Mail accounts fail after a few hours

iMac 24" OS 10.6.8 / Mail 4.6
A month ago my Mail accounts intermittantly stopped connecting to the incoming and outgoing servers, and as of last week the connections are completely down.
I use two email addresses associated with my own domains; one is a .com and one is a .me. Each address has a POP account in Apple Mail, though of course the incoming and outgoing server settings and ports are the same for both accounts.
When I run Connection Doctor, sometimes I'll get red lights indicating failures, and some times I get a green light on both inbound and outbound connections on both accounts. Whether it's red or green doesn't seem to matter, as the mail doesn't send or receive, no matter the test result.
I was running Sophos, so I uninstalled that and re-booted.
I've re-booted the modem and checked for firmware updates, though the internet connection hasn't ever been a problem.
I deleted the Mail accounts, deleted the Mail plist file, deleted the passwords from Keychain, and re-created the accounts from scratch. Both accounts ran (hello to a month's worth of never-received emails!) for a short while, but within a few hours neither account would connect to the servers. The error messages vary, either  "Cannot connect to the server, would you like to try another server?" or "Enter the password..." Neither server ever works, and passwords aren't recognized.
It gets weirder. I have another iMac running 10.8.5, and the .com account operates without fail, while the .me account cannot connect - even though the settings are identical. When I try to send from the .me account I get a dialog box asking me to try the .com account's server, which works every time. Mail flows flawlessly to both accounts on my iPod Touch 4th Gen, and to my MacBook Air.
My host is Godaddy, my ISP is Century Link. Both accounts are fully functional via Godaddy's webmail-based servers. Century Link has no suggestions. Does anyone have a wizard of an idea?

No 
Solution may be found if you search in the "More Like This" section over in the right column. 

Similar Messages

  • Mail.app fails after a few minutes

    I've gat a really annoying Mail.app behaviour.
    The setup:
    Mac OS X 10.4.10 server with Xserve RAID (broken mirror ...)
    Mac OS X 10.4.10 client
    user has home directory on the RAID auto-mounted per afp
    Mail.app V2.1
    The app is run on the client, the home directory from/to which it reads/writes data is on the server.
    Mail will start fine, then, after the first successful read of all imap accounts (the mails from there are visible and accessable), it will sooner or later barf at me, complaining that the home direcrory is full and that it cannot access any files. (After which I can [and do] quit or retry.) Or, that there are lock files.
    The home directory is definitively not full (89% disk usage on the server). I have removed the Envelope Index-journal file several times (the presence of this will prevent mail from fetching new mail from the imap servers) and have also removed the Envelope Index file, letting Mail.app rebuild all indexes. The problem just keeps re-occuring! There is no other user on this account.
    It could be a network problem, as our network compontens have been acting up lately, but I'd be interested to know if others are also experiencing this kind of thing.
    Robert

    I've gat a really annoying Mail.app behaviour.
    The setup:
    Mac OS X 10.4.10 server with Xserve RAID (broken mirror ...)
    Mac OS X 10.4.10 client
    user has home directory on the RAID auto-mounted per afp
    Mail.app V2.1
    The app is run on the client, the home directory from/to which it reads/writes data is on the server.
    Mail will start fine, then, after the first successful read of all imap accounts (the mails from there are visible and accessable), it will sooner or later barf at me, complaining that the home direcrory is full and that it cannot access any files. (After which I can [and do] quit or retry.) Or, that there are lock files.
    The home directory is definitively not full (89% disk usage on the server). I have removed the Envelope Index-journal file several times (the presence of this will prevent mail from fetching new mail from the imap servers) and have also removed the Envelope Index file, letting Mail.app rebuild all indexes. The problem just keeps re-occuring! There is no other user on this account.
    It could be a network problem, as our network compontens have been acting up lately, but I'd be interested to know if others are also experiencing this kind of thing.
    Robert

  • Just installed thunderbird on new computer having used it for years on old laptop. Why do my mails disappear from my inbox after a few hours. Can I change this?

