Mailbox Database not update and status is suspended

Dear,
I got below when I wants to update suspended database on DAG mode
MailDB
Failed
Error:
A source-side operation failed. Error An error occurred while performing the seed operation. Error: An error occurred while processing a request on server 'MAIL2'. Error: An I/O error occurred while attempting to access file 'C:\Mail Data\Program Files\Microsoft\Exchange
Server\V14\Mailbox\MailDB\MailDB.edb' on source server MAIL2. Error: EseDatabaseBackupReader: PerformDatabaseRead failed with error code 0xFFFFFC18. Expected 65536 bytes read, but actually only 0 were read.. [Database: MailDB, Server: MAIL.teletalk.com.bd]
An error occurred while processing a request on server 'MAIL2'. Error: An I/O error occurred while attempting to access file 'C:\Mail Data\Program Files\Microsoft\Exchange Server\V14\Mailbox\MailDB\MailDB.edb' on source server MAIL2. Error: EseDatabaseBackupReader:
PerformDatabaseRead failed with error code 0xFFFFFC18. Expected 65536 bytes read, but actually only 0 were read.
An I/O error occurred while attempting to access file 'C:\Mail Data\Program Files\Microsoft\Exchange Server\V14\Mailbox\MailDB\MailDB.edb' on source server MAIL2. Error: EseDatabaseBackupReader: PerformDatabaseRead failed with error code 0xFFFFFC18. Expected
65536 bytes read, but actually only 0 were read.
EseDatabaseBackupReader: PerformDatabaseRead failed with error code 0xFFFFFC18. Expected 65536 bytes read, but actually only 0 were read.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.2.247.1&t=exchgf1&e=ms.exch.err.Ex4543D9
Exchange Management Shell command attempted:
update-MailboxDatabaseCopy -Identity 'MailDB\MAIL' -SourceServer 'MAIL2' -Network 'MailBoxDAG\DAGNetwork02' -DeleteExistingFiles
Elapsed Time: 00:39:28
Thanks, Limon ,Dhaka,Bangladesh

Hi ,
1.Please have a look in to the error message and it clearly says that the database is not active on the source server and also please check the active database on the source server is on healthy state .
Error: An error occurred w
hile processing a request on server 'MAIL2'. Error: Database 'd779408f-7923-4749-963a-05ab9ba77bd6' was
not active on source server 'Mailboxy'.. [Database: MailDB, Server: MAIL.domain.com]
2.test-replicationhealth | fl
3.get-mailboxdatabasecopystatus -server "the server which is holding the active database" |
fl
Please run the above commands to check is there any error messages coming on the output and also if possible
please share me that .
Please reply me if you have any queries.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

Smart Mailbox Does Not Update Sent Items Automatically?

i use mail to send out proposals to clients that always have the word 'proposal' in the subject and always contain an attachment (pdf).
i set up a smart mailbox called 'sent proposals' so that i can easily view a list of proposals that i have sent out.
the criteria for the smart mailbox is:
-match all of the following conditions
-subject contains 'proposal'
-contains attachments
-from contains my@emailaddress (i have multiple accounts...)
-include messages from sent
the problem i am having is that the messages are not automaticlly displayed after i send them. for instance, i sent a proposal out yesterday and it still not displayed in the smart mailbox as of today even though i have opened and quit mail 10 times and have restarted my computer.
the only way i can get it to show up is by going into the sent folder and opening the original message. if i do that, the smart mailbox suddenly gets updated and then displays the message from that point forward. unfortunately, this defeats the purpose of the smart mailbox.....
any ideas?

an interesing development...
i created a new smart folder called 'sent proposals 2' and set the criteria to:
match all conditions
subject contains 'proposal'
include messages from sent
then i sent another test message with an attachment with the subject 'test proposal'.
the email shows up in the newly created 'sent proposals 2' smart mailbox but not in the original 'sent proposals'...
i then edited the 'sent proposals 2' smart mailbox to include the 'contains attachments' and the test proposal email disappeared from the list.
i then edited it so that the only criteria was 'contains attachments' and the test proposal email is still not showing up, although it seems like all my previous messages that contain attachments did show up.
i guess that means that the problem is in the indexing of the emails with attachments. for some reason or another, mail.app will not index the criteria of having an attachment of sent messages unless they are opened (or displayed in the preview pane) after they are sent.
can anyone duplicate this on their machine?
just set up a smart mailbox with the criteria:
contains attachments
include sent
send a message with an attachment to an external account (i used my gmail address) and see if it shows up in the smart mailbox. if it doesnt show up, go into the sent items and open the email, then look to see if it shows up in the smart mailbox.
thanks,
geoff

My iphone 3 8gb will not update and is stuck on 4.2.1 anyone help??

can anyone help me with my iphone 3 8gb it will not update and is stuck on 4.2.1, everytime i stick it on itunes it just moves the update to a later date everytime, so anyone if you can help me i would be grateful thanks.

" my iphone 3 8gb it will not update and is stuck on 4.2.1, "
That is correct. ios 4.2.1 is the latest available for your iphone.

E52 Date Display does not update and reflect the c...

Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?

Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!!

HT6147 Why haven't they done a patch for those of us who have not updated and prefer to use iOS 6?

Why haven't they done a patch for those of us who have not updated and prefer to use iOS 6?

Totally agree with Andy. Apple needs to support its users whether or not they decide to update to iOS 7.
The reviews from i Pad 3 owners (like me) is that when they've updated to iOS 7 they've experienced latency and sluggishness. Why would I ruin a perfectly good iPad by updating to iOS 7?
Please let me know where I can find a patch for iOS 6.
Thanks!

What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!! Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

You should get your keyboard checked as it's repeating on a lot of keys and makes you look silly.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4061 My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

My mail will not update and stay current. Its always searching but doesn't do anthing. Any suggestions for ipad3?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Mac os x lion 10.7 on mac book pro not updating and running very slow

i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code

And that error code is?

HT5958 Existing projects will not update and are not available for Final Cut Pro