MacBook Pro to Hdmi no audio

I purchased a rocket fish hdmi to mdp adapter. I was able to get the video working but no there is no sound. I went to sound settings and saw the setting for Samsung HDMI audio and clicked it. I get a messages audio not supported. I am using a mid-2011 MacBook Pro.

You need to use the audio out (headphone out) from the MBP to get sound to your TV. The cable needs to be 3.5mm male stereo (to plug into your MacBookPro) and whatever is needed by your TV on the other end (usually a pair of 1/4" RCA connectors).

Similar Messages

Macbook pro to hdmi video/audio output TV

I Bought a mini display port to hdmi cable, to play dispaly my desktop on my LCD TV. the display works just fine, but there's no sound. I try to follow the steps in youtube, but the problem is, there's no sound output detected. Any ideas on how to solve this? Because, what i know is that hdmi can both deliver hdmi video and audio.

Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B04
SMC Version (system): 1.69f1
Serial Number (system): < Edited by Host >
Hardware UUID: 471C7865-ED80-5DDB-9047-1B7C731CA1B9
Sudden Motion Sensor:
State: Enabled
See i AM getting the hang of using my Mac LOL. i probably couldnt have done that wiv windose.
< Edited by Host >

Macbook pro A1286拔掉hdmi后没有声音

macbook pro A1286连接HDMI看电视，拔掉HDMI线之后，mac没有了声音。
系统偏好设置->声音->里面只有“数码输出_光数码输出端口”这个选项，怎么重启都没声音，连接耳机有声音，拔掉耳机mac还是没声音。
macbook pro A1286 HDMI connection to watch TV, then unplug the HDMI cable, mac no sound.
System Preferences -> Sound -> there is only the "digital output _ optical digital output port" option, how to restart no sound, connect to headphones with sound, unplug headphones mac still no sound.

Your Macbook Pro will not support sound vis HDMI. You will have to tap the audio output port and connect to the TV audio inputs for sound. You will need a 3.5 mm plug in a 'Y' connector configuration with RCA connectors on the other end.
Something such as this:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=64939 12&csid=_61
Ciao.

Using MacBook Pro as Digital Optical Audio bridge...

I have an idea for my MacBook Pro, but I'd like to know if it's feasible before I go and buy what I'd need to test my plan:
I have an Xbox 360 with digital optical audio out (TOSlink), and I have a MacBook Pro with digital optical audio in (through the 3.5mm minijack on the side. So far I'm A-OK.
Now, I'd like to know if I can have the Xbox's output go into the MacBook Pro's input, and route that audio signal through the MacBook Pro to either (a) the stereo output of the MacBook Pro, or (b) (preferred) my 5.1 decoder on my Griffin FireWave.
Every time I use the Xbox, I have to unplug the audio from my speakers to the Griffin FireWave, and that's a pain because the wires are all behind my desk. If I could route the audio through my MacBook Pro, then everything would be perfect. Is this possible?
And if this isn't possible, can I use an old iMic adapter I have laying around to route the audio through the MBP?
Thanks for your help!

I found a program called LineIn that allows 'software audio pass through in to out,' but I don't think this will pass the 5.1 channel audio through to my FireWire-connected Griffin Firewave.
Does anyone know of any way this can be done? Do you think the Audio/MIDI Setup Utility application can be of any use with this? Or is there a way to pass the digital signal straight through to the Griffin?

Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

You could try updating your apple TV and then restarting it. Bit of a guess.

Does my mid 2010 macbook pro's displayport support audio (in addition to the video I know it supports)?

I have been using my displayport to drive a video only HDMI input by way of a displayport to DVI converter followed by a DVI to HDMI converter. It works great but of course there's no audio at the end of that chain because DVI is a video only connector.
That made me wonder... is my displayport outputting both audio and video which could be converted directly to HDMI (giving me both audio and video at the HDMI end)? How can I tell if my mid-2010 macbook pro's displayport connector is outputting both audio and video? My internet search is inconclusive about whether both are available on that connector for my mid 2010 model macbook pro.
Thank you.

Hi, these MacBooks of 2010 support Audio through display port:
MacBook Mid 2010 (GeForce 320M)
MacBook Air 11 inch 2010 or 13 inch 2010 (Core 2 Duo)
MacBook Pro 13 inch 2010 (GeForce 320M)
MacBook Pro 15 inch 2010 or 17 inch 2010 (GeForce 330M),
No 2009 Macs support audio through DisplayPort
All 2011 and latter Macs support displayPort audio
so it looks like you can get audio if yo have the Macbook with Geforce 320M

Macbook pro to hdmi

hey i have late macbook 2011 core i5 13 inch macbook pro
model a1278
i want to connect it to projector and tv with hdmi output
if i buy the thunderbolt to hdmi adapter will that carry sound
thanks in advance and new to apple discussions

Mid 2010 and newer MacBooks Pro can transfer audio over Mini DisplayPort, so you will get your audio transferred to your TV or projector. Read > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US

Macbook Pro Wireless HDMI capability?

I have read that using a device that plugs into your TV's HDMI port you can stream HD audio and video from your laptop to the TV.
To do this the article said your laptop would need to have "wireless HDMI capability".
Does the new Macbook Pro have this capability?

Perhaps there will soon be a combination of MBP and some sort of external third-party adapter that will enable this capability in the future, but to the best of my knowledge it doesn't exist now.

