MacMini maximum screen size?

Hi! Does anyone know what the maximum screen size (in inches and/or resolution) is for a Mac Mini?

Many thanks for your help. Not quite sure yet, but just wanted to be sure that if I bought, say, a 24 inch display that the graphics card in the MacMini would cope. Nigel.
Nigel, welcome!
1920x1200
There is no limit on inches.
What kind of device are you thinking of driving?

Similar Messages

  • AIR for Android maximum screen size?

    Hey folks!
    Sorry if this question was already made here, but I couldn't find. Does anyone know if  AIR for Android has a maximum screen size for apps? I have this app developed for 1080p resolution, and my device (CS918 with Rockchip RK3188) is set to 1080p as well. But when I run it through FlashDevelop debug, it downsizes to 720p, still showing in fullscreen. My AIR is version 14.0.
    Maybe it's my device, but since I don't have any other Android devices to test, I can't tell yet.
    Thank you.

    Thanks for letting me know! Here's the main thing I said:
    What you say about fullscreen isn’t correct. That just dictates whether the status bar is showing or not.
    The thing that controls how the stage is scaled is stage.scaleMode. The default value is “showAll”, and under that the stage will scale up so that either the height of the stage fills the height of the dvcid, or the width fills the width, depending on the ratio of the stage and the device.
    “noBorder” is another useful mode. You could design a 14:9 stage and have content near the edges that isn’t vital. The stage would then scale to fill the screen, but would allow some content to go off the edges. It’s easy to support a range of devices, from 4:3 to 16:9, with that single 14:9 stage.
    Some people use “noScale”, and then do all the mathematics themselves to get the contents of the stage to scale correctly. I just let Flash do that for me!
    What moonlight says about calculating the pixels that are visible on a given device is true, and useful. Here’s my function for finding out where the top of the stage falls on the current device:
    private static var landscapewidth:int = Math.max(Capabilities.screenResolutionX,Capabilities.screenResolutionY);
    private static var landscapeheight:int = Math.min(Capabilities.screenResolutionX,Capabilities.screenResolutionY);
    public static function landscapeTopEdge(thestage:Stage){
      return thestage.stageHeight * .5 - (thestage.stageWidth / landscapewidth * landscapeheight) * .5;
    Because I pass in the stage to the function I can use its width and height as part of the calculation. That saves hard coding it for a particular stage size.
    It’s a static function because I have it in a class with other device utilities. I would call it like this:
    var topedge: Number = DeviceUtils.landscapeTopEdge(this.stage);

  • Macbook pro default maximum screen size does not cover the bottom inch

    Kind of frustrated by my new macbook pro.
    At the bottom of the screen, there's the icon bar (icon dock), which is about inch height. I adjusted it to smaller size, about half inch. This is what I did, not sure if related to my problem.
    At the beginning, I thought it was Safari's problem. Later I found all programs has the problem. I'll use Safari as example to describe the problem though.
    When I open Safari, it does not expand to the bottom inch of the screen, as if the icon dock prevents it expanding to the icon bar area of original icon bar size (i.e., inch, not half inch I'm using), and as if there was a line at the bottom inch. I click the plus sign (maximum screen), it still leave the inch uncovered. However, if I use full screen modle, Safari would covers the whole screen.
    when not in full screen model, I can drag the bottom edge of Safari, but can only drag to the virtual icon bar line (at bottom inch position). When bottom edge is at the virtual line, the drag arrow is single direction pointing to up. However, I could move Safari to lower and cover the bottom inch area (with icon bar on the top), and then drag the top edge to make it cover all screen area.
    What makes more annoying is if a new tab automatically opens, Safari will goes to the size with the bottom inch uncovered. This problem does not happen if program runs in full screen model.
    I tried a few programs, all have such problem. Looks to me default maximum screen size excludes the bottom inch (because by default that area is supposed to be occupied by icon bar although I changed the size or just simply hide the icon bar).
    Anyone know why? How to solve the problem? TIA.

    called Apple, the solution is:
    1, turn on sound
    2, shutdown
    3, press and hold these four keys the same time: left option, left command, R, and P
    4, press and release power button to restart
    5, after first starting chime sound, continue hold those four keys
    6, after second starting chime sound, release keys
    this resets some settings --- not sure what is reset though.

  • Maximum screen size

    Hey All,
    Can anyone tell me if there is a maximum screen height that I can set for my custom form? I know there are guidelines etc.. from the SDN and I normally use those. But we have a client that wants the screen to fill up as much of the screen as possible. I have tried using the screen painter and setting it directly in the xml and unfortunately some of the form remains hidden on the bottom and does not display even though there is room for it on the screen.
    Any ideas on how this can be done?

    Hi Curtis,
    The <i>Application</i> object contains a <i>Desktop</i> object. It represents the SBO desktop and contains a width and a height property... The code below should work I guess... (did not have time to test it though)
    <b>Code (C#):</b>
    /* Postion the form to the left upper corner */
    MyNewForm.Left = 0;
    MyNewForm.Top = 0;
    /* Set the width and height of the form */
    MyNewForm.Height = MyApplicationObject.Desktop.Height;
    MyNewForm.Width = MyApplicationObject.Desktop.Width;
    Hope it helps!
    grtz,
    Rowdy

  • Increase the screen size in ARD.

    I control a Mac Mini via ARD from an iMac which has a 2560x1440 screen. The maximum screen size shown by the Mini is 1680x1050. Is there any way I can get the Mini to display on the full 2560x1440?

    CLosing thread

  • How to change font size, maximum column size in the result screen ?

    hi All
    That's great when using SQL Dev.
    But I also have a trouble that how to change font size, maximum column size in the result screen ?
    My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
    Appreciate for anyone to help us.
    Thanks all.
    Sigmasvn

    You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
    Also, there s the option of switching the layout of a record in the grid.
    Sue

  • What is an idea of maximum file size for a film in Captivate?

