Mail merge in crm 2015

hi all 
i wanna create a mail merge template and use this template for print a document with dynamic value.
i made a mail merge template and download it but after edit i can not upload to crm by word 2013 
please help me..

johlinco wrote:
HA!
There were blank columns, I removed them and the whole thing came right together!
Thanks!
Do you know why that happens?
Thanks for the feedback.
I don't know for sure what might trip-up the merge, but I do know that it works better if it's well organized and compact.
Jerry

Similar Messages

  • Cant send Mails via Workflow CRM 2015

    Hi,
    I have two workflows for Cases ... in booth I'm trying to send Mails. In the on it works fine. In the other I'm getting the following Error:
    [Recipient is Contact or Responsible Contact]
    Plugin Trace:
    [Microsoft.Xrm.Sdk.Workflow: Microsoft.Xrm.Sdk.Workflow.Activities.SendEmail]
    [SendEmailStep3: Send Mail To Responsible]
    Error Message:
    Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.Crm.Workflow.Services.SendEmailActivityService.<>c__DisplayClass1.<SendEmailInternal>b__0(IOrganizationService sdkService)
       at Microsoft.Crm.Workflow.Services.ActivityServiceBase.ExecuteInTransactedContext(ActivityDelegate activityDelegate)
       at Microsoft.Crm.Workflow.Services.SendEmailActivityService.ExecuteInternal(ActivityContext executionContext, SendEmail sendEmail)
       at Microsoft.Crm.Workflow.Services.SendEmailActivityService.Execute(ActivityContext executionContext, SendEmail sendEmail)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Any ideas what I can do?
    Thanks for your help
    EDIT: the first workflow is from the 2013 Version .. the second not working prozess is buildet in 2015

    Hello Mcgum,
    Though I am not a techie :(, I guess this is due to some privilege issue. Check if the current user is enabled to send emails on behalf of other user.
    I hope it should work.
    Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

  • Getting wrong letters when tracking german email into CRM 2015 online

    I have a german user that when he is tracking an e-mail into our CRM 2015 Online the special german letters gets changes.
    "für" changes into "für" 
    Any suggestions why this is and what can be done?

    Hi All.
    Today's update.
    According to the Order Tracker-
    Apparently, as of Friday the 10th of August, my BT Infinity 2 service installation was completed. Funny, I don't remember an OpenReach engineer breaking in and installing an Infinity wall-plate, and setting up my non-delivered and thus non-existent HH3!
    Also, about an hour ago from this post time, around 1600hrs on Wednesday the 15th of August, my "New" Evening and Weekend Calling Package went "Live". I believe I have had that package all along. One of my gripes was that I was taken off the Anytime Package.
    Hang on! What's this that came in the post earlier today? Dated the 10th of August - I am being informed that my "Unlimited Anytime Plan" is being set up. Cool! Ah, no completion date, but I was told over the phone, on the 10th, that it will have gone live by midnight of the 10th.
    So, have I got it, or not? Any of it?
    So. Still no second Infinity line.
    Yes I know, some of you poor buggers cannot even get Infinity, but thanks to my Lodger and the general incompetence of one BT department or another, neither can I!
    I am posting this over my trusty 1Mbps ADS2+ line, while trying to download a 3.2GB disc image from MS TechNET. Apparently, it is going to take me nearly 10 hours at the current speed. I have at least five more large images to download.
    Oh boy...

  • How do I add a dynamic hyperlink to an image in a CRM mail Merge?

    We have a mail merge template that is being used by a number of our sales reps.  The sales reps each have a unique URL they use to send out to potential customers.  Their unique URL is saved on their User record in MSCRM.  We want to
    send out marketing pieces to prospects but we need the ability to dynamically add the user's hyperlink to an image on the mail merge (ex: an image saying "Click here") and cannot find a way to do this.  Is this possible?

