Machine not running the correct deployment type

I have an application; Office 2013, with multiple deployment types.
These deployment types each install Office with a different MUI.
The requirements on the deployment types are 'Organizational Unit' must be one of xxxxx
I have my final deployment type (i.e. lowest priority) as English, so if it isnt in a foreign OU then English will install.
However, it seems that machines are just running the English one?!
In appIntentEval.log it sees both versions as applicable but runs the English one...
Is the highest priority; 1 or is that the lowest!?
I have English as 13 out of 13.... i.e. a catch all.
Have I got it the wrong way around?

The clients start to evaluate DT with prio 1 and will move on to DT (prio 2 - if DT1 is not applicable and so on ... ).
DT13 will be installed if no requirements are met (DT 1 - 12) - given that there are no requirements on DT13 or if they are met.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Error: JAR did not have the correct media type

*** Error ***
A problem occured during deploying application from http://127.0.0.1:1267/Video.jad
Reason:
JAR did not have the correct media type, it had application/x-java-archive
E:\Documents and Settings\MatLab2.R\My Documents\NetBeansProjects\Video\nbproject\build-impl.xml:202: exec returned: 1 BUILD FAILED (total time: 3 seconds)I encountered this just once when I run the sample code from JavaFX here using a mobile emulator. This code is for adding a media player. After that one time, the output doesn't contain error messages anymore and the screen just goes blank.
What does this error mean?
I used:
JDK / JRE 6 u 18
Netbeans 6.8
JavaFX 1.2 SDK
KLite Codec Pack Mega 583

Hi!
I had the same problem as you did. I just found that the problem is that we only add the type JAD to the mime types, but we also have to add the JAR type.
Just add the following line to the mime.types file and it will work:
application/java-archive jar

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

TABLE(CAST()) function not returning the correct results in few scenarios.

I am using TABLE(CAST()) operation in PL/SQL and it is returning me no data.
Here is what I have done:
1.     Created Record type
CREATE OR REPLACE TYPE target_rec AS OBJECT
target__id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
targe_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Created Table type
CREATE OR REPLACE TYPE target_arr AS TABLE OF target_rec
3.     Created Stored procedure which accepts parameter of type target_arr and runs the Table(Cast()) function on it.
     Following is the simplified form of my procedure.
     PROCEDURE get_target_weights
     p_in_template_target IN target_arr,
     p_out_count          OUT NUMBER,
     IS
     BEGIN
          SELECT count(*) into p_out_count
     FROM TABLE(CAST(p_in_template_target AS                     target_arr)) arr;
     END;
I am calling get_target_weights from my java code and passing p_in_template_target with 10140 records.
Scenario 1: If target_pct in the last record is 0, p_out_count returned from the procedure is 0.
Scenario 2: If target_pct in the last record is any other value(say 0.01), p_out_count returned from the procedure is 10140.
Please help me understand why the Table(Cast()) is not returning the correct results in Scenario 1. Also adding or deleting any record from the test data returns the correct results (i.e. if keep target_pct in the last record as 0 but add or delete any record).
Let me know how can I attach the test data I am using to help you debugging as I don’t see any Attach file button on Post Message screen on the forum.

I am not able to reproduce this problem with a small data set. I can only reproduce with the data having 10140 records.
I am not sure if this is the memory issue as adding a new record also solves the problem.
This should not be the error because of wrong way of filling the records in java as for testing purpose I just saved the records which I am sending from java in a table. I updated the stored procedure as well to read the data from the table and then perform TABLE(CAST()) operation. I am still getting 0 as the output for scenario 1 mentioned in my last mail.
Here is what I have updated:
1.     Created the table target_table
CREATE Table target_table
target_id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
target_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Inserted data into the table : The script has around 10140 rows. Pls let me know how can I send it to you
3.     Updated procedure to read data from table and stored into variable of type target_arr. Run Table(cast()) operation on target_arr and get the count
PROCEDURE test_target_weights
IS
     v_target_rec target_table%ROWTYPE;
     CURSOR wt_cursor IS
     Select * from target_table;
     v_count NUMBER := 1;
     v_target_arr cws_target_arr:= target_arr ();
     v_target_arr_rec target_rec;
     v_rec_count NUMBER;
     BEGIN
     OPEN wt_cursor;
     loop
          fetch wt_cursor into v_target_rec; -- fetch data from table into local           record.
          exit when wt_cursor%notfound;
          --move data into target_arr
          v_target_arr_rec :=                     cws_curr_pair_entity_wt_rec(v_target_rec target_id,v_target_rec. target_entity_id,
                    v_target_rec.dd,v_target_rec.fd,v_target_rec.code,v_target_rec.target_pct,
     v_target_rec.template_nm,v_target_rec.p_symbol,v_target_rec.pm_init,v_target_rec.template_name,
     v_target_rec.template_type,v_target_rec.template_caption,v_target_rec.sort_order);
          v_target_arr.extend();
          v_target_arr(v_count) := v_target_arr_rec;
          v_count := v_count + 1;
     end loop;
     close wt_cursor;
     -- run table cast on target_arr
     SELECT count(*) into v_rec_count
     FROM TABLE(CAST(v_target_arr AS target_arr)) arr;
     DBMS_OUTPUT.enable;
     DBMS_OUTPUT.PUT_LINE('p_out_count ' || v_rec_count);
     DBMS_OUTPUT.PUT_LINE('v_count ' || v_count);
END;
Output is
p_out_count 0
v_count 10140
Expected output
p_out_count 10140
v_count 10140

