Mail not sending Event to iCal after upgrade

I did the same as everyone else and upgraded as soon as I saw the message to upgrade mobileme ical. Now when I try to create an event in iCal using a date in an email after clicking on "Add To iCal" the popup just freezes. I've quited and rebooted Mail as well as iCal and no luck.
Anyone else have this issue? Better yet, did anyone else find out how to fix it?
With 4 boys I rely on that convenience big time!
Maria

The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
An additional measure is to clear the existing font caches:
http://www.macworld.com/article/139383/2009/03/fontcacheclear.html
That said, 10.6.2 release notes have this to say about fonts:
http://support.apple.com/kb/HT3874
Fonts fixes provided for:
• an issue with font spacing
• an issue in which some Fonts are missing
• font duplication issues
• an issue with some PostScript Type 1 fonts not working properly
Good luck in any case.

Similar Messages

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is.

Out going mail not sending in mavericks

I've had this problem since upgrading to mavericks, mail not sending and the sntp server showing off line.
I"VE FIXED IT!!!!
Guys hope this helps, the ports show default - 25, 465, 585 in edit smtp settings. Check the next box down - use this port and type in 25, I know its in the default list but its sent my mail when using the custom port.
Hope this helps, I spent all day yesterday on to my server supplier and onto chat with Apple in US but couldnt solve it.
Best of luck!!

For the past few weeks, I have been noticing a similar problem: access to 11 email accounts, and three domains, is blocked on occasion. According to my web hosting company, this is happening because some process was attempting to connect via port 585, an insecure IMAP port; and that an automatic firewall rule was invoked to block those attempts. The blocking would last for about one hour after the last attempt was made to connect.
I'm running Mavericks. If I quit Mail, then restarted one hour later, the problem was resolved. UNTIL Mail attempted to connect to my mail servers, upon which the blocks were triggered again.
I downloaded Little Snitch. It told me, unsurprisingly at this point, that three email accounts were attempting to use port 585 to connect to their mail server. But I DON'T USE IMAP with those accounts! Why Mail is attempting to connect to a port which I haven't configured it to use is the puzzle.
The solution for me: tell Little Snitch to deny any access via port 585.

Recognizing dates in mail and adding events to iCal

How do I make OSX recognize dates in mail and add events to iCal?
This works on my laptop, but not my iMac. They have the same new version of OSX and iCal.
I cant figure out what setting makes this work on one machine and not the other.
Thanks
CM

First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
If the issue persists:
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV, exchange, etc.) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Hope that helps.

IMAP gmail - mail not sending properly

I have my mail app set up with a gmail IMAP account. My outgoing mail is often not able to be sent despite wifi being on. I hit send and an error comes up saying "a copy has been placed in your outbox. The message content could not be sent to the server" or something like that. The problem is intermittent. I've been trying to work out exactly which messages don't work, and i've gotten at least part of the way there. If I am sending a reply to a message and it doesn't send if I get rid of the quote levels and leave just my response it will send. However, very large messages or forwarding attachments generally do not send at all even after repeated attempts.
So it seems it may be to do with the size of the message trying to be sent, or perhaps the server can't handle the quote levels, but then sometimes these ones get through fine so I don't think it can be this.
I have spoken to apple. They advised me to delete the account and start again, which I've done but the problem is still persisting. Anyone got any ideas?
Chris

I though that gmail was having issues, are you using a wifi connection or 3G?
Either one, if your using wifi check the SMTP settings for your Internet Service Provider.
You can usually find it by google. They may have multiple SMTP server settings but try each one.
Replace the gmail SMTP settings with the ones you find.
If your using 3G, idk who else is selling iPad now (Verizon, AT&T, Sprint?) try using theres.
Either way who ever supplying the Internet try swapping them out for SMTP server addresses, ports, or SSL capabilities.
I hope this works for you as it did for me.
P.S.
If you switch between WIFI and 3G specific SMTP servers may have troubles when switching between the two.
Check if gmail has alternate SMTP server settings other then the ones you may already have selected on your device.
Anyways good luck!

