Mail messages open in small window

I am using Mail 6.6 on OSX 10.8.5.
When I open an email in a seperate window, I only get the header section of the email, and it always seems to open in the lower left of the desktop.  I am able to move the message around the screen, and I am able to re-size the message window.
When I do this, subsegquent messages open fully.Then when I print a message, the next message I open is shrunk and appears in the lower left hand corner of the desktop.
Is there a solution?
Thanks!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not  going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Similar Messages

  • Mail messages open in new window

    Recently when a notification comes in for Mail, if I click on the banner notification or the notication in Notification Centre, the new mail message opens in a new window instead of just going to the mail app and showing me the message there.
    As far as I am aware I have not changed any settings. Could anyone help me change this back please?
    Many thanks.

    Don't forget to turn off banner notification for Mail in System Preferences!
    http://www.noproblemmac.com/blog/2014/02/27/herald-smart-mail-notification-softw are-on-the-mac/
    Dajanis wrote:
    I've tried Herald (http://erikhinterbichler.com/apps/herald/) but it doesn't work at all for me even if the latest version is supposed to work with Mac OS X 10.9.2

  • Mail messages open in small, truncated window . . .

    I'm running OSX 10.8 on a MacBook Pro Retina. When I click on a Mail message on the list, it opens in a small truncated window at the bottom of my screen. I have to move and resize virtually every piece of email to read it. Is there a fix? Thank you!

    I am having a similar issue on my MacBook Air.  On occassion, a mail message will open at about 1/3 of normal size in the bottom left corner of the screen.  It is not consistent, and there doesn't appear to be any pattern to the type of email that causes this.  It happens with both of my email accounts.
    The only 2 solutions I've found:
    1) Resize the window which will sometimes correct the problem, but it generally reoccurs shortly thereafter.
    2) Close and reopen Mail.
    Any permanent solutions?

  • How to open multiple mail messages in their own windows

    All:
    Anyone know of a keyboard command to open several Mail messages in their own windows? For example, I can't highlight all messages in the Inbox and then double click one of them to open them all in separate windows.
    Surprisingly, Mail lacks an Open... command.
    TIA,
    Mike
      Mac OS X (10.4.4)  

    Just select multiple messages and hit Return.

  • Click on a link and open a small window

    I need to open a small window when user click on link.
    child window got a form, user need to fill in. Then click
    submit.
    Child window entry need to enter to db, and close the client
    window.
    What is the best way to do this?.
    Please post a sample code.

    This code will generate a popup window when the user clicks
    on a link... Just put your new form in the code for the linked
    page.

  • Pass control to a new window opens a small window.

    I am using the following:
    WETargetPath ("rpt", "Name", "My Report", "weWindow=New")
    How do I open the new window so that it is in Full Screen mode (maximized).  Right now, it opens a small window.  On Maximizing the window, the report window still remains small?
    Thanks

    hi shabirdewji,
    i have attached syntax for a new weWindowUtilities function which will address the resizing issue when a New window (not a named window but a new un-named window) is opened. this means that when a New window is opened using the webelements target functions, you can then resize the new window and have no resizing issues.
    please note that you need to use the weTargetPathExt function instead of weTargetPath if you want to specify the initial new window size. please see the weSubmitMethods report in the webelements 246 download for an example.
    the syntax below will open a new window with a size of 500px X 500px. please see the user guide for more info on the wetargetpathext function.
    stringvar item1:= WETargetPathExt ("rpt", "Name", "myreport", "", 500, 500, true, 400, 200, true, true, true, true, true, "");
    WESubmit("cw1", "link", "Open Report in New Custom Window", item1, global stringvar fontlink);
    please replace your webelements246 > admin > wewindowutilities function with the attached syntax.
    thanks,
    jamie

  • Apple Mail new messages opening behind active window

    I have been noticing that new mail messages often open behind active windows, especially Microsoft office (Word).  When I create a new message, the new message will often open and sit behind the current open document.  I have noticed this mostly when using a second display.  It also does not seem to be isolated to just Mail, but that's where I see it the most.  Has anyone else seen this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Opening new Mail message in the main window

    Hello,
    When I get a new mail message notification banner in the right top corner of the screen and click on it, this message is opened in a popup window. I want it to be opened in the main window, like it does when you click on a message if you are already in the Mail app.
    Is this possible? I can't find any option to change this in System Preferences or Mail settings.
    Thanks!

    If the Mail app is frozen then have you tried closing the app via the iPad's multitasking bar and seeing if it works properly when you re-open Mail ?
    iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the Mail app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How can I compose mail messages in a new window?

    Hi,
    When I click on compose new mail, the editor comes up to write the message as expected.
    But it is not a page that I can minimise or move around. I cannot flick between the message I am composing and other emails.
    I cannot see a setting for this, am I missing it?
    Its as if Mail will not allow me to do anything else whilst composing.
    I could get around it by having another Mail screen open but that seems a bit daft.
    Any ideas?
    Steve

    Are you using the menu  Mail > File > New Message?
    You can minimize those message windows.
    i
    After reading Barney's answer, I see your point.

