Macbook Pro won't connect via DVI

Hello all,
My Macbook Pro suddenly won't connect to any monitor using a DVI connection. If I use a VGA monitor (via my DVI to VGA connector), everything is dandy, but connecting directly to a (i.e.) Samsung or an Apple Monitor via DVI, the OS just blinks once (like if there is a connection), but the display is not being detected and is not turned on. I tried to delete all display preferences and I've zapped the PRAM without any result.
Before I send the powerbook in for repair (my fear is that it's the DVI-connector that's broken), I just wanted to see if there's anybody out there who have had similar problems, that perhaps could be solved via software (i.e. the system)...
Cheers,
Massimo

I am having the same problem as the rest on this thread. My VGA works fine in most cases, but my DVI will not work with any amount of prodding. Also, I have been trying to make use of matrox dualhead2go's and triplehead2go's, but these will not function correctly unfortunately. I got the whole logic board replaced a year after I got this laptop because it had strange display issues (the old red/blue square problem) but I'm far out of warranty now.
I am a student and a video artist requiring use of multiple projectors for my final mfa thesis project..but this is really going to mess up my plans if there isn't a free/cheap fix..anyone have suggestions for speaking with tech support/customer relations?

Similar Messages

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Macbook Pro won't connect to wireless printer anymore suddenly

Suddenly my Macbook Pro won't connect to my HP Photosmart B210e Printer. I have tried adding it via IP address, it worked but I can't print anything. It says the printer is busy and idle? I updated the software and drivers. All other computers and devices in my home connect just fine. It is connected to our wireless router as is my laptop.
I have searched online and done all the solutions I could find and nothing is working. VERY frustrated as I have to log onto my Dell to print anything.
Thanks in advance for any help!
Kim

"It says the printer is busy and idle?"
System Preferences>print and Scan. What is the staus of the printer? Green light for idle or yellow light for in busy? Have you tried power down the printer and paowering it back up?

How do I print from wifi-connected MacBook Pro to printer connected via USB to Win7 PC?

This is really frustrating, and I did not think that anything could be this difficult on a Mac. I have a Windows 7 Home Premium desktop PC connected via ethernet cable to wireless router, and a printer connected to the PC via USB. I recently bought my first ever Mac - a MacBook Pro, which is connected via wifi through the same router. All I want to do is to print files from the MacBook Pro on the printer connected to the PC. I have spent a LOT of time searching all over the web. Have tried some 2 or 3 different methods but none of them work for me, e.g. I shared the printer on the Win7 desktop and then added the printer on the MBP with the IP option with LPD/LPR Protocol, after enabling LPD Print Service on the PC. The printer gets added but when I give the command to print from the Mac, the print job shows up on the printer queue but the "Printing" soon changes to "Error Printing" (or something like that) and nothing gets printed. Then, I have to switch off the printer, remove the print job from the queue and switch on the printer again to get it out of the error state.
I also tried setting up the printer on the MBP using CUPS Admin interface, i.e. localhost:631. Again, printer gets added but document does not print. The third way I tried to add the printer was using the Windows option in the Add Printer dialog, and typing in an smb: URL but no luck with that, either.
Please, can anyone help me? This is driving me crazy
Oh, and the devices are:
1) Windows 7 Home Premium Desktop PC
2) MacBook Pro running OS X Mountain Lion
3) HP Deskjet F2110 printer
Thanks...
- Ajoy

First Install Bonjour for Windows on your Windows machine. This will allow the printer to be discovered.
http://support.apple.com/kb/DL999
Then use this article:
OS X Mountain Lion: Set up a printer shared by a Windows computer via SMB/CIFS

My MacBook Pro won't connect to the Internet, but my phone and PC will.

My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Macbook Pro won't connect to WIFI

Help! My new Macbook Pro won't connect to my home's existing WIFI network. The other computers (PCs) are running on it without a problem but when I try to join the network it rejects my password as being incorrect, though it definitely is the right one!

Check to make sure the Caps Lock is off.
What type of wireless security are you using? If it's WEP Mac's don't do WEP anymore and you will need to change it to WPA or WPA2.

MacBook Pro won't connect to safari

New MacBook Pro
won't connect to safari. All other devices on the wifi network work fine.

Hi Mcm65,
Sorry to hear you are having issues connecting to the internet with your Macbook Pro.
Try the steps in this article first:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
- Judy

MacBook Pro won't connect to home wifi, but will connect to other networks

Help! MacBook Pro won't connect to home wifi but will connect to other networks. Others can connect to my home network. I've tried diagnostics, resetting the router, restarting my computer, and forgetting the network and then trying to access it. Nothing works.

