Mail Delivery Error only when sending from certain email accounts

I posted in another thread regarding this however the problem has seemed to get more interesting.
On a whim i decided to change which e-mail account I was sending from and re-sent the exact same PDF document from my MobileMe(instead of Gmail) and it worked perfectly!! got the e-print confirmation about it preparing for printing and then whalla the print! Went back to try gmail and got the Mailer Deamon error again: 
Delivery to the following recipient failed permanently:
     [email protected]
Technical details of permanent failure: 
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.7.1 Command rejected (state 18).
could it be specifically related to Gmail or googles servers? Are there specific mail providers that work/don't work(for example MobileMe vs Gmail vs Yahoo, BlackBerry, etc...)
Any help is greatly appreciated in advance.

and while I had read that information and appreciate you re-providing that I'm still not sure exactly what that tells me. In both cases I was using Apple's Mail (once to send from a Gmail account which failed and once from MobileMe win succeeded) and then again from my BlackBerry handhelp(in which case neither account worked) 
since both Apple Mail, Blackberry and also Gmail are "tested" I'm assuming you're pointing out the "testing does not guarentee full compatibility"  portion of this statement which to me is misleading. If I'm using only "tested" clients but having problems it feels slightly dishonest to be marketing this product as complete. While I am optimistic about the many possibilities offered by this printer I am disappointed at present by the limited and seemingly premature release of "e-print" as a whole. 
Any other potential workarounds you can think of? 

Similar Messages

  • Error message when sending from hotmail exchange account on my iPhone 4

    "Cannot Send Mail - An error occurred while delivering this message". Please help!

    Here are the steps to setup Hotmail to sync and push to your iPhone (this works on the iPad too):
    Launch Settings
    Tap on “Mail, Contacts, Calendar”
    Tap onto “Add Account”
    Select “Microsoft Exchange”
    Enter your full Hotmail email address into both the Email and Username fields
    Leave Domain blank
    Enter your password
    Enter “Hotmail” as the Description
    Tap onto “Next”
    Now you must enter the server, use “m.hotmail.com” for the Server name then tap onto “Next”
    The iPhone will now verify that your Hotmail information is entered correctly, the next screen you’ll be able to enable Mail, Contacts, and Calendars
    You can then delete your original Hotmail email account on the iPhone (i.e. the one which you can't send emails from).
    Hope that helps.

  • I can receive all email but can't send from certain email accounts

    Hi,
    I am having email problems. I have several email accounts. I receive email on all of them, but can't send on all of them. Not even a reply. The email accounts that work are gmail and att.net
    The accounts that don't send are:
    1 account hosted by GoDaddy, and a few accounts on my 2 domains jackskalon.com and bigjackmagic.com
    all of these accounts work fine on my laptop via outlook 2007. The place that houses my 2 domains said they don't know why I am having this problem. Apparently I am the only one?!?!
    Thanks

    Now that you mention it, I do have that problem when travelling with my laptop and iphone.
    As far as SMTP. I am not very knowlegable about how this all works. When I set up the email accounts accounts on the iphone, the message came back "Verified" as I finished configuring the accounts. Email on My laptop works fine at home, the iphone doesn't. On the road, iphone and laptop have the same problem.
    I apologize if I am missing the point of what you are asking me.
    It's frustrating.
    Thanks for the replies!
    Jack

  • Mail will not send from designated email account

    I have several emails set up in Mail. Everything has been working great until a couple days ago. I haven't changed anything, made any updates, or added any new accounts.
    Let's call the two accounts A and B. My main account is A. When I am sending an email, A is my default. It is designated as such. When I send an email from account A, I double check in each email. It shows it is coming from that default account. However, my recipient is receiving the email from account B. I only know this because when they reply, their response shows up in account B's inbox. The weird thing? My sent email folder shows as being sent from the correct account-- account A.
    I have re-installed the accounts, double-checked everything.  The problem still exists.
    This is the weirdest issue. Anyone know what could be causing this?
    Thanks so much for the help.

