Mail not sending anymore with multiple accounts

Hi
I am experiencing some problem with Mail (v4.5 with SnowLeopard). I cannot send e-mails anymore. This has happened on and off in the last 4 months but now it doesn’t seem to be able to send at all.
When sending I get an e-mail that tells me that the SMTP server is not available and asks me to select another server. I have 3 POP e-mail accounts with the same provider. If I run the diagnostic tool all 3 mail accounts are green so does the SMTP server. The SMTP server was running ok without authentication before.
Reading different threads a partial solution seems to add authentication on the SMTP server (using the first e-mail and the password).
The first e-mail account can now send correctly but the two others are sending but I get a e-mail back telling me that the e-mail could not be sent as the sender e-mail does not correspond to the SMTP account one.
I tried to create 3 different SMTP accounts each one with the specific e-mail address as identifier and the corresponding password, but 2 of them stay off line.
Thank you in advance for your help
C

Hi
I am experiencing some problem with Mail (v4.5 with SnowLeopard). I cannot send e-mails anymore. This has happened on and off in the last 4 months but now it doesn’t seem to be able to send at all.
When sending I get an e-mail that tells me that the SMTP server is not available and asks me to select another server. I have 3 POP e-mail accounts with the same provider. If I run the diagnostic tool all 3 mail accounts are green so does the SMTP server. The SMTP server was running ok without authentication before.
Reading different threads a partial solution seems to add authentication on the SMTP server (using the first e-mail and the password).
The first e-mail account can now send correctly but the two others are sending but I get a e-mail back telling me that the e-mail could not be sent as the sender e-mail does not correspond to the SMTP account one.
I tried to create 3 different SMTP accounts each one with the specific e-mail address as identifier and the corresponding password, but 2 of them stay off line.
Thank you in advance for your help
C

Similar Messages

  • Yahoo Mail not sending anymore

    My Yahoo Mail on Mac Mail was working fine until a few days ago. It could not send out email any more. I have tried a few different settings including smtp.mail.yahoo.com (my original setting which worked until recently) and also plus.smtp.yahoo.com. Incoming mail is still working fine. My other mailbox also setup for the same Mac Mail is also working fine incoming and sending both ways.
    Any ideas?
    (By the way, I did not subscribe to Yahoo Plus)

    Am having same problem. Spent 45 minutes with Apple support via telephone yesterday. They said it is a problem with Yahoo after we went through power cycling, resetting (home+sleep/wake), and re-configuring Yahoo email support (which did solve the problem for about 12 hours).
    See below for a snip from the message I sent to Yahoo support. I'll post the response I get from them, if I get one.
    I am using an iPhone and am having problems sending email. I have tried sending messages from my iPhone using my Yahoo mail account configured through the shortcut on the iphone.
    Yesterday I lost about 10 sent messages - I typed them and hit send (while I had EDGE service) and the iPhone indicated they had been sent, but the items did not show up in my sent items folder (on iPhone and on Yahoo Mail online).
    I contacted Apple support and they walked me through power cycling iPhone, resetting iPhone, and finally re-signing up for Yahoo Mail via the iphone (i.e. setting up Yahoo on the iPhone email client again). This resolved the problem until it began to recur today.
    I have sent several emails from my iPhone, all of which have appeared to send without incident but show up in neither iPhone sent mail folder or online Yahoo sent mail folder. I have used my Gmail account via iPhone without incident or interruption during these periods of time, so I know it is a problem between the iPhone and yahoo mail.

  • Mail not sending email with digital signature

    Hello helpers,
    What's the deal with Mail and digital signatures? I could never get the application to work with my Versign class 1 digital signature in Tiger and now in Leopard. Keep getting error 1035. That's what led mr to Thunderbird and I got Leopard hoping to resolve this issue. Keychain seems as if it's a weirdo in its simplicity and where I believe the problem lies. my digital certificate resides on the system but is not in the my certificate category. However, when I select it in system, afterwards it shows up in my certificate category. If I close Keychain and reopen it, my certificate is empty.
    I like Mail. However, it's important to me to use my digital certificate in signing my email. I believe I must have done something wrong in the installation of the certificate and I can't imaging what. Why can't Mail accept digital certificate directly like other email application rather than go through a third party...Keychain. Mail help did not help. Any workable solution would be appreciated. Thanks
    Ralston

    Just discovered that I have an icloud account and a .me account in my accounts inbox. Do I have a problem with migration to icloud?

