Macbook Pro wont print color on Savin

So at my office we have a shared Savin C3528 printer.  It took me forever to just figure out how to connect to my computer and now that I did, it wont print in color.  HELP!!!!  Its really annoying having to ask other people to print for me

Did you ever solve your problem?
Which driver did you install in order to print from your mac to the C3528?

Similar Messages

  • 2008 Macbook Pro wont print through Airport Extreme

    Hi,
    We recently got an airport extreme and have our printer (Epson Stylus NX400) plugged into the USB port. My computer (2009 MacBook Pro running 10.6.8) will print wirelessly fine but hers (early 2008 MacBook Pro running 10.5.8) will not. Plugged in it will print just fine but it is a hastle to unplug the printer from the airport and plug it into her computer any time she wants to print. When she tries to print wirelessly, the print command goes through but then doesn't show up on the print que. The only difference I see between our computers when we print is hers pulls up some information from Epson regarding ink levels when plugged into the printer. Any help is appreciated.
    Thanks,
    Harrison

    here is one thread:
    http://discussions.apple.com/thread.jspa?threadID=391986&tstart=0
    Have you guys tried updating to 10.4.6
    I believe they addressed some airport issues in the update.
    Also you could download the firmware update
    http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate10.html
    But I believe that just updates your firmware to work with boot camp and doesn't really do anything else.

  • How to get my macbook pro to print in color?

    how can i get my macbook pro to print in color?

    Attach a color printer (either directly to your Mac or to your Home Network) set it up correctly, and choose Print from the File menu.
    A more specific answer would require you to supply information about your Mac, your Mac OS X version, your Printer, your attachment method, and the version of the Driver you are using.

  • Macbook pro wont connect to internet using cable, but connects using wifi fine

    My macbook pro wont connect to the internet using a cable, but connects using wifi fine.  I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

    Can you open a terminal and invoke the following commands:
    ping -c 10 localhost
    and
    ping -c 10 google.com
    You should normally get something like:
    PING google.com (74.125.224.103): 56 data bytes
    64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
    64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
    64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
    64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
    64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
    64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
    64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
    64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
    64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
    64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

  • How come my macbook pro wont play dvds?

    how come my macbook pro wont play dvds?

    Don't know!
    Please describe in detail all you have attempted to do in order to resolve the issue.
    Apple Portables: Troubleshooting the slot load optical disc drive

  • New macbook pro wont accept password

    I moved everything over from my i5 MBP to a new i7 via utilities migration assistant. However the new macbook pro wont accept my password, nor will it recognise the other user account passwords. Works fine on the i5.
    In Disc Utilities, change password asks me to select an image, but does not light up "change" when I select user.
    Any ideas?

    Is you new MBP the 2010 model or is it a newer model running Mountain Lion?
    If it's a newer model running ML, you can simply boot into your Recovery partition (hold down the Command and R keys whilst booting) and when you get to the Recovery window, select Terminal from the Utilities menu. In Terminal, type
    resetpassword
    and hit Return. A small app will open that will allow you to change the password for the user that you select. Then just reboot and use the new password.
    If, indeed, you're running 10.6.4, you'll need the installation disc to use the Reset password utility.
    Good luck,
    Clinton

  • HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    Well, you could install the drivers to the wireless printer in you other computers.
    blue apple > System Preferences... > sharing
    check printer sharing.

  • How do I customise my macbook pro to print at A1?

    How do I customise my macbook pro to print at A1?

    http://support.alltrails.com/support/articles/27397-printing-custom-paper-sizes- with-a-mac

  • I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    Try resetting the printing system:
    OS X Mavericks: Reset the printing system
    Next try deleting the system and reinstall the printer..
    BTW this is Mac Pro desktop forum

  • How do I set up my MacBook Pro to print via wi-fi to my printer

    How do I set up my MacBook Pro to print via wi-fi to my printer?

