Mail using MXTOOLBOX

I have been using .mac mail for my personal email. My work using MXTOOLBOX for mail. All was fine, until about a 2 months ago, every time mail would try to get my new email, it would freeze my phone for a few minutes. Where once when emails were coming in, I could scroll through the mail messages as they were coming in, and even select one, and read it, still while downloading. Now, it just locks my phone where i can do nothing while mail is being checked/received.
I checked with IT and they said nothing has changed. I went to apple store and we reset the phone 2x. When that did not work, I then deleted my work email, and then mail works just fine. no problems.
Yesterday, I reload again, my work email, after about 3 weeks of my work email being off, and it still freezing.
No idea what to do. No one else at my work is having this problem.
Thanks. Adam

Well, I think I may have somewhat figured it out. I had it set to fetch new mail every 30 min or so, but I noticed my battery was draining, so I switched it to manual. Well when I open my mail after that, it loaded, and slowed the phone to a freeze.
So I am not sure why, but I think I will keep it on fetch for a while and see what happens.

Similar Messages

Can not find some messages in Mail using search

I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Problems to SEND MAIL using WWV_FLOW_MAIL.SEND - APEX_MAIL

I tried send mail using the code below
DECLARE
l_body      CLOB:= EMPTY_CLOB;
l_body_html CLOB:= EMPTY_CLOB;
BEGIN
wwv_flow_api.set_security_group_id;
l_body :='<html>
+<head>+
+<style type="text/css">+
+body{font-family: Arial, Helvetica, sans-serif;+
                               +font-size:10pt;+
                               +margin:30px;+
                               +background-color:#ffffff;}+
+span.sig{font-style:italic;+
font-weight:bold;
color:#811919;}
+</style>+
+</head>+
+<body>+
+</html>';+
l_body_html := '<html>
+<head>+
+<style type="text/css">+
+body{font-family: Arial, Helvetica, sans-serif;+
                               +font-size:10pt;+
                               +margin:30px;+
                               +background-color:#ffffff;}+
+span.sig{font-style:italic;+
font-weight:bold;
color:#811919;}
+</style>+
+</head>+
+<body>+
+</html>';+
wwv_flow_mail.send('[email protected]','[email protected]',nvl(l_body,'Texto com erro'),nvl(l_body_html,'erro2'),'K','[email protected]',
+'[email protected]','[email protected]');+
wwv_flow_mail.push_queue;
END;
+/+
This code return the message:
Mail To From Subject CC BCC Created On Created By Error Created
CHECK$01 [email protected] [email protected] K [email protected] [email protected] 08/23/2010 03:05:00 PM SYS
ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
Follow my mail settings
SMTP Host Address : POP.SLE.TERRA.COM.BR
SMTP Host Port 110
Administration Email Address [email protected]
Notification Email Address [email protected]
what´s wrong ?