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

Since moving to iCloud my mail not sending attachments any answers?

Hi
Since moving to iCloud my mail not sending attachments any answers?

After the migration I started having problems with all NON Apple things.
Now, as of July, 6th this is my situation:
Lion devices and iOS5 devices (MacBook, MacPro, iPhone 4s and iPad I) - fine
have a look here for info:
AUTOMATIC SETUP FOR APPLE MAIL ON LION MACS
http://www.apple.com/icloud/setup/mac.html
Snow Leopard - set up after some trouble using these instructions:
OLDER SERVER FOR APPLE MAIL ON PRE OS 10.7 MACS
http://support.apple.com/kb/HT5330
Non Apple clients should work with these instructions but I still cannot get MailForge to work:
SERVERS FOR GENERIC EMAIL CLIENTS
http://support.apple.com/kb/HT4864
MOBILE NON APPLE STUFF
With my HP (Palm) Pre 3 I am still figuring out why every single day they change the servers:
this however might help you as the Palm is more similar to the BB than the iPhone:
PALM PRE 3 SETTINGS: I also have updated the password on iCloud, deleted the old iCloud account on the Pre, created a new one. Please note that it now sends using the older server, I do not know for how long.
INCOMING
OUTGOING

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

Did it work with previous ii.x version?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Sharepoint 2013 designer workflow mail not sending

Hi
I am doing sharepoint 2013 workflow for mail sending using designer.
I am sending mail when new item created in List.
Here status is completed, but mail not sending the following error comes
"The e-mail message cannot be sent. Make sure the e-mail has a valid recipient".
But i have valid email ID.
If i am sending mail through C# (Visual Webpart), mail sending properly.
Give me solution, Thanks in advance

Can you please check the below threads
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3c76459c-01f5-4d75-be17-ee5b2ce1c1dd/sharepoint-designer-2013-workflow-not-sending-emails?forum=sharepointgeneral
http://social.technet.microsoft.com/Forums/sharepoint/en-US/caee58c6-3128-4241-92e2-62f1d0bff01f/sharepoint-workflow-not-sending-e-mail?forum=sharepointcustomizationlegacy
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answeron that post andVote as Helpful

ITunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

iTunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

Yes, the tracks were purchased in the iTunes store. I'm sure that DRM is the culprit. Seems like an obvious answer now that I think about it.
Thanks for the help.
Mark

Note 1054131 - Invalid DB objects after upgrade

HI,
We performed a migration from SAP 4.6C/Oracle9i.solaris to SAP 4.6C/Oracle10g/HPUX.
Now we need to upgrade SAP4.6C/Oracle10g/HPUX to ECC6.0.
As a prerequisite, I have checked the note
Note 1054131 - Invalid DB objects after upgrade
And I ran the script
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE FROM DBA_OBJECTS
2 WHERE STATUS='INVALID'
3 AND
4 OWNER='SYS';
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
SYS
DBMS_REPCAT_FLA
PACKAGE BODY        INVALID
SYS
DBMS_REPCAT_MAS
PACKAGE BODY        INVALID
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
SYS
DBMS_REPCAT_UTL2
PACKAGE BODY        INVALID
SYS
DBMS_REDEFINITION
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
PACKAGE BODY        INVALID
All the invalid objects are package body, can anyone help me how to proceed with this, can I proceed my upgrade to ECC 6.0 or do I need to delete the package body.
If I want to delete the package body,can you pl give me the commands and also post which whether I need to execute any steps
Pl help
Thanks
Senthil