Hey Brittany,
Welcome to Apple Support Communities.
It sounds like you’ve done quite a bit of troubleshooting to try and resolve the issue with your MacBook Pro not connecting to your Wi-Fi network. If you haven’t already, take a look at the article linked below which provides some additional troubleshooting suggestions that may help you resolve the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
So long,
-Jason

My macbook pro won't connect to my airport extreme

My Macbook Pro won't connect with my airport extreme network....the extreme seems to be working fine....Any thoughts? I ahve tried diagnositics and assistant....thanks

OOPS...it actually says "Incompatible security". Any ideas? I had no problems connecting to my other wireless network at home.

Macbook Pro won't connect to Android Phone via Bluetooth (Tether)

I am trying to set up the "Tether" app that will turn my Android phone into a wifi hotspot. I have a Macbook Pro running 10.7.3.
I've done everything suggested in the Tether setup, for using an Android Phone with a Macbook.
Problem seems to be with Bluetooth. Using the Bluetooth setup assistant, I am able to successfully pair the computer and phone, or so it seems. The phone shows the pair, and the computer says yay, we're paired.
However when I exit the assistant, the phone is shown as "not connected" in the list of connected Bluetooth Devices.
I see from searching forums that there have been similar Bluetooth connectivity issues with audio devices such as speakers.
Has anyone been able to successfully troubleshoot?
Has anyone set up Tether successfully with a Macbook and Android phone? I have a Samsung Nexus S 4G. Yeah I know, time for an iphone. As soon as the contract is up in June.

I don't think you have to change anything on your home network. It is your MBP that is confused - it appears your computer is trying to connect to the network at your mother's place.
I suggest you go to System Preferences / Network and delete all the networks. (Select the name on the left and click -)
Then restart the computer and setup the network connection as if for the first time. You can use the Assistant to guide you.
(All of the above assumes you are running Yosemite. The details with older OS may be different, but the basic idea is the same for any OS.)

MacBook Pro Won't Connect to the Internet

Hi hi. Okay, I've noticed this unusual behavior in my MacBook Pro (Intel Core Duo, 2.4 GhZ, 15-inch, probabl 2 months old now) just last night. It connects to the wireless network but will not load any webpages. If I type in www.google.com or so, it says Contacting "www.google.com" and it stays on it and the page remains blank. I'm writing this from my MacBook which seems to connect fine to this wireless network. The problem persists in the MacBook Pro when I'm on XP (boot camp) and when I'm on Leopard. I've restarted the machine and everything but it still occurs. Prior to me discovering the problem, I think the MacBook Pro was asleep for 2 days (in XP).
I've opened Network Diagnostics in Leopard and it detects the wireless network and everything but then it says it needs a WEP password. But the MacBook can join this same network without a password. I access the university network (from a dorm) so while you don't have to have a password to connect to the internet, you only log in when you open an internet browser and then sign in with the student ID (but its not the WEP password, if that makes sense). Basically, I can't acess the internet if I don't log into the internet and of course even the university login page won't show up. Can anyone please help me? It's driving me nuts. Thanks!
P.S.- I've been hearing other MBP users having this problem but I don't know if I installed the Airport Update, and restarting doesn't help either.
Message was edited by: GStreakT

GStreakT:
Your OS is shown as 10.4.7, but most people who are having problems similar to yours have later versions of Tiger or Leopard. If you're running a later version than 10.4.7, please update your settings for this.
Some people, including me, have found that setting the router to "G-only" mode solves the problem (at least until Apple fixes the problem in a software release.) Please post a reply or email me as to whether this works for you.
TIA

MacBook Pro won't connect to wireless network unless tilted

Hi! My MacBook Pro occasionally has trouble connecting to the wireless network in my house, but that can usually be solved by turning Airport off and then back on. Today (very suddenly), Airport disconnected from my network and could not find it again. I tried restarting my MacBook Pro and router multiple times. Finally it was able to connect, but here's the thing: it only works if my MacBook is tilted at an angle. If I try to open a webpage while the MacBook is sitting normally on a flat surface, the page won't load. If I lift one side of the MacBook so that it's tilted at a 45 degree angle, the page will load. Once it's level again the internet will stop working and the Airport signal bars will turn gray.
I've never come across a problem like this before. Everything was running fine this morning. It is so strange and I have no idea what to do! Help, please? Is my Airport dying? Is something loose inside? My MacBook Pro is about 4 years old.

Delete your network from system preferences, network, advanced.
re enter your network you wish to join
If that fails then do a PRAM reset
http://support.apple.com/kb/ht1379
and a SMC reset
http://support.apple.com/kb/HT3964
Maybe something to do with the motion sensor
if so try resetting the SMC

Macbook Pro won't connect to the Internet anymore.

