Macros for Crystal Enterprise scheduler

<p>is there a list of macros that can be used in the Crystal Enterprise scheduler. I know the obvious ones like %SI_VIEWER_URL% to insert the URL of the viewer on an e-mail sent but there must be more.</p><p>I am especially am interested in any to do with the users e-mail address.</p>

Post Author: khardy08
CA Forum: Older Products
Have you gotten any replies yet? I'm currently using version 10, but I think I have a copy of version 9.

Similar Messages

Is there any SDK for Crystal Enterprise 9?

Hello folks,
Our client is using CE9 for reporting. As upgrade is not convenient this point of time, they requested for Security matrix of current CE9 portal. There are around 700 users, 3000 crystal reports and 60 folders hence it is hectic to update this information manually in excel
I tried to run excel macro which we were using for XI 3.1 but it does not work for CE9.
Please suggest if we have some sdk or any other method to retrieve this information
Regards,
Lokesh

Hi Lokesh
No, not anymore. Too old. No downloads anywhere.
Sorry.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Firewall settings for Crystal Enterprise

I have recently started working from home and have found that I cannot access the Enterprise report repository via my locally installed version of Crystal Reports XI r2. The application starts up fine but when I try to open a report from the Enterprise location I put in my logon details but after a few minutes I get an error 'Transport error: comunication failure'.
My network team have looked into it and say that this is happening because the ports that Crystal is trying to use are seemingly randomly assigned and they cannot define a rule for me to allow access.
Is there any way for me to define which port(s) Crystal will connect via so that networks can open a hole in the firewall for me?

Hello Keith,
You are asking an Enterprise configuration issue, not a data connectivity issue. You really should post your question to the Business Objects forums.
Enterprise can be configured to work with firewalls. Ports can be set on the various servers using command line switches, etc. I believe firewall configuration is covered in the BOE XIR2 Admin guide, or possibly one of the appendicies. Here's a link to the BOE XIR2 Admin guide:
[BusinessObjects Enterprise XI Release 2 Administrator's Guide|http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_bip_Admin_en.pdf]
If you need additional assistance you should consider opening a support case.
I hope this helps!
Sincerely,
Dan Kelleher

SDK rference for Crystal Report Scheduling in Infoview

Hi,
I need to schedule Crystal Report in BO XI 3.1 Infoview. But each of reports have 3 parameters\prompts. I need to manage them dynamically. So I think only way to do this is to use SDK.
Can you please suggest about such referance\guide\documentation for these kind of SDK for Infoview scheduling.
Regards,
Avijit

Hi Avijit,
go to link below and scroll a bit for .NET SDKs
https://www.sdn.sap.com/irj/boc/sdklibrary
Thanks,
Praveen.

Dynamic url link for Crystal Reports Enterprise?

Hi all,
We recently upgraded to SBOP 4.0 SP2 and are looking at migrating our existing Crystal Reports from Crystal Reports 2011 to Crystal Reports for Enterprise 4.0.
Up to this point we have been utilizing the BW Publisher and role menus in BW.
Our long term goal is to migrate users from the BW GUI to the BI LaunchPad but this will be a gradual process.
Until we make the final switch to the LaunchPad we need to maintain the links in the role menus. I found the Document Link option for Crystal Reports so I have a URL to point to the report that we can put in the role menu, but the system value is not dynamic. Is there a way to make this dynamic like we can do with web template URLs?
For example, when using a web template URL we can use the <bsp_server> parameter in the URL to determine the SAP system. Is there an equivalent that can be used in the Document Link for the Crystal Report to determine the respective SBOP system?
Thanks.
-Brian

Hi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh

Crosstab not refreshing for dynamic publication using Crystal Enterprise

We are using Edge 4.0, and are setting up a dynamic publication where we pass in an account number into a Crystal Enterprise report to filter each recipients document to their specific data.
In the Header of the document, there is a crosstab report that summarizes some data. When the publication is run, for example, for 2 accounts, the crosstab table contains the same data for both client accounts. This happens even though the detail data within the lower section of the report contains the appropriately filtered account data.
Initially I was thinking that it was picking up some cached data and using it to boost performance, but I have adjusted the locations I can find within the CMC for "Oldest On-Demand Data Given to Clients (seconds):" to 0.
See the image below for the layout in Crystal - http://screencast.com/t/eyqJ08Tu7
The account number in the header and the data in GroupHeader1 is filtered appropriately based on the dynamic recipient, but the crosstab data is pulled from another publication recipient.

