Mail and Wireless Router issue?

Hi,
I recently switched from a Linksys router which had no wireless capability to a Beklin N+ wireless router. When I received mail (Gmail) in Mail through my old Linksys, it would arrive with little to no delay. However, now when I receive email through the Belkin router, I get a substantial delay: a message could take 20 minutes to arrive in Apple Mail. For example, a message may be sent at 1 PM, and I'll receive it in my inbox in my web browser at 1 PM. However, Apple Mail won't retrieve the message for another 15-20 minutes. (Mail checks for messages every 5 minutes.) Changing the setting in the "Check for new mail" button from 5 minutes to every minute doesn't seem to help.
How can I fix this so that I can receive my email with less delay? Are there settings that I can change on the Network control panel l of my Mac?
I hope you can help. Thanks.
David

After further investigation, I think I may have found the issue: Apple Mail separates the general Inbox for "Mailboxes" and my Gmail inbox - they aren't reconciled.

Similar Messages

Infinity and wireless router issues

Hi Folks,
Thanks for taking the time to read this, if anyone has any similar issues or resolutions to the situation feel free to chip in..
We had Infinity installed a while back and noticed some intermittent connection problems, the issue was that wireless connections would suddenly loose the gateway and go offline but unusually it was always fixed by simply restarting the network adapter on the client machine, the wireless signals were always near full strength.
Later on I noticed that although the clients seemed to loose connection it actually appears to loose DNS and keeps existing connections live, example below, meaning that if you had fired up a streaming connection before the 'drop' it would continue to stream to the client perfectly although the client could not access any new connections(online).
The setup we were given on installation consisted of an Infinity wired(only) box that connects to our old wireless router which appears to be acting as a wireless bridge to the Infinity box.
Having been a BBI Tech for a well known ISP Customer Service Centre, using a process of elimination I am guessing that there is an issue between the old router and the new Infinity router that is causing conflicts to crop up.
**Example** A friend working out of the country was using a VNC client to logon to my machine as he couldn't access our DB servers from his location, he became confused when he was using my desktop and suddenly he lost online capability.... even though he was remotely logged into my machine to witness it he couldnt open any websites or connect to any DB's.
I would appreciate any input as im thinking that the best way to fix this would be to buy a new Infinity capable modem with wireless built in, but am reluctant to do so as the standard kit should work after being setup by the engineer..
In summary:-
wireless drops dns with signal full, (not a signal issue)
current connections stay open, (again not a signal issue or problem with the broadband)
cannot open any new connections, (not sure if this is dns based as cant even connect to direct ip's)
the clients have all been fine on other wireless networks, (not just tested on an individual, faulty adapter)
renewing the connection from the client fixes the issue, (something to do with lease times or bad routing maybe?)
The wireless router is one of the black homehubs.
Any help appreciated as im having to write this post using my 3G connection to ensure i dont get dropped.
Thanks
Mike

This is the setup left by the engineer...

Turned off power strip to DVR Box and Wireless Router...now I don't have internet connection..

I went away this past weekend and turned off the power strip that my DVR box and wireless router are plugged into. When I got home early this morning I powered them back on and I did not have an internet connection anywhere in my home. I restarted the router twice and still no connection. My computer says that connection to my wireless is "very good" but I get notice that computer "cannot display webpage" or "invalid web address". I left for work and have not tried anything else to remedy this issue. Ideas anyone?

Is your TV Service and Phone service if you have it working as it should? What does the router indicate as far as status lights go?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Trouble with Qwest DSL and wireless router

Just got Qwest DSL yesterday. Connected the Actiontec M1000 modem directly to our IMac and things worked fine. Unfortunately, our office doesn't have a phone line and the permanent home of the modem is going to be elsewhere in the house. I tried to connect our D-Link wireless router WBR-2310 Rangebooster G to the Actiontec, phone jack--ethernet cable---actiontec---ethernet cable---d-link wan jack. Airport can "see" the wireless network we had setup before we switched to qwest dsl, but cannot connect to the internet.
I'm assuming there is communication problem between the dsl modem and wireless router.
How should my network settings be changed? Do I need to reconfigure the modem, or the wireless router, or both?

{quote}
Now, I must say that the 3mbps download speed I'm apparently paying for has never been achieved. The fastest I got was 1.4mbps when hardwired. Now with the wireless I'm only around 750 kbps. I'm only twenty feet away and one wall from the router. Any suggestions on increasing this performance?
Very few sites can actually send you 3mb/s. You can test your connection here:
http://www.speakeasy.net/speedtest/
or here:
http://speedtest.net/
If your speeds don't seem to be inline then you will have to deal with your broadband provider.
At 54mb/s your wireless is not the bottleneck, the internet is.
I'm getting 6mb DSL and it tests perfect, but I wanted the extra speed because I'm running 6 or 8 machines online at all times, and you usually get a faster upload speed with the deal. This can be very important for sharing files and sending emails with attachments, etc.