I am posting on behalf of a friend.
She has a MacBook Pro 13" Early 2011 model. She can connect to Wifi and Ethernet cables fine, But when it comes to using the internet it won't work.
She tried Safari, Firefox and Chrome, and other software that uses internet connectivity doesn't work.
We used different internet connections, restarting the Laptop but it wouldn't work.
She upgraded to Mac OS X Yosemite, see it would fix the problem but again, nothing.
The Odd thing about it is that she has two account in the MacBook Pro, The Other account being her sisters, does get internet connectivity and browses the internet with no problem.
We made a new account and see if that would do the trick but still does the same thing. No internet connection.
Any suggestions how to fix this?

I tried re-installing Mountain Lion 10.8.3 but it didn´t help.
Assuming your can access email ok ?
First, install the OS X Mountain Lion Update v10.8.4 (Combo)
Then restart your Mac. That will reinstall any missing system files.
Then try Safari.

MacBook Pro won't connect to the internet after standby

Hallo all,
I have the following strange problem with my macbook pro:
- after going in stand by and returning in operating mode the mac won't connect to the internet, I have to follow the procedure in order to retry to connect but It does'not work. Go in network preferences, try to change the DNS, use and not use DHCP and so on but nothing change.
- Mac is working in ethernet, I can see other macs and pcs
- When I change the network to connect, same problem even if I turn off the mac.
I have the same problem with Iphone !!!!
I have linksys router and modem but I think that the reason could be a setting in mac.
Anyone can help me???

I tried re-installing Mountain Lion 10.8.3 but it didn´t help.
Assuming your can access email ok ?
First, install the OS X Mountain Lion Update v10.8.4 (Combo)
Then restart your Mac. That will reinstall any missing system files.
Then try Safari.

Macbook Pro won't connect to Airport Express, period.

So I just got this brand new Airport Express a couple of days ago, and I've had the darndest time trying to get this thing to work with my cable modem. I've conducted a number of experiments, and have performed factory resets on the airport more times than I care to talk about, but so far nothing has worked. Here is what I've gathered so far:
1) No matter what, whenever I try to connect to the Airport Express' wireless network, I get a connection timeout or some other error. This happens whether I attempt connecting via the Airport Utility, or manually using the airport icon in the toolbar.
2) As a result of #1, it's completely impossible to configure my airport express wirelessly, because when the Airport Utility tries to connect it just ends up giving me an error.
3) As such, I have tried configuring the airport express by hooking it up to my computer via ethernet cable. Once I do that, I am able to configure to my heart's delight, but then when I plug the Airport back into my cable modem, I am once again no longer able to connect wirelessly because of connection timeouts.
4) My connection timeout issues happen whether the Airport's light is solid amber, flashing amber, or solid green. They would probably still happen if the light was fuchsia or cerulean. As far as I can tell, the status light makes no difference whatsoever.
5) I have the most up-to-date firmware on my airport express.
6) I have the most up-to-date version of the Airport Utility.
7) I have run an ethernet cable directly to my laptop from my cable modem and the internet works fine, so the problem is not coming from my ISP.
8) My laptop (15" Macbook Pro running OSX 10.5.8) is able to connect and maintain connections to other wireless networks without any problems.
I'm at a loss. All I want is wireless internet. It can't be that hard, right?
Help!
Thanks in advance.

I had a similarly perplexing experience today. My AE - which I have been using trouble free for months - was blinking amber this morning after a particularly heavy download session. Usually a modem restart fixes the problem...but not this time.
After many many resets I was completely unable to connect to the modem wirelessly. I was able to connect when connected to the AE over ethernet. However after applying settings to the AE I was unable to connect wirelessly or over ethernet.
Setting the AE to use 802.11n (a compatible) did not immediately fix the problem, but I've no doubt that I would still be without luck if I hadn't applied that setting. However after removing all previously stored Preferred Networks, shutting down the computer and modem and then connecting the AE to modem and restarting everything I got green lights on the AE.
My computer still could not "see" the AE using the Airport Utility. The network did appear in my network list tho, so I selected it and was able to finally join the network. Only after joining the network did Airport Utility pick up the AE.
That's almost 3 hours of my Saturday afternoon wasted, but I'm just glad to have wireless internet again.
The key here appears to be configuring the AE while connected via ethernet and then trying out the various settings while it's connected to the modem.
It ***** trying to debug internet-related problems because you clearly need the internet to debug them! (ed: wow, suck* is a banned word!)
Message was edited by: kjvarga
Message was edited by: kjvarga

Macbook Pro won't connect via DVI

Similar Messages

Maybe you are looking for