  • Mail.app reply from with multiple accounts

    I have two email accounts setup in Mail.  When I get an email from say [email protected] I want Mail, when I reply, to set the from address to the same email address as the original email ([email protected]).  It seems as though Mail does not automatically set the from address in a reply to the original incoming mail address.  Is there any way to correct this?  Even Thunderbird does this......so I would think Mail does?!?!?
    Thanks for the help!

    I have two email accounts setup in Mail.  When I get an email from say [email protected] I want Mail, when I reply, to set the from address to the same email address as the original email ([email protected]).  It seems as though Mail does not automatically set the from address in a reply to the original incoming mail address.  Is there any way to correct this?  Even Thunderbird does this......so I would think Mail does?!?!?
    Thanks for the help!

  • Mail not sending using .mac accounts

    For years, I've had multiple .mac accounts. I've only had one listed as my official .mac account while the others I sent up in Mail as IMAP accounts. This has worked wonderfully this entire time.
    BUT NOW, none of my .mac accounts are sending! I've tried changing the port to 587. I've tried deleting the accounts and recreating them. I've tried all that I can think of. Everytime I try to send I get a popup window asking for my password. I type in my password and it is rejected. I know that it is the correct password because I can login to apple's .mac site and send just fine with the same password. I also know that it is not my ISP. I've connected to the Internet from multiple locations (home, work, friends houses, etc.) and still have the same problem (when I could send from all of these places a week ago). What gives? Can anyone help?
    Thanks!

    Are you also accessing an email account and SMTP server provided by your ISP with the Mail.app?
    If so, are you able to send messages with this account?
    If yes, select/use your ISP's SMTP server to send messages with your .Mac accounts which is invisible to all recipients.
    Then call your ISP to ask if any recent changes were made blocking the use of SMTP servers that are outside of their network even if authenticated such as the .Mac SMTP server.

  • I can receive but not send emails with my skynet account - what am I doing wrong ?

    I can receive but not send emails with my skynet account - what am I doing wrong ?
    I have no problems with my Yahoo account but I can not send emails with my skynet account.
    Actually in iPhone :
    Outgoing Mail Server > SMTP "relay.skynet.be"
    Primary server > Not Configured > Off
    Thank you ...

    When you set them up, did you set up both the incoming and outgoing email servers separately, and did you enter the correct SMTP server name, and enter your userid and password even though it says "optional"?
    Something else to try, if you haven't, is delete the accounts, connect the iPhone to iTunes, on the Info tab check the box to sync mail server settings, then sync. This should duplicate the settings from your computer to your iPhone.

  • HT201320 I have a new ipad mini - I am able to receive emails but not send - same with text. I have tried to follow the support advice. I have deleted my aol account and added it again. I have compared every setting with my husband, who has an ipad? Pleas

    I have a new ipad mini - I am able to receive emails but not send - same with text. I have tried to follow the support advice. I have deleted my aol account and added it again. I have compared every setting with my husband, who has an ipad? Please help

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • When i send email with 2 account 3G and wi-fi it take 15 minutes help

    when i send email with 2 account 3G and wi-fi it take 15 minutes help

    Welcome to Apple Support Communities.
    It's probably quite simple, and nothing to do with your Address Book group.
    It is a matter of 'junk mail' or 'spam' filtering on the recipient end, I think.
    1. Apparently not everyone in your Address Book group (12 of 15 apparently?) has your current email address among their 'permitted email addresses', so, your original email message ends up in their 'junk mail' or 'spam filter' or whatever it is called by their email provider. Some businesses and schools also filter incoming messages for subject, language, content, or by sender's address (one company I dealt with prohibited all incoming email from Hotmail, for example), so it could be filtered at that level. In that case, the recipient might have to specifically ask the IT department to add your email address to a 'permitted' list.
    2. When someone else in the group hits 'reply all', THEIR email address IS among the 'permitted email addresses' for everyone else, and they are in effect 'forwarding' your message from their email address, so the filtering affecting your email address does not affect their re-sending of your message.