    It is rather hard to know how to help you since, among other things, you didn't tell us what printer you own, what you've tried thus far, and what happened when you tried it. Your printer came with documentation and it may have even come with a disk that takes you through the process step by step. My first two suggestions are that you (1) make sure you know the password and SSID of your wireless router. You'll definitely need the password and you might need to know the router's ID name. (2) read and try to follow the instructions that came with your printer. In general, I've found that Canon and HP instructions and setup software are quite good while Brother wireless printers, at least in the past, have been rather flaky to set up (but work fine once that initial headache is dealt with).

  • Macbook pro wont shutdown

    macbook pro wont shutdown

    Holding the power button for 10+ seconds should shut it down.  But that stops all processes, including active read/write activity, mid-step.  Yuor system may not restart because the OS (not the disk drive itself) could be corrupted.
    Try option-command-esc to bring up a list of application to force-quit, that way only certain applications are forcibly stopped instead og the entire OS.

  • My macbook pro wont do anything and it is just blowing air out the back

    my macbook pro wont do anything it is using its fan rapidly

    Try Reseting the PRAM, It should fix the Problem.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
        Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/HT3964

  • HT5219 When I close the lid on my MacBook Pro the print on the thunderbolt display gets very small & hard to read. How do I prevent this?

    When I close the lid on my MacBook Pro the print on thunderbolt screen is very small & hard to read. If i keep the lid open on the MacBook Pro the print is big and easy to read. How do I prevent this from happening?

    Hi JanStran,
    You may need to check your Display settings and/or resolution.
    The article below explains how to used Clamshell mode "closed display" on your Macbook Pro, versus "mirroring."
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    Hope this information helps ...
    - Judy

  • Macbook pro wont shut down without holding the power button nor cycle for updates to restart.

    macbook pro wont shut down without holding the power button nor cycle for updates to restart

    Sorry I said sorta wrong. I can shut down and I can update to the point of restart but it just sat for 45 minutes after an update. It goes through the update and to restart then the bars chase each other in a circle and it never restarts. So I hit the power button and go through normal reboot but loosing the update in the process. It does not matter how long I wait for a natural reboot after an update or click to restart it will chase the little bar in circles all day literally and never reboot.

  • My MacBook Pro wont charge or turn on? any ideas what to do?

    My MacBook Pro wont charge or turn on? any ideas what to do?

    Welcome to the Apple Support Communities
    Try resetting the SMC > http://support.apple.com/kb/HT3964 If it doesn't work, you have a hardware problem, so you have to take your computer to an Apple Store or reseller to get it diagnosed and repaired

Maybe you are looking for

  • After upgrading to Mavericks, iPhoto does not work

    I have an iMac early 2011, with dual hard drives. After upgrading to Mavericks, iPhoto and several other apps are no longer "installed". The following apps have a white circle with a line through it in my main Applications folder on my primary hard d

  • 3 week old Macbook Pro 2011 now has dot in middle of screen?

    I bought my Macbook pro 2011 Hi-res 15" Glossy - Configured to Order  3 weeks ago from the Apple Online Store. After installing and playing a game this week, I notice that a grey dot appeared in the middle of the screen, especially noticeable when br

  • TFTP command under solaris 10

    I use tftp in solaris 10,like follows: $ tftp tftp> connect 127.0.0.1 tftp> ls ?Invalid command tftp> put a.txt Transfer timed out. I want to know if I need to configure tftp under solaris 10,if need,how to configure it? how to show directory and fil

  • Capturing constant value data entered at query filter

    Hi, I have two tables one is Customertab and other is Customerver. Customertab has two columns customerid and customer address customerver has two columns customerid and customer version For example in customer version table Customerid 100 has 2 vers

  • Query on Master datasource enhancement

    Hi BW Experts, We have Employee master datasource i.e 0EMPLOYEE_ATTR.In extract structure of 0EMPLOYEE_ATTR  i saw customised fields prefix with YY . Can i see these fields  in BI Server as Infoobjects with same prefix YY? .But i am not able to see t