Macbook pro via HDMI to panasonic ae2000 projector not working.

Hi
Last night I tried to connect my mid 2009 macbook pro to my panasonic ae2000 projector.
I have a mini dvi to hdmi adapter lead.
The macbook pro display would flicker when hdmi plugged in but the projector would not come up as a display device. (in display preferences) So I could not output signal too it.
I have used used same lead to connect to a philips tv without problem via hdmi.
Any ideas ?
thanks

Hi
I think its aprox 8 meters. (10 M max)
Its the same cable I use from my normal panasonic dvd/bluray player to the projector.
Except of course I unplugged player to plug in mac, (have used cable again without problem.)
Interesting thought though.
Not sure I have a 2 meter cable (projector on ceiling) to see if I can plug that from mac to projector.

MacBook Pro DVI-HDMI 1080p doesn't work correctly

Hello,
I've just bought new Samsung LCD TV LE40B550. This TV is Full HD and support 1080p. I've connected it via DVI (macbook pro) -> HDMI (TV) cable. It works ok, when I set 1080i. But when I set up 1080p, it shows few dots (pixels) on TV not correctly. The picture is not that good as 1080i. Shouldn't it be reversely? The 1080p should be 1080i, shouldn't be?

You probably want to post this in the MacBook Pro forum:
http://discussions.apple.com/category.jspa?categoryID=190
There is a sub forum just for displays, video out, and video accessories.

My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

Macbook Pro 2013 HDMI Monitor Goes Black for a few seconds

So I purchased a brand new Macbook Pro 2013 (specs below) and for the entire time I have been using it with a BenQ RL2455 via HDMI with no problems at all. Recently though I have started to experience problems between the computer and the monitor. There is no particular sequence as to when this will happen but the monitor screen just goes completely black for a couple of seconds, and then goes back to normal.
There is nothing to suggest that the monitor is being disconnected from the mac, as it still detects the fact that the two are still connected. I have followed each cable back to the source and they all seem to be properly connected.
As you can imagine, this is very annoying and inconvenient, and it would be much appreciated if anyone knows any solutions to this. I just thought i'd see if there was anything i could do before i contacted apple, just incase i was being a total idiot and missing something obvious!
Thanks!
Specs:
Macbook Pro Retina 2013
2.6GHz Intel Core i7
16GB Ram
1TB SSD

15" or 13"? How long have to had it?
I've noticed my HDMI monitor comes up blank on reboot sometimes. Using a late 2013 MBP Retina 13" for a couple of days now.

Macbook Pro does not play audio part of video

Hi,
I have a Macbook Pro (early 2013 with OS 10.10.1).
A colleague sent me a video file, which was originally recorded in MTS format. The sound portion of it does not play on my machine, although it generally can handle MTS. I have a colleague with a Windows PC, for him the audio plays ok. I have another colleague with an older MBP, for him the audio also plays ok. But then I have two more colleagues with a newer MBP like me, and for none of us the audio plays at all. The strange thing is that I can open the file in various editors such as Premiere, Audition, or Logic Pro, and they would all show the waveform of the audio, even the VU meters react normally, but there still is no audible sound.
On the machines that play the sound, we have tried converting the video and exporting the audio portion into various other formats, but with the very same result. None of them play sound for me. This is extremely weird and we have no answer what could be the problem.
Any help would be very much appreciated.
Thanks a lot & best regards,
Rainer

Hi Eric,
thanks for the reply.
As I said, we had tried several editors and players, as well as all kinds of formats, using all kinds of converters, but so far to no avail.
The AAC codec is a common codec for the Mac, so there should be no need to convert it. I have videos with that codec that play ok. It already turned out that converting the video file to other formats does not make any difference.
But thanks anyway,
Rainer

Hi how do i get video to show on macbook pro i only have audio playing

how do
get video to show i only have audio playing on macbook pro

You are going to have to give us a lot more information than that. We need to know what MacBook Pro you have. What version of OSX (these things should be in your profile). What are you trying to do. What program. What kind of video. We are completely incapable of guessing what's going on, so if you want an answer, you need to give us information.

Macbook Pro Compatibility With M-Audio FW410 audio interface

Folks, my old trustee PowerPC G5 recently blew up and hence I'm now switching all of my Logic / Audio setup to my Intel, Macbook Pro laptop.
2 questions for you all...
1. Why does my Macbook Pro not seem to recognise my FW410 interface (just flashes blue light at me) despite attempting to update the interface's driver (tried a few different options, none of which work)
2. Presuming I can get it to work with my Macbook Pro, will the FW410 function, like it did previously using my G5. without the need for a power adapter, or will I need to use the 12v adapter? It's impossible to say right now as the Macbook Pro won't even acknowledge its existence!
Much appreciated if there's any help you can throw my way.

I find the creative suite to be painfully slow on my MBP (17" C2D 2.33Ghz, 2GB RAM). Of course it does depend how heavy you are using it. But basically I cannot use photoshop or AE under mac OSX, it drives me nuts. FOr light projects I just switch to parallels, they usually work smoother running under parallels with only 1GB RAM allocated to windows. ANd for serious stuff I switch to bootcamp so they get the full 2GB... cant wait for CS3!

MacBook Pro to Hdmi no audio

Similar Messages

Maybe you are looking for