  • Since moving to iCloud my mail not sending attachments any answers?

    Hi
    Since moving to iCloud my mail not sending attachments any answers?

    After the migration I started having problems with all NON Apple things.
    Now, as of July, 6th this is my situation:
    Lion devices and iOS5 devices (MacBook, MacPro, iPhone 4s and iPad I) - fine
    have a look here for info:
    AUTOMATIC SETUP FOR APPLE MAIL ON LION MACS
    http://www.apple.com/icloud/setup/mac.html
    Snow Leopard - set up after some trouble using these instructions:
    OLDER SERVER FOR APPLE MAIL ON PRE OS 10.7 MACS
    http://support.apple.com/kb/HT5330
    Non Apple clients should work with these instructions but I still cannot get MailForge to work:
    SERVERS FOR GENERIC EMAIL CLIENTS
    http://support.apple.com/kb/HT4864
    MOBILE NON APPLE STUFF
    With my HP (Palm) Pre 3 I am still figuring out why every single day they change the servers:
    this however might help you as the Palm is more similar to the BB than the iPhone:
    PALM PRE 3 SETTINGS: I also have updated the password on iCloud, deleted the old iCloud account on the Pre, created a new one. Please note that it now sends using the older server, I do not know for how long.
    INCOMING
    OUTGOING

  • Out going mail not sending in mavericks

    I've had this problem since upgrading to mavericks, mail not sending and the sntp server showing off line.
    I"VE FIXED IT!!!!
    Guys hope this helps, the ports show default - 25, 465, 585 in edit smtp settings. Check the next box down - use this port and type in 25, I know its in the default list but its sent my mail when using the custom port.
    Hope this helps, I spent all day yesterday on to my server supplier and onto chat with Apple in US but couldnt solve it.
    Best of luck!!

    For the past few weeks, I have been noticing a similar problem: access to 11 email accounts, and three domains, is blocked on occasion. According to my web hosting company, this is happening because some process was attempting to connect via port 585, an insecure IMAP port; and that an automatic firewall rule was invoked to block those attempts. The blocking would last for about one hour after the last attempt was made to connect.
    I'm running Mavericks. If I quit Mail, then restarted one hour later, the problem was resolved. UNTIL Mail attempted to connect to my mail servers, upon which the blocks were triggered again.
    I downloaded Little Snitch. It told me, unsurprisingly at this point, that three email accounts were attempting to use port 585 to connect to their mail server. But I DON'T USE IMAP with those accounts! Why Mail is attempting to connect to a port which I haven't configured it to use is the puzzle.
    The solution for me: tell Little Snitch to deny any access via port 585.

  • I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

    I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account.  Help.

    I HAD two accounts because of this problem.  I completely removed the problem account from the Apple Mail client.  Guess what is happening??  That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening.  This is incredibly frustrating.  When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system.  COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

  • PO with multiple account assignments - non valuated / valuated GR

    Hi Experts,
    If I create a PO for goods with multiple account assignments the GR will not be valuated, but if I do the same for a service PO the GR will be valuated.
    What is the reason for this?
    Thanks in advance,
    Francisco Melo

    Hi,
    There is more of a qualitative response to the issue, rather than quantitative, If you go through SAP Note 204252 for GR of material it says that: "We have not implemented this function since users who post goods receipts would have to determine the distribution to individual account assignment items during partial deliveries. Generally, users cannot or should not determine this.
    An automatic distribution also causes problems and is also not implemented due to technical reasons".
    Means basically here a stores guy is doing GR and he maynot be competent enough to decide on the Account assignment front.
    However in general the service entry sheet is filled by departments who have got the work done, and are aware of the account assignment for that work.
    Hope this is helpful for you.
    Regards
    Chandra Shekhar

