MacUpdate has 11 Mac applications for $49.99
MacRumors has partnered with MacUpdate to promote their Mac application bundle deal.
Their latest bundle delivers at 11 Mac applications for $49.99 (a $457 value if all purchased separately). Notably, it includes Parallels Desktop 7, a popular virtualization tool that allows users to run Windows on their Mac.
http://www.macrumors.com/2012/06/06/macupdate-bundle-11-mac-apps-for-49-99-inclu ding-parallels-desktop/
MacRumors has partnered with MacUpdate to promote their Mac application bundle deal.
Their latest bundle delivers at 11 Mac applications for $49.99 (a $457 value if all purchased separately). Notably, it includes Parallels Desktop 7, a popular virtualization tool that allows users to run Windows on their Mac.
http://www.macrumors.com/2012/06/06/macupdate-bundle-11-mac-apps-for-49-99-inclu ding-parallels-desktop/
Similar Messages
-
"Your Mac OS X Startup Disk Has No More Space For Application Memory"
I've been having a problem in the last few days with my Mac. I would be surfing the net, or doing whatever, and an error message would randomly pop up on my screen. It would say: "_Your Mac OS X Startup Disk Has No More Space For Application Memory_". Then the dialog box would give me the option to PAUSE or *Force Quit* applications. But instead of letting me click these buttons, my Mac would just automatically freeze after the dialog box popped up!
The odd thing is, is that I truly was NOT using that much memory...much less than I usually do. Plus I have 4 GB of RAM, and I know I wasn't maxing it out.
Does anyone know why this error message would be popping up like this (especially since there was no way that I was using all my Application Memory)? And does anyone know why my Mac just freezes instantly when the error message pops up?
Any help would be GREATLY appreciated! It's quite hard use my Mac right now, since I never know when it's gonna freeze up on me!
Thanks!I assume that means no backups? That's a problem you need to fix next.
You might be able to start your Mac in "Target Disk Mode" while connected to the other Mac. You do this by holding down the "T" key while booting. And I was wrong: you must use Firewire, not USB.
The other Mac will see your HD as an external F/W drive. You may have to "mount" it via Disk Utility, if it doesn't show up on the desktop and/or Finder sidebar.
You probably need to do a lot of examining what's not needed, and perhaps some maintenance, but you don't want to do that under pressure.
To get it running and buy just a bit of time, your best bet is to copy some big stuff (like video) either to the other Mac's hard drive or to one or more DVDs, then delete it from your HD.
Once you get several GB free, you should be able to boot it. Then get started cleaning it up. There are many threads in this forum with links and suggestions for how to do this. Just search for +Disk Full.+
Did this happen all of a sudden? If so, it's possible you had some sort of runaway or continually failing process, filling up some logs and/or caches. If you don't do routine maintenance, either by clearing your browser cache, etc., manually, or via an app like OnyX, that's another thing you might want to investigate. -
I am on a MAC Application.
It has been rejected by following reason.
This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
We recommend implementing receipt validation to resolve this issue.
At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
Any help ?
Thanks in Advance.I am on a MAC Application.
It has been rejected by following reason.
This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
We recommend implementing receipt validation to resolve this issue.
At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
Any help ?
Thanks in Advance. -
Does the Imovie Application for Ipad 2 have the same trailers loaded as the Imovie Application for Mac regular computers
They are 2 separate apps, there are no trailers for the IOS version.
http://www.apple.com/ipad/from-the-app-store/imovie.html -
I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.
Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran -
Flash Application for Mac won't open from DVD disc
I've created a Flash application for a Mac and I have the latest security fix/update for Flash (that was supposed to fix Flash Players and etc.). I've burned the file onto a CD and a DVD. The file plays/opens from the CD but it won't play from the DVD.
Has anyone run into this before?Well I found some sort of solution. I was burning both discs from a PC. I finally burned the DVD from a Mac and now it works!
