Made an error and ran into a rough VZW agent

I gave my sister my unlimited data plan and she was playing around with it and stuck her sim card into a jetpack to test out while at home. I called VZW to combine her account and my other lines into a shared plan, and the agent went ballistic on me. Claiming I was stealing from Verizon and that you can't use a jetpack on the unlimited line (which I know now). So I told her I would just have my sister switch the SIM back and fix it. She wouldn't have anything to do with that. She ended up canceling my UDP and placing the jetpack on it's own line with 2GB of data. I still had my sister swap her SIM and added the line back to my share plan, but no one seems to be able to reaccess our UDP. Has anyone ran into this issue before? I was told they could try a change request and see if I can get the UDP that way.

The problem here is that Sim never should have left your device. I know people like to swap devices here and there but when Verizon is doing anything it can to take people off unlimited data don't make it easy on them.
Since the code to restore it is not in their customer service system they tell you they will do a null pricing request. These requests are summerilly denied.
You could take Verizon wireless to a State Supreme Court for the action but it requires lawyers, court costs and it may be possible to have Verizon pay your attorney if they lose. But if they win? Think about the costs to you.
Good Luck

Similar Messages

N1SM 1.3.3 OS Load gives syntax error and drops into interactive install

Hi
I am trying to load Solaris 10 u4 onto a T1000 and a X4100.
This is my first installation of N1SM.
When I give the load command the T1000 will boot off the network, but after a while I very
briefly see a syntax error and a line about using US Keyboards, then the installation goes
into interactive mode rather than unattended.
This is very frustrating.
Does anyone have any ideas as to what could be going wrong?
I have installed N1SM on Solaris 10 U4 x86 and have the recommended patch bundle installed.
Thanks

No ... it will stay as IDR (Interim Diagnostic Relief - http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=IDR+site%3Asun.com ) afaik
If you want it, ask Sun for it ... official patch will not be released for it yet ... and I wouldn't count on official patch so soon ...
If you have a support for N1SM ... ask for the IDR , it's no. is IDR137229-01 (x86) & IDR137228-01 (sparc) , not sure about the linux one ...
hth
L

I "upgraded" to Lion and ran into Administrator account problem

I "upgraded" to Lion a week ago on my MBP. Almost everything is working OK. I've upgraded a Number of programs to newer versions and even reinstalled Office 2011. With Adobe InDesign (i just upgraded from CS4 to CS5.5) when I try to activate a 3rd party plug-in it tells me to run the program as Administrator. Everything I've done is from the only account on the machine which is an Administrator account. I tried setting up another account and setting it as an administrator, but still no luck. Is anything like this common to Lion installs? BTW the Indesign is an upgrade but the previous version ran fine on this machine in Snow Leopard.

When I go to System Preferences>users and groups>you can click on the icon photo for the user account and change it to a handful of pictures, but before the lion upgrade there were probably double. My husband also upgraded and he has at least double what I have to choose from.
When I go to Finder>Go>(Option)Library.....I don't see a folder called "User Pictures"? I was hoping to copy his and transfer them to mine....

After 3 years, I got a new iphone5 and ran into the security question issue. Because of the questions apple chose, I have no idea what the answers are. I did the iTunes email thing and waited 36 hours for a response. I

After waiting the 36 hours, I received an email advising me. To contact a phone support number. After waiting 15 minutes on hold, the helpful person asked me for the answers to the security questions and said that answering them was the only way to reset the questions. I said, WHAT? You don't see any cyclic logic there? Apple (the inovator!) has not foreseen this? I was livid. I was advised I could leave a comment on Apple.com. I think I'll leave my comment on every Apple contract that crosses my desk. I'm IT Systems at a large US university. If anyone from Apple wishes to address this, PM me.

Thanks! I'm a little leery of attaching a credit card to itunes again because of all the apple database jacking in the past. I had a bunch of unauthorized purchases charged to my account for devices that I never owned. Took me weeks to replace the credit card even though it was never compromised but apple was impotent to fix the issue. On this issue, I finally got the working key to the system. Even though there are BAZILLIONS of ways to verify a person's identity via two forms, using the security questions forgotten as one of them seems to be circular (failed) logic. Seriously, it's like requiring someone's password to reset a forgotten password. My take on the issue fixed by this workflow, that I noticed from the 3 sets of calls and 20 minute wait on each is this.... iTunes was racked by all the fraudulent purchases I (and thousands of others) experienced and people (like me) had to go through all the credit card issues because Apple "would not" fix the issues in iTunes and pursue the fraudulent purchasers (even though Apple had the device IDs!). So we ripped out our credit card info in iTunes. On this security question reset issue, if they can require people to re-enter their credit card info under the guise of "identification ...because your security is so important!) and then take 60 minutes to create a high intensity customer interaction, there is a high probability that the average customer will temporarily forget all about removing their credit card info. It's actually brilliant! ...but very underhanded.... but also very Apple. I don't expect this reply to have a long life-span, but thanks for your response. If I can log into iTunes, I can add any credit card. therefore IF I CAN LOG INTO ITUNES APPLE HAS THE SECOND METHOD ALREADY! Thanks.

