mpegs, cannot be opened. I've tried recovering from both the drive itself and from a clone of the drive (made through DR4), with the same result each time.
    So, all of that said, I guess my first question is what the **** is going on? The drive mechanically is functioning fine, but there seems to be an issue with its readability (and the directory/files?).
    What's more, why won't this laptop mount ANY drive? I should be able to Option-boot into any drive, especially if the USB ports, drives, and OS's are all fully functional, right? Is there any workaround I'm missing? Even if the internal drive and data are just screwed, what's causing a total lack of mounting or booting of any drive, internal or external?

    Holy crap, I got it to work.
    Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
    So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
    I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

  • MacBook Pro Heat Issue

    I just recently received my MacBook Pro this past Wednesday and I've been addicted since. This is the first Mac I've ever owned and felt it was time to move onto something better and more stable than M$. I do use Linux but it doesn't have near the support like Mac does except maybe Suse (only because of Novell).
    My problem is my MacBook Pro gets very hot. I've read the entire book that came with my machine and I noticed that it said that the operating temps are between 50-95F (10-35C). Am I reading/understanding this wrong? I've performed average use of my machine and have used a Class 2 Laser thermometer (made by Stanley) to take the temp and i've reached up to 115 degrees F just above my function keys.
    If i remember correctly from left to right it goes Northbridge, GPU, and then CPU. The 115 mark was at my CPU on the far right side. I also never hear the fan on this machine come on. This is the quietest lappie I've ever heard after extended use. You hear the fans spin up all the time in the Dells, Gateways, Compaqs, etc.
    One of my coworkers turned me to the overheating issue with these machines and it made me quite nervous. I understand that they had somebody who had cerebral palsy apply the thermal grease. What i gather and understand is that is now become an insulator instead of an adhesive. Is there a Real way to remedy this situation?
    I've read stories of people having this issue and stating they took the machine apart themselves, cleaned up the goop, reapplied AS5 and their temps dropped (from reports) 15-25F and even only 2 degrees F. I know that silicon can take a beating in the heat but i'm kind of worried about the other components in my machine.
    Is this firmware update really going to make a difference or is this some form of coverup? I'm being cynical now but i'm worried that such a great product is going to be a very large paperweight. I ran tests on my old Gateway 600 series laptop (top of the line when i got it) and it hangs and about 98-99F at its high points. The fan also kicks on and is loud as **** but seems to cool it enough to be reasonable. Although, this machine does make me quite warm when sitting on my lap.
    Does anyone have ANY ideas as to what can be done? Or what have you done to try and remedy the issue? Am I doomed like the rest of you that have this lappie? I haven't seen anything from apple about this issue other than some firmware update.
    Thanks for the help and ideas in advance!
    17" MacBook Pro   Mac OS X (10.4.6)   2.16GHz / 2GB RAM / 120GB HD

    Master P, you did misunderstand Apple's specifications for the range of operating temperatures. Those specifications apply to the ambient environment in which you operate the computer. In other words, Apple recommends against using your computer if your room temperature is at 95 F or above, or below 50 F -- temperatures that would be uncomfortable both for you and the computer. Of course some people such as photojournalists do productively use their MBPs in extreme environments such as the Sahara Desert or the upper slopes of Mount Everest, but I'm sure they understand they are reducing the life expectancy of some of the components, such as the hard drive in the computer.
    A temperature of 115 F or higher on the metal strip behind the function keys is perfectly OK. You don't need to touch that strip to use the computer. My criterion is whether the parts that I need to touch remain comfortable -- the keyboard, trackpad and wrist rest areas. They do on my computer, although the left wrist area can reach body temperature after extended use.
    In my opinion the recommendations to remove and reapply thermal grease fall into the Urban Myth category and do not make technical sense. And performing that "fix" will likely void the warranty and an AppleCare policy, should you subsequently have a logic board or CPU failure. The "fix" will be immediately visible to Apple service folk should the computer have to be sent in for repair.
    No, you are not doomed. My CPU temperatures after hours of operation generally run in the 40 to mid-50 C range, depending on what I'm doing. At the moment CoreDuo Temp is reporting 48 C. Continuous 100% load of both processors for extended periods results in CPU temperatures in the 60s-70s C, which is well below the maximum continuous operating temperatures specified by Intel.
    The SMART disk temperature of my 7,200 rpm hard drive has always been reported by Hardware Monitor to stay well below the operating temperature maximum of 55 C recommended by Seagate.
    So I expect to get years of useful service from the MBP.
    Both because I like the tilt for typing and because it provides an additional heat sink to cool the computer in heavy use, I use an aluminum tilt stand whether the MPB is on my desk or in my lap. I use a KoolSink because it's very portable, but there are many laptop stands that work well.

  • MacBook Pro Display Issue

    I have a macbook pro since April, 2012, So far I had no issues. However, today the screen has turned blueish and pixelated. I could still use it without any issues however, the display seems to be still there. I have tried restart and Command + Option + P + R key restart option also. If anybody had a similar issue and was able to resolve it on their own ?

