Macbook pro stopped displaying full resolution on Dell U2713HM monitor
Hey guys,
I'm using the late 2013" retina Macbook Pro with OSX Mavericks.
I've been using a Mini DP to DP cable to output full 2560 x 1440 on my 27" Dell U2713HM.
One day while I had that monitor plugged in, I also plugged in my HDTV via HDMI for an extra screen. When I did that, it set my Dell to 1080p and ever since then I cant seem to change the resolution back to its native res.
When I go to the display options for this monitor, under "Scaled Resolutions", the entire section is blank. It gives me nothing to choose from. I've restarted my computer a few times, plugged the cable into the other Thunderbolt port, nothing.
I've tried new cables and went to the Apple Store and they did a PRAM reset. It seemed to work fine when they hooked up a Thunderbolt display to it. But I just cant get my Dell to go full res again. I tried the first cable on another mac and a PC and both let me view it in full resolution. Just not my Mac.
Any advice? It makes no sense why it was working perfectly fine for a long time and then completely refuses to do so only on mine.
I have the same setup - late 2013 macbook pro with Dell u2713hm. I've tried connecting with both a mini dp cable to dp (as included with the dell monitor) and also a hdmi cable and I get a strange result - I get full resolution but it looks terrible - pixalated and faded.
I also have a macbook from around 2009 which I can connect using a dp-dvi adapter and then the dual dvi connector that came with the monitor. It gets a lower resolution but actually looks better.
Any ideas? Have you seen this issue with your setup (which seems the same as mine).
Thanks,
Similar Messages
-
Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?
You can try using Screen Sharing in the Sharing preferences. Or try a third-party utility such as ScreenRecycler.
-
Why does my Macbook pro 2008 not recognize my external dell flat monitor(TV)?
Hello all ,
Its hooked up with a dvi cable from mac dvi port to dell monitor dvi port. My macbook is running mountain lion.
The Monitor light on the front blinks green and then goes into " power save mode" a black screen.
Thanks for any ideas on how to get this external monitor working.Reboot, then try this
http://www.ehow.com/how_5811316_connect-macbook-dell-external-monitor.html
I'm really guessing here actually since no one answered your post.
You might find better luck searching on Google "Macbook pro plus Dell monitor" for the most recent information.
The SwitchREsX is supposed to be very capable and enable more resolutions for other monitors besides Apple ones.
I think you can hold option/alt when clicking on Displays in System Preferences for a more complete list of options.
Sorry I can't be of more assistance. -
Retina MacBook does not display full resolution in apps
Hi everyone,
I was trying to run a few games, urban strike and tribe to be exact and when I set resolution to 2880x1800 only top left quarter comes on, I cannot see anything else. Tried with 1440x900 resolution and still getting same results. I don't know if apps are trying to scale but I cannot run them full screen. Running windowed mode works just fine. My resolution is set to Best for Retina, I also tried using resolution changer to set the screen to 2880x1800 and still seeing the same result in the full screen apps, any ideas?Hi there joemoto,
You may need to adjust your display resolution. Take a look at the article below for more information.
OS X Mountain Lion: Adjust your display resolution
http://support.apple.com/kb/PH11462
-Griff W. -
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?
How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in high resolution without any problem. Any advice would be much appreciated. Thanks.
There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
Mylenium -
The Logic Board of my MacBook Pro Retina Display stopped working.
I purchased my MacBook Pro Retina Display 13 months ago. Barring a few errors the computer functioned beautifully, and I maintained it with the care it deserved. On Wednesday, last week, the laptop ceased to work completely. It wouldn't start, or charge. On submitting it for repair, I was informed that the logic board failed. Since its warranty lapsed a month ago, $1050 is required for its replacement. That outrageous amount is more than half of what I paid initially for the laptop. The service provider would not agree to any concession, or plea.
For an Apple enthusiast, it is very disheartening to learn that its foremost product stops operating in this manner. I am a high school senior, who has accustomed himself to his computer, and cannot at this time purchase a new laptop, let alone a Windows laptop. With college admission deadlines fast approaching, I solicit your help and suggestions, very desparately.As much as it will suck to hear this answer, there really is no solution. Because the computer is now out of warranty, you have to pay the full $1050 to get the logic board replaced. I know this is a large sum of money, but you have to remember that the logic board includes the CPU, Graphics Card and RAM, all soldered onto the board. You're paying to replace all of the most expensive components of your computer, even if only one of them failed.
