Machines with Duplicate SMS UI GUIDs

I hope that someone can help me with my issue.
I started to notice that some of the machines that I have were not installing the configmgr client and that some were showing up in the all devices pool twice, one entry showing installed and active and the other as not installed. I have used a lot of the
links and help articles that I have found to try to correct the duplicate SMS UI GUID's and nothing helped. I think that my issue is the amount of Client licenses that my network purchased, but I am not sure how to confirm that.
Do you happen to know how to find out the amount of CML's that are in use and the total that can be allocated from a PS command?
My reasoning that I think that it is a license issue or CML issue is that I have 3 different device pools and adding up the three pools I get 20 windows 7 machines with correct and working configmgr installs. I have a total at this time of 50 windows clients.
What I noticed is that if I run these steps that SMS UI GUID will change, but it will then revert to a SMS UI GUID that is in use by the 20th machine.
Delete the SMSCFG.ini
Run ccmdelcert.exe
Stop SMS service then restart the SMS service
run Tranguid.exe /R
When this happens I can see that it will create a new SMS UI GUID, but then when the service is restarted again or if I wait long enough the SMS GUID will change the new SMS UI GUID to the previous SMSUID and create a new SMS UI GUID with the same number
as the 20th workstation.
Now to the point where I think that it is a licensing issue is that if I uninstall Configmgr from a working client I can then add one more existing machine and it will work without an issue. When I try to add in a 21th machine it will not install with its
own SMS UI GUID it will use the 20th machine SMS UI GUID.
All of the machines are from a image. I did not install the configmgr client in the image and the image does complete a sysprep after the image completes and I have verified that the machines SID and GUID's are different.
Thank you for any help.

This is what I am seeing, but I am not sure what the root cause is at the moment.
I have two machines with the same SMS UI GUID and then my machine that is working fine. The two machines that share the same SMS UI GUID have the following line in the log that you said to check.
<! [LOG[ [RegTask] - Client is not registered. Sending registration for GUID: 76FF4C21-75CA-4611-A612-E9F522CBA830 ... ]LOG] !><time='07:01:51.231+240' date="04-27-2015"
component="CLientIDManagerStartup" context="" type=1" thread="1596" file="regtask.cpp:1609">
<! [LOG[[Regtask] - Server request reset. Restarting client registration]LOG]!><time="07:01:51.313+240" date="04-27-2015" component="clientIDManagerStartup" contect="" type="1" thread="1596"
My machine:
<! [LOG[Succesfully initialized registration renewal. ]LOG] !><time="10:51:29.034+240" date="04-02-2015" component="clientIDManagerStartup" context="" type="1" thread="1484" file="regtask.cpp:527">
<! [LOG[[Regtask] - Executing registration task synchronously. ]LOG] !><time="10:51:29.034+240" date="04-02-2015" component="clientIDManagerStartup" context="" type="1" thread="1484"
file="regtask.cpp:768">
<! [LOG[[Regtask] - Client is already registered. Exiting. ]LOG] !><time="10:51:29.034+240" date="04-02-2015" component="clientIDManagerStartup" context="" type="1" thread="1484"
file="regtask.cpp:768">
I am also getting this error on the duplicate clients as well as my machine which is working. Unable to find PKI certificate matching SCCM certificate selection criteria 0x87d00280