Wireless Router issues with MacBook Pro and Windows XP laptops

hello,
I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

Hp photosmart 7520 - can fax, get calls but not receive fax with bundoed service and wireless router

I finally got the printer set up to my wireless router and am able to fax and receive calls but now I can't send a fax.
I have a bundled service phone, internet and cabl;e with voice mail.
I have reduced the number of rings to 2 and turned off automatic answer. ready to pull my hair out!!
HP tech service was no help and neither was the cable company. Got this far on my own but hit a wall!
any thoughts?

Hello @mull274 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into fax issues. I would like to help.
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fax Sending Fails Intermittently.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with Dell Printer and Wireless Router

I have a new Linksys Wireless Router (3100) and it handles 3 laptops, PS3 fine. But I have a Dell 715w network printer (also new). I have it set up on the network, and it works fine upon setup. The problem is the printer does not work all the time. Sometimes I can get an error message, sometimes it says it is busy, and other times it literally takes a long time to load and then does not print. I usually can get it to work again by rebooting and turning off the router and printer and laptops, but this hit or miss is very annoying and I never know when it will do this again, usually after a week or two. I wonder if the problem is that the 3 laptops all have different OS - XP, Vista and Windows 7. Dell tech support won't help as they say they don't support routers, but I am wondering whether the problem is ina s etting or if this printer is malfunctioning. any help would be appreciated

Yes. You have to key-in the IP address to the printer.
Basically, if the printer is set to obtain IP address from the router, it will be provided with a random IP or any IP available for the next device that will connect, on this issue, your printer. So there's no permanent IP address for the printer, making it a little hard to find at times. Compare it with the a static IP, your computer can easily map it since it doesn't change.

A very strange wired and wireless network issue

Hello,
I have never had any issue at all with my macbook (2008) until this week, I use it both for work and personal use.
Most of time, I'm used to be on customer site, so I use wired and wireless connections depending of the situation....
I have never had any issue at all with wifi neither ethernet connections during three years, until this week... and I can say this is the most strange thing I have ever seen....
Using wired or wireless connection, always the speed of network was really good, at home, many customers, etc never had any problem...
But this week I'm currently out of home, and the hotel where I'm staying I'm having very poor network rate....
Using wireless connection, the download speed is no more than 10kb.... and using ethernet I get less speed... but during the day I'm on customer site, using the ethernet connection and download speed is really good, more than 500k-800k....
I have already tried in the hotel few wifi connections (there are three) and differents wired connections (in diferent rooms) and the download speed is always the same, no more than 10kb...
During this afternoon, I could go into hotel's lab and could connect directly to the router using cable, same speed no more than 10kb....
The most strange thing is on their computers the download speed using wired connection is around 6Mb....
how is possible I'm getting no more than 10kb of download speed when the pc's at hotel using same wired connection gets 6Mb?
I have already deleted current network connections, execute onyx to clear everything, perform dhcp connection, tried manual ip etc, and always the results are the same...
I know there is no problem with the macbook, because it works pretty good at every location I've been... but until this week...
Sincerely I'm getting a little crazy here, I'll appreciate any help!!!
thanks in advance

I've seen something like this on my T400 when it was running Vista. Now that I use Win 7 it's been OK. I rather doubt that your issue is the same but I'm tossing it out here just on the off chance.
Im my case, I had to downgrade my Intel 5300 card to a 5100 (as suggested by a Lenovo 2nd-tier tech) to get things working.
My symptoms were a little different. Wifi was fine until I went back to a wired network. After that, trying to use the same wifi AP as before would end up associated, but no internet access. DHCP wasn't working. The GUI "find" app didn't work as expected either. Some APs showed up, and some didn't.
If I configured for automatic connection to my home AP it would try and fail. Just rebooting at that point would again attempt an automatic connection that would succeed.
What I have noticed now that I run Win 7 is that Access Connections is completely useless. Often the "finder" doesn't show an AP 3 feet away. I didn't notice that this happened after a switch from wired, but maybe.
Are you using Access Connections? If so, you might try uninstalling it.
Sorry I can't be of real help,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can't Get E-mail Using Wireless Router

Hi - For some reason we can't get our e-mail using the wireless router. Internet is working fine - only e-mail is giving an error that it can't get through to the POP3 server or something to that effect. Any idea what could be wrong? We've tried 2 different e-mail accounts and both won't work. Using our regular wired connection we can get right through to the e-mail so it's not the servers. Do we need to change something as far as the server requires authentication being checked or something? Thanks for any help!