    Hi there,
    I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
    Thanks in advance

    Probably better guidelines that dictates 'size' of a vi are:
    typically no more than 1 video screen in size
    is it legible
    and is it's function and operation clear.
    I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
    Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
    Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • Screen size with iPad

    When I set my iPad to mirror unto my Apple TV the screen size is small. How can I get it to be the maximum size of my tv screen?

    Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone and aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.

  • Is there a maximum file size in Aperture 3?

    Is there a maximum file size in Aperture 3? All my files from a digi camera work fine in Aperture. However I also shoot film and get hi res. scans done. These files are very large, especially after working on them in photoshop. A2 does not like large files much above 250MB. What about A3?

    So far it's doing just fine with my Mamiya 645 scans (about 11,000x15,000 pixels, around 200MB) whereas Aperture 2 would gag and maroon-screen on them. Needless to say my poor old first gen Mac Proo huffs and wheezes a bit on some operations, but it is working.
    Duncan

  • How to change maximum webcache size

    I want to change my current Maximum Webcache size to 150% ( if 1 GB then to 1.5 GB ).
    I checked from webcachec administrator screen that
    Properties ->
    Resource Limits ->
    Cache-Specific Resource Limits -> Maximum Cache Size (MB) is set to 1024 , I changed it to 1536
    But when I check
    Monitoring ->
    Web Cache Statistics ->
    Cache Overview -> Configured Maximum Cache Size: 1024 MB ( Its still pointing to 1024 )
    Whats difference between two , why above Configured Maximum Cache Size not displaying 1536 .
    P.S. I Bounced webcache as well .
    Any Pointer ?

    Hi,
    It should actually both point to your changed value. Did you restart both the admin & cache servers? What does the resource limits page say on the cache size after you restart the cache?
    Regards,
    Priyanka GES
    Oracle Web Cache Team

  • Maximum playback size of a Quicktime file?

    Is there a way to limit the maximum playback size of a Quicktime file?  For instance, if I have a SD file, is there something on output or in the metadata that I can set that will only ever allow it to play at 720x480 and never go "full screen"?

    Sorry but no...

  • Hi ,Maximum line size in the report

    What is the maximum line size inthe report.Some are saying 1023.Some are saying 255 characters.I am full confusing this concept.
    And if the line size mentiones in less than the length of the data in the write statement ,what happened?
    Sometimes it is coming in the next line , sometimes it is coming in the next line
    Please anyone provide the solutin

    hi,
    The line width determines the number of characters in the line buffer as well as the number of columns in the list displayed. The value width must be a positive numeric literal. The maximum line width is 1,023 characters.
    When the LINE-SIZE is not specified, the line width of the basic list is set to a standard width based on the window width of the current Dynpro, but is at least as wide as a standard size SAP window. For the standard width, the contents of sy-linsz is 0. The LINE-SIZE overwrites the value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-SIZE addition to the statement NEW-PAGE.
    For screen lists, you should use the standard value since, as a rule, page breaks defaulted through LINE-COUNT are not adjusted to the window size.
    You should also use the standard value for print lists, so that you can still select the page size on a printer-specific basis. A print list should be created in such a way so that it can handle every page size.
    Specifying a fixed line count is only useful for form-type lists with a fixed page layout. Here, however, you should always check whether such forms can be created by other means, such as SAPScript forms.
    when line size is more than your data... your ouput screen will be dragging after all your output display..So bettery ou should use the standard value .
    Regards,
    Muhammed Safel

  • Maximum pane size???

    Hi!
    A have a lot of problems, because I can't set maximum pane size? Here is an example of it. I have image control that is bigger than screen resolution, so I have to enable vertical and horizontal scrollbars, but then user can scroll into "infinity"and I don't want that, because I have other controls that user must not see. I know that I can achive that with Scrollbar control, but it will be much easier if you could set maximum pane size and place other controls out of this area, so that user can not see them. It is also anoing if you scroll into blank area of the pane, so it will be great if I can limit this scrolling area. If I use Scrollbar control then I have to resize them too when window size is changed. Does anybody know better way to achive that?
    Thanks,
    andrej

    Hi Adnan,
    I'm believe that guys are right when they say that there is no way to just set the limits you will be able to scroll in. Maybe if you didn't use upper recommendation, you can keep reading rectangle displayed by your front panel pane (Content Area Rect or Origin property), and you can compare actual values with maximum values. This solution is far not so elegant as it is the one with Image Control Scrolbars, however it offers you some flexibility more since it is not related just to Image Control.
    Regards,
    Martin
    Attachments:
    Content_Area_Rect.jpg ‏7 KB

  • Maximum thumbnail size?

    I know there is a way to set the maximum thumbnail size with a keyboard shortcut (?) so as only use the thumbnail and not resize the original on the fly. Does anyone know how to do this? Thanks. B.

    Hi Brent,
    0 very small
    1 one photo in view
    2 max thumbnail size (I think this is the size that is in the Data folder) For my screen this will give me three thumbnails in a row

  • Adjust the screen display dynamically for a given screen size and resolutio

    Hi All,
    Is there a posibility to change the size of a table control dynamically to maximize the screen utilization keeping in mind , the different screen size and resolution. This is to increase the breadth of the table control that there is maximum utilization of screen and which would not produce any horizontal scroll bar in case of small size monitors.Kindly advice.
    Best Regards,
    Ashwini

    There is no such control that you can put into the programming logic to enhance the visual appearance of the table controls or screens. This is taken care of by SAP GUI, which will adjust the display size of the table control according to the screen resolution.

Maybe you are looking for