Mail Rules window says "No Scripts Installed" next to "Run AppleScript"

I'm trying to create a rule in Mail that will run an AppleScript. But when I choose "Run AppleScript" in the action section of the rule-creation window, the dropdown to the right says "No Scripts Installed".
If I click on that dropdown, it has one option: "Open in Finder". When I choose that, a Finder window opens to the folder Library/Application Scripts/com.apple.mail/. I dropped my AppleScript file into that folder, but when I tried again to make a rule, I still got the "No Scripts Installed" dropdown.
I'm running Mail version 6.3 in OS X 10.8.3.
Any idea how to get this working properly? Thanks.

When Finder opens the directory for your AppleScript (in the case of OS 10.9.1, "Library>Application Scripts>com.apple.mail"), make sure your script (not a shortcut to your script) is copied there. Once it is, you will see the script in the dropdown menu where you initially saw "No Scripts Installed".
Hope this helps.

Similar Messages

  • I recently subscribed to acrobat pro. I downloaded it, but can't open it. I keep getting the window saying application quit unexpectedly.  I running Mavericks. Is that a separate download? Where do I get it?

    I recently subscribed to acrobat pro. I downloaded it, but can’t open it. I keep getting the window saying application quit unexpectedly. I running Mavericks. Is that a separate download? Where do I get it? I downloaded on Safari. Should I have used Firefox?

    Hi Kenglade,
    Are you still facing this issue?
    If yes please try follow below mentioned steps and let me know if that helps:
        1. Start you Mac in Safe Mode: http://support.apple.com/kb/HT1564?viewlocale=en_US
        2. Once you are in Safe mode, Disk repair using Disk utility: https://us.battle.net/support/en/article/repair-disk-permissions-and-repair-disk
        3. If the above steps didn’t help, you may try to enable root account and check the issue from there
        How to enable root account: http://support.apple.com/kb/PH14281 
    Regards,
    Ajlan Huda.

  • Hi after upgrading to mountain lion my mail rules keep disappearing this has only happened since i installed mountain lion.

    Hi after upgrading to mountain lion my mail rules keep disappearing???  this has only happened since i installed mountain lion.

    I had Mountain Lion on two Macs. Mail rules were set up on a third Mac running Lion.  I migrated everything on the Lion Mac across to a new iMac running Mountain Lion so now I have Mail rules on a Mountain Lion Mac.  At least I should have. Several times a day the rules disappear.  I assume this is iCloud synching messing up.  I keep re-entring the rules but they vanish again and I'm getting tired of the game.
    Large chunk of my Safari bookmarks bar also disappear at random intervals.  It seems that iCloud can handle two Mountain Lion Macs on the same Apple ID, but can't cope with three.

  • My Mail rules keep "breaking"

    I'm using Mail on OS X 10.4.10, with the Mail Act-On plugin installed. (This lets me trigger specific rules with key shortcuts.) I have 4 IMAP accounts in Mail, one of which is .Mac. The others are on my own server, provided by a hosting service.
    I have set up several rules to automate moving messages from one folder to another. But each time I start Mail, it changes several of the rules, so they don't point to the mailboxes I want. Rather than pointing to the mailboxes under the "Inbox" at the top of the list, some of them point instead to IMAP boxes at the bottom of the list (featuring a grey globe with the @ symbol). The problem seems only affect the accounts that are on my IMAP server, not the .Mac account. Other rules that don't point to mailboxes in the Inbox don't have this problem. Any ideas about what could be causing this?
    Thanks,
    Jack

    I had Mountain Lion on two Macs. Mail rules were set up on a third Mac running Lion.  I migrated everything on the Lion Mac across to a new iMac running Mountain Lion so now I have Mail rules on a Mountain Lion Mac.  At least I should have. Several times a day the rules disappear.  I assume this is iCloud synching messing up.  I keep re-entring the rules but they vanish again and I'm getting tired of the game.
    Large chunk of my Safari bookmarks bar also disappear at random intervals.  It seems that iCloud can handle two Mountain Lion Macs on the same Apple ID, but can't cope with three.

  • How do I start Photoshop CC after CC says it is installed?