    Hi,
        This is not possible using OOTB CRM Marketing mail merge features for CRM 2013. However you can use 3rd party tools like Click Dimension for this Alternatively with MDM you are now able to use more advanced design features including what
    you are trying to achieve.
    http://www.microsoft.com/en-us/dynamics/marketing-customer-center/create-or-view-templates-for-email-marketing-messages.aspx
    http://www.microsoft.com/en-us/dynamics/marketing-customer-center/design-message-content-using-the-graphical-editor.aspx
    Hope this helps.
    Minal Dahiya
    blog : http://minaldahiya.blogspot.com.au/
    If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

  • E-mail router (On-premise) to CRM 2015 (On-line) connectivity issue

    Hello Experts,
    I was trying to configure e-mail router on my location environment (working on domain administrator credentials :)) to connect to CRM 2015 Online server (TRIAL version).
    Unfortunately during "Load data" process ("Users, Queues and Forward Mailboxes" tab in E-mail Router Configuration Manager) I'm still getting "Access is denied" error.
    "CRM Server address" I'm using is: “https://disco.crm.dynamics.com/orgname” ("orgname" is 100% correct, I've also tried "DEV" instead of "DISCO" address option) and "Access credentials"
    specified are also correct (this is System Administrator user in my CRM organization).
    I assume that the problem is somehow connected with user account, because when I’m trying to use some fake one (ex. "[email protected]") the error message is different ("GetAuthStateEx(), Request Status: ").
    I was trying to use Fiddler to see problem source and I found that "Access denied" is return during accessing "https://disco.crm.dynamics.com/XrmServices/2011/Discovery.svc" URL.
    Am I missing something? Should CRM account used by e-mail router have some additional permissions except "System administrator" role in CRM?
    Any help will be really appreciated.
    Kind regards,
    Piotr

    I've checked unique organization name on developer resources page many times (this is very common reason of many problems with e-mail router deployments).
    Actually I'm looking at this name right now and it is 100% correct (only lowercase letters, no "strange" characters :)).
    Today - the error message looks a little different.
    I've checked above mentioned web service address ( https://disco.crm.dynamics.com/XrmServices/2011/Discovery.svc ) in IE and there is no problem with accessing it.
    I'm wondering should this error be somehow connected with fact that our CRM online organization is TRIAL version or that it is 7.0.1 version (our e-mail router is 7.0.0)?
    Any other ideas?
    Best regards,
    PG

  • CRM 2015 Online, E-mail router performs so slow

    Hi,
    We are testing staging CRM 2015 Online.  Email router for 2015 is installed in an online Windows 2012 server.  We set Polling Period(seconds) 60 in Email Router Configuration Manager.  However, when I send an e-mail, it takes
    more than 20 minutes for the e-mail to arrive in my Gmail Inbox.  Checking System Jobs and views regarding sent e-mail, all indicates that the e-mail was sent instantly.  What shall I do to improve the Email Router performance?  Thanks.

    Why are you using the email router if your Exchange Server is also Online?  Dynamics CRM Online has Server Sync built in so it will directly communicate to Exchange Online.  Much better solution than rolling up an email Router. 
    Also, if you don't have access to the Exchange server, I' doubt there's much you can do, since you don't have all the tools you need to troubleshoot the issue.
    The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

  • Crm web launcher and mail merge

    Hi
    we have created a screen  on which there are pushbuttons .These pushbuttons are meant for creating letter templates and generate letters using templates alredy created.This program uses mail merge functionality in which OLE is used and data is merged with MS WORD.Everything works fine when we use the same server on which this program is written.but when we use CRM web launcher it takes us to that screen but when we try to use pushbutton for generating letters it always gives  an error which says 'control error'. can any one explain remedy to this problem.
    Note: OLE is abbreviation of Object Linking and Embedding
    Edited by: Arya on Oct 21, 2008 3:11 PM