So, long story short, you'll have to either pay to replace the logic board, because it's out of warranty, or buy a new computer. -
Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?
vinay.sujan wrote:
Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?
Well there are two or three causes of eyestrain with displays different people seem to have.
1: Small type/UI elements
2: Glossy screens
3: Flicker rate
1:
The higher pixel rate combined with the display set at the higher resolution is going to cause UI and type to be smaller and harder to see. In fact it's advised to set OS X to a lower resolouton so it upscales better to match the pixel of the higher display.
Reports coming in say watching HD 1920 x 1080 trailers on the anti-glare 17" is best as the pixel content matches the display almost fullscreen, where on the MBP-R it's upscaled and thus looks blurry.
HD content makers are NOT going to change all their video cameras to support 2880 x 1800 full screen, so in order to get a clearer image playing HD 1080 content, one will have to do so in a smaller window.
2:
The new MBP-R dispalys are 75% less glossy, but not 100% less glossy like the anti-glare models so this can still cause some people problems. This can be lowered to under 1%, however I'm suspecting to do so would be considered giving up a military advantage to China where Apple gets it products made.
3:
I don't know about the flicker rate if it's better or not on the MBP-R's than the previous screens. -
Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?
If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.
Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem. -
Macbook Pro Retina display laptop to Dell 1409X projector doesn't work
Macbook Pro Retina display laptop to Dell 1409X projector – I use OSX 10.9 & I've cabled from my thunder port (mini display port) via apple's adapter to a vga cable to a Dell 1409X projector. But the projected display is different from the computer display. The cursor is controlled from my trackpad, but is only seen in the projection display. Also the dock items are only seen in the projection display. But when I select any application (ex, Word file or a jpeg image) it is only seen on the laptop. Meanwhile the projected display shows items from my screensaver, always different from what is shown on the laptop.
Thanks for any help.
EarlHi earlherr!
Try using the information in this article to help you troubleshoot this issue with your connection to an external monitor:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I have a white vertical line down the right side of my internal brand new macbook pro 13" display
I have a white vertical line down the right side of my internal brand new macbook pro 13" display. I've done the following:
-Shutdown the computer, and restarted in Safe Mode by pressing the Shift key after the restart tone
-Shutdown the computer, and restarted by pressing Command, Option, P & R after the restart tone
-Checked display resolution, Best for Retina
-Hooked it up to a Dell external monitor and via projection to screen. There are no lines on the external or secondary screens
-Just curious, I ran a color utility which can not repair 4 items, maybe this is another issue.
This is a brand new Macbook Pro, just out of the box. It was fine for two days without any issues, fine last night while in use, opened it up this morning with the line.
Anyone now how I can fix this on my own?
Details atta
<Edited by Host>If you are within the first 14 days from the date of purchase, return the MBP for a refund or an exchange. If you are after the first 14 days of the date of purchase, have the MBP repaired under the warranty provisions.
Ciao. -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
Need help connecting Dell U2713HM monitor to MacBook Pro
What is the best way to connect a Dell U2713HM monitor to MacBook Pro OS 10.7.5 to maximize the resolution 2560 x 1440? I was using a VGA adapter on my old Viewsonic monitor that hooked into the Thunderbolt port, I think. When I use my old adapter with the new Dell monitor, it stops my Mac from responding and the monitor says it has no DVI connection. When I unplug the adapter from my Mac, it starts working again. I'm not very good with all these port options and descriptions so talk real slow, please.
1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP
1 DisplayPort 1.2 (DP)
1 High Definition Multimedia Interface (HDMI)
1 Video Graphics Array (VGA)
1 USB 3.0 upstream port
4 USB 3.0 downstream ports
Thank you! -
Is the Macbook Pro Retina display better than the LED display on the new iMac that is coming out?
I am thinking of either buying the Macbook Pro retina display (15") or waiting for the iMac 27" display. I am mainly focusing on the display, so what is better?
vinay.sujan wrote:
Is the MacBook Pro Retina display resolution of 2880-by-1800 a strain on the eyes as I understand the higher the resolution the more strainful the screen can be to the eyes?
Well there are two or three causes of eyestrain with displays different people seem to have.