    I had Windows Xp on the old laptop and used Thunderbird for ages, but have now installed the same version of Thunderbird on a new laptop with windows 8.1 and it is quite different. How can I stop it removing the contents of my inbox after a few hours. Its very frustrating when you dont want to reply to an e mail immediately but lose it overnight!

    http://kb.mozillazine.org/Disappearing_mail

  • TS3899 I currently have  live email account but after a few weeks it stops sending me a message to let me know I've got mail. Is there any way this can be sorted as I need notified of mail as it comes in through work. Thanks

    I currently have a live email account, but after a few weeks it stops notifying me that I've got mail. Is there anything I can do as I need notified of incoming mail for work at all times

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • Iphone 5s - IBM  Notes Traveler 9.01  -Unable to move messages to trash after a few hours

    I have a problem with one of my Iphone 5s users.  Everything was working with his IPhone 4S, but the phone died and so they replaced it with a 5S
    We are using an IBM Lotus Notes 9.01 Server  (latest FP patch) and Traveler 9.01 FP4 with the iphone 5 s.
    On his Iphone 5S  we install  Notes Traveler...  Everything works on it, but after a few hours  we not able  to delete messages on the IPhone.  When he clicks Delete on a message  on his Iphone,  it comes back saying it is "Unable to Move the message" 
    If I remove Traveler and reinstall it, he can delete the messages for  a few minutes or even  a few hours, but then it comes back and says it cannot move the  messages when we try to delete the email on the Iphone 5S.   The Iphone had   7.1.1 OS...  I updated it to latest Apple 7.1.2 OS on it..  Same problem.   We also have an AOL account on the Iphone ....that works fine...      All other Traveler users on Iphones  4S or 5S users are working Fine...  
    I had IBM look at it.  They did some testing and the  email deletions only appeared on the logs when   it synchronized to Traveler, but when the problem occurs...  it never did show anything in the Notes logs, about the Delete request.   They are saying it is an Apple problem.
    I even reset his IPhone 5 S to factory defaults and re-setup Notes Traveler and after a few minutes or a few hours... When he deletes a email he gets the  Cannot move the messages again.   I opened a bug report with Apple by never heard back from them.  All other functions of the email work..   He can send and receive emails...  He just cannot delete after a few hours.  I ran checks on he email database and everything comes up OK...

    That's odd.  You will probably have to contact Apple support on this one.  I'm not sure if their is a problem with your account or a server glitch at their end but in either case, they will probably have to look into it for you.  You can reach them here: http://www.apple.com/support/icloud/contact/.

  • I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

    I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Yahoo e-mail automatically deletes after a few weeks

    Why does my yahoo
    e-mail automatically disappear after a few weeks

    Welcome to Apple Discussions.
    Many e-mail clients have an" automagically empty" the timer on them... in Mail it can be accessed from Preferences->Accounts:Mailbox Behaviors you can have timers on sent, junk and deleted items folders.

  • HP software loses connection to printer after a few hours

    I have been having this problem since I bought my HP Deskjet 3052A a few months ago.  There is a program in my Startup folder called "Monitor Ink Alerts - HP Deskjet 3050A J611 Series (Network)."  It works fine when I start up my PC, but invariably after a few hours, I will get a message (and an icon in the system tray) saying that it has lost connection to the printer (I do not have the exact message at this time).  The message also says that wireless scanning is not available.  At that point, my PC will not print to the printer, although wireless devices using HP ePrint still are able to print.  Restarting the PC will fix the error.  I have set the printer up with a static IP address to try and fix the issue, but it continues to reoccur.
    My PC is a Dell Dimension E520 running Windows XP Media Center Edition Version 2002, Service Pack 3.  It is connected via network cable to my Netgear N600 Wireless Dual Band Gigabit Router model WNDR3700.  The printer is connected via wireless to the same router.