Just made the switch and running into problems immediately

Been a lifelong PC user and switched to a MacBook Pro with the update yesterday. I got home, charged it up immediately, and went for my initial boot-up.
First problem, right as I'm finalizing setup and creating my login and password, I get a "you must shut down now" prompt. That's a crash, right? I can't think of any reason for that to happen off the bat except maybe because of the wi-fi connection, since I had just entered my network password.
Second, I restart and can't find any wi-fi hosts, even though there's several in range. I run network diagnostics, turn AirPort off and on, still nothing. I finally tried rebooting again and now AirPort detects my wi-fi network.
Had to leave for work so I couldn't fuss around more but should I be worried about my MacBook or its wi-fi? I'm excited about finally having OS X full time but would hate to have ended up with a lemon.
MacBook Pro Mac OS X (10.4.9)

First, ensure the problem is still there, since it could be something simple. Second, call AppleCare and notify them of the issue. If they can’t resolve the matter over the phone, then request/demand a Dead On Arrival (DOA) designation, and have them send you a replacement unit. Personally, I would also ask them for some sort of compensation i.e. hardware upgrade, discount, etc. Occasionally, they do this but you typically have to request it politely. Remind them that you’re a “PC switcher”.
Regards,

HT1766 If I updated software and ran into a glich on back up can I restire the photos and data that was on my iPhone?

How can I recover photos if I updated software and the backup to the cloud did not complete?

It says I have 68.1 M on backup but I can not figure out how to access the cloud or iTune backup files.

HELP. Lsass.exe error and cannot log in to windows on Thinkpad T 42

hi, i messed up with registry ..safe mode, access IBM dont help ..... rescue and recovery is on same HD but i have not made recovery CDs .
Is it possible to make these CDs if i take out HD from T42 and use it as external HD on my desktop if so Can some one help me step by step or any other advice to fix lsass.exe error and login into windows

Hi AbbyTaylor,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are getting lsass.exe error while trying to login to your Lenovo ThinkPad T400.
Lsass.exe is responsible for how Microsoft Windows handles security and security related policies, authority domain authentication, and Active Directory management on your computer.
Have you tried to start in Safe Mode as well as with the last know good configuration?
Boot with your Windows system CD and go into the repair console. Try performing a system repair.
Refer this knowledgebase and see if it helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I ran into the follow error after trying to upgrade to the newest version of ITunes. "An application has made an attempt to load C runtime library incorrectly" I was direct to "Contact the applications support team for more information" Can any one help

I ran into a problem with iTunes after I upgraded to the latest IOS. I'm recieving the followig error messages, any help would be appriciated.
Microsoft Visual C++ Runtime Library
Runtime Error!
Programe C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.

Hello mobleymarvin,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT5731 I was downloading the movie Warrior when I ran out of storage. I made space available, and now when I try to resume downloading my movie it says error cannot be downloaded. How can I download my movie?

I was downloading the movie warrior when I ran out of available storage on my macbook air. I made storage available and when I click resume download it pops up an error message saying the movie cannot be downloaded. How do I download my movie?

Go to the Store tab in iTunes on your syncing computer and click on Check for Available Downloads. If it is not there report the problem to iTunes:
How to report an issue with Your iTunes Store purchase

Blue screen error /Blue screen of death(Your pc ran into a problem and needs to be restart)

Hello,
About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
I use a lenovo laptop,
Processor
Core i3 (3rd Generation)
System Memory
4 GB DDR3
HDD Capacity
320 GB
Operating System
Windows 8
System Architecture
64-bit
Dedicated Graphics Memory Type
DDR3
Dedicated Graphics Memory Capacity
1 GB
Graphic Processor
NVIDIA GeForce 610M
i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
3)Optiminzing the disk drives...
4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
5)in Google search someone told that to update all the drivers. i have also done that
6)i have uninstalled and reinstalled the graphics driver.
So, i have tried all the methods given online,but i didnt get any help from it.
So please help me . I am tired of all this
*Sorry for poor english