Similar Messages

Totally at a loss with Duplicates/Triplicates in iCloud on all devices

OK - first, I am not an Apple novice and know my equipment backwards and forwards....but this one has me totally stumped and wondering if anyone has any ideas...
Second -- I have never used MobileMe, so this is not a migration problem....
Third - sync in iTunes is unchecked so I won't get duplicates
So, setting up iCloud -- iPad, iPhone and on my Macbook Pro -- following the instructions exactly one step at a time as given in APple's own instructions...
Sync 1 with iPhone creates duplicates in iCal, Reminders, Address Book on both Mac and iPhone
Sync 2 with iPad creates duplicates in iCal, Reminders, Address Book on Mac, Iphone, and iPad -
Results in duplicates and triplicates in all of them
The only thing not effected is Notes -- which don't seem to sync at all now with iCloud...
Now, to trouble shoot - I've gone through all the steps suggested by others here, and all it does is recreate the problem when iCloud sync is initiated again...
I have even gone to icloud.com and deleted everything there to assure that isn't corrupted.
I closed iCloud on all devices and selected "delete" from the sync options.
I deleted all calendars, reminders, notes, Address books from all the devices.
I restored the calendars, reminders, notes, Address books from TIme machine from earlier in the week - about as accurate as I can get right now with all the messed up iCloud syncs...
Re-establish sync with iCloud and EVERY SINGLE problem with duplicates and triplicates is back...
What the --
Anyone have any ideas at all? I'm going to go talk to the Genius Bar on Saturday (no appointments tomorrow on iPhone launch day), but I'm not hopeful they know more than I do about these things -- so I am turning to the experts here...
AFter spending about 14 hours syncing resyncing restoring resyncing etc. I am not back to a clean tethered-through-iTunes sync, and have found iCloud to be 100% worthless....

Thanks MaxGuru, but that absolutely did NOT do it. That was one of the first things I tried.
OK -- so, I have returend from a TWO HOUR Genius Bar appointment and here is what we figured out: there was NOTHING that could be fixed to prevent the duplicates, not matter which solutions we tired (all those mentioned in the forum, and elsewhere).
What did we do?....First, I have always backed everything up, so I had backups to play with. Make sure you back up everything before you try anything else I mention here (i.e. do an export for iCal, Address Book etc. -- I worked from fresh copies from my Time machine backup from Monday before all this mess started to assure it was as clean as possible.) I put those on my desktop for the time being so we can access them quickly and easily.
Step 1: delete all calendars, address book, reminders, notes from desktop, iPhone, iPad, and iCloud.com (yes, delete it all).
Step 2: put a clean copy of all that data back on your Mac (or PC) from your backup.
Step 3: In iCloud, turn off all calendars that they create that you are not using (work, home, calendar for example are calendars iCloud creates that I have never used since I have created my own and named them MyLastName, Holidays, etc).
Step 3: Turn iCloud off everywhere: on your iPHone, on your Mac, and on your iPad. Make sure you turn off every single feature, not just calendar. Totally turn everything off. LOG OUT OF ICLOUD.COM, DELETE iCloud account on your iPad, DELETE Icloud account on your iPhone.
Step 4: Restore your calendar, notes, address book on your Mac from backup (do not restore reminders - those are gone, never use old ones again, you'll create new down the road -- it just will not sync no matter what from an old copy at this point)
Step 4: Hard-wire sync your iPad and your Mac through iTunes. You'll have to turn on all the sync features. DO NOT sync your iPhone (unless it will be the only thing you sync with your iCloud and mac). Go back into the Info tab and after syncing turn off all the sync features you turned on (contacts, calendars, etc)
Step 5: Disconnect from iTunes
Step 6. Log back into iCloud.com on your Mac. Leave it be.
Step 6B - and this is important: On both your iPad and your iPhone, turn off all calendars that are not yours as per above.
Step 7. Log back into iCLoud on your iPad. Your iPAD will become your primary sync source. Now go ahead and one at a time turn on the address book (wait a bit, check icloud.com on your Mac to make sure it was connected properly). Then turn on the calendar (wait a bit -- depending on how big your calendar is, it might take 5-10 minutes for it to all upload to iCloud from the iPad). Check iCloud to make sure it is there. Same thing with all the other features -- one at a time from the iPad first.
Step 7. From your Mac, go to Preferences>iCloud> and turn on one feature at a time. It should now be okay without any duplicates being introduced. Give it a few minutes to make sure everything remains stable.
Step 8. Now connect your iPhone to iCloud-- be aware this might cause duplicates on your iPhone -- not to worry, there is a way to fix that. Add one feature at a time as you recreate your iCloud account on your iPhone. Start with Address, then then others...
Step 9. Check your iPhone calendar. You might have duplicates on your iPhone. That is okay. DO NOT do any further sync at this time. If you only have one copy of your calendars on your iPhone, you are good to go, and your iCloud connection should now be stable. Step 9B -- If you have duplicates on the iPhone, go to iCloud settings on your iPhone, and uncheck Calendars. When it says delete all on this iPhone, select yes. Wait a moment. Turn your iPhone back on. It should within a few moments push one single copy of the calendar to your iPhone. Now your are good to go.
Why this is such a hassle, is anybody's guess. We literally had two Geniuses at my local Apple Store working on this with me, and we had Apple's Tech Support on the phone the entire time through the process. When it takes about 7 people to correct a simple iCloud tech problem, you know there is something seriously amiss and there will be a lot of problems with people using iCloud for the smartphone features rather than the entertainment features down the road.
Anyway -- hopefull this might work for some of you. If not, good luck in finding your solution.
The overall answer seemed to have been to a) completely delete all old data and backup clean copies, and b) use the iPad DEVICE as your primary inital iCloud sync source. How backward is that, when your desktop/laptop should always be one's primary source.