1: Small type/UI elements
2: Glossy screens
3: Flicker rate
1:
The higher pixel rate combined with the display set at the higher resolution is going to cause UI and type to be smaller and harder to see. In fact it's advised to set OS X to a lower resolouton so it upscales better to match the pixel of the higher display.
Reports coming in say watching HD 1920 x 1080 trailers on the anti-glare 17" is best as the pixel content matches the display almost fullscreen, where on the MBP-R it's upscaled and thus looks blurry.
HD content makers are NOT going to change all their video cameras to support 2880 x 1800 full screen, so in order to get a clearer image playing HD 1080 content, one will have to do so in a smaller window.
2:
The new MBP-R dispalys are 75% less glossy, but not 100% less glossy like the anti-glare models so this can still cause some people problems. This can be lowered to under 1%, however I'm suspecting to do so would be considered giving up a military advantage to China where Apple gets it products made.
3:
I don't know about the flicker rate if it's better or not on the MBP-R's than the previous screens. -
Macbook Pro Retina Display hard crashes - not caused by Google Chrome
Hi, all. This is my first time posting on these forums, and it is only due to the unsurpassed amount of frustration I have had with my mbpr. I received it in late August, and it worked great. Yes, I had the waking from sleep problem, but that got fixed in an update and didn't bother me too much. What did bother me was when I started installing my games.
I play a ton of games, I have Steam, Diablo III (which Apple during their keynote said is compatible with the retina display resolution and worked with Apple on making it so), WoW and others. Anytime I play any game, it pretty much crashes and I have not been able to find a single solution.
I have tried disabling graphics switching, installing 3rd party programs to disable graphics switching and uninstalling them again, using an external monitor and the built in retina display, verifying/repairing permissions, setting a cap on the FPS in a game as to not make my laptop hot at all (even crashed with a 30 FPS cap), re-installing OS X Mountain Lion from recovery, resetting the NVRAM...
The computer just locks up, goes into a sound loop (like a record skipping very quickly), and becomes totally unresponsive to anything except a hard reset. On wake, it will always display "Your computer has shut down because of a problem, would you like to open the applications blah blah". Basically asking if I want to start where I left off. It never gives an option to send a report to Apple.
Oh also, it can sometimes crash when it's just remotely warm? For example, when I was re-installing OS X ML from recovery the FIRST time (I did it twice), it crashed mid-installation!
The funny thing is, I have windows 7 installed via Bootcamp. Whenever I play any games on that partition...100% fine. No problems, handles graphics beautifully. Using the OS for anything else such as watching videos, downloading music or movies, using any applications is fine. It just seems to be games (or a very small amount of heat? I'm not sure).
Any suggestions? I'm completely stuck on finding any solutions. My experience with the Apple store has been awful in the past, and going to them with any problem is a last resort for me. In the past, I have been able to solve many problems on my own with enough googling and forum digging.
This, after months, is still unsolvable for me. Thanks for any help you might be able to provide.
15" MacBook Pro Retina Display, Mountain Lion 10.8.2, 2.6 ghz i7.
tl;dr: Macbook crashes everytime I play a game or when it gets warm, I'm not sure, help.Sorry that no one answered your question the first go-round - sometimes these things just slip by us.
Most people would have probably just recommended taking your machine to your local Apple Store.
Which is what you did - and all is well now, I'm assuming?
Clinton
Maybe you are looking for
-
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/sof
-
Prime Infrastructure: Can you export Alarms and Events?
Hello In Prime 1.4, you had the ability to export the alarms and events you saw being reported, at least according to the PDF manual: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-4/configuration/guide/pi_14_cg.pdf I want to ex
-
Gcc issues /usr/lib/libstdc++.so.6:could not read symbols
Error i get when compiling an openGL, bullet program. I just started getting this on both my arch computers after updating. gcc Timer.o Ball.o main.o -I/usr/include -lGL -lGLU -lBulletCollision -lBulletDynamics -lLinearMath -I/usr/include/bullet -L/u
-
In my printer simulation, I want to display a dialog box that shows the print status. It should consist of a title bar with the X button, and a message. This message will update each time I change the string it uses. An OK (actually I'd prefer a Clos
-
Resource Search in cProjects 4.0 not fetching results
Hi All, Working on cProjects 4.0, I have specified the qualifications catalog and selected a few items from the catalog for a role. These are the items I have set for the resource (Business Partner). However, when I do a 'Resource Search' at the fron