Magenta cast on one account printed pic, not another

When I print a pic on my Canon 9000II printer, it has an overall heavy magenta cast.,  Printing the same pic from my wife;s account, normal color.  Any idea where there is a setting I can change in my account to give proper color?  I have recently installed 2 photo apps----Sigma SPP 5.5, and Iridient digital photo developer.  IMac 27, OSX 10.6.8 fully up to date. 2 accounts, mine and wife's, both administrator. 

For number 1, login to your wife's account (or have her do it if you don't know her password), then open the System Preferences and click on Displays. Click on the Color tab. The profile highlighted in gray is the one being used by that account:
Then you need to find out if it's in the main root /Library/ColorSync/Profiles folder, or in her user account Profiles folder (~/Library/ColorSync/Profiles). To find out where it is, click the Open Profile button. The ColorSync Utility will open and load the profile. You're not going to modify it, just find its location. Command click on the name of the profile at the top of it's window. The path will be shown. In the case of my profile, its in the root Library folder:
If it were in her user account, it would read from the bottom up as the Computer_Name > Users > her_user_account_name > Library > ColorSync > Profiles. Close ColorSync Utility. If you accidentally changed something (unlikely) and it asks to save the file, quit without saving.
If it's in the root Library folder, you don't need to do anything other than login to your account and then choose the same profile in the System Preferences. If it's in her user account, while you're still logged into that account, copy the profile anywhere into the root Library folder. Logout and login to your account and move the copied profile into the Profiles folder of your user account. Then choose that profile in the System Preferences.

Similar Messages

  • Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

    Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • More Magenta Cast in Epson 2200 Prints

    I know this has been discussed to death, but in comparing prints between Aperture 2.0, LR, and PS, I stumbled on an interesting result. We all know that some legacy printers do not support 16 bit data paths in their drivers, and that applications that support 16 bit data paths like LR don't print to these printer correctly, and supposedly, Epson (and others) need to update their drivers. Well, by accident I set the wrong parameters when testing Aperture 2.0., and I didn't turn off the driver color management. The print I got was IDENTICAL to the prints I have been getting from LR. So it appears that LR's color management is getting double managed, as if the driver color management was not turned off, and that is creating the horrible magenta cast. Aperture 2.0 supposedly implements 16 bit data paths, but for some reason, it does not fight with the printer driver. It prints just fine. Maybe this data will help figure out, if even for Epson, what is going on.

    DYP
    Well ... yeah ... I know. I have no problem printing in LR.
    Doug,
    Are you using Epson papers and Epson profiles? If so, no change to make; however, if using non Epson paper with non Epson profile, you need to set the profile you specify in LR using the ColorSync Utility->Devices->Your 2200 printer->Paper specified in driver->(click on drop down to change default) Other->navigate to the specific profile set in LR for LR managed. Worth a try, even if though your driver is not updated. I'd be curious if it works.

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • PS documents prints on one laser printer but not on another

    I have had to replace a Laser printer with a new one due to hardware failure. Old printer was able to print fonts etc. New printer is not printing the fonts. All that seems to print out is the font and spacing information.
    Apart from the printer change nothing else is different.
    Was using HP LJ4000 now using HP LJP2015N
    Any ideas?

    Hi Rebecca,
    Please check which ppd file have you used to configure the new printer.
    You can use the recommended ppd file to configure your printer(HP LJ 2015). You can download the post script ppd from :
    http://openprinting.org/show_printer.cgi?recnum=HP-LaserJet_P2015
    Please let us know if this does not resolve your problem.
    Regards,
    Rishi

  • All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

    HP staff  help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack.  The Firmware is PNP1CN1521AR. On August 1, 2015,  I purchased an HP all-in-one 6830  printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter  sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally  after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
    There seems to be a  6830 printer firmware or hardware problem causing this. HP  should be able to confirm this problem on 6830 easily.
    Please advise ASAP.
    Thanks 

    It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
    The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
    I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

  • Sending from one account shows up as another

    I am sure that there is something very simple in the settings that I am missing. My primary email account is a verizon one and it is linked to my Mail on my iMac and MacBook. When I send an email from my iPhone's Verizon account, however, it is received as if it were sent from my gmail account and consequently replies go there. This is not a critical issue, but just bothersome because I use each account for a different purpose and I am ending up forwarding then from one account to the other.
    How do I correct this? It's almost like I set something as a primary account, but I can't find out where that may be.
    Thanks.
    Carole

    Hey all,
    I suspect I'm having a similar problem. For some reason my primary server "smtp.mac.com" won't send messages so the iphone uses my next preferred server "smtp.gmail.com" to send messages. The problem here is that the replies then go to my gmail account (which for me is picked up by my mac and not my iphone).
    This is a big problem for me as I sent an important email today from my iphone and received no reply which (in the context) meant everything was fine. However, I only found out much later in the day whey I got to my computer that in fact everything was not fine and I almost had to cancel meetings to be somewhere the next day all because the apple stuff is just dropping the ball when it comes to actual functionality for business use....
    Anyway, I'm trying to find a solution. If I do I'll post another response. So far I'm looking at ditching mobileme (which is what I currently use as a free trial) and just using gmail and gmail calendar instead.

  • My new messages do not appear in bold in one account but do in another

    I have 2 accounts in Thunderbird. In one of them the new messages show up in bold, in the other they do not. How can I fix this?

    Restart Thunderbird with your add ons disabled and see if things improve. This can be done from the Help Menu.
    If this fixes things, start turning each add on back on until you find the troublemaker.