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Garageband 10.0.1 New track with duplicate settings is not allowing effects in

When I use the "New track with duplicate setting"
It will not allow effects on that new track that was created.
If I just create a new track with the + button it is fine.
The problem is I have already recorded all the tracks and the artists have all gone home.
Anyone know of a work around till this gets fixed?

jonboy5 wrote:
This is the correct way to do that right?
yes, you're trying to do exactly what you should be doing, so now it's time to get to your original problem.
perhaps you can explain in detail what you do, and exactly what happens/what you see/what doesn't work.
i finally had a chance to get on a 10.9 machine and tried duplicating a track in GBv10, it worked exactly as expected here; recreating the effect settings i had, and allowing me to change them as desired

How to install 3G Ipad 2, in Vietnam ipad machine with 3G sim Vinaphone

Dear Admin,
Please guide me how to install 3G Ipad 2, I buy used laptops from the U.S. and two in Vietnam ipad machine with 3G sim Vinaphone, normally I use the Iphone 3 G 4 test levels (on / off) but 2 ipad not have this mode and my computer is ipad 2 Wifi +3 G
Contact: email [email protected]
Thanks !

I do not understand what you mean by test levels?
The iPad us a data-only SIM, not a voice and data SIM that iPhones use.

Agent install with replacement machine with same name

we replace old workstations with new ones with same name, SCCM does not update, it still shows the machine with an active agent, but it never gets installed on the new machine. what do I need to do to get the agent on the new machines?
Pat

Hi,
If you are trying to use autimatic client push it will not install the client that scenario as the computername is already active in SCCM. You could use a startup script in a GPO to always make sure that the client is installed on all computers, Jason Sandys
has written a great one, you can find it here..
http://blog.configmgrftw.com/configmgr-client-startup-script/
In the scenario above you also risk getting a duplicate in SCCM as the new computer with the old name has new hardware.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Controller detected its ip address by machine with MAC Address

Hi
I am getting error "Controller detected its ip address x.x.x.x using my machine with MAC address xx:xx:xx:xx:xx:xx"when i upgrade my Cisco Wireless Controller 5508 from 7.0.116.0 to 7.4.110.0. Any suggestion
Regards

Hi Mohammed,
If you have more then one controller ??
Could be:
1.Error suggest that it hase detected a duplicate address(its managemnet IP address fo WLC) is in used by a client with the mac address xx:xx:xx:xx:xx:xx.
Please chekc the management interface IP on each controller.
2. Looks like u enabled LAG on controller ?
Means you have connected more then one port from your controller to different switches.
regards

I am using iphone 5s, i want to send group sms , please guide how to do group sms.

1 - i am using iphone 5s, i want to send group sms , please guide how to send.
2- how to sync address book with catagory on outlook to iphone 5s. when i sync catagory does not sync , only address book do.
it catagory sync, it we can make group easyly. is it possible.
if not is there any way to get it , as this is very important feature.

Read the User's Guide, it covers basic functionality of the device.