I would try sending just basic text first, then move on to getting your other pieces dynamics. The very last step to me would be the email body.
Here is an example of a basic text email I use:
declare
e_id        NUMBER;
c_id        NUMBER;
emp_nm      VARCHAR2(100);
clrk_id     NUMBER;
e_clrk      VARCHAR2(47);
e_org       NUMBER;
e_sender    VARCHAR2(50);
e_recip_lst VARCHAR2(255);
e_cc        VARCHAR2(100);
e_bcc       VARCHAR2(100);
e_subj      VARCHAR2(50);
e_msg_ln1   VARCHAR2(100);
e_msg_ln2   VARCHAR2(100);
e_msg_ln3   VARCHAR2(100);
e_msg_ln4   VARCHAR2(100);
e_msg_ln5   VARCHAR2(100);
e_msg       VARCHAR2(1000);
CRLF        CHAR(2) := CHR(13) || CHR(11);
tmp_flag    NUMBER;
begin
   if :P2_INJURY_FLAG = 1 then
   -- find out if it has changed first so we don't keep sending emails
    select injury_flag, VEH_LOC
      into tmp_flag, e_org
      from APPS.tc
     where tc_id = :P2_TC_ID;
   if :P2_injury_flag <> tmp_flag then
    begin
       select FN_GET_USER(nvl(v('APP_USER'),user))
         into clrk_id
         from dual;
      select ADMIN_USERNAME
         into e_clrk
        from APPS.APEX_ACCESS_CONTROL
       where ID = clrk_id;
    exception
       when others then null; -- in case we cannot find the user
    end;
    e_id          := :P2_EMP_ID;
    c_id          := :P2_TC_ID;
    select EMP_FNAME ||' '|| EMP_MNAME ||' '|| EMP_LNAME into emp_nm
      from APPS.EMPLOYEES
     where EMP_ID = e_id; --
    select RECIPIENTS, CC, BCC
      into e_recip_lst, e_cc, e_bcc
      from APPS.SAFETY_NOTIFICATIONS
     where ORG_ID = e_org; --
      e_sender    := '[email protected]';
      e_subj      := 'Loss Reported';
      e_msg_ln1   := 'Employee: ' || emp_nm || ' (' || e_id || ')'
                      || CRLF;
      e_msg_ln2   := 'Was reported as sustaining a loss' || CRLF;
      e_msg_ln3   := 'by ' || e_clrk ||CRLF;
      e_msg_ln4   := CRLF;
      e_msg_ln5   := 'Sent ' || to_char(sysdate,'MONTH DD,YYYY HH:MI AM');
      e_msg       := e_msg_ln1 || e_msg_ln2 || e_msg_ln3 || e_msg_ln4 || e_msg_ln5 || CRLF || e_recip_lst;
     utl_mail.send(
       sender => e_sender,
       recipients => e_recip_lst,
       cc => e_cc,
       bcc => e_bcc,
       subject => e_subj,
       message => e_msg);
end if;
end if;
end;

Cannot Send Mail using AIM account.

I can receive mail fine but when I try to send mail I get the following message:
Cannot send mail using the server smtp.aim.com:EmilyLozano.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: Emily Lozano <[email protected]>
I left for a trip a few days ago, came back and now for no apparent reason cannot send mail as I always have. I have reconfigured the port to 587 and that did not help. Any suggestions? (I can send and receive fine via the web, but I really hate it.)

I'm glad you got it figured out. So many times people on this forum sit around waiting for help when they could have retraced their steps, like you did, to figure out the source of the problem.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

How to update the sent mail using SO_NEW_DOCUMENT_ATT_SEND_API1

I have a requirement to update/ append the sent mail like a trail.Since i am sending mails using SO_NEW_DOCUMENT_ATT_SEND_API1, how can i update new contents to sent mails using this RFC???Please help me.

you may have to store content of each time mail send then only, you can send with history.

How can send mails using hotmail/rediffmail domain name?

I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Sendmail1 extends HttpServlet {
private String smtpHost;
// Initialize the servlet with the hostname of the SMTP server
// we'll be using the send the messages
public void init(ServletConfig config)
throws ServletException {
super.init(config);
smtpHost = config.getInitParameter("smtpHost");
//smtpHost = "sbm5501";
smtpHost = "www.rediffmail.com";
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException, java.io.IOException {
String from = request.getParameter("from");
String to "[email protected]";
String cc = "[email protected]";
String bcc ="[email protected]";
String smtp ="www.rediffmail.com";
String subject = "hai";
String text = "Hai how r u";
PrintWriter writer = response.getWriter();
if (subject == null)
subject = "Null";
if (text == null)
text = "No message";
String status;
try {
// Create the JavaMail session
java.util.Properties properties = System.getProperties();
if (smtp == null)
smtp = "www.rediffmail.com";
properties.put("mail.smtp.host", smtp);
Session session = Session.getInstance(properties, null);
//to connect
//Transport transport =session.getTransport("smtp");
//transport.connect(smtpHost,user,password);
// Construct the message
MimeMessage message = new MimeMessage(session);
// Set the from address
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
// Parse and set the recipient addresses
Address[] toAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.TO,toAddresses);
Address[] ccAddresses = InternetAddress.parse(cc);
message.setRecipients(Message.RecipientType.CC,ccAddresses);
Address[] bccAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.BCC,bccAddresses);
// Set the subject and text
message.setSubject(subject);
message.setText(text);
Transport.send(message);
//status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
} catch (AddressException e)
status = "There was an error parsing the addresses. " + e;
} catch (SendFailedException e)
status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
} catch (MessagingException e)
status = "There was an unexpected error. " + e;
// Output a status message
response.setContentType("text/html");
writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
writer.close();
Please any one help me out from this probs.
Awaiting for yours reply,
or give me a reply to: [email protected]
Regards,
@maheshkumar.k