Certificate does not contain the correct site name

Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
 display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
 showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
 display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
 if (c == exitCommand) {
 destroyApp(false);
 notifyDestroyed();
 } else if (c == getCommand) {
 Thread th= new Thread (this);
 th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
 try {
 int len = 0;
 int ch = 0;
 System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
 is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
 } catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
 try {
 is.close();
 } catch (Exception ce) { }
if (c != null) {
 try {
 c.close();
 } catch (Exception ce) { }
display.setCurrent(t);
}

re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

Can not run the J2EE application on webless iAS

Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.
Now I can run the simple servlet sample, but I can not run the Helloworld
application that I deployed follow the guide. The error message was: socket
receive error (RecvBuffer 1)

Don wrote:
Hi:
I have installed iAS on Salaris, and installed a webconnector on IIS which
hosted on different machine.Wow, I did not know that iAS support IIS as the web server. I think SP3
will
allow you to use Apache as well as iPlanet's web server, but I not think
IIS is
supported. Perhaps you should use a supported web server.
Kent

Identifying the correct MIME type for file uploads

How does Apex identify the MIME type of an uploaded file? I have a page that uploads a file and accesses it via APEX_APPLICATION_FILES. That works fine. The problem is that, for certain file types, the mime_types column is "application/octet-stream" instead of the correct file type. I think it's using the Content-Type from the client browser, though I'm not quite sure. Is there any way to override this server-side in Apex?
I'm running Apex with mod_plsql. Adding an AddType directive to Apache and adding the correct association to the mime.types file did not work.

Hi,
I also noticed this - it seems that Microsoft's 4 char extensions like .docx are not being recognized by application type so that either the web server or mod-plsql is defaulting to the "application/octet-stream" mime type which refers to a file with binary content - instead of the traditional "application/msword" mime type you would expect.
If you know, at the point of insert into your database table, both the mime type and file name, one workaround would be to check if the mime type is 'application/octet-stream' and the file's extension is ".docx" or other likely extensions and then treat it as mime type 'application/msword", etc.
Not really a solution but might be sufficient workaround depending on your situation.
Ted
Edited by: Ted Martin on Oct 25, 2012 7:27 PM

PP Procedure is Missing, Can not Run the Preprocessor

hi experts,
while executing some module program through TCODE. I got this error PP Procedure is Missing, Can not Run the Preprocessor
can any one help me ?
thanks,
nag.

Hello,
What I thought you meant when you said "Port" was that you were using a Distribution project to move it to other machines. Therefore you have two options to proceed.
1) Copy the nicppaiu.dll from the system folder on your machine to the system folder on another machine you are "Porting" to.
2) Add a project to your solution that is a Setup project. Then add the output of your application to this project and add the MSM discussed earlier. This will create a MSI that can be used to install your application on multiple machines (it still requires a NI-DAQmx install).
There is a good topic in our help named "Deploying Measurement Studio Applications" that tells you everything you need to know.
Regards,
Jeff

Could not determine the correct port

Hi Folks!
I can't start the EM, when I type
$emctl (status, stop or start) dbconsole, the follow message is displayed:
Could not determine the correct port
Please, help me to correct this problem.
Regards,
Wilson

user490256 wrote:
Hi Folks!
I can't start the EM, when I type
$emctl (status, stop or start) dbconsole, the follow message is displayed:
Could not determine the correct port
Hi Wilson,
What is Oracle version.
Was it running fine earlier ?
How did you configure dbconsole ..
Are you any error in trace files..
To change the dbconsole port ,
How to change ports for DB Control 10.2.x.x [ID 395755.1]
http://yogeedba.blogspot.com/2008/02/manual-configuration-of-dbconsole-em.html
Regards
Rajesh

My storage is not showing the correct space

Hi,
Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Reindex Spotlight then check the storage > Spotlight: How to re-index folders or volumes

My mac had it's original software re-installed by Apple. since they did this, my airbook pro will not recognize my iphone in Itunes, and I cannot update the latest version of itunes, because it says I'm not running the latest version mac software????