  • Open in smaller window

    I have created a few slideshows in Flash and when the link to
    open them is clicked I need the slideshows to appear in a smaller
    window, like a popup message.
    Can someone please help and tell me how to do this?
    Many thanks

    fourthleaf <[email protected]> wrote:
    > I know how to link to an MP3 and have it open in a
    separate window,
    > but how do I make it open in smaller pop-up window
    instead of the
    > full size that comes up with the Quicktime logo?? I
    tried using an
    > onClick Behavior to open in another window but it won't
    work (tho
    > that might be a Firefox issue, not sure).
    Could you paste some code?
    Javascript Popups definitely work with FF...
    Kind regards,
    magoo

  • MP3s open in smaller window

    I know how to link to an MP3 and have it open in a separate
    window, but how do I make it open in smaller pop-up window instead
    of the full size that comes up with the Quicktime logo?? I tried
    using an onClick Behavior to open in another window but it won't
    work (tho that might be a Firefox issue, not sure).
    Thanks.

    fourthleaf <[email protected]> wrote:
    > I know how to link to an MP3 and have it open in a
    separate window,
    > but how do I make it open in smaller pop-up window
    instead of the
    > full size that comes up with the Quicktime logo?? I
    tried using an
    > onClick Behavior to open in another window but it won't
    work (tho
    > that might be a Firefox issue, not sure).
    Could you paste some code?
    Javascript Popups definitely work with FF...
    Kind regards,
    magoo

  • Mail.app opens behind frontmost window.

    Whenever I launch Mail.app, it opens up behind the frontmost application window, whatever that application happens to be. For example, if I launch Mail by clicking the app in the Finder, Mail opens behind the frontmost Finder window. I'm not sure if this is the expected behavior (I would be surprised if it was), but I would like Mail to open up in front of all other windows, like any other application would. I'm aware that I could write an Applescript, but I'm more interested in finding out what the root cause is.
    Thanks

    Glad it helped. I went that way but somehow I just like Mailappetizer, so am now putting up with the background issue. I think I saw on their website that they are attempting to fix it.

  • Java application window opening in small window

    I have an application that is started from a .jnlp file. When I open the jnlp file, the app is installed and a shortcut to the app is placed on the desktop, and the app opens. The problem is that when the app starts, it flashes the window up taking the whole screen, then it resizes down to a small window (only big enough to see the menu items in the app) in the lower left side of the screen.
    I have opened this same app on other systems and it does not exhibit this behavior. I have also seen this behavior on this system with both JAVA 6 and 7.
    Here is a screen cap of the app as it opens:
    I then have to resize the app by dragging the corner.
    This is more of an annoyance than a real problem, but was wondering if anyone out there new of a way to correct this.

    AWT creates this warning banner for every top level window created without the AWTPermission "ShowWindowWithoutWarning".
    By default the jnlp sandbox will not include this permission.
    If you sign you jars, and you jnlp file contains:
    <security> <all-permission> </security>
    you will have this permission (along with all others) and top level windows will not get the banner.
    /Dietz

  • How to make a hyperlink to open new small window?

    HI!
    I try to make Dreamweawer to do next action when i click on
    some hyperlink on my page:
    - open new small sized window that does not have any
    navigation buttons from browser (back, forward, stop,...)
    - in that window there should be only picture and some text
    Probably stupid question ...but i would be happy if someone
    can help me.
    Thanks all
    Xedor!

    Go to Dreamweaver Exchange and search for "Smart Link." The
    extension is free, and it will meet your needs mentioned above.
    Good luck!

  • New message opens behind email window

    We are using Windows 7 and Outlook 2010. When opening a new message or replying, the new window opens behind the email and is unseen. Is there a way to make the new window open on top (always)?

    Hi,
    To resolve this issue, modify the value of the ForegroundLockTimeout registry entry in Registry Editor. To do this, follow these steps:
    ===============
    Important This section, method, or task contains steps that tell you how to modify the registry. However,
    serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
    1.
    Click Start
    , click Run , type regedit in the Open
    box, and then click OK .
    2.
    In Registry Editor, locate and then click the following registry subkey:
    HKEY_CURRENT_USER\Control Panel\Desktop
    3.
    In the right pane, locate and then double-click
    ForegroundLockTimeout .
    4.
    Under Base , click
    Decimal , type 0 in the Value data
    box, and then click OK .
    Note The default decimal value for the ForegroundLockTimeout registry entry is set as
    200000 .
    5.
    Quit Registry Editor.
    6.
    Restart your computer.
    Best Regards,
    Sally Tang

Maybe you are looking for

  • How can I use the button in one panel to control the other panel's appearing and disappearing?

    How can I use the button in one panel to control the other panel's appearing and disappearing? What I want is when I push the button on one button . another panel appears to display something and when I push it again, that the second panel disappears

  • Adding field in infotype 0009

    Hi, I have a requirement where in i have to add a filed in the infotype 0009. For this i have added the field in the structure ps0009 through append structure. But i have to get the filed in the sceen. Please let me know how to do this. I have gone t

  • WRT54GS v7.0 firmware link wrong

    When I go to the WRT54GS downloads page (http://www.linksysbycisco.com/US/en/support/WRT54GS/download), select version 7.0, it displays firmware Ver.7.50.6 available, but the link actually points to the firmware for WRT54GS v.5-6, Ver.1.52.6. The rel

  • Please please plese help me

    can somebody please help me, ive had a blackberry today and loved it. someone i was speaking to told me to download the new messenger and i did but now its gone :-( ive reinstalled a few times with no luck and have tried to reinstall via the net and

  • Template pictures

    I finally published my site using iweb. On 2 of my pages I used the photo template to load in pictures of my paintings. People who have looked at my site tell me that the images in the template load first and then my pictures. I noticed that myself a