    I just joined the Creative Cloud and the CC window says I have installed Lightroom 5 and Photoshop CC.  There is a Lightroom shortcut on my desktop which appears to open the app (I am new to Lightroom).  However, there is no Photoshop CC shortcut.  There IS a Creative Cloud shortcut which only opens the window described in the first sentence.  Help!  I am running Windows 7 Professional, Service Pack 1.

    Strange... Well, there must be an Adobe Photoshop folder with the appropriate application icon in it somewhere in your Programs folder. You know how and where to find that ? You can then rightclick that icon and create a shortcut onto the desktop.
    I wish the application icons in the CC Destop panel would "start" the applications, if present of course. That would be very obvious for them to do, I guess.

  • After trying to install the new update, I am getting a message from Windows saying that an MC file is missing, reintall Itunes-which I have now done 3 times. How do I fix this?

    I received the new update from Itunes and after installing, I couldnt get into my Itunes.  I get a message from Windows saying that an MC file is missing and  to reinstall I tunes.  I have reinstalled 3 times, the first time I didn't remove the old version, I installed the update over it.  Next I tried the repair function under Control Panel.  After that, I uninstalled Itunes and reinstalled again from the website.  I still get the same message about missing files from Windows.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • My existing purchases have INSTALL next to them, but when I try click on them it says "There was an error in the App Store. Please try again later. (100)". I've tried restarting, clearing all caches, buying and downloading new apps (which works). Any idea

    Hi - in the app store, I've logged in with no problem, but when I go into my existing purchases and have INSTALL next to everything I've bought, and try to click on them it says;
    "There was an error in the App Store. Please try again later. (100)".
    I've tried restarting, clearing all caches, buying and downloading new apps (which works), and also buying and downloading more music from iTunes too (so I update all T&C's etc too, and update all payment info). But nothing seems to solve this. Any ideas?? Thanks a lot, Greg

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen L*/Coo* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Program with Mail Rule script

    I am trying to develop a Mail run script and I am running into problems. The Rule is being trigger because I have a change my color rule action and a script action. The color changes but the script does not appear to trigger at all. His is the script.
    using terms from application "Mail"
    on perform mail action with messages theMessages
    tell application "Finder" to set pathToAttachments to (path to desktop folder as string)
    tell application "Mail"
    repeat with theMessage in theMessages
    set theText to content of theMessage
    if theMessage's mail attachments is not {} then
    repeat with theAttachment in theMessage's mail attachments
    set theFileName to pathToAttachments & theAttachment's name
    try
    save theAttachment in theFileName
    on error errnum
    end try
    tell application "Preview" to open file theFileName
    tell application "Finder" to delete file theFileName
    end repeat
    end if
    end repeat
    end tell
    end perform mail action with messages
    end using terms from
    tell application "Mail"
    set myMessages to selection
    tell me to perform mail action with messages myMessages
    end tell
    Notice the tell block at the end. If I uncomment that, select a mail message and execute that in a script editor, all is fine.
    With that block commented out and try to execute it using the *Apply Rules* nothing seems to happens. Even if I put a Beep statement inside the "on perform mail action with messages theMessages" block, That does not even sound off.
    Anyone see why this would execute as a rule?

    Camelot wrote:
    The logic of whether to invoke the rule is not within the script.
    You tell Mail.app to run the script when certain conditions are met (e.g. sender address, recipient address, or one of several other conditions). Once Mail.app has decided the messages matches the conditions it calls your script.
    I realize that is the theory behind mail.app, but it has been my experience with Rule settings that they do NOT run "automagically" when conditions in them are met.
    This is clearly illustrated by a number of cases I have where by simply "adding a rule," any rule, that says anything, and then clicking the resulting "apply" button (which only is available when you add or subtract a rule), all the existing rule(s) are processed and mail is sorted according to those rules which had previously been sitting in the inbox. (In my case they are a bunch of "junk" filters).
    There is either some bug in mail's triggering mechanism, or some inherently "different" mechanism in use when "auto triggered" vs when "applied." In either case, there is no documentation about it.

  • Everytime i start firefox, I get a window that says:A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.