    I too have this problem and for no apparent reason.  The only thing I can link it to is, if I print a letter and then go into mail merge to print the envelope it allows me to print the envelope(s) but then loses the wireless connection when I go back into trying to print letters. 
    It really is a pain because I have to stop what I am doing and spend time going through the set up procedure again. Not difficult (except for the faff of having to take the printer to the pc and connecting the USB again) but time consuming and very disruptive to my working day.
    I have another problem with printing a document and getting gobblygook, but that's for another thread and I will search for this.

  • I download a lot of music thru firefox. After a few hours, the files that I are ready for downloading, just don't download and I have to reset the same by going

    I download a lot using firefox mozilla and after a few hours, the downloads that are set in queue fail to download and I have to reset the same by going to the site and downloading the same again. Is there a solution to this problem?

    Try to use an external download manager.<br />
    Such programs usually have more options when it comes to downloading a lot of files.
    You can use the FlashGot extension to integrate an external Download Manager in Firefox.
    * FlashGot: https://addons.mozilla.org/firefox/addon/flashgot/

  • Emails deleting themselves on Blackberry Pearl after a few hours

    I have set up an Email account on my Blackberry Pearl for a UKmail Exchange email account so I can see my emails on my Blackberry. However after a few hours the incoming emails are deleting themselves only leaving the sent emails. Emails are deleting themselves before I can see them.
    I've looked in Email Settings but there doesn't seem to be anything I can do to stop them. Has anyone had the same problem?

    Check and see if your WiFi is on. I had (have) the same problem when I leave it on and go to work. The phone constantly searches for WiFi and the battery at a record pace. I turn it on only when I am at home or where I can access WiFi, other times I leave it off.
    I also hear the Ebay app is a huge drain.
    I also limited the home pages, I had over twelve that i think were constantly updating. I limited it to one.
    Maybe one or all of these will help.
    Regards.
    It's always funny when it's someone else.

  • Unable to boot Z10, stuck on loading screen at 99% after a few hours.

    Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions.  Running a Bell Canada 10.1.  Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%.  I tried plugging it in BB Link and computer will not recognize it.

    dazedandconfused wrote:
    Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
    I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
    I've answered your thread already, here: 
    Re: Z10 stuck on loading logo on starting up
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • A few thoughts and experiences after a few hours using my new ThinkPad E440 with Win 8.1