Hi,
how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
smtp server.But that is the address of that website.Try will a smtp
server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/

Error while sending mail using script task in ssis 2008

Hi,
i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
code i have used is
declared read only variables system::packagename
Dim PACKAGE As String
PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
Dim myHtmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
mySmtpClient = New SmtpClient("smtp.gmail.com")
mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
mySmtpClient.EnableSsl = True
mySmtpClient.Port = 587
mySmtpClient.Send(myHtmlMessage)
error i am getting is
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
can any one tell me where i am going wrong

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Unable to sending a mail using odisend mail

Hi,
i have a need to send a mail using odi send mail, i am using gmail server getting to send a mail, but it getting error like this
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTTLS command first. d19sm1563829ibh.8
     at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
     at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
     at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
     at javax.mail.Transport.send0(Transport.java:169)
     at javax.mail.Transport.send(Transport.java:99)
     at com.sunopsis.dwg.tools.SendMail.actionExecute(SendMail.java:220)
     at com.sunopsis.dwg.function.SnpsFunctionBase.execute(SnpsFunctionBase.java:276)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3430)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1491)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
     at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
please share your opinions for this post
Regards,
901202

http://www.oracle.com/technetwork/java/javamail/faq/index.html#starttls

Mail.jar is locked when sending a mail using servlet and not releasing

Hi everybody,
The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
the problem is not recorded in any logs.
1. Please create a servlet that sends mail
2. Send a mail to any mailid
3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
when i removed Transport.send(msg); from code it works fine. but ??
please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
please help me to recover from this issue.
Thanks,
Prasad.N

hi friend
I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
what may be the reason?
Thanks,
Prasad.N