Without the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet

Scatter Charts and Reporting Service Configuration ran into error

Dear MS Support,
i'm newbie in sharepoint, especially in sharepoint 2013. i'm interest in MS BI and collaboration with sp2013.
but after i install the sp2013 and add file excel using excel 2013, and has scatter chart inside the file, the file doesnt want to shown up. first, i read the error is about the reporting service that need to be check and configure, but after i follow
the step that i have got on internet, the error wont go away, and still appear.
here is the installation taht i've made, please check if i had miss or set the configuration wrong.
http://www.4shared.com/office/FInvHzEC/Instalasi__Autosaved__docx.html
and here the error and the capture when i try to re config the reporting service.
and
so please help me to solved this issue.
thanks in advance
Regards,
Bambang

Hi,
You need to choose to either use Excel services or Excel Web Apps they both have advantages. To suppress opening the file in Excel webApps use the following PowerShell cmdlet, this will resolve the error
New-SPWOPISuppressionSetting –Extension “XLSX” -Action “view”
New-SPWOPISuppressionSetting –Extension “XLS” -Action “view”
This will allow Excel services to be used to view the files or your installed Desktop Client used to edit them..
Excel Web App and Excel Services in SharePoint have a lot in common, but they are not the same. Excel Services is available only in the Enterprise edition of SharePoint Server 2013. Excel Web App is available in SharePoint Server 2013 and SharePoint Foundation
2013. Both applications enable you to view workbooks in a browser window, and both enable you to interact with and explore data.
But there are certain differences between Excel Web App and Excel Services in SharePoint. For example, Excel Services supports external data connections, data models, and the ability to interact with items that use data models (such as PivotChart reports,
PivotTable reports and timeline controls). Excel Services provides more business intelligence functionality than Excel Web App, but Excel Services does not enable users to create or edit workbooks in a browser window.
Reference:
For details about the differences between the Excel Web App and Excel Services, see
Overview of Excel Services in SharePoint Server 2013 and
Comparing Excel Services in SharePoint to Excel Web App.
-Ivan
-Ivan

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

Hi Babowa and Apple:
Thanks for helping me.   Here is my workflow:
I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.) Is that a problem?   Any suggestions?
I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD. I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
After I have imported media as an event and have labeled an event, "NLGE 3000E," then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
Evidently a movie is not saved unless it is in "theater"?
Please see next "reply" for other comments about retrieval.
Thanks.

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

I tried to update the latest update 1/27/14 and it ran into a problem. I am not able to get to my library. I tried to download Itunes and it won't work . What should I do?

Are you sure it was error 0604 since I never heard of that error, it does not appear in the list of errors in the following and a search of Apple's support site gets no hits. However, error 1604 is list and users have reported that error number. If 1604 is the error number the following tell yu wnat to do when you click on that error number:
iOS: Resolving update and restore alert messages

System.InvalidOperationException: Call to Excel Services returned an error. --- Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry. We ran into a problem completing your request

0
HI All,
I am having problem with the power pivot dashboard.
power pivot dashboard processing job fails with the follwoing error message.
SP 2013 with 2008 r2
SQL 2014 power pivot on new analysis server.
Data refersh of cube and database works finw form the power pivot gallery.
The Execute method of job definition Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob (ID 726034a7-b9a9-45a6-b720-640b3f785e49) threw an exception. More information
is included below. Call to Excel Services returned an error.
ULS error:
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry.
We ran into a problem completing your request. ---> Microsoft.Office.Excel.Server.WebServices.ExcelServerApiException: We're sorry. We ran into a problem completing your request.
at Microsoft.Office.Excel.Server.WebServices.ApiShared.ExecuteServerSessionMethod(Boolean hasSessionId, String sessionId, CoreServerSessionMethod coreWebMethod, String name,
Boolean skipFeatureCheck)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookInternal(String workbookPath, Boolean editingMode, String uiCultureName, String dataCultureName, Boolean
newWorkbook, Boolean suppressRefreshOnOpen, Boolean openExclusive, Status[]& status)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookEx(String workbookPath, String uiCultureName, String dataCultureName, Boolean exclusive, Status[]&
status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.<>c__DisplayClassa.<OpenWorkbookEx>b__9(ExcelService svc, Status[]& status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)     -
-- End of inner exception stack trace ---     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall, String methodName, Object[] parameters)
at Microsoft.AnalysisServices.SPClient.ExcelApi.OpenWorkbookEx(String fileUrl, String uiCultureName, String dataCultureName, Boolean exclusive)
at Microsoft.AnalysisServices.SPClient.ASSPClientProxy.OpenWorkbookModelForRefresh(String workbookPath, SessionLifetimePolicy lifetimePolicy)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.RefreshUsageCube(GeminiServiceApplication application)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.Execute(Guid targetInstanceId)
Thanks
Ravi

HI Ravi,
Did you find the solution?
Thanks in advance
Regards,
Faraz Javaid

Made an error and ran into a rough VZW agent

Similar Messages

Maybe you are looking for