Madwifi-utils cannot be found

Hello Arch users,
I'm in the middle of a fresh Arch installation when I ran into a problem. I am trying to install the madwifi-eee-svn package and its refusing to cooperate because madwifi-utils is an dependency. Well, I tried looking for madwifi-utils everywhere but cannot seem to locate it. Simply, is there an alternative or where can I find it?

It's in the core repo. Maybe there is something wrong with the mirror you're using?

Similar Messages

BIOS Flash Utility Fails with "BIOS directory cannot be found"

I download the 32-bit BIOS update 6fuj35us.exe and ran through the ThinkPad BIOS Update Utility Setup Wizard. After I click Finish I accept the option to update my BIOS. It fails to start the flashing process, with the error popup: "BIOS directory cannot be found. The utility process cannot be completed." I tried the ISO image too, it burned and booted up correctly, but I got the exact same error message when I tried to run the flash.
Has anyone been able to get over this issue?
Thank you
Solved!
Go to Solution.

I had to send my machine back for a motherboard replacement. Fortunately, they turned it around quickly, two days, as quickly as the shipping allows.

Disk Utility Cannot Be Opened Because Of A Problem

When trying to launch Disk Utility I get the following error message. Does anyone have any suggestions on how to fix this? I'm running 10.6.4. Thanks in advance for any help.
Disk Utility cannot be opened because of a problem.
Check with the developer to make sure Disk Utility works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Process: Disk Utility [342]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: ??? (???)
Build Info: DiskUtility-2980100~37
Code Type: X86-64 (Native)
Parent Process: launchd [131]
Date/Time: 2010-08-21 18:44:20.863 -0400
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 2359004 sec
Crashes Since Last Report: 75
Per-App Crashes Since Last Report: 5
Anonymous UUID: 93489452-CA67-4296-AA9A-2228E825BA2F
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement: no matching architecture in universal wrapper
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.29f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST3320820AS_Q, 298.09 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa200000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfa230000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa220000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown

Reinstall Disk Utility from your Snow Leopard DVD. If your DVD does not install 10.6.4 then use the Combo Updater to update back to 10.6.4.
How to Use Pacifist to Replace Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist from VersionTracker or MacUpdate. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder.
In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.
• Click on the "Go" button .....
• Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
20 files were scanned.
20 of 20 files were present on the hard disk.
0 of 20 files had file permissions that did not match those specified in the package.
0 of 20 files had checksums that did not match those specified in the package.
6. Click “close”. Go to step 7.
Extract or Install........
7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9. In the next dialog, click “Extract”.
10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11. Type in your password, click “OK”
• Pacifist will begin to extract files.
12. In steps 8/10ß.... you also have the choice to “cancel”
Notes.....
• Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop
Leave original alone
Update ..... Default selection
Replace .... Replace option should only be used on full install packages

The folder "iTunes" cannot be found or created, and is required.

Hello,
I cannot start iTunes. When I do, I get the following error message:
The folder "iTunes" cannot be found or created, and is required. the default location for this folder is inside the "My Music" folder.
I have reviewed and gone through the recommendations for this problem, including downloading the WindowsPowerToys Tweak UI. The problem is that the Tweak UI does not know that there is a My Music special folder, so Tweak UI was of no use.
Can someone tell me what I need to do to make my Dell (Dell doesn't know either) understand that I have "My Music" folder on my computer....so it can be seen in my Tweak UI application.
Thank you.
Tim

I have followed these instructions:
If the My Music folder is in the wrong location or incorrectly assigned in the Windows registry, you may see one of the following error messages:
* "The folder iTunes is on a locked disk or you do not have write permissions for this folder."
* "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
If you see one of the above errors, follow these steps to troubleshoot this:
1. Verify the location of your Windows XP My Music folder. The default location for this folder is
C:\Documents and Settings\username\My Documents\My Music
If you do not have this folder at the default location and have not moved it to another location, consider creating one inside your My Documents folder.
2. Download and install Tweak UI from the Microsoft PowerToys website at http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx Note: This utility is for Windows XP only. Please review the system requirements before installing.
3. Once you have installed Tweak UI, open it from the Start menu.
4. In the column on the left, click on the plus symbol next to My Computer and select Special Folders.
5. In the right pane on the Folderlist, click My Music.
* This is where I run into the problem. My Music does not show up in the *
* right pane pull down set of options. *
6. Click the Change Location button. You may see a warning message appear with precautions for changing this setting; after reviewing the message, click Yes.
7. In the resulting window, browse for the My Music folder as described in step 1, and click OK.
8. Reinstall or open iTunes.

SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter

"The iPod **** cannot be updated. The required file cannot be found" Error

Hello,
Upon doing a 'zero-all bits' reformatting of my 5G iPod with Disk Utility and using the 'Restore' feature in iTunes 7, every time I sync my iPod with iTunes, I get an error message after the sync in the form of
"The iPod ** cannot be updated. The required file cannot be found"
and photos, contacts, and calendars are not synchronizing. I tried a second 'Restore' attempt but to no avail. Previous to reformatting my 5G iPod, I've not seen this error message.
I would be grateful if someone could offer any clues. Many thanks.
1.5 GHz PowerBook G4 12 Mac OS X (10.4.7)
Message was edited by: slaveToTechnology

A little update.
Upon reinstalling iTunes 7, deleting my iTunes-related .plist files, and reparing permissions on my hard drive, I can now sync my contacts and calendars with my 5G iPod.
As for Photos, the "required file cannot be found" error seems to be due to the default setting in the 'Photos' tab, 'Sync photos from:' pull-down menu to 'iPhoto'. If I choose my 'Pictures' folder, photo synchronizing works, albeit including everything in my iPhoto library, including originals and modified versions of the photos.
I can only surmise that the default setting for synchronizing photos is somehow buggy in iTunes 7. I guess I'll just wait for an update.
1.5 GHz PowerBook G4 12 Mac OS X (10.4.7)

The volume for "network" cannot be found

Hey guys,
I have a small probelm.
I have a g5 quadcore, with 2 network ports.
On ethernet port 2 i usea connection to a switch for my internet, which i share with others.
On port 1 i just installed a newtork hard drive, to use with time machine when i go to leopard.
Now, when the hd is connected, and i try to browse my network, by going to finder, and then the network icon, i get an error saying "the volume for "network" cannot be found"
Eventhough I have this error, Everything works fine.
So my internet from port 2 works fine, and my maxtor utility for the external network drive can find the hd, indicating that the external hd also works fine, on port 1.
So, my question is, how do i get rid of the error massage, in order to be able to browse my networks again, and also to find me new external hd, using the finder.
I hope someone can help out.
thanks for any help in advance.
cheers,
pm

Ill try that
Is this save to do though?
It wont mess up any of my progs or whatever? Im dependant on this mac for my work, since it runs in a studio with protools and logic etc...
so i just want to be sure b4 i do this, that it wont mess with anything....
And actually, for some more info, somewhere in the beginning of the threat, you said i should rearrange my network ports, with in my case, connection 2 on top. (since it has the internet)
I tried doing this, but when i do this, connection 1 becomes inactive or something, at least i cannot find my hard disk anymore, which is connected to ethernet port 1.
I guess im thinking that it wont auto mount, because it doesnt run from the same ethernet connector as my internet etc. could that have something to do with it?
anyways, i will try what u said!
thanks for your help so far!

The volume for "documents" cannot be found.

i restarted my laptop today after getting the newest security update and found that every icon on my screen is gone except the "Macintosh HD" icon. i opened up the HD icon and tried to click on the Documents folder on the left, but the message "the volume for 'documents' cannot be found" pops up.
then i tried to restart the computer in safe mode, and repair disk with disk repair utility on the installation disk, but nothing worked...!
i'm more of a windows user than a mac user, so it's safe to say i am now clueless as to what to do next...
midterms are coming up and i need my notes in Documents to study....
pleassseee help me if u can!!!

It sounds like you're saying that everything appears to be working normally, but you can't find of your files? If so, I'd start by doing a search for files you know should exist (using Spotlight, the Search window, or a Smart Folder--command-option N). It's possible that somehow things simply got accidentally moved into places they shouldn't be. If that's the case, you might just need to find them and move them back where they they should be.
null

How do I install newest version of itunes if the Bonjour file cannot be found?

How do I install the newest version of itunes if the Bonjour file cannot be found on my computer?

perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

Time machine "cannot be found"

My time machine disk "cannot be found". It is plugged in via USB, but doesn't show up on the finder. I have tried checking the cable, turning the disk on and off, shutting down the entire computer and turning it back on, plugging it into a different Mac, and nothing I do it working.
Is the disk dead? Is there anyway I can retrieve my pictures from it?

There is a couple of thigns you can attempt, first is open Disk Utility (Applications - Utilities - Disk Utilities) and see if the disk is seen. If it is then first do both a SMC and PRAM resets following the instructions in https://discussions.apple.com/docs/DOC-3603, repeat each reset 2-3 times. Please post with the results

Time Capsule Backup Disk Cannot Be Found

Hello,
I have a fairly new iMac (about 3 months old) running Lion OSX 10.7.4. This is my first Mac Computer. I have it setup wirelessly to a time capsule and had time machine backup. All was running fine until today when I noticed my last successful backup was June 18th. Ive spent several hour reading in apple support communities and other websites and I can't figure out what happened. I have kept all my software up to date.
All my other Apple devices are working fine on the same network: 2 Airport Expresses for Airplay, iPad, iPhone, iMac. . . I just can't get time machine to backup.
My error message is "Backup Disk Cannot be Found"
HELP!

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

Time Capsule internal disk "cannot be found"

Yesterday I stopped being able to connect to my Time Capsule's shared disk; I see my Time Capsule in Finder but when I double-click on the disk folder, it says "The operation cannot be completed because the original item for 'Storage' cannot be found." I've tried installing all software updates, restarting my computer (Mac mini), resetting the Time Capsule, and tried every different file sharing setting, all without any difference. I'm thinking it may be related to the recent software update for .Mac>MobileMe because I noticed there are new icons for this in Finder the same time the Time Capsule disk stopped working.

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

Time Machine Backup Disk Cannot be found

While my iMac was in sleep mode, I disconnected the power to my external, firewire time machine backup disk. The backup is a Western Digital hard drive.
Now I get the error message "Your Time Machine Backup Disk Cannot be Found"
I have rebooted the computer with the disk connected and the disk still doesn't show up on the desktop.
I rebooted the computer with the disk powered up but the firewire disconnected, then connected the firewire. The disk still doesn't appear on the desktop.
I tried Disk Warrior, and Disk Warrior doesn't see the external Time Machine disk.
What to do?

Dan Mackey1 wrote:
While my iMac was in sleep mode, I disconnected the power to my external, firewire time machine backup disk. The backup is a Western Digital hard drive.
That might corrupt your backups, but shouldn't make the disk completely un-usable.
Disconnect it and power it off for several minutes, turn Time Machine OFF, then Restart your Mac again. Let your Mac get powered-up and running before connecting and powering the disk on. Then see if Disk Utility can see it.
Is this a dual-mode disk? If so, try connecting via USB -- it may work that way.
Can you tell if it's running? Is it one with a light, and/or can you hear it run or feel it vibrating?

Error installing iTunes 11 file cannot be found in cabinet file

I am updating my iTunes as I need it in order to plug iPhone in and manage it.
This message keeps coming up everytime I try and download it:
''The file 'DlFxAPl.dll.34BE82C4_E596_4E99_A191_52C6199EBF69' cannot be installed because the file cannot be found in cabinet file 'GEARDrivers_x64.cab'. This could indicate a network error, an error reading from the CD-Rom, or a problem with this package.''
I am relatively computer literate and I have tried everything to try to overcome this. It's so frustrating.
Would really appreciate someone letting me know what I can do?

Hello,
Is you library located on the internal drive? My first suggestion would be to repair permissions using disk utility.
Mac OS error -54 (permErr): permissions error (on file open)

HT1925 I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes

I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes. Is there any other way I can accomplish an upgrade without using the Itunes.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Madwifi-utils cannot be found

Similar Messages

Maybe you are looking for