Issue while sending mails using classes

Hi Experts ,
i have one issue when i try to send mails using classes cl_document_bcs,cl_cam_address_bcs,cl_bcs etc
ISSUE :
i put some data in selection screen and i get some output ( say i got 5 records), i select 3 records and press some button to trigger mail and mail is send, and now again the OUTPUT screen is shown with sended records but we can not send these records again ............ now i selcect remaining two records and press button to trigger mail and THIS TIME MAIL IS NOT SEND.
amd my code is :
CREATE OBJECT l_document.
CREATE OBJECT l_recipient.
TRY.
      cl_bcs_convert=>string_to_solix(
      EXPORTING
      iv_string = fp_wa_output
      iv_codepage = fp_v_code_page
      iv_add_bom = 'X'
      IMPORTING
      et_solix = l_wa_output_binary
      ev_size = l_v_size ).
      l_send_request = cl_bcs=>create_persistent( ).
*-->Creating Document
      l_document = cl_document_bcs=>create_document(
      i_type = 'RAW'
      i_text = fp_it_content[]
      i_subject = fp_text_48 ) .
*-->Adding Attachment*
      CALL METHOD l_document->add_attachment
        EXPORTING
          i_attachment_type    = fp_text_049
          i_attachment_size    = l_v_size
          i_attachment_subject = fp_v_file
          i_att_content_hex    = l_wa_output_binary.
*-->Add document to send request*
      CALL METHOD l_send_request->set_document( l_document ).
*    do send delivery info for successful mails
      CALL METHOD l_send_request->set_status_attributes
        EXPORTING
          i_requested_status = 'E'
          i_status_mail      = 'A'.
*-->Get Sender Object
      l_uname = sy-uname.
      l_sender = cl_sapuser_bcs=>create( l_uname ).
      CALL METHOD l_send_request->set_sender
        EXPORTING
          i_sender = l_sender.
      LOOP AT fp_s_mail INTO l_wa_mail.
        l_v_objid = l_wa_mail-low.
        l_v_mail = l_v_smtpadr.
        TRANSLATE l_v_mail TO LOWER CASE.
        l_recipient = cl_cam_address_bcs=>create_internet_address( l_v_mail ).
        CALL METHOD l_send_request->add_recipient
          EXPORTING
            i_recipient = l_recipient
            i_express    = 'X' .
*            i_copy       = ' '
*            i_blind_copy = ' '
*            i_no_forward = ' '.
      ENDLOOP.
**-->Trigger E-Mail immediately*
*      IF fp_send_all EQ 'X'.
*        l_send_request->set_send_immediately( 'X' ).
*      ENDIF.
      CALL METHOD l_send_request->send(
      EXPORTING
      i_with_error_screen = 'X'
        RECEIVING result = l_v_sent_to_all ).
      BREAK TARK.
      IF l_v_sent_to_all = 'X'.
        MESSAGE i000 .
      ENDIF.
    COMMIT WORK.
    CATCH cx_document_bcs INTO l_bcs_exception.
    CATCH cx_send_req_bcs INTO l_send_exception.
    CATCH cx_address_bcs INTO l_addr_exception.
    CATCH cx_bcs INTO l_exp.
ENDTRY.
thanks in advance
rahul

Every time when i choose other network or dongle to send those mails it gets sent.
As per the description, seems it's an issue related to this specific network. Probably, they've adjusted their security policy, like blocked some port numbers, etc.
You might need to contact the support of your ISP to confirm what SMTP settings you need. Check port number, and security settings.
By the way, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to
Office for mac, I would suggest you to post in the forum of
Office for Mac, where you can get more experienced responses:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I can no longer receive mail using the mail app? I have to go online instead - why?

Hej some one,
I can no longer receive mail using the mail app? I have to go online instead - why & what can I do?

Check your smtp preferences in mail.app.
See if mail.app's Connection Doctor has any useful info. Does it's status indicate all is ok? When you use it's Show Detail are there any (useful) error messages?

Send mail using Internal Mail server doesn't work

I can't send mail using my companies mail server, which requires authentication and port 587 to send. We have a valid, non self-signed SSL certificate so that is not the issue. I can send mail using Bell's mail server but that violates our regulatory compliance obligations.
The server using POP3 and one must login to get mail as well as send. Unfortunately there is no otehr error message than the: error sending "mail subject". No further details are provided and when we check the mail servers logs its clear the Pre isn't even attempting to connect to the mail server. So the request to send mail isn't even being sent out. That could be an issue with the Pre or with Bell but Bell support will only troubleshoot to the point of fidning out if you can send using their mail server. We can so their support stops at that point.
I still have v1.3.1 of the WebOS as v1.3.5 doesn't seem to be out for the Bell Pre's yet. But from what I've read v1.3.5 is even worse at handling mail not better. However, there may be a solution out there to this beyond sending the Pre's back (I doubt we can) as Balckberry's and iPhone's don't have this issue.
Any advice is greatly appreciated.
Post relates to: Pre p100eww (Bell)

Further update on this problem. It does send if I use TLS instead of SSL so that must mean that the Palm Pre doesn't use SSLv3 or higher. As TLS is a viable security setting option to maintain compliance I can use that. But still Plam should seriously consider upgrading tis SSL versioning.

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

How to send a mail using SMTPAppender in Log4j..?

