Mail merge doesn't work according to the instructions

I have Microsoft office 2007 and I am trying to do a mail merge. I am following the Mail merge wizard and all the steps are working fine until I get toward the end (step 4 of 6). Under replicate labels, it says 'you can copy the layout of the first label
to the other labels on the page by clicking the button below'. I click on the button which says 'update all labels' and out of the 30 potential labels on the page, only the first 3 and the last 2 get formatted. When I preview the labels, I find that indeed,
only the first 3 labels and last two labels on each page have names and addresses in them.
I have repeated the process, trying to make sure I am following the directions closely, but I get the same result. I have tried to do the steps independently of the mail merge wizard, just by following the steps in one of the forums, but I also get the same
result. 
What am I missing? HELP!

Nobody?

Similar Messages

  • Mail retrieval doesn't work most of the time

    Hi there,
    I am network administrator for a Windows 2003 network with an Exchange 2003 server. In this network I have 3 apple's with os/x 10.5.4. These 3 mac's use the default Mail facility and use POP to get the mail from the Exchange server. Since some weeks 2 of these mac's suddenly won't retrieve mail anymore and give no message whatsoever. Only 1 Mac keeps working fine regarding mail. On an external site I also have an Mac with an older OS and I have enabled POP en IMAP on the firewall. From this Mac I also do not have a problem getting mail. Since they used to use POP I gave up searching and tried starting to use IMAP. Again this fails on 1 'problem' Mac. The external Mac goed fine with IMAP.
    I can ping to the exchange server, i can perform a portscan to 110 and 143 to the exchange server. I can't tracert the exchange server via it's hostname. I thought of network settings and switched it from DHCP to static, checked DNS, but non of them pointed me to a solution. I don't know how to get this working.
    Hopefully somebody can point me into the right direction. I'm a Windows administrators so my knowledge of mac's is minor.
    Marcel
    Message was edited by: support_pl: I forget to mention that with Outlook Express I do not have problems opening the mailboxes.

    Nobody?

  • TS3899 I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • HT6030 Since I did the update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Hey Lukas Schmid,
    The following resource may provide more help in troubleshooting Mail for OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    For more information, you can also visit http://www.apple.com/support/mail/
    Thanks,
    Matt M.

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • Mail app doesn't work

    Mail app doesn't work after Yosemite OSX upgrade. At first it didn't check email and now it doesn't boot. I tried many times, but nothing happens

    Ok after nearly going crazy I read something about someone having a problem with a program related to fonts not being installed. I started up font book and now my problem is miraculously resolved... This is good and bad. I don't know why having font book running would resolve my problem or know what font is causing the programs not to work. As far as I know I didn't disable any system fonts. And the problem doesn't happen when font book is running, which is confusing me.

  • My "sent mail " tone doesn't work. All other tones do work.   I've changed tones and rebooted. Still silent

    "sent mail" tone doesn't work. All other tones do. What to do?
    ILive changed tones and rebooted

    Hi Gwing17,
    Welcome to the Apple Support Communities!
    I understand that all of your iPhone sounds are working as expected except for the Sent Mail sound. I understand that you have already changed the Sent Mail sound as well as reset your iPhone and the issue persists. In this situation, to isolate the issue, I would first recommend backing up your iPhone to either iTunes or iCloud.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    After you have backed up, I would recommend restoring your iPhone and setting it up as new to test the Sent Mail sound. If the sound works as expected, try restoring from your backup and test the sound again. Please let me know if the issue returns or if the sound still does not work when you set up your iPhone as a new device.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Cheers,
    Joe

  • Since I installed IOS7 in my iPad, doesn´t work and in the screen appears the apple logo only. How can I solve this problem? Please, help!!

    Since I updated IOS 7 in my iPad, it doesn´t work and appears the Apple logo in the screen all the time. Any solution?

    1)  Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766
    NOTE:
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • How to I set an internal link in a PDF document using Preview?  After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided.

    How to I set an internal link in a PDF document using Preview?  After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.

    No.  I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.

  • HT2534 Hello, The procedure above doesn't work. Regardless the options I choose, it doesn't allow to proceed without a credit card number. The option not to select a credit card is not there. Can you please help?

    Hello, The procedure above doesn't work. Regardless the options I choose, it doesn't allow to proceed without a credit card number. The option not to select a credit card is not there. Can you please help?

    Read the steps in the support article from which you came carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
    If you are certain you're following the steps exactly as given and are creating a new Apple ID and still have problems, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

  • CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there

    CS 4 Dynamic Link to Encore doesn't work most of the time.  Encore stops operating after opening and periodically Premier Pro stops working.  I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's.  Is there a way around this?  Is there a patch to correct it?

    To build CD's???
    What problem does Encore have with DL?
    If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

  • Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

    Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

    In what way is it not working? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • After update flash player doesn't work most of the time

    Hi Folks!
    Windows XP
    IE 6
    About 2 weeks ago I installed a flash player security update and ever since then flash player doesn't work most of the time. On most websites with embeded video all I see is an empty placeholder where the video is supposed to be.
    If I go to a site like Youtube all is fine. However, if I go to a site that has embeded a Youtube video all I see is the empty placeholder where the video is supposed to be.
    Some folks have recommended I uninstall and download and reinstall. The problem with this is that there isn't *anything* related to Abobe flash player in Add/Remove programs.
    Not sure what to do about this (read: I'm totally lost!).
    Here's a screencap of the empty placeholder:
    http://i27.tinypic.com/2wrdttf.jpg

    The standard warranty is for 12 months from the date of purchase, unless you bough AppleCare which would have extended it to 2 years.
    If it's out of warranty, then you pay for repairs, and it's expensive. There are 3rd party repairers who are cheaper.
    Did you try these?
    The Five Rs.
    As the previous poster said, it's more than likely a hardware issue, but there's no harm in trying the software fixes before you decide it needs repair.

  • TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

    How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

    Try backing it up to your computer with iTunes.  Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.  Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

Maybe you are looking for