MacBooKPro, I can switch the power on and off, but booting takes for ever
I am a new Mac user and have had this machine for a couple of months and in the learning stage. Yesterday I had downloaded some mp3 songs and were trying to play them with itunes, individually they would open but i couldnt import them to the music library. I noticed the machine slowly and by this morning, it has crawled to a stop. I can switch it on and off, but when i switch it on, it takes a long while for the apple logo to come on and then it takes ages for the screen to appear and when i click on something it takes many more minutes for it to open. So in fact I am frozen out, since i cannot open anything...but the machine can be powered on and off.
do you think that there is a relationship between this freezing and the mp3 downloading and trying to play it with itunes?
what might this be? Can any one help me with some advice. The apple support is closed for the night so i cant even call them. Thank you so very much...
Hiya Ibncochini,
welcome to Apple discusions, if you can power your book on, can you open "Activity monitor"? (found in applications/utlities).
What may have happened, is that itunes is still trying to import the files. Now, also, whilst the threat of viruses is not as bad as on Windows PC's, I always scan my "new arrivals" (i.e. all files, even music files purchased from the apple store) with clamxav , which is a basic, but free;
But for the moment, I would not suspect anything harmful, other than that an application is trying to run something. (your logs should reveal, found in console )
Hopefully, your activity monitor reveals the offending application that e.g. takes all the processor power and you can click on it and "force quit" (from the Activity monitor menu).
It might also be a good idea to look at +verbose mode+ which will tell you what is happening during the booting up.
Any of the above any good?
Similar Messages
-
I have just tried to update my iphone 4 to iso 6, it got almost all the way through then froze. the only screen i get now is with the itunes icon and picture of a usb cable end. I can turn it on and off but not reboot or do anything else. Further more the computor now does not recognise the phone being connected/disconnected. Help please!
Follow the troubleshooting steps shown in item #5 at the bottom of this article: http://support.apple.com/kb/TS1538, under "If the device is not recognized while in recovery mode".
-
I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.
Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again. -
recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi
Obvious question... where did you buy your 4S and is factory unlocked?
-
Is there an App for turning the power on and off with the Iphone 5 as my button has stopped working
Is there an App for turning the power on and off with the Iphone 5 as my button has stopped working
No. You'll need to bring your phone to Apple for evaluation and replacement. If you're still within the warranty period and a hardware defect is identified, the phone will be replaced without charge.
-
sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain
FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again. -
power light goes on the immediately goes off, screen show apple then goes black without turning onn
You can try disabling emoticons and image previews in your IM appearance settings in your Skype options to see if that changes anything. Some people running Windows XP have had odd graphical and resource issues with versions of Skype above 7.5. The alternative solution would be to downgrade to Skype 7.5 for the time being. You can find links to 7.5 in the thread below. http://community.skype.com/t5/Windows-desktop-client/Skype-7-6-crashes-on-startup/m-p/4031560/highlight/true#M353247
-
Most of the time when I wake up my apple tv, the white light will come on, but will not blink when I have this problem. I then have to pull the plug and then put the plug back in the socket, then it will work.
How long have you had it? If it is still under warranty, you can have Apple help you out completely. If it is not under warranty, Apple might still be able to send you articles to assist you in this manner. Check "Contact Us" on any page at the bottom.
-
i deiecde to restore a back up i had made before so after i did that i notioced all my notes and pics anything thart happend after that preivous back up. and know i dont know where all my new files, images, etc have all went. so i need help to recover my new files that are All gone now someone please if their is a way to reverse this so i can have all my media back someone plase they are verey important pic. thank you god bless
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
Cheers, Tom -
My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync. -
Where we can assign the form J_1IEWT_CERT and program
where we can assign the form J_1IEWT_CERT and program which we customized for the standard program J_1IEWT_CERT (name same as the form name ) .
Can anybody please tell me I did the customization for both the form and the program now where I can assign them.
****the form is used for TDS certificate
Regards
MaveIn the NACE tcode select the application and then click on output types and then select the output types and then processing routines.
-
i have recently purchased a macbook pro and i gave my macbook to my wife, how can she recover the apps i bought and paid for so she can use the Pages, Numbers and Keynote
If you bought/paid for them in the Mac App Store, you would just need to sign in to the MAS with the Apple ID you used to purchase them, go to purchases, and click install.
As for the limited licensing that Bordy brought up, the TOS for the MAS states:
"Apps from the Mac App Store may be used on any Macs that you own or control for your personal use."
If you installed them from an iWork disc, just pop the disc back in and reinstall.
Regards,
Gnomish8 -
my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??
Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?
Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2) -
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.
Maybe you are looking for
-
How do I get apps to appear in the Library section of itunes
I've been to 'edit > preferences' on the general tab & checked the ones I want but they don't appear... There is no ok or apply button so I have to click the X in top right.... Not sure what else to try... Any ideas please? Cheers in advance CB
-
Can I give custom extensions to my image file? I want to secure my image file such that it can only be opened by my application. Is that even possible?
-
Passing java parameter to javascript function in oa framework
hi all, can anybody tell how to pass parameter to javascript function from java for example OAMessageTextInputBean txtbean = (OAMessageTextInputBean)webBean.findChildRecursive("BuyerPrice"); String row = "rowid"; txtbean.setOnKeyUp("javascript:checkN
-
Password at service level.
hi Experts, I want to ask user his user id and password at service level, ie if he opens a particular service he should be asked for user id and password. Is this possible ???? Is there any standard functionality that can be used for this purpose ???
-
Airport has the self-assigned IP address...
I've read about 100 of these threads online however none of them have solved my problem unfortunatley. I've had my Macbook for just over 4 months now and it never gave me problems until about 2 weeks ago. I opened up my macbook to find I didn't have