  • My HP photosmart 2610 all in one will print by not allow me to save or send a scan

    My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan.  i assume it is a bug with maverick.....which i recently downloaded

    Does this thread help?
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

  • Can't open attachments on one account but can in another. Something within the one account not functioning?

    When I click to down load the attachment in one of my Yahoo accounts, the box telling me a virus scan runs and finishes showing "Scanning is complete and no viruses were detected" then i click the Continue button which simply disappears and nothing else happens.
    If I forward the same email to another Yahoo account and go through same procedure, the attachment opens and I can Save it or Open it, which seems to indicate the problem is lying within my account . . . but where?
    thanks in anticipation
    Ciro

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Unable_to_save_or_download_files
    *https://support.mozilla.org/kb/Unable+to+download+or+save+files

  • HP J6410 all in one wireless printer will not print

    Use windows 7 on my HP laptop and windows vista on my HP desktop  J6410 printer continually fails and error message says printer offline  works great with desktop and only fails when using laptop It therefore is only failing to communicate with laptop.  help!!!!!!!

    How is it connected, USB or Wireless?
    If you are USB, you may want to try another USB cable.
    The next time it goes offline, try running the Print and Scan Doctor.
    http://goo.gl/u3jDE
    Let me know if this helps.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Can I migrate rules from one account in Mail to another?

    In mail I have 90 rules, many multi line criteria. I have just created a new  imap account linked to fastmail. My rules wont run because they seem to be linked to my first account, not imap. I tried just duplicating them and re-mapping to the new "move to" folder. Wouldn't run. Added a new criteria for the account but then all mail will go to that folder since 90 rules include that account in the rule. This would work if there was 2 levels of logic in the IF command but alas its only IF ANY/ALL.
    I really don't want to re-write all my rules as some have maybe 10 lines of criteria in them. Any suggestions?

    Transferring files from one User Account to another

  • I have an ipad 2 and want to have one account for home and another for work, how do i do this?

    I have an Ipad 2 and use it for work, I want to run a second account for home, how do I do this?

    What kind of accounts? Multiple email accounts are supported.
    Multiple user accounts are not.
    If you are saying you would like to have one set of apps, media, etc
    for work and a different set for home, and switch between the 2
    depending on network login or location, this is not a feature of iOS.
    If this is not what you are asking, please post more details so someone
    may offer a solution.

  • Safari doesn't work in one account but works in another.

    I have an interesting problem. I downloaded the 3.1.1. update (no problems), installed it (no problems) and restarted (no problem). After restart went to launch Safari but with no luck. It would simply freeze and not start up. Logged into another account on the same machine and lo and behold it worked fine. Could someone help me find a solution to this as it has become very frustrating. Have tried to reinstall, delete Safari, restart and the reinstall. All to no avail. Still works on the other accounts. Thanks.

    It might be a file(s) in your InputManagers folders and/or a SIMBL file.
    Try the following:
    Quit Safari.
    Drag the 'InputManagers' folder out of the Library.
    HD/Users/yourhome/Library/InputManagers <- +(if you have one here)+
    If you have a 'SIMBL' folder in the 'Application Support' folders move it out.
    Also, remove any third-party Safari add-ons from the 'Application Support' folder.
    HD/Users/yourhome/Library/Application Support
    Remove any files from your 'Internet Plug-Ins' folder.
    HD/Users/yourhome/Library/Internet Plug-Ins
    Good luck,
    Tom

  • Page loads in one user accnt, but not another

    I thought this was a flash problem, so posted with that premise yesterday. I am posting again with new context:
    17" MacBook Pro, 10.6.4, Safari 5.0, Firefox 3.6, Chrome, HD about 60% full, lots of RAM.
    My MBP has two user accnts:
    1. MyHome - daily use/configs
    2. Test - used only for trouble shooting, all on defaults, no user configs.
    For a certain project application page I need to access:
    1. MyHome accnt cannot load the text and widgets in Safari, Chrome or FireFox. I just see a grid with blank fields & slider bars.
    2. Test accnt loads the page with full functionality in Safari, Chrome and FireFox. Text, fields and links/widgets all display and function as intended.
    I trashed Safari & Firefox prefs, uninstalled & updated FlashPlayer, repaired permissions, checked Network configs are same in both accnts (incl DNS), FontBook find&reconcile duplicate fonts. Multiple logout & restart.
    Neither user accnt has anything in LIbrary/Internet Plugins.
    Also, the page functions properly when accessed via another Mac running 10.5.xx & Safari 5.
    I have not encountered other pages which do not load with the MyHome browsers.
    I don't think this is a modem, browser or Flash problem. Fonts?
    How can I troubleshoot? Any advice appreciated.
    Thx

    Excellent, macjack - It was the fonts, sort of. First I looked at the things you suggested for elimination after a SafeMode start:
    *No Login Items in either account.
    *No folder named Contextual Menu Items in HD/Users/MyHome/Library, so nothing to move.
    *No items in HD/Library/Contextual Menu Items, so nothing to move.
    I did not execute a SafeMode start.
    MyHome/Library/Fonts folder would not be removed, so I moved the contents to desktop.
    Also found a Fonts folder in Aps/Microsoft OfficeX/Office and moved it to desktop.
    Then I did the dance - replace half, restart, test . The page loaded at each phase, including the last one. All the fonts are back in their folders - This was all move, not copy.
    Everything seems to be same as start of problem, but now the problem is gone. Maybe something to do with that old MS Office X suite?
    I will mark this thread answered by tomorrow and award a star to macjack. But I want to leave it open for further comment or question.
    Thanks again macjack
    -B

Maybe you are looking for