I was able to get this to work as desired. In order for the crosstab report to contain data that matched the rest of the report, I had to set "Filters" options within the personalization section of the publication section.
In Crystal Reports 2011, the parameters section, by itself, filtered the data correctly.
This can be seen at the following URL:
http://screencast.com/t/MS7HjFEUk

DB2 support for Crystal Reports for Enterprise And Unx errors

Hi,
I have a requirement to create a report in CrystalReports for Enterprise 4 sourcing data from Oracle 11 and IBM DB2 V9 databases. My first approach is to create relational connections for both the databases in the BO Repository (using Universe designer) and use them directley in the CR for Enterprise. Here I was able to create the two connections but unable to use the DB2 connnection in the report. I get the below error:
"The Database DB2V9 is not supported".
Is DB2 is a supported database for Crystal reports for Enterprise ??
My second approach is to create a multisource universe using IDT. Here when I try to create the Datafoundation layer, I get to see the tables from the DB2 databasae but When I expand the Oracle connection, I get this error: "conversion from UTF8 to charset failed: encoding not loaded".
Im unable to create a multisource universe at all no matter what connections I use.
Here is some additional info:
SAP BI4.1 SP1
Windows 2008 R2 servers
Oracle 11g
IBM DB2 V9.7
Any suggestions please!
Thanks,
Ravinder

Hi,
First of all I would strongly advice you to only use IDT for your universe development. The old Universe Designer is a legacy tool and should not be used unless you are using products that doesn't support IDT universes.
The issue you are facing for your Oracle connection is likely caused by a missing path variable.
Add "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64" to the PATH environment variables on the SAP Business Objects Enterprise server.
Restart the SIA
NOTE: Modify the path in case the SAP BusinessObjects Enterprise is installed in different folder.
Hope this helps.
Cheers,
Josh

LOV issue for Crystal Report 4.0 ( Enterprise ) using the BICS connection

Hi Expert,
I am working for one our client which is using Crystal Report Enterprise 4.0 SP 2 i am facing the following problem with the LOV .
- I have created the crystal report on top of BEx query using the OLAP connection in CMC .
I have the variable at BEx query level which have list of value around 100 K and user want to search through that LOV in order to make his selection but as soon as i include that variable in my Query and run my CR my report crashes and i cannot run the report .
I gave the user the option of manual input of value to that variable it does not work as it uses the BICS connection and i read somewhere we cannot use the manual input in case of BICS connection for crystal report you have to select the value from the LOV .
My Question is is there any workaround if we can restrict our LOV to some extent and let the user to select and search from that any setting if we have at query designer level to restrict the LOV to burst in the report .
Any input will be appreciated .
Thanks,
Vibhav

Hello,
Please log a case in Service Market Place and a Rep will call you to discuss your question.
Thank you
Don

Does Crystal Enterprise X support IIS ISAPI for viewing a report

Post Author: karthiknataraj
CA Forum: Upgrading and Licensing
Hi,
The Crystal Reports Web Component Server (Wcsinsapi.dll) is an Internet Service Application Programming Interface (ISAPI) compliant DLL. ISAPI is the programming interface that allows DLLs (like WCSinsapi.dll) to extend ISAPI compliant web servers functionality for processing HTTP requests. ISAPI DLLs are generally registered to handle HTTP requests for certain file types. This type of configuration is done by registering a file extension to the ISAPI DLL within IIS. For Crystal Reports the ".rpt" and ".cri" file extensions are registered to the Wcsinsapi.dll. Common behavior when the ISAPI registration is incorrect includes receiving an HTTP 500/501 error or being prompted to save to disk when trying to browse to a Crystal Report (.rpt file). This is supported by Crystal report 8.0 & I suppose the same in 9.0.
My questions are, is IIS ISAPI supported in Crystal Report X? Whether the RPT file can be launched in a browser with the parameters as query string (as in 8.0)? Why is the Wcsinsapi.dll not available in the crystal enterprise X installation?
I hope the answers to all the questions are, its deprecated. But I can't also find the documentation that clearly specified it is deprecated in crystal reports X. It would be greatly appreciated if any one can point to the documentation that specifically & clearly explains about this or correct me if I am wrong.
Thanks,
Karthik

Here are the direct links:
[1219293 - Error: 'Cannot get a reference to the Web Component Server: host: servername...'|https://service.sap.com/sap/support/notes/1219293]
[1215127 - Error: 'Request failed with code 7 and error message' in application event log|https://service.sap.com/sap/support/notes/1215127]
Regards,
Bryan