    Probably because it is using the server of account B to send from. When it goes through B's server, the server changes the sent address to that of B's email address. Either you have the wrong outgoing server set up for account A or there is a problem with it and it's switching to account B's server.
    Open account preferences and highlight account A. Look at the SMTP server list and see which it shows. Select the correct one and check the box to use only that server for that account. If it fails in the future, you will get an alert that it failed and the option to choose another outgoing server.
    Make sure all information for that server is correct and that it has the correct user name and password. Once you get that working, do the same for account B and make sure it has the correct outgoing server and check the box for that one also.

  • Error message when setting up POP3 email account

    I have my phone setup with my Gmail account and my work accout. Both were working fine, but after a few weeks I could no longer send email from my work account. I would get the "Connection to the outgoing SMTP server failed" error message.
    I tried to delete the account and program it back in exactly as I had it before, and now when I try to save those settings, I get this message:
    "Secure connection failed - the certificate for "[email protected]" may be invalid."
    Our IT guys says all the info I'm plugging in is correct. Can anyone help??
    Thanks.

    closereach,
    It sounds like your SMTP server may be using a self-signed certificate for the SSL connection.
    A self-signed SSL certificate doesn't have the same authority as one that has been verified by one of the certificate authorities. It is kind of like the difference between using a business card and a photo ID. For many things the business card was sufficient ID, but when it comes to secured items like encrypted data, it is better to have an ID that has been verified by another authority.
    You should have the option to use it, and then continue on.
    If you do not have that option, its possible the certificate is not self-signed, but could be showing up as expired.
    Hope this helps,
    Nathan C.

  • Error message when setting up .Mac email account on iPhone

    Hi - I've tried Apple support, iphone support, and the submit a question/problem to the mac people with no luck. So, I'm taking my question to the next higher level -- you all.
    So here is the issue. I have had a mac email account for years. I buy my cool new iPhone a few weeks ago, and add my main apple mac email account to the iphone. All is good, and I can send/receive email messages from my main account. Then I add = three other email accounts I have on mac for internet/web surfing, and all is good there too. So, now I can access my 4 apple mac accounts on my iphone.
    Here is the problem -- a few days ago, my main apple mac account stopped working on my iphone. I can still send/receive email messages via web based mac mail, and I can access all my mail on my laptopn (just like usual). But, now, when I go to check my main mac account on my iphone it says unable to verify username or password.
    So, I have tried 100 different times now, all to no avail. I deleted it, rebooted it, tried it as a mac account, an IMAP account, POP account, etc.
    I have all the latest versions of itunes, iphone, etc.
    So, can anyone help me (pleeeese)......
    Thanks, Drew

    yeah

  • MacBook Pro iMessage sending from my email account and not my phone number... how do i change this?

    Hi i've had my phone and MacBook Pro connected for ages and recently my iMessage on my computer is now sending messages via my email address - how can i stop this? or rather change it back? i've just done the upgrade to Yosemite
    thank you
    B

    No, "My Number" was not listed in my Phone menu, I had to manually type it it.  Is there a way for that number to automatically be listed in that "My Number" spot?  Would that maybe have something to do with my phone number not being listed as an option in the "Send and Receive" spot under messaging???