-
Has anyone submitted a successful application for the up-to-date program?
has anyone submitted a successful application for the up-to-date program? I submitted my application 2 days ago and when I log on it's still under review. Has anyone had difficulty with this? When they finally get back to me am I likely to be offered iworks? - I've fulfilled all criteria, I just wonder whether they expect me to jump through any more hoops
Change your Mac's System Preferences to English and go to the Mac App Store and you should see it for free.
Otherwise see the Apple Up-To-Date Program:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=429&mforum=iworktips ntrick
Peter -
How can i download applications for my mac
How can i download applications for my mac for free
At the App Store you can download any file that is available for free. Then there are other sites such as MacUpdate.com where you can also find free files to download.
-
Startup disk has no more space for application memory - itunes using 19GBytes!
I am having intermittent but recurring issues with the dialog "Your Mac OS X startup disk has no more space for application memory" and iTunes is listed as not responding. Activity Monitorsays iTunes consuming on various instances 16 and 19GBytes etc.
Any ideas??
System is a ~ 6month old 27" late 2012 iMac with OS X 10.8.4 32 GBytes RAM and 3TB disk with 2TB free. App Store says no updates.Read this whole message before doing anything.
Back up all data.
Quit iTunes if it’s running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash, if they exist:
Caches/com.apple.iTunes
Caches/QCCompositionRepository-com.apple.iTunes.cache
Saved Application State/com.apple.iTunes.savedState
Leave the Library folder open. Try iTunes again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit iTunes again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
iTunes
Note: you are not moving the iTunes application. You’re moving a folder named “iTunes.”
Test. If iTunes now works, delete the iTunes folder on the Desktop. Otherwise, quit iTunes again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
Step 3
In the Preferences subfolder, there may be several files having names that begin with either of the following strings:
com.apple.iTunes
com.apple.mobile.iTunes
Move them all to the Desktop.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Test again. This time iTunes should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes iTunes to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit iTunes again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting iTunes and restoring the items you deleted in those steps from your backup. -
My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful. -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
The Web Dynpro Application for LeaveRequest has expired
My problem with the portals is that when users apply for leave they get the message. The Web Dynpro Application for LeaveRequest has expired. On another machine the user is working fine. But sometimes users get that message. I ve been in contact with oss calls but these guys are not helping. Even checking salary statement give the same problem. So has anybody experienced this problem that can help me or even can give advise please help
Naziem Mahomedhi
just go through the follwing link
http://help.sap.com/erp2005_ehp_04/helpdata/DE/2d/292391fa6745488f3e0e0d4b03c64e/frameset.htm
may be it will help u.
Thanks
Bharathi.ch -
I just bought a WD external HD but it is formated for windows. It says the drive has to be reformatted for Mac. How does one do that?
shldrtothewheel
http://lmgtfy.com/?q=youre+awesome+ -
The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.
Disregard, problem solved.
-
I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?
Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.
Maybe you are looking for
-
How can I use Find my iPhone on supervised devices?
I manage a fleet of iPad 2 carts for my school all using the same Apple ID, but I have run into a wall with this problem. In the past Find my iPhone has not be able to for me on supervised devices. I have thought about using Meraki, but I have read t
-
I have the same iPhone as my friend but she has way more space than mine.. What gives? What should I do with mine? Is it possible to just go up to a 16gb?
-
Purchasing Report Errors - Please Help
Hey everyone! I am an SAP newb so bear with me please. I am having issues with a the Purchasing report on our system. The report takes parameters determining the time period for which the report is to be run, ex: from Jan 1 2008 - Aug 1 2008. The val
-
To get sample C code of function mudules in SAP BW
Hello, In SAP R/3 4.6C , I got sample C programs of function modules in transaction SE37 via Utilities -> RFC Interface -> Generate and Download. Now I would like to get sample C programs of function modules in SAP BW 3.0B. But there is not the menu
-
is it possible to just SAVE all the notes as texts on pc ... i am using n8 belle (not the ms one note but the inbuilt notes application) tried using nokia suite it said U MUST INSTALL OUTLOOK FIRST