    I'm not sure why you'd say that since I mentioned in the OP that I was able to run the computer fine via ADR.
    Regardless, I've since found that my MBP was part of the "NVIDIA" debacle, and as such, is eligible for free repair by Apple.

  • Macbook Pro Key repeat problem

    I've had my MacBook Pro for almost 2 years now but it's recently started to have keyboard repeat issues. The keys are not physically stuck but behave like they are, in a totally random manner - including the delete key and the space bar. Messages will end up lookinggggggg a bittttttt like thissssssssssssss. Very annoying.
    This tends to be accompanied by a sluggish trackpad too. Then after a while - it behaves normally again.
    I have nothing else attached - anyone any ideas?
    Thanks
    curlydog

    I've been having an occasional key repeat problem for a while, I'd say for a year. I'll be typing, and then I'll stop, and the last key I pressed starts repeating and keeps going until I press another key. I've also seen it miss characters sometimes. This happens more often than a key repeating by itself. I'll be sure I pressed a key, but I get "wrds like ths." Maybe I'm just not pressing a key "deep" enough. Sometimes I've tried typing a bit slower and that seems to help.
    I regret not bringing my laptop in for someone to look at earlier, but I've been very busy for the last couple years. The problem hasn't occurred often enough to make it a problem that I felt compelled to solve right away. It just feels like an annoyance, like, "Come on. This shouldn't have made it off the line like this!" I don't want to start a "war", but I had a Windows laptop before my Mac and I never had these problems with the keyboard. There are other attributes I like about my Mac, so it's annoying but not a big deal for me.
    I usually run VMWare Fusion 2.0, and I've suspected that it's a culprit. The problem doesn't just occur on web pages, though that's where I usually notice it when it happens. I've seen it in TextEdit as well. What I notice is it happens when I've got something else running in the background taking up CPU time. Maybe the computer is swapping to/from disk. Sometimes I've seen it happen on a web page with some slow Javascript on it, again taking up CPU time. It seems to me it's a matter of the hardware or software missing the signal from the keyboard. Perhaps it's related to the "keyboard sleep" problem, which I've also seen, where the keyboard and trackpad just go dead. In this case I put the computer to sleep for a bit and then wake it back up. That brings both back for a bit, but it usually reoccurs, in which case I reboot it.
    I've been hoping that Apple would come out with a patch for the key repeat problem. So far I haven't seen it. Would an upgrade to Snow Leopard fix it?

  • MacBook Pro 17" Issues

    I love the hardware and am sorry I have to run XP Pro on it, but that is my life.
    My new Macbook Pro is here! I have been loading everything on it and all is well except for the following:
    Issues that need resolving:
    1. No audio from headphone jack
    2. No delete button so task manager under windows cntrl/alt/delete....how to do on the macbook pro?
    3. Closing lid does not put to sleep but freezes machine in a state of attempting to go to sleep...any recommendations?
    Besides all that, no heat, no whine and I am the envey of all who see my machine!!!
    Any feedback is much appreciated.
    sony vaio notebook   Windows XP Pro  

    Issues that need resolving:
    1. No audio from headphone jack
    2. No delete button so task manager under windows
    cntrl/alt/delete....how to do on the macbook pro?
    3. Closing lid does not put to sleep but freezes
    machine in a state of attempting to go to sleep...any
    recommendations?
    Hi keys,
    Delete button is in the upper left side of keyboard. To quit or close programs, Apple-Option-Esc.
    Runs Software Update in System Preferences, until all your software is up to date.
    Repair Permissions afterward. Applications-Utilities-Disk Utility. Highlight Macintosh HD in the left hand column. Click on Repair Permissions.
    Reset the PMU for sleep problems.
    http://docs.info.apple.com/article.html?artnum=303319
    Reset PRAM
    http://docs.info.apple.com/article.html?artnum=2238
    The first thing I do when I get a new Mac is a clean install of the OS. This way I know I have a perfect install. If the above don't help.

  • MacBook Pro boot issue (constant rebooting / won't boot from DVD)

    Hello all --
    I have read a few other threads that have similar issues, but slightly different.
    Today I went to get a new internal HD for my MacBook Pro 15"... just swapped it out at the store and put the old one in an external enclosure. No problem there. Got home and went to put the OS on the new internal HD. The MBP would not boot from the OS X 10.5 DVD. Weird, I thought. Tried a few more times - holding down the 'C' key, the 'option' key and so on. Each time it failed to boot -- it would just reboot after getting to the grey screen (no Apple). However, the machine would boot from the old HD in the external enclosure via USB port. Everything appeared normal, the DVD mounted and the new HD showed up in disk utilities - and I was able to format it ... tried rebooting to OS X DVD with no luck
    Luckily I have an iMac as well, I put the MBP in target mode and was able to install 10.5 onto the new HD. Tried rebooting. No luck. Got a flashing folder with a ? mark. Once again tried various tricks to get it to boot - safe mode, single user mode etc. I tried resetting PRAM and the SMU. Nothing. I am at the point now, where the new HD with a fresh OS install won't boot -- it just keeps rebooting after flashing to the grey screen briefly. OS X DVD will not boot the machine, but the external USB drive (with the old HD) will boot the machine.
    I did try putting the old drive back into the MBP, but the machine failed to boot.
    I am at a total loss.
    Help, thoughts, suggestions?
    Thanks,
    Michael