    Each time i open Firefox, i get a window opening saying:A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsBrowserContentHandler.js:619
    When i try again, i get the same result, if I continue, nothing happens for a few minutes then fire fox opens with awindow saying to start again.
    == This happened ==
    Every time Firefox opened
    == I installed Firefox ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.30729; .NET CLR 3.5.30729)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Shutdown and I have a window saying i didn't finish installing

    Hello I need help on this:
    after I shutdown my Mac whit Yosemite I have a windows saying i didn’t finish installing a program or I don’t now what?
    I have the message after:
    Error: Not Found
    The requested URL/install/agent_update?sessions_id=20A9B4DA-3445-41AA-85A8-309A6601968&emid=f c31460bb5821d7489c783ee0ff3f7cl&app_id=20995000 was not found on this server.
    MacPro Retina Mid 2012 2.3GHz i7 8gb Ram
    MacBook Pro with Retina display, OS X Yosemite (10.10.2)

    Thanks for your help Jeff...actually it turned out that Chrome was the issue and even FIrefox didn't work ....it was slow clunky old IE that eventually got me the chat option and I finally got my issue resolved.....I was getting pretty desperate and am now VERY happy to have my Master Collection back.
    Sorry I don't know enough about plugins to help you there but all other functions that I need to do with Chrome work as a rule so I cannot help as far as Adobe is concerned.  I know that Chrome often has shock wave errors due to incompatibility with the player on my device but otherwise I'm clueless.

  • My Ipod touch Is stuck in restoe mode. I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

    I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

    I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

  • When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.

    When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying,  "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me).  I completely uninstalled the previous iTunes prior to this.  Any thoughts?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Am unable to Install Adobe Flash, 2. I have a warning saying Jarva script void, could someone please give me some advice with these problems, I am new to Firefox and I am Trying to set up a new home page. Kind Regards, briansheree

    I have installed Firefox 8 and I am trying to set up a Homepage with downloads,Plugins and extension sidebar plus Bookmarks toolbar, with named folders containing my favorite sites, but when as instructed to upgrade Adobe Flash to the latest version the install fails. And I also had a warning in my search bar saying Java script void.

    I have installed Firefox 8 and I am trying to set up a Homepage with downloads,Plugins and extension sidebar plus Bookmarks toolbar, with named folders containing my favorite sites, but when as instructed to upgrade Adobe Flash to the latest version the install fails. And I also had a warning in my search bar saying Java script void.

  • When trying to download Boot Camp Windows Support Software, error says: "Can't install the software because it is not currently available from the Software Update server."

    I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
    Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
    Please help!
    Thanks

    You need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.

  • Creative cloud says "Download error" following Windows 8.1 re-install

    creative cloud says "Download error. Please contact customer support" following Windows 8.1 re-install.
    When I click the "Apps" tab an  error message says Download error. Please contact customer support.
    Any suggestions?

    Hi raydb,
    Please refer to the solution on the thread  :http://forums.adobe.com/message/5466160,
    Let us know if it worked. You can also contact Adobe Support at http://adobe.ly/yxj0t6
    Regards,
    Rave

Maybe you are looking for

  • How do I create folders on my email account?

    When I open my email account on the Internet it shows all my emails in their respected folders that I created and organized. Unfortunately, when I try to open my account on the desktop email app they provide for us (the postage stamp with the bird) i

  • How do I install Leopard on MacBook Pro Retina Partition

    I am trying to install either Leopard or Snow Leopard on a partition of my MBP Retina. I can set up the partition but how do I load a new OS on that Partition with an external Super Drive. I also have VMWare Fusion and am trying to do it that way or

  • Identifying Multiple Rotes out of a User Service in LC ES

    Hi I'm not sure if this is a WorkSpace or WorkBench issue so please advise if in wrong forum. We have created a number of LC ES processes that require 2 'routes' out of the user service at a number of stages in the process. These routes are typically

  • Problem adding more than 1 table from a database

    I am running Crystal Reports 2008 on windows server 2008 and connecting to an ODBC database using IBM Client access driver.  When I create a new report and only add one table from the database, everything works fine.  If I try to go add a second tabl

  • Error : Oops.. there was a problem

    Hi, While trying to login in into Skype from my Windows 8 Pro desktop machine, it throws an error "Oops there was a problem, Try again." Can you please advise how to resolve this one. S.Ramesh Attachments: Screenshot 2014-11-15 10.37.06.png ‏24 KB