Hi,
I guess you are talking about the Oracle Upgrade and not ECC Upgrade, as following are the pre-requisites for an ECC upgrade.
Making Database-Specific Preparations for Oracle
1. Check the value of parameter shared_pool_size:
4 Preparation
Making Preparations at the Database Level
Oracle 9.2: Check the value in file $ORACLE_HOME/dbs/init<SID>.ora.
Oracle 10.1 and higher:
select NAME, VALUE from v$parameter where name=shared_pool_size;
select NAME, VALUE from v$parameter where name=shared_pool_reserved_size;
If the value is lower than 150 MB, increase it to at least 150 MB (400 MB is better), and restart the
database.
2. Log on as user <sapsid>adm at the operating system level.
3. Log on to the database as the Oracle user system with sqlplus
4. Check the resource quotas of the database user SAPR3 or SAP<SAPSID>:
Oracle error 1536 can occur during the upgrade if the resource quotas of database user SAPR3
orSAP<SAPSID> are limited. Make sure that these quotas are unlimited. Check whether the table
DBA_SYS_PRIVS contains one of the following entries:
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=YES
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=NO
To do this, enter the following SQLPLUS statement:
select * from dba_sys_privs where grantee = SAPR3/SAP<SAPSID>;
If this entry does not exist, enter the SQLPLUS statement:
grant unlimited tablespace to sapr3/SAP<SAPSID>;
5. Log off from the database with the command quit.
6. Only if using the dictionary managed tablespaces function:
Make sure that the storage parameters MAXEXTENTS and NEXT have the correct values for certain tables and indexes. Otherwise, they may overflow during the upgrade. The Oracle-specific upgrade SAP Note contains the tables and the required minimum values.You can display the current settings with BRSPACE. The index names are not constant. However, you can also determine these names with BRSPACE. SAP Note 11777 describes how to change the parameters NEXT and MAXEXTENTS.
7. Only valid for: SAP R/3 3.1I
Make sure that parameter OPTIMIZER_MODE is set to OPTIMIZER_MODE=RULE.
For Oracle 9.2, check and, if necessary, edit the following Oracle profile:
$ORACLE_HOME/dbs/init<SAPSID>.ora
For Oracle 10.1. and higher, use the following statements:
Sqlplus /nolog
Connect /as sysdba
Alter system set OPTIMIZER_MODE=RULE scope=spfile;
8. Only if you do not switch off archiving during the upgrade:
If you want to leave brarchive running during the upgrade to avoid archiver stuck situations (brarchive -f ...), proceed as follows:
a) Create a temporary copy of brarchive:
4 Preparation
4.23 Making Preparations at the SAP System Level
cp /usr/sap/<SAPSID>/SYS/exe/run/brarchive /tmp
b) Start brarchive as user ora<sapsid> from the temporary directory /tmp/brarchive -f ...
c) After the upgrade, delete the copy of brarchive.
This procedure avoids upgrade errors caused by the program files being overwritten during the upgrade.
9. If your database version is already higher than the minimum version for the new release, we recommend that you exchange the DBA tools (such as BRSPACE) for the upgrade. The Database Software Oracle DVD for the database contains the up-to-date tools that you unpacked on the current kernel when you migrated the database. After you execute PREPARE, unpack this archive again into the exe subdirectory of the upgrade directory. This overwrites the DBA tools optimized for the minimum required database version with the tools best suited to your database version.
And if you are talking about an Oracle Upgrade then you just need these to compare once you have upgraded to 10g.
3.9 Checking for Invalid Database Objects
This optional step lets you check if there are any invalid database objects before the database upgrade to Oracle database 10g starts. After the upgrade it helps you distinguish database objects that have become invalid due to the upgrade process from those that were already invalid to start with.
Procedure
1. Execute the following commands:
SQL> spool invalid_objects
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> @?/rdbms/admin/utlrp.sql
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> spool off
A list of invalid objects before the upgrade is now generated.
2. Check the list of invalid objects after the upgrade.
If any objects in the list from before the upgrade are also in the list of invalid objects after the upgrade, you can be sure that this is not due to the upgrade process.
Regards,
Suhas

Automation error element not found in vb6 2147319765 after upgrading the os

Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer

Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin

ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
That sounds like the probable cause you cannot add contacts.
Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps). Also contacts sync has nothing to do with iCloud behavior. The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere. Specific syncs are not relevant.

Mail not sending Event to iCal after upgrade

Similar Messages

Maybe you are looking for