    Hi
    we have created a screen  on which there are pushbuttons .These pushbuttons are meant for creating letter templates and generate letters using templates alredy created.This program uses mail merge functionality in which OLE is used and data is merged with MS WORD.Everything works fine when we use the same server on which this program is written.but when we use CRM web launcher it takes us to that screen but when we try to use pushbutton for generating letters it always gives  an error which says 'control error'. can any one explain remedy to this problem.
    Note: OLE is abbreviation of Object Linking and Embedding
    Edited by: Arya on Oct 21, 2008 3:11 PM

  • CRM Mail merge on Word on Mac

    Hi All,
    Does any one know if CRM 2013 Mail merge works on Word on an Apple Mac. We have had a few problems with it.
    Thanks
    Mandeep

    This is the Apple Keynote discussion, you should post in the Microsoft forums where the experts there can help you, there is a dedicated mailmarge discussion here:    Microsoft Office Word Mailmerge

  • Configure SMTP server profile on CRM 2015 online

    Hi,
    I am trying to get the CRM mail router to work with CRM 2015 online.
    I use smtp.org.com as the address, but I get this error: '
    Unsupported Email server. The specified email server location isn't supported by server side synchronization. Specify a valid server location to connect to the supported email server and try again.
    I read online that MS CRM 2015 supports POP3/SMTP mail servers, so why this error?

    Hello,
    Try looking for the specific error in the CRM Trace folder.
    To enable tracing, please read
    this post.
    Cornel Croitoriu - Senior Software Developer
    If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

  • Repeating Word Mail-Merge

    I have an entity called Tenant.
    In the Tenant entity there is a form with fields such as Tenant Name, Tenant Address.
    I record the Name and Address of the Tenants in the appropriate fields.
    I want to do a mail merge based on the Tenant entity that when it is ran a separate document containing the Tenant Name and Tenant Address is produced for each separate record in the Tenant entity.
    Anyone know how I could do this?

    check these:-
    http://www.microsoft.com/en-us/dynamics/crm-customer-center/work-with-mail-merge-templates.aspx
    http://www.magnetismsolutions.com/blog/colinmaitland/2013/12/16/microsoft-dynamics-crm-2013-mail-merge
    Regards Faisal

  • Mail Merge for Word

    Hi!
    I want to sent a massive mailing to a siebel onDemand list of contacts.
    I read one help document that tell about "Mail Merge for Word" that have one option "Connect to siebel" but... Where can i download it?
    I have in word the toolbar of mailmerge but not have the option of connect to siebel.
    Any idea?
    Thanks in advance

    Thanks!
    It's work fine but we have 2 problems:
    1. - I can connect, select list of contacts, etc... all ok but when i press to send email no errors but any mail sended. The automation of create task work fine.
    2. - I have 3 different CRMonDemand and only connect with one of them. With other installations of CRMonDemmand tell me that the user or password is not correct. I don't know if I have to set any special configuration in the CRM to let do it.
    Ivan.

  • Mail merge from Business Partner

    I am currently considering upgrading a combination of SAGE Line 50 Accounts, bespoke MS Access SOP and Act! Professional for Workgroups CRM into SBO. There are many benefits of implementing the system but we are getting stuck on the equivalent Act! mail merge of letters to Busines Partners.
    The current proposal we have received indicates that we can create an attachment against a Business Partner based on a word template, open it and then run an ODBC MS Word mail merge to populate the template. The thing is we need a unique identifier of the Business Partner (which is fair enough) but the whole thing is rife with the extra steps and telling word which field in the table / query to refer to when retrieving the data from the SQL database.
    To clarify in Act! currently you are looking at a Business Partner, press F2, select the document template and the whole thing is merged. When you go to print it attaches the document to the Business Partner history as a record and off you go.
    In the SBO world you have to go about a similar number of steps to create the document but it's complicated to get hold of the correct Business Partner and you have all the potential of user error forgetting the name of the field, or mistyping it plus a few additional key strokes and clicks. This may seem trivial but in the world of a telesales team they will all moan that this wonderful new business system is making their life more difficult than the old one.
    Is it not possible ot identify an event within SBO when you select into a business partner such that a table in the background can be populated with your user id and the screen business partner you are looking at? That way you can use word vba to run an SQL ODBC query joining the BP table on this table where the user ID = yourself and low and behold the letter populates first time - it's seemless.
    Alternatively can't SBO make available a global variable which can be picked up by word telling you the unique identifier of the Business Partner this giving the Where clause of the SQL statement populating for the customer?
    Any alternative suggestions which don't include procuring the "B1 Usability Package" add-on which does exactly what we require would be appreciated?
    How much time would it take and to program this through the SDK for a consultant? How complicated is it?
    Thanks in advance