    Seems to consistently work with the old HD inside the MBP and not the new drive.
    There is an OS installed on the new drive (it shows up in Startup Disk preference, and when holding down option key at startup).
    The new drive will show up as an external when it's in an external enclosure connected to the MacBook (the old one back inside the MacBook).
    I did format GUID and Extended (Journaled).
    The MacBook Pro 15" unibody late 2008 2.4GHZ -- this one: http://support.apple.com/kb/SP499. It has 4GB RAM, the 250GB 7200 RPM drive.
    The new drive is a 750GB Seagate Momentus 2.5 7200RPM 16 MB Cache Interface.
    Never had any issues with the machine previous to this.

  • 17" MacBook Pro Heat Issues

    Hi everybody, I recently got a 17" MBP but have been having some issues with heat. I have been looking into the issue online on various message boards, have read extensively on the thermal paste idea (though have not opted to attempt this yet), etc. My serial number is W8621, so it is not a very early model afaik. I have been using the computer daily for good amounts of time, at first on my lap, but after that became unbearable, on a hard surface. I do have the SMC update. I hope I am not forgetting any important information.
    Anyways, I have been struggling with the heat which I have recorded using Speedit and CoreDuoTemp to be between 65 and 75 degrees C idle and exactly 90 degrees load (using yes > /dev/null, I know some people argue over if this really stresses the system to the max, but for my purposes I think it shows my problem well enough). I have even recorded a peak temperature of 94 degrees C, or a scorching 201 degrees F. All of this translates to an untouchable case at various points including the bottom, the left side, and the keyboard (both the bottom near the space bar and the top near the F keys). I know these machines will and do run hot, but I think that mine is running especially hot and I am looking to ideas on what to do. Though I probably would have no issue redoing the thermal paste I would rather go through more official ways of fixing the problem. I did get Applecare with the computer so I have plenty of time to take it in, but I was wondering what if anything they could do, because last I have heard they don't really acknowledge the problem.
    Anybody with similar issues want to share their experience and what they told Apple was the problem? I don't want to go into my Apple store only for them to tell me the paste is not an issue, or the heat is within spec, or that there is nothing they can do.
    As if this wasn't enough, it seems that I have developed the 'whine' problem over the past day or two. I first heard about this problem a day or so after I got the MBP, but never noticed it or heard it even when trying to, so I thought I got by with a working one. However, over the past day I have noticed a high-pitched sound that varies in pitch slightly but is on almost all the time, with slight pauses ever 20 seconds or so. This occurs with the power cord plugged in, as it has been since I have got the machine. I have not had the computer unplugged for an extended period of time (over an hour) since I got it. I have not attempted any fixes, and honestly don't want to, but again if this is a decent reason for them to check it out I would appreciate any advice. It is gradually going from noticeable to annoying, and I am starting to get upset with my otherwise beautiful and perfectly working computer.
    Thanks in advance for any help! If you need me to post anything else just let me know, I really want to take care of this before I take it to school in the fall.
    17" MacBook Pro   Mac OS X (10.4.6)  

    Maximum PC Magazine had an article about the MacBook Pro's heating problems in the May 06 issue. They basically said that after opening the case up, they noticed that Apple was applying a huge chunk of thermal paste between the CPU and the cooling element.
    Applying too much thermal paste to the CPU is actually bad. It will act as an insulating barrier causing heat to build up rather than dissipate through the cooling element.
    So after they scraped off the thermal paste gunk, they reapplied some Artic Silver (the best thermal paste on the market) to the CPU and noticed about a 10 degree Celcius decrease in temperature.
    Apple's only official response to overheating has been that sometimes people forget to take off the packaging tape covering the vents.
    http://www.neowin.net/index.php?act=view&id=33508
    Anyway, food for thought....

  • Macbook Pro keyboard issues

    I'm having some issues with the keyboard of my new macbook pro. It seems some keys don't work correctly on some occasions, and I end up missing specific letters when typing, "L" and "E" being particularly problematic. I've also noticed that the keyboard on the macbook pro is not as "soft" as on my old powerbook. Any ideas guys?

    Actually as a brand new MacBook Pro user I am having the very same problem. All keys including the one below the track pad are much "tighter" than with my Powerbook. I also experience difficulties with two letters typed quickly after one another. It seems that the reaction time of the MBP keyboard is much slower than it used to be on the PB.
    I am quite a fast typist and also experience that I type several letters which do not appear on the screen immediately but only with a few seconds of delay. This is rather frustrating when typing larger texts.
    Any comment from Apple on this would be highly appreciated.

Maybe you are looking for