  • Mail 8.2 Sending Messages from Wrong Email Account

    This has been happening more often than not lately on the Mail 8.2 app. It's driving me crazy, and really messing up my business since I have a professional email (using Outlook) and a personal email (Gmail).
    Both email accounts are setup on my Mac Mail. What has been happening is that when I write an email with my professional email (Outlook) and hit send everything seems fine and it will send (like it should!). It shows up in my sent messages in the Mac Mail app under my Outlook account and everything, great!... Oh, but the thing is, it doesn't really send from my Outlook account.
    When I log into my Outlook account on my web browser, the email is not shown to have been sent. But, When I log into my Gmail account on the web... What?! There is the message in my Gmail sent folder! How??? It has my signature from my Outlook account and everything. To add to the strangeness, when I look at my Mail app on my iPhone, it says that the email was sent from my Gmail, and not my Outlook...
    So, Mail on my Mac says sent from intended email account (Outlook), but in reality it somehow gets magically sent from my personal Gmail account... and shows up on the webpages and my iPhone as sent form Gmail... This doesn't happen every time. Just when Mail feels like it I guess, HA!
    This is frustrating. Since it doesn't happen all the time, I never know if people are getting my emails, but I finally got the fluke to happen with a friend. Voila, in fact when this happens even though it's being sent in Mail though my Outlook account, my friend receives the email from my Gmail account with my Outlook signature...
    What is going on? Is anyone else having this issue?
    I need my personal and professional messages synced to my iPhone and Mac, or I would just say good riddance to the Mac Mail app.
    I will just have to start sending my professional messages form the Outlook webpage until this is fixed. This is really unprofessional Apple. I never had this issue prior to Yosemite.
    Hope this made since, it's the best I can make of it.
    Thanks!

    From the Mail menu bar, select
              Mail ▹ Preferences...
    The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
              Send new messages from:
    choose
              Account of selected mailbox
    Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
    If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
    In the Account Information pane, select the correct server in the menu labeled
              Outgoing Mail Server (SMTP)
    If there's only one server in the menu, select
              Edit SMTP Server List...
    and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
    Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
              Card ▹ Make This My Card
    from the menu bar.

  • How to send from alternate email address?

    Along with my regular email address, I have a business email address that is forwarded to my regular account.
    In Eudora, I used to be able to set up a new "Personality" that would allow me to send email using the business address, and have that show up in the "reply-to" field as well.
    How can I do this in Mail ?

    go to mail>preferences>accounts, select your email account, then in the email address field just below the description field, enter all the email addresses you would like to use as an alias, separated by a comma, then save. You will then be able to send from this email account with all the email addresses you keyed in.
    Alternatively, you could set up a home email account and a business email account in Leopard Mail, and then have the ability to send/receive/view from one account to another
    hope this helps

  • Mail delivery error when trying to send document to hpeprint. I know the email address is correct

    I just got the HP8600.  I set up eprint according to the instructions.  When I email a document to the printer, I get a Mail Delivery error:
    This message was created automatically by the mail system (ecelerity).
    A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
    >>> [email protected] (reading confirmation): 550 5.7.1 Command
    >>> rejected
    I know the email address is correct.  I don't know what to do to get this to work.

    The Q.com provider seems to have issues sending to our servers for some reason. Other email providers will work fine like you've found with your gmail account. The best workaround at this time is to send from your gmail account if possible.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    It should be an attachment.  Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message.  A PC, for example, will see it as an attached file rather than a preview.
    You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • How can I stop getting 30 - 50 "Mail Administrator" or "Mail Delivery Errors" from occorring in my e-mail on a daily basis

    Every time I log in to my e-mail I see 30 to 50 "mail delivery" errors. This is very frustrating to each time having to delete those items. I have blocked and clicked on spam, but there is no change.

    For goodness sake, it is most likely [http://en.wikipedia.org/wiki/Backscatter_%28email%29 backscatter], changing your mail password probably will not help but is a prudent thing to do, but it is actually quite unlikely that anyone is trying to use your mail account.
    There is basically nothing that can be done about backscatter, as the article I linked to advises.

  • How do i always send from one email address, even when replying?