I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software. When I go to update my software, it's telling me I'm running the latest version??? HELP!!

you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to run Iphone 5

I do not have the correct version of the flash player, but when I follow the steps to download it, it still doesn't work in Firefox. (It does work in Internet Explorer)

Every time I click on a video icon, the response I get is that I cannot play the clip because I do not have the correct flashplayer. However, when I click to download it, nothing changes. I even tried disabling my security setting but it still did not work. Unfortunately, the troubleshooting help was too complicated for me to figure out. Is there something basic I can do to make firefox work? It does work on Internet explorer, so obviously the correct program is in my computer - it just won't work on firefox.

IE uses a different version of Flash than other browsers use.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del = Processes tab}
3. Then run the Flash setup file from your Desktop.

When I try to save an email attached file, the file name is automatically convertied to "attachment.ashx" although the correct file type is recognized. How do I retain the original file name?

This problem occurred after the most recent update to firefox 8.0.
After right clicking on the attached file, I click on save link as.
The correct file type is recognized. However the file name is converted to "attachment.ashx".
When I rename the file, it downloads properly and is opened by the appropriate program.
However, I should not have to rename each downloaded file.
In particular, this is happening with Word files and with Scientific Notebook (.tex) files.

Cor-el, thank you for your advice. I was able to navigate to my Profile Folder and I deleted the mimeTypes.rdf file. I then closed Firefox and restarted it. The problem was still there, and I found that the mimeTypes.rdf file had been re-created.
I tried your second suggestion, but the files you mentioned were not present so there was nothing to reset.
Any other suggestions?

Policy Trace not returning the Correct policy

Hi Everybody,
Our issue here is that when we run a policy trace on any of our Active Directory users - it does not match the Correct policies and match the Global Access policy although the Trace return right Identity policy
However if i try access an any URL and monitor the activity from the cli OR Ftp Access log - i cann see that the user has in fact had certain policies applied to it.
i think there ara problem in policy trace to fatch the coorect policy form GUI
Does anyone have any suggestions as to how resolve this.
Running the command testauthconfig - completes successfully.
Web Security Appliance Version Information
Model:
S160
Version:
7.5.1-079 for Web
Ahmed mostafa

A TAC engineer informed me a while back that Policy Trace was currently unreliable, and they hope to fix it in the future. I wouldn't rely on it for accuracy.

Alerts not retrieving the correct number of records

Hi,
I have created alerts to run plans. These plans are getting records from DB and populating the ADC. The alerts are getting executed but are not retrieving the correct number of records.
I have created 5 alerts to run 5 plans all in the same time. The error at the "Data Flow service status" window is :
CACHED RESULT
     REQUEST ID: {4EB6B955-96B3-4AF2-B836-6C9F417D47A6}
     EXECPLAN ID: {11372B4D-9ACE-4CFB-831F-11028FF996D5}
     EXECPLAN NAME: xxxx
     FIX COUNT: 0
     START TIME: 6/8/2006 12:00:01 PM
     EXECUTION TIME: 0:00:00
     Sink Records Blocks Disk Blocks Fix Count Hit Count Execution Status
     0: 0 0 0 0 0
Complete - ERROR Error while processing the data for the step 'SQL Query'
This error is seen for 2-3 plans .......
But if i execute the plan manually from design studio there is no error.
So
1. Do i need to change anything in the config files to increase the MAx memory block?
2. Is there any way, the plans can be run one at a time i.e. configure alerts in such a way that if one plan finishes the other one starts automatically? Currently i have scheduled the plans to run at the same time using Alerts..
Please help...
Thanks

Here is one 'culprit' you can verify. Open DesignStudio. You should "--not--" see any grids or icons on (near) the botton status row. If you see them - right click and delete them. These are plans with same_names put in 'locked' state. After you do this. close your design studio.
Note- if you ever open a plan in designstudio, always "save" it and close it (exit). Donot click on window [x] mark to close the appl.
After above verifrication -- restart EnterpriseLink and restart PlanMonitor, verify if everything runs fine.
--sanjeev

Machine not running the correct deployment type

Similar Messages

Maybe you are looking for