Issue with loading data into cube with duplicate members in different dimensions

Have a cube with allowed dublicate members only in two dims (Period1 and Period2).
Outlines saves with no errors, but when i try to load data, i get some errors:
"Member 2012-12 is a duplicate member in the outline
A6179398-68BD-7843-E0C2-B5EE81808D0B    01011    cd00    st01    2905110000    EK    fo0000    NNNN-NN-NN    2012-12    cust00000$$$    1"
These dims represent two similar periods of time. Am I to change member names and aliases a little in one of them(f.e. yyyy1-mm --> yyyy1 - mm1)?
Users wouldnt like it...
Period1
yyyy1
    yyyy1/q1
      yyyy1-mm1
      yyyy1-mm2
      yyyy1-mm3
    yyyy1/q2
Period2
yyyy1
    yyyy1/q1
      yyyy1-mm1
        yyyy1-mm1-dd1
        yyyy1-mm1-dd2
      yyyy1-mm2
      yyyy1-mm3
    yyyy1/q2
Tnanx

You may have to use fully qualified name something like
[Period1].[2012-12]
[Period2].[2012-12]
You can refer to ESSBASE admin guide on "Creating and Working With Duplicate Member Outlines"
Regards,
Sunil

TVSU fails to install updates on machine with 8.3 filenames disabled

Hi all,
I have experienced TSVU (4.0) failing to install updates on some machines (W7 ultimate 64 bits), but working fine on some other similar equipped machines.
I have now investigated the issue, and browsing through logfiles on a working and non-working machine reveals that system update on one machine extracts the files using the command:
os7005ww_64.exe /VERYSILENT /DIR=C:\PROGRA~2\Lenovo\SYSTEM~1\session\OS7005~2\
Both the "program files (x86)" and "system update" directories has been changed to their proper 8.3 names.
On the non working machine the call was:
os7005ww_64.exe /VERYSILENT /DIR=C:\PROGRA~2\Lenovo\system update\session\OS7005~2\
But this string seems to not be quoted properly when executed, so all the extracted files end up in a new catalog:
C:\PROGRA~2\Lenovo\system
From here all subsequent install calls then fails!
The problematic machine had the NTFS 8.3 filename creation disabled, i think this might be the culprit! I have now changed this to the deafult value, uninstalled TVSU, and rebooted.
But when i now try to install TVSU, it simply refuses It just pops up a windows installer window describing the command switches and exits.
*sigh*
I think the 8.3 filename problem could be the cause of other people experiencing TVSU installer problems, and this should propably be looked at by lenovo?
The failure to install it anew, i haven't figured out yet - anyone???
regards,
Jesper

Hi all
You can verify the status of the short name of the "system update" directory (the primary problem) by doing the commands below. The problem i think, starts when short name generaten is turned off when _installing_ TVSU. then the SYSTEM~1 shortname will not be generated, and the program will revert to use long names, but quoting them wrong!
try:
cd c:\program files (x86)\lenovo
dir /n /x
IF TVSU is installed while short name generation is turned on (short name generated on install) you will get something like:
20-01-2010 20:52 <DIR> .
20-01-2010 20:52 <DIR> ..
06-01-2011 10:30 <DIR> ACCESS~1 Access Connections
18-08-2009 14:11 <DIR> ACTIVE~1 Active Update
18-08-2009 14:19 <DIR> Dipmon
18-08-2009 14:17 <DIR> FPIRPOn
06-01-2011 10:25 <DIR> PkgMgr
25-10-2009 19:14 <DIR> SYSTEM~1 System Update
15-10-2009 15:56 11.264 TVSU_TPC.DLL
Notice the SYSTEM~1 shortname, if installed using no short names, that place will be blank.
As an update i can tell i 'fixed' the machine having problems by enabling the short name generation and renaming, then copying the "system update" catalog, thus generating the short name for it - everything works again :-)
PS: as a side notice on a machine with short names disabled and running as a user with a space in the user name TVSU will not even install, as it messes up with the space in the temp directoy (in the users home catalog)
But somebody really should fix this, as it is very normal to read in tuning guides for SSD drives (Thinkpads with SSD anyone to disable this short name generation among other things...
regards,
Jesper

Installing OBISEONE on machine with already database installed

Hi all,
I need to install OBISEONE software on a machine where I've already got an oracle database (enterprise edition 10gr2) installed.
I'm looking for a guide on how to install on a machine with an existing home! Anyone has any clues?
Install in a completely different folder and home?
Thanks in advance for any hints