    After waiting 36 days for my new ThinkPad to arrive, I guess I'm just "eh" about it after using it some. Here are some of my thoughts, opinions, and experiences I've had after using it for a few hours... Hope this helps other people.
    I should not be surprised because I read all the reviews, but the touch pad really sucks. I hate everything about it, the way it clicks - it's so loud and clunky! - and it's insensitivity (and I adjusted this to be more sensitive). Thank goodness for the track point. I love that thing.
    The touchscreen stopped working after a few hours of use. After I rebooted it came back. Is this a bad omen? Or did I inadvertantly turn it off? Is that even possible? I am new to Windows 8 so anything is possible.
    The touch screen, when it's working, is not very responsive. It's MUCH LESS responsive than my Samsung Galaxy Note 2 Android phone or my LG G Pad 8.3 tablet. This is very disappointing.
    I ran the hardware scan that is in the Lenovo Solution Center and got a warning under the category "Local Connection Test". I looked at the list of System Events and it's very long. The first application error event name is MpTelemetry. Response is "Not available". The next one is "PnPRequestAdditionalSoftware". Response is "Not available". And the list goes on and on and on for pages. I have no idea what to do about this or what it means.
    Also in the Lenovo Solution Center, under Software, there is a Critical Alert that says I never updated Windows. But I did when it prompted me to while it was first booting up and it was updating and installing things. Where it says "To update your operating system, you must run Windows Update", I click on the Launch button and it takes me to Windows Update where it says No Updates are Available. Go figure. It also says there have been 9 Windows updates made to the computer. I guess I'll have to just always ignore that Critical Alert.
    In the system tray, it says "ThinkPad OneLink Dock Detached!". I don't have a dock... So, yes, that's true, it is detached.   I'll have to hide that one.
    I realize there is a Lenovo Recovery Partition on the hard drive but I would really like to create a set of recovery disks before I start customizing this thing, installing apps, and moving my files over. I can't find anything that tells me how to do it. Under the control panel, there is the Recovery icon. The only choice there for creating recovery media is to create a Recovery Drive, not disks. I'll post a separate item to get information on this.
    On the positive side, I have had it in my lap the whole time and it's not gotten too hot for my legs. That's a big improvement on my old Toshiba Satellite Pro.
    This locating the Fn key to the left of the CTRL key decision must have been made by someone smoking crack. Why would anyone in their right mind want to do this? We've had the CTRL key on the outer left edge like, FOREVER, why move it now?? This will be something that will take me a long time to adjust to - if I ever do. I use the CTRL a lot for cutting, pasting, and formatting things in Excel and Word. It's going to be a battle. I wonder if any software exists that allows you to redefine the keys? Speaking of location of keys, I keep hitting the Page Down key when I want the Page Up key. I'm used to the Page Up key being above the Page Down key instead of to the left.
    After being told here in the forum that the fingerprint reader was not an option in the US I am pleasantly surprised to see one on my new ThinkPad.
    I use the right-click on my mouse often. For example, to open a link in a new tab instead of switching to the new URL. For some reason, when I click on the right part of the touch pad when the mouse is located over a link, it just opens the new URL instead of giving me options for opening the URL. I'll have to figure this out.
    So anyway, I guess that's more than a few things... hope this is useful to someone...

    You can change FN and CTRL key in the BIOS

  • After a few hours of inactivity , my screen goes white with a flashing file folder in the centre with a question mark in the centre of said folder. at this point i can only unplug the computer for it to reboot properly, then it is fine till the next go..

    After a few hours of inactivity, I return to find a white screen with a file folder in the center of the screen with a ? mark in the centre of said folder and both are flashing...am i compromised?

    No 
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Mac book pro mid 2009 shuts down after a few hour then will only boot after waiting and pressing power button numerous times. I am running mountain lion with most recent updates.

    Mac book pro mid 2009 shuts down after a few hour of use and then is very difficult to reboot. Sometimes I have to wait hours, sometimes I have to repeatedly press the power button and then it will slowly start a little longer each press untill it completely boots. It has done this three times know.  Each time I was watching a video.

    Try running the Apple Hardware Test - sounds as if you've hardware issues.
    Clinton

  • Macbook Air 13" Camera stops working after a few hours. Needs Restart to be functioning again. How do I fix this?

    Hello!
    The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
    Any suggestions?

    Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
    I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
    All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
    Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible?

Maybe you are looking for

  • Desktop manager problem with upgrade software

    Hi There, When i connect to the desktop manager it says that my device should be updated with the new software but then it runs through the program then says that it does not need to. I have the Pearl 8120 and its running on version 4.5.0.174. is thi

  • Custom error message on contraint violation?

    Hi All, I have a table with couple of columns where only value can be inserted but never updated. So the users do not have permission to update those couple of specific columns. So when the front end application which is a vendor supplied product iss

  • Indesign Exporting PDF is Huge

    I am trying to export a two page brochure as a pdf out of indesign. Resolution is fairly important...the document needs to be printed. Its 8.5X11. There are a lot of gradients/graphics in the file. The smallest I can export is still larger than 1 MB.

  • Phsp cc crashes at startup

    Thank you all, I'm the probleme is solved only with the new operating system win.8.1

  • Where to find Windows XP Value Added Package (VAP) for Portege R500

    Where can I find the VAR software for Windows XP for the R500 (SSD, without optical drive)? Because otherwise the fn keys won't function... I already tried to bypass the check in the Vista version. Then I choose custom and select some options. Some f