    Hello all
    I just moved to MAIL after 12 years of Eudora.
    I’m MAIL 2.1.3 in Mac OS 10.4.11 PPC.
    my problem
    People send emails to me at 2 different email addresses. Both of them are stored on two different servers, and thus two different POP setups. Let us call them Eunice.net and Poppy.net
    I have MAIL setup to pull my emails off both different servers. I think it would be best to always send emails from one particular email address, ([email protected]) using the one particular email POP server. (Eunice.net)
    My problem is that when I get an email sent to me at Poppy.net, want to hit reply and have it go out by way of the Eunice.net SMPT (POP) server (and with the return address as [email protected]
    The problem is that I can’t find a way to configure my Preferences/Accounts to make this happen. As of now, I hit reply to an email sent to [email protected]… and it tries to send the email out via Poppy.net (and fails) - i get an error messsage.
    Thanks for any help!

    Mail, Preferences, Composing, Send New Mail from is indeed set properly - so this is why i'm baffled.
    Note that this setting is "Send New Mail from", in other words, when you create a New message, not Reply to an existing message. When you create a new message, does it do send from the specified account? Note that this will only work if no message is selected, else it will create the new message using the account of the selected email (assuming Mail can figure out the account from the header).
    The following is copied from the Mail help (note how it handles New messages and Replies differently):
    *+How is the "From" address determined in a new message or a reply?+*
    +Mail will try to determine the correct "From" address to use when you compose a new message or reply to a message.+
    *+When you compose a new message, the From address is selected in the following order:+*
    +If a message is currently selected, Mail uses the account the message belongs to, if it can be determined from the headers of the message, or by the IMAP mailbox the message resides in.+
    +If an IMAP mailbox is currently selected, Mail uses the account the IMAP mailbox belongs to.+
    +If no message or mailbox is selected, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
    *+When you reply to a message, the From address is selected in the following order:+*
    +The To and Cc fields are compared to email addresses you have set up in Mail Preferences. Mail uses the first matching address it finds as the reply address.+
    +If the message is in an IMAP mailbox, Mail uses the email address for the account the mailbox belongs to.+
    +If all else fails, Mail uses the email address for the first account listed in the Accounts pane of Mail Preferences.+
    One way to ensure that the messages are sent using the Eunice.net SMPT (POP) server is to set that server as the SMTP server in your Poppy mail account (putting your Eunice settings in the SMTP server settings dialog). That won't address the ReplyTo issue (although you can set that manually in the ReplyTo field, accessed via the button next to the subject line).
    Hope this helps...

  • Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.

    I have checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and all is good.  But, I still get the Mail Delivery error when e-printing.  And my friend has the same problem with her new 5510 b111a.  What could possibly be the problem?  Regular printing, scanning and so on work fine with my wireless connection.
    This question was solved.
    View Solution.

    So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
    What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
    I am an HP employee.
    __ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Maybe you are looking for

  • RE: Short dump after activation of BADI

    Hi all, We are getting short dumps in all the transactions after activating the BADI  'BADI_LAYER' We are not able to execute any of the transactions. The details of runtimeerror Runtime Errors         RAISE_EXCEPTION Date and Time          30.07.200

  • Windows Vista Ultimate doesn't install on Satellite M40

    Windows Vista Ultimate doesn't install on this notebook. Vista hangs after installation and doesn't boot up. Does anybody know what the problem is?

  • Clafirication on Login Detials  when using JNDI in Toplink

    Hi, I am using Toplink in my application for connecting to Database using JNDI ,which is specified in session.xml ,given below <toplink-configuration> <session> <name>default</name> <project-xml>META-INF/toplinkMapping.xml</project-xml> <session-type

  • Posting through AC_DOCUMENT_DIRECT_INPUT

    Dear consultants, I need to post debit/credit posting  through tcode FB01 . for this suggested F.M is AC_DOCUMENT_DIRECT_INPUT. Now I got data into database tables and need to post data through the above function module . could u pls guide me how can

  • Problem in configuring Dataguard -Reg

    Hi, We are trying to configure Dataguard using Enterprice Manager Grid Control, While creating primary standby database we struck up with the following error, Name Targets Status Started Ended Elapsed Time(Sec) Step: sourceCloningPreparation PRIMARY