How To Run a Parameterized Report Stored in Crystal Enterprise on demand

I have been integrating into Crystal Enterprise 10 for many years now with no problem. We use .net to schedule and run reports as well some administration tasks. Users can view reports through our asp.net web application using the crystal viewers.
However, I now have a task that requires us to run a report that is stored in CE on demand. This can NOT be done through the viewer because it will not have direct user interaction. The crystal report has to be bundled with other documents and then displayed to the user in a single PDF. I have everything working right now if the report has already been scheduled and ran through CE.
What I can't figure out to do is how to actually run the report in CE on demand and immediately get the results back. I can't schedule it (even for immediate running) because I can't have it backed up in the job server queue. If the report was local on the machine that Integerate with CE, I think it is as simple as loading document, setting parameters, and calling refresh. However, I need this to happen in CE with the RAS or PageServer server. In other words, the execution of the report needs to occur on server and I need the end results.
I have scoured the Net looking for an example but everything either talks about scheduling through Job server or on demand through the viewer.
Hopefully someone can help.

Thanks for the answer Elaine, but I am still not quite there.
We already had interactive on-demand report viewing working through our web app.
The problem is that I need non-interactive on-deman report running. Let me explain the process a little more to help paint the picture of the process we have.
1. While working in our application, the user selects an "information dump" on the selected the employee. This dump is information from a number of different places and document types.
2. The application then goes to each of these different information areas and converts the information to PDF format.
3. Application stitches all the individual PDF files into a single PDF which is what is returned to the user via the web application. The delivery mechanism cannot change due to requirement limitations.
Currently, the information is coming from multiple MS Word mailmerge documents merged "on-the-fly" with data for the employee and a stored HTML worksheet that is also converted to PDF.
We now have to add a PDF version of 2 reports that are ran when the user requests the information dump.
I already have the code to connect to CE and get a reference to the RASReportFactory. We do this today using the interactive viewer. However, we use the viewer to display reports that have already been scheduled and ran. This means we simply make a call to RASReportFactory.OpenReportSource to get the source for the viewer.
We now can't have a viewer in this process. I found the call to the method OpenDocument on RASReportFactory to get a handle to a ReportClientDocument.
I know how to properly set the values for the report arguments as well as the database information.
What I don't see is a method to tell it to run the report. I see Save and SaveAs but this simply saves the document by to CE or to a local file with the changes I made to parms and db info.
What do I call to tell it to execute the report so I can turn around and export it to PDF? Thats the million dollar question.
Edited by: Stephen Barrett on Aug 20, 2008 12:11 AM

Configure ePortfolio for Crystal Reports 9 Report Application Server for Users to Run Reports

Post Author: lacc
CA Forum: Crystal Reports
Sorry for this basic question but Crystal 9 is no longer supported and I am having trouble finding any documentation about how to configure ePortfolio let alone obtain any help from Crystal support.
I have a set of .RPT files and would like the simplest and quickest method of distribution to the users with as little coding and fuss as possible.
We have the ePortfolio page up and running but the users can only view the reports from ePortfolio. They also need to be able to run (refresh) the reports and enter the parameters which have already been built into the .RPT file. Providing access to the deactivated Schedule and History links would also be useful though not a priority unlike access to refresh and enter parameters.
I usually create reports to run from within an application which I can handover to the application developer so working out how to distribute via this method is pretty new to me.
I've also had a quick look at the Crystal Reports Viewer XI which appears to be backward compatible for Crystal 9 reports however this also appears to only allow users to view, not generate, reports.
Any recommendations? Or could you point me in the direction of some documentation that might assist?

Post Author: lacc
CA Forum: Crystal Reports
I think I've worked out that we are actually using ePortfolio Lite. Would anyone be able to confirm if there are any configuration options for ePortfolio Lite? I think we only have the Crystal Reports 9 Advanced version, not Crystal Reports 9 Enterprise. Would this mean that we therefore only have ePortfolio Lite not ePortfolio?

In Crystal Enterprise - how do I email if no records exist

I havea report thatis an exception report. It is a daily import into another table by a 3rd party. I run the report daily to test to see if there are no records. If there are records in the report, then I do not want to email the report, however if no records turn up for the day, I want to fire an email off to state that nothing was received for the previous day.
Anyone have any familiarity with doing this?
I am using Crystal Enterprise XI R2 (11.5)

In the report footer, put a formula like (basic syntax):
dim div0 as number
if count({field}) = 0 then
div0 = div0 / div0
end if
This will cause the report to "fail". When scheduling the report, send an email if the report fails.
HTH,
Carl