Hello friends,
I'm new to this forum.
I'm trying to send mail using SMTPAppender.
I am getting this error..
javax.xml.parsers.FactoryConfigurationError: Provider for javax.xml.parsers.DocumentBuilderFactory cannot be found
at javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:772)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:696)
at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:471)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:125)
at org.apache.log4j.Logger.getLogger(Logger.java:105)
at com.honeywell.logging.Log.<clinit>(Log.java:36)
Exception in thread "main"
Here is the code...
Log.java
package com.something.log;
import org.apache.log4j.Logger;
import org.apache.log4j.LogManager;
import javax.mail.*;
import javax.mail.internet.*;
import org.apache.log4j.helpers.Loader;
import org.apache.log4j.xml.DOMConfigurator;
import java.net.URL;
import java.util.*;
import javax.mail.Message;
import org.apache.log4j.PatternLayout;
import org.apache.log4j.net.SMTPAppender;
public class Main {
* @param args the command line arguments
private static final Logger lg=Logger.getLogger("com.something.log.Main");
public static void main(String[] args) {
URL url = Loader.getResource("log4j.xml");
               DOMConfigurator.configure(url);
          // create email appender
     SMTPAppender smtpAppender = new SMTPAppender();
     smtpAppender.setTo("[email protected]");
     smtpAppender.setFrom("[email protected]");
     smtpAppender.setSMTPHost("smtp.something.com");
     smtpAppender.setSubject("Testing Email");
     smtpAppender.setLocationInfo(false);
     smtpAppender.setLayout(new PatternLayout("%d{ABSOLUTE} %5p %c{1}:%L - %m%n"));
     smtpAppender.activateOptions();
     // add email appender
     lg.addAppender(smtpAppender);
log4j.xml
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE log4j:configuration SYSTEM "log4j.dtd" >
<log4j:configuration>
     <appender name="file"
          class="org.apache.log4j.RollingFileAppender">
          <param name="maxFileSize" value="100KB" />
          <param name="maxBackupIndex" value="5" />
          <param name="File" value="logs/log.txt" />
          <param name="threshold" value="info"/>
          <layout class="org.apache.log4j.PatternLayout">
               <param name="ConversionPattern"
                    value="%d{ABSOLUTE} %5p %c{1}:%L - %m%n" />
          </layout>
     </appender>
     <appender name="mail" class="org.apache.log4j.net.SMTPAppender">
          <param name="SMTPHost" value="smtp.something.com" />
          <param name="From" value="[email protected]" />
          <param name="To" value="[email protected]" />
          <param name="Subject" value="[LOG] ..." />
          <param name="BufferSize" value="1" />
          <param name="threshold" value="error" />
          <layout class="org.apache.log4j.PatternLayout">
               <param name="ConversionPattern"
                    value="%d{ABSOLUTE} %5p %c{1}:%L - %m%n" />
          </layout>
     </appender>
     <root>
          <priority value="debug"></priority>
          <appender-ref ref="file" />
          <appender-ref ref="mail"/>
     </root>
</log4j:configuration>
log4j.properties
log4j.rootLogger=warn, file, mail
log4j.appender.file=org.apache.log4j.RollingFileAppender
log4j.appender.file.maxFileSize=100KB
log4j.appender.file.maxBackupIndex=5
log4j.appender.file.File=D:\log.txt
log4j.appender.file.threshold=info
log4j.appender.file.layout=org.apache.log4j.PatternLayout
log4j.appender.file.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n
#email appender
log4j.appender.mail=org.apache.log4j.net.SMTPAppender
#defines how othen emails are send
log4j.appender.mail.BufferSize=1
log4j.appender.mail.SMTPHost="smtp.something.com"
[email protected]
[email protected]
log4j.appender.mail.Subject=Log ...
log4j.appender.mail.threshold=error
log4j.appender.mail.layout=org.apache.log4j.PatternLayout
log4j.appender.mail.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n
Please help me in fixing the problem.....
Is this code correct to send email...??

I've not reviewed all of your code/config there, but the error seems to me to indicate a problem parsing your log4j.xml file - have you been able to get a simple configuration working? Can you parse other XML files?
Good Luck
Lee

Mail using MXTOOLBOX

Similar Messages

Maybe you are looking for