    Hi Rick
    To explain in brief, the main master table (OCRD) is replicated in fields in the audit trail table (ACRD). A few additional fields are available in the ACRD such as Instance which is a numeric incremental number for each update to a master. Instance 1 is of course the Add action when it is created. Therefore you can pull the information of the BP straight from the ACRD table without having to join and using the MAX number of Instance to get the latest "snapshot" of the master. Then there are fields such as update date and time which can be used to determine if any records have been updated in say the last 5 minutes for example.
    Another suggestion would be to add an activity to the BP rather for each letter that must be created, as this will give you history of each letter that was sent. What can work quite nicely will be to change the layout of the activity to be some letter format and then possibly save this to PDF or print to a Document generator printer as a TIFF file and then attach these back to the activity. From the activity you could also fax, email or print the letter.
    The above scenarios are just a suggestion, and I guess a way of trying to impress on you that SAP Business One is still a good choice, despite a few shortcomings. The important thing to remember with SAP Business One is it's flexibility in terms of User Defined Fields, Formatted Searches, SDK, UDO's, DI API, etc. which can in many cases overcome functional gaps. The best advise is to consider how big the gap is and what it will cost to fill it in terms of project time line and cost.
    Hope this helps
    Kind regards
    Peter Juby

  • "Word was unable to open the data source" error message in mail merge

    I am trying to do a mail merge in Word 2008 for Mac and receive this message when I try to open the Excel file for the data.  Can someone please help?  I tried changing the filename to .xls (originally .xlsx) but it didn't work.

    As far as I know, you cannot merge from a  .xlsx data source in Mac Word 2008, and even though there is a KnowledgeBase article at  http://support.microsoft.com/kb/2604725 that suggests
    that all you have to do is "rename" to a .xls, I think what you actually have to do is open the .xlsx in Excel and use Save As to create a .xls.
    Generally speaking, you will be better off researching Mac Word questions in the relevant forum on Microsoft Answers, in this case here: http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword
    This particular issue was discussed in this conversation: http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/cant-open-excel-file-for-mail-merge/90ccfd11-273f-4c2a-aa37-1d859b8e41e2?page=1
    If that does not help, and you cannot find anything else in the Answers group, I suggest that you post a new question in that group, referencing the above conversation and specifying your version of Mac OSX.
    Peter Jamieson

  • How do I get more target fields to apper in inspector for a mail merge?

    I am trying to do a mail merge from a Numbers spreadsheet to a Pages document. The spreadsheet has three columns: first name, last name, units. When I choose and add the merge fields to inspector the target fields 'first name' and 'units' appear but no target field entitled 'last name' appears. I can't figure it out.

    Which version of Pages?
    Peter

  • Dynamics CRM 2015 Install requires Active Directory on VM Windows 2012 R2 Server

    Hello,
    I'm trying to install Dynamics CRM 2015 on a standalone VM not connected to a domain (it's running under WIndows 8.1 Professional). The VM was configured using WIndows Server 2012 R2. I'm getting an error message shortly into the install process stating
    it needs to access Active Directory.
    How can I get around this issue - I just want to Install this CRM on the VM without getting into complicate network/AD issues.
    Can you please advise ?
    SO many thanks,
    John

    CRM requires AD no way around that so the most likely solution is to install it on that server or on a VM not connected to your other networks
    Jason Lattimer
    My Blog -  Follow me on Twitter -  LinkedIn

Maybe you are looking for