Migration from Crystal Enterprise 10 to SAP Crystal Server 2011

Hi all,
We are currently using Crystal Enterprise 10 to schedule and view our reports and the designer is Crystal Reports 10 .
we are planning to migrate to SAP Crystal Server 2011 with Crystal Reports 2011 as the designer.Can we do this migration directly or do we need to do the migration to an intermediate version before going to SAP Crystal Server 2011.
Regards,
Sreekanth S S

1. So in this case, I need to migrate from Crystal Enterprise 10 to Crystal Reports Server XI R2/Crystal Reports Server 2008 or more using import wizard Then I will need to migrate from Crystal Reports Server XI R2/Crystal Reports Server 2008 to SAP Crystal Server 2011 using Upgrade Manager tool. Is my inference correct?
That is correct. For XI R2, it would be XI R2 SP2 minimum. And you need to have a live installation of XI R2 SP2 as SAP does not have it in archieve download area.
2.What is the potential risk if we try to migrate from Crystal Enterprise 10 to SAP Crystal Server 2011 using upgrade manager tool?
I am not sure if that will work with success, If the reports migrated from CE10 do not work in CRS2011, it would be unsupported. You can however try it anyways.
3.Can we open the reports developed using Crystal Reports 10 designer in Crystal Reports 2011 designer? .This is for another requirement of us where we have to just migrate the reports alone .
Yes you can do that. Try opening and running them in CR2011, they should work but some of them can also result in some errors here and their, this is more specific to report design and what kind of grouping\ filtering\formulas you use.

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

SSO to Crystal enterprise eportfolio with SAPLOGONTICKET

Hi
We have setup Crystal Enterprise V10 to SAP Authentication and we are able to connect to Crystal eportfolio with SSO from EP6SP2 app integrator based iview without any problem, by giving R/3 userid, password via usermapping.
We have loaded verify.der from EP6SP2 in SAP R/3 and SAPLOGONTICKETS are working fine with other ESS iviews.
However for the Crystal eportfolio app integrator based iview if we change the logon method from UIDPW to SAPLOGONTICKET we are getting the login screen from Crystal eportfolio prompting for userid/password.
We have loaded verify.der in SAP R/3 and SAPLOGONTICKETS are working fine with other ESS iviews.
These are our settings on the app integrator based iview in EP6SP2:
URL template:
<System.protocol>://<System.server><System.uri>?<Authentication>
URL template fraction for SSO2:
MYSAPSSO2=<Request.SSO2Ticket>
URL template fraction for usermapping:
usr=<MappedUser>&pwd=<MappedPassword>&aut=secSAPR3
Required instance profile parameters on R/3 were set correctly, and all servers are referred with their FQDN.
Did we miss anything else that is specific to Crystal eportfolio? Has anyone successfully connected to Crystal eportfolio V10 from EP6SP2 using SAPLOGONTICKETS ? Appreciate if someone can share their experience.
Thanks
Nagesh

Hi Ingo
Thanks for your response.
1. URL that I am calling from inside the 'App Integrator' iview to access Crystal eportfolio is:
Name of the server:
<hostname>.<domain>.com
Protocol of target system:
HTTP
URI of Web Application:
/crystal/enterprise10/sap/ePortfolio/en/logon.csp
URL template fraction for Single Sign-on (SSO2):
MYSAPSSO2=<Request.SSO2Ticket>
2. URL of the Portal:
http://<portal_hostname>.<domain>.com
In both the above URLs, the <DNS domain> is same.
3. Log on to standalone eportfolio works perfect with 'SAP' Authentication. SAP User can logon to eportfolio directly from the browser using SAP userid/password.
For the above iview when SYSTEM is changed to UIDPW logon method it works perfect, and Portal user can get into crystal eportfolio from the app integrator based iview without any problem.
Once the logon method ( SYSTEM property) for the above iview is changed to SAPLOGONMETHOD single sign-on is not working anymore and the user receives Crystal eportfolio login screen.
Question is:
a) Can logon.csp file from Crystal handle SSO cookie coming from Portals and authenticate the user against SAP R/3, and let the user login successfully ??
b) Is the URL template fraction for single sign-on (SSO2) given above is corrrect/complete?
c) On support.businessobjects.com website I found that this is a known problem for Crystal 8.5 with Track/Problem ID: ADAPT00094464 and fix was given via CE8.5 Service Pack-I. Since we are running Crystal V10 I assume that this has been taken care of in the new release. Is it not true? or is there seperate service pack for V10 too..? Please let me know.
Thanks in advance.
Nagesh Seemakurty

Macros for Crystal Enterprise scheduler

Similar Messages

Maybe you are looking for