We figured it out.

How to set up time capsule to transmit in 5Ghz and wireless router in 2.4ghz

I have a time capsule connected to my wireless router. After a 2 year use the 2.4 ghz wireless network transmitting from TC seems to have issues. I am trying to configure my TC to transmit in 5ghz and my wireless router (Cisco) in 2.4 ghz, but I cannot find such option
Thank you in advance

I do not think there is any option to disable one of the radios on a TC - it is in dual simultaneous mode all the time with no way to alter that.
Whether or not your Cisco supports that will depend on the specific model - check that models manual or on Cisco's site if you can alter the radios, and if so, how.
I have a NetGear WNDR4500 (aka n900) and it is pretty simple to do on that - in the web configuration, as admin, you simple check or uncheck the box for each radio in order to turn them on/off.
P.S. What if you just assign a new SSID to the radio you want off, and simply never set up your devices to connect to it? That should force them to connect to the other radio (assuming the device supports that frequency itself).

Conflict between ISP IP and wireless router

Hope I'm in the right place to ask this question.
I'm attempting to replace my current hardwired LAN router with an Asus wireless router. The problem is when the wireless router is enabled and connected, it assigns a dynamic IP address to the computer being used to access the Internet through my Verizon account. (UML290 wireless modem). Using the existing LAN all machines on the network have static IP addresses that work without a problem with respect to the UML290. But when the wireless router is enabled I can't connect to my POP3 mail or SMTP mail servers. Logon is denied by my mail service.
Is it possible to configure my home wireless router in such a way to avoid this conflict?
Each of the network computers are using USB PC adapters to access the wireless router.
Thanks in advance for any advice.

This is reference to a UML290 wireless modem, air card or whatever/however it's called. My 4G Internet service is over a wireless connection. I'm assuming Verizon assigns a dynamic IP at log on. It doesn't seem to matter if I log on to Verizon then enable my wireless router at which time it also assigns an IP address, or log on to my Verizon account while the wireless router is enabled. Either way my mail service will not recognize my computer.
Thanks for the reply.

Remote and Wireless Router

Hello All,
I installed remote on my iPhone yesterday, and today my wireless router doesn't work, it just seems not to work @ all. Probably just one those things but just want to throw it out there.

Use an ethernet cable and connect the ATV to your router. Download Apple Remote for the iPhone. You will be able to control your ATV this way. You can pair any infrared remote to your ATV once connected, following the directives from Setup > remote.

My iphone 4 wont allow me to connect to my home wifi or anyother i have reset my phone and wireless router and still wont allow me what is the problem ?

my iphone 4 wont allow me to connect to wifi of any sort i have rest the settings on my phone and my wireless router whats the problem

Use this article: iOS: Troubleshooting Wi-Fi networks and connections

Perplexing Wireless Router Issue! Please Help!

OK Guys and Girls, I could really use some help. I have a wireless router Mod. WRT54G ver. 2.0, and yes it has the firmware upgrade. The problem that I am current having is this, my computer can connect to the router no problem, and i can access the settings too, but it will not let me access the internet at all. It's not the cable modem because I can hook up my laptop to it and get internet. So in short the router isn't, for some strange reason, letting my computer access the internet but the router can access the web. Please any suggestions are welcome. Thank you in advanced.

Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter.
When it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....

Mail and Address Book Issues in 10.4.5

Hello:
I recently updated to 10.4.5 and have some issues with mail and address book.
1. MAIL: All the mail on my machine has been "reformatted" for lack of a better term. Each line in a paragraph is about 1.5" above the next. This is the same for all messages. This just appeared after I updated to 10.4.5. Suggestions? Has anyone else experienced this? If so, what was the solution?
2. ADDRESS BOOK: All of my addresses just have the name. Apparently, everything else has disappeared (Phone, e-mail, notes, etc.) Ex: John Smith... That is all I have for all 346 records. Naturally, I have the data backed up on .mac, but before I re-sync (assuming that works) I want to resolve the issue to prevent it from happening again. I have tried renaming files in the user>library>application support>address book from AddressBook.data.previous to just AddressBook.data to no avail. Any suggestions?
Thanks in advance!
Richard
G5 1.8 Single Mac OS X (10.4.5)
G5 1.8 Single Mac OS X (10.4.5)

You may want to review recent threads about similar problems in this forum before re-syncing your data with .Mac. Yes, it might work, but not the way you expect...
Lost all of my contacts in Address Book
address book completely empty!
iMac G5 17" (iSight) Mac OS X (10.4.4)

Mail and Wireless Router issue?

Similar Messages

Maybe you are looking for