Two things -
1)OBISE1 comes with oracle 10 R2
2)OBISE1 does not work well on servers which already have an oracle home and take my word on it , it sounds pretty dumb but I tried this at a client and Oracle got back to me after three days suggesting I choose a virgin machine to install OBISE1 , try it but for me installation froze as it tried to create a listner for the bundled DB.Also if you want to access any help , its not metalink but you have to go through metalink3.
Regards,
Mohammad Farhan Alam

MY system folder, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac) How do I remove them

I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas

pacull,
Use iCal>View>Show Notifications to choose what to do with the notification.

Java threads on machines with hundreds of cores

I don't know if this is the right forum, but I try anyway.
My problem is with java on machines with many cores.
I have some large shared memory machines with 500 cores.
When a user run java programs on these machines java starts 300+ threads which to me seems way too much for the application as the same application runs faster on systems with less cores and memory and without creating 300+ threads.
I have found information about how to limit memory usage, but I have not been able to find any information about how to limit the number of threads java creates nor what criteria java uses to determine how many threads should be created.
In this context threads are the tasks reported under /proc/<PID of java binary>/task on a Linux system.
Thanks
John

Hi,
Thanks for the reply.
We did some more testing and found that java on startup looks in /sys/devices/system/cpu/, which holds information about the 512 CPU's on the system.
We then tried to lower number of allowed processes using ulimit -u 20 and got this error when running the program:
# A fatal error has been detected by the Java Runtime Environment:
# java.lang.OutOfMemoryError: Cannot create GC thread. Out of system resources.
# Internal Error (gcTaskThread.cpp:38), pid=303212, tid=140353923254032
# Error: Cannot create GC thread. Out of system resources.
# JRE version: 6.0_21-b06
# Java VM: Java HotSpot(TM) 64-Bit Server VM (17.0-b16 mixed mode linux-amd64 )
# An error report file with more information is saved as:
# /net/panfsdb0/panfsvol1/simon/projects/cge/test/hs_err_pid303212.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
Now a Google search for gcTaskThread revealed that it is the Garbage Collector that creates the many threads. Google also told us that the number of GC threads can be controlled by the JVM option -XX:ParallelGCThreads=<number_of_GC_threads> . Specifying 8 GC threads the program now runs with 18 threads. Specifying 4 GC threads the program runs with 14 threads.
So it seems like the JVM by default creates as many Garbage Collectors threads as there are CPU's in the system.
This is a very bad practice as on such systems where programs are run within cpusets with just a small subset of the system wide CPU's.
Instead of searching /sys/devices/system/cpu/ for number of system wide CPU's JVM should read /dev/cpuset/<cpuset id>/cpus to see how many CPU's are actually available for the job.
Thanks
John
Edited by: 886656 on Sep 22, 2011 2:13 AM

Move a Excel 2010 Dokument Addin Project (Visual Studio 2012) to another devleopment machine with Visual Studio 2012 , but Office 2013

Hi
we do have the following situation
on computer A there is a Excel Document Addin development project , Visual Studio 2012, Office 2010 installed. All works fine.
we would like to bring the project to another machine with Visual Studio 2012, but Office 2013 installed.
Visual Studio can not build the project. It says that the application is not installed on the machine (though Excel 2013 is installed , but not Excel 2010) It seems to have a problem with the
vbproj.
In other forums I found a hint that "Hostpackage = ..} needs to be set accordingly in the vbproj. I created then a "empty Excel-Addin project" under Visual Studio , looked at
the Hostpackage entry, put that into the vbproj of "problem project. It still does not work.
It would be great if anyone could help.
Thomas

Hello Eugene
Problem is that it says that projectboard (the name of the main project) can not be loaded. All other projects in the solution can be loaded. Strange thing is , now that I try to create a empty excel Project it says that according to Excel security settings
it can not be generated !?
I opened then Excel and set all Trust Center settings to "Default" - but no effect. I really have no idea what is wrong ..!?
Tom

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

Machines with Duplicate SMS UI GUIDs

Similar Messages

Maybe you are looking for