  • Valuated GR with Multiple Account Assignment

    Hi SAP Experts!
    I would want to know the logic behind always using a Non-valuated GRs with Multiple Account Assignments.
    I am asking this because we would want to make use of the budget checking during GRs. More specifically, whenever there is a GR, the committed budget will move to the actual budget. In our business practice, more often than not, the invoice is entered much later than the GR. This would mean that the amount of the purchase will remain in the committed state even if the goods have already been received.
    Is there a way to work around this in SAP? Or is this the only way that it does this?
    Hope to hear from you guys soon. Thanks in advance.

    Hi,
    I am sorry but the basic process is that you cannopt have a valuated receipt for a line with multiple account assignments.
    An alternative (albeit a not very good one) is to just use separate lines on the PO instead of multiple account assignment.
    this may not be any help, but I doubt if there are any user-friendly alternatives.
    Steve B

  • Partial invoice with multiple account assignment

    I'm using PO with multiple account assignment with distribution by percentage and proportional distribution for partial invoice.
    When i post invoice verification for this kind of orders the amount and quantity field in PO item are closed for update and no automatic proportional distribution has been performed.
    The only possibility to update amount in case of partial invoice is to update amount of each account assignment manually (using account assignment button).
    Why the amount and quantity fields are closed for update?
    How i can post partial invoice for multiple account assignment order without manual distribution of changed amounts among different account assignments items?
    Thanks in advance.

    Thanks Charlie.
    I am aware of that. But do we have that "partial invoice" field where we can select teh distribution as proportionate or sequence.
    My POs item are having around 30 to 45 account assignments. In that case it is not possible to manual distribute the amount.
    Please advise.
    Thanks,

  • Services with multiple account assignment.

    Hi all,
    How can I find out the POs which are having the multiple account assignment for the service line items from tables ?
    I am looking for services with multiple account assignments
    Regards

    Hi
    Go to SE16 , give table name -EKPO
    Now if you have purchase order nos with you then copy paste the PO numbers here , or select company code or site to restrict your entries. It will control the performance of the data execution.
    Then execute this (remove max no 200 ) . Go to Settings-- Format List -- Choose fields. Deselect all and select fields as per your requirement.If field names are coming in technical names you can change this via settings--User parameter and select -Field Label.
    You can extract this report to excel as well. Same PO number with all account assignment category.
    Please note if you have high volume of data then extract all the POs under service orders first from EKKO table and copy all the service PO numbers availbvale and paste in table EKPO, it will increase performance as well.
    Cheers
    Mukta

Maybe you are looking for

  • 9.2.0.6 RMAN Disaster recovery issue

    Our production database crashed and we are doing DR on a new host. We dont have any catalog database and we dont use controlfile autobackup. We just do a full backup including controlfile and also archive logs CONFIGURE DEFAULT DEVICE TYPE TO DISK; r

  • PASS THE LONG TEXT TO SAPSCRIPT

    Hello Friends, I m using itcsy structure to pass long text of quality certificate to sapscript output but im able to show only 80 characters in the output but my long text is more than 250 characters. so how i can show these many characters value in

  • Black patch on my screen

    Hey guys, i just noticed there's a black patch on my screen. Bottom right has bigger patch and its obvious on the grey loading screen or any bright backgrounds. Is it something i should worry about be it dirt or burnt? Im using Macbook White Unibody

  • Panasonic AG-DVX100b good or bad?

    Hey guys ok so i have tons of problems with my canon gl2... anyone out there DONT GET IT!! if your going with fcp for all i know 1. dropped frame rates alllll the time look at other peoples comments its true! 2. myn has a rewind issue.... its really

  • Installed 10.5 version on vista store will not open

    i have vista . installed10.5 itunes. store won't open. tried many times to reinstall. store just won't open