BIOS Flash Utility Fails with "BIOS directory cannot be found"

I download the 32-bit BIOS update 6fuj35us.exe and ran through the ThinkPad BIOS Update Utility Setup Wizard. After I click Finish I accept the option to update my BIOS. It fails to start the flashing process, with the error popup: "BIOS directory cannot be found. The utility process cannot be completed." I tried the ISO image too, it burned and booted up correctly, but I got the exact same error message when I tried to run the flash.
Has anyone been able to get over this issue?
Thank you
Solved!
Go to Solution.

I had to send my machine back for a motherboard replacement. Fortunately, they turned it around quickly, two days, as quickly as the shipping allows.

Similar Messages

WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

10g : WriteToFile always fails with 'invalid directory path'

Oracle 10.1.0.3.0
Microsoft Windows XP Service Pack 2
I can't use XMLDOM.writeToFile. Always fails with 'invalid directory path' :
SQL> create directory c_root as 'C:\';
Directory created.
SQL>
SQL> declare
2 doc xmldom.DOMDocument;
3 root_elmt xmldom.DOMElement;
4 begin
5 doc := xmldom.newDOMDocument;
6
7 root_elmt := xmldom.createElement(doc, 'MessageBatch');
8
9 xmldom.writeToFile(doc, 'C:\docSample.xml');
10 xmldom.freeDocument(doc);
11
12 end;
13 /
declare
ERROR at line 1:
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 33
ORA-06512: at "SYS.UTL_FILE", line 436
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 86
ORA-06512: at "XDB.DBMS_XMLDOM", line 4451
ORA-06512: at line 9
This happens with any OS directory with write permission for Everyone.
Also tried with UTL_FILE_DIR = *, same outcome...
Thanks in advance,
Hugo Leote

Look like bug 4477774. A possible workaround, somewhat unsafe, is to set UTL_FILE_PATH to '*', which will require a server restart. You then specifiy the path with unix style '/' rather than dos style '\'. You may also be able to use a path with unix style '/' rather than '*', although the bug description does not make this clear.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

Upload image in PA30 for a pernr getting error 'Either no file exists in the directory or the directory cannot be found'

Hi ,
I have uploaded image in AL11 and trying to link to thorough OA_UPLOAD_AND_LINK program. But when crosschecked it is existing there.
passed values in selection screen link below= >
while doing it an error is coming 'Either no file exists in the directory or the directory cannot be found'.
Directory is identified by program but file does not.
Any solution?
P.S. files are uploaded and saved in JPG format

Try to clear the flag "Processing in Front End", in this way the program will search for the file on application server and not from the front end.
Or select a file directly from your computer.
Regards.

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it say The Operation could not be completed...The file or directory cannot be found...help.. ?Derek

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it says The Operation could not be completed...The file or directory cannot be found...help.. ?
Derek

See if this solution works:
https://forums.adobe.com/thread/1623951?q=contact%20sheet

"workflow.asmx" method The request failed with HTTP status 404: Not Found.

When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
Error details: {"The request failed with HTTP status 404: Not Found."} " at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)\r\n at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)\r\n at System.Threading.ThreadHelper.ThreadStart()"

Hi,
For a better troubleshooting, I suggest you to do as follows:
1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
2. On client side you can also access Workflow.asmx from IE to see if it returns error.
3. Check the link below:
http://www.mail-archive.com/[email protected]/msg02092.html
If you want to operate the workflow in Client-Side, we can use Client Object Model in SharePoint 2010 to achieve it.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Outlook 2013 Exchange 2013 Address Book Error 0x8004010F : The operation failed. An object cannot be found.

Hi,
We have Exchange 2013 running in our network, and are using Outlook 2013 on all PCs. We added some users several weeks ago, and they are not showing up in the Address Book. When we try to download the Address Book in Outlook, we receive the error 0x8004010F
: The operation failed. An object cannot be found.
Please let me know how I can start to troubleshoot this.
Regards,
Chris

Hi
There is a multiple reason to receive an error 0x8004010f, it is just a generic MAPI error.
Let’s check all settings are configured the way it is supposed to be: -
1.   Make sure the authentication setting is set up properly by using this command: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *Auth* -AutoSize
2.   Check URL’S are configured properly: -
Get-OabVirtualDirectory -ADPropertiesOnly | ft Identity, *url* -AutoSize
3.   Check the location of OAB: -
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
4.   Now find out the location of the database on which the Arbitration mailbox resides: -
Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like “*OAB*”} | ft Name, Servername, Database
Get-MailboxDatabaseCopyStatus MGUxxx
5.   It is also important to ensure all database has the OAB set up properly for this use CMDLET: -
Get-MailboxDatabase | Ft Name, *book*
6.   If one or more database does not have OAB setup, then use CMDLET to set OAB for it: -
Get-Mailboxdatabase | Set-MailboxDatabase -OfflineAddressBook “Default Offline Address Book”
7.   If the issue is affecting only one or specific set of users, then check they have an OAB specified on their account: -
Get-Mailbox abc.xyz | fl Name, OfflineAddressBook,Database
Please correct me if the information that I am having is wrong.
Reply awaited.
Thanks and regards
Ashish@S
Ashish@V

Export to Excel Fails with "Internet Explorer cannot display the webpage"

We have a couple of report servers all hosted internally on VMs. They are all SSRS 2008 R2.
For all of these, when viewing the reports remotely in IE, they run fine. However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
There are no other errors and it never progresses to save or open.
THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
Does anyone have any suggestions?

Hello,
Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
Run the Network Diagnostics tool in Internet Explorer.
Reset the modem or the router.
Use the Delete Browsing History feature.
Use the Internet Explorer (No Add-ons) mode.
More detail information, please refer to the similar issue below:
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Been trying to access any service iTunes has, but am stopped with, "The Folder Cannot Be Found." Any fixes?

Hello. I've been trying to use any of the functions in iTunes, but to no avail. I seem to be stumped with the window that keeps popping up, telling me, "The Folder Cannot Be Found." Any advice?

Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

Can anyone help with a volume cannot be found message?

I would like to open backed up files (on an external drive) on a MacBook. The files were saved from a MacBook Pro. I get the message, "The volume cannot be found." Most folders appear to have a little black curved upward arrow in the lower left corner. What does this mean?
Thank you.

Mylenium wrote:
Split the layer, dial in the last value manually, not with expressions.
Mylenium
Ah, split layers, a fabulously useful, often overlooked, elegantly simple solution to so many seemingly impossible challenges.
I remember when you had to do that manually.
ONe thing to keep in mind on this project, if you change the audio that feeds the meter the settings at the split will need to be changed. Later, as your experience with After Effects grows, you will be able to figure out how to do this using an expression and a parenting setup so the information at the frame where the split occurs is passed up the line.

After connection lost SetVector fails with OCI-22303: type not found

Hi there,
I use statelessConnectionPool and after application is loosing connection to oracle for short time, all folowing setVector calls will fail with
SetVector fails with OCI-22303: type "DEMO"."PROPERTIES" not found
however its there and was working fine before connection was lost,
As far as i read about the getConection for statelessConnectionPool will reestablish connection if required to return valid connection handle, but somehow the setVector does not work.
Any idea?
Thanks in advance
Andrew

Hi,
I want to reconnect to same instance, I think i missed tnsnames part, did not knew its required, so i should add to client tnsnames or server the FAILOVER_MODE part?
like this example:
PAYROLL =
(DESCRIPTION =
(ADDRESS =
(COMMUNITY = TCP.world)
(PROTOCOL = TCP)
(HOST = VSERVER)
(PORT = 1521)
(CONNECT_DATA =
(SID = HR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 15)
strange thing that connection seams to be valid only in complains about type not found, or maybe connections are not valid only i cant see it, does the not valid connections in the pool are reconnected or make new when i call GetConnection? or i should terminate connections on "end of comm channel error" so when db is reachable again it will reestablish new connections?
Andrew

Install-CsDatabase Command Execution Failed: the network name cannot be found Lync 2013

Hi, I'm having problems when trying to create a new central management database on Lync 2013 to move the one from Lync 2010.
I'm executing this command:
Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of your SQL Server> -SQLInstanceName <name of instance>
The user is member of RTCUniversalServerAdmins and is a SysAdmin on the SQL Server.
Any ideas are appreciated, thanks!
Eduardo Rojas

Hi, thanks for your response,
The server does respond to PING using the DNS name.
I turned on network discovery and verified I can telnet to the port that is using for SQL, however is not the normal 1433, is another port (1439) , so I don't know if that is needed to be specified when excecuting the command and how to do it because I haven't
been able to see a port switch on the Install-CsDatabase command.
I also specified the correct instance for Lync, is the same server I used to install Lync Server 2013.
when Excecuting the commando it starts generating a lot of information when trying to create the database, it's not like it just doesn't find the server and throws the error immediately.
One of the things it says before the error is:
Attaching database xds from data path \\server\c$\csdata\... and the path.
The operation failed because xds is DbState_NonExist.
Attaching database failed because one of the files not found. The database will be created.
State of database xds is DbState_DoesNotExist.
Creating database xds from scratch. Data file path = c:\csdata\centralmgmstore\... and the path.
Then the error is generated: The network name cannot be found.
Any other ideas on how to fix this?
Thanks.
Eduardo Rojas

BIOS Flash Utility Fails with "BIOS directory cannot be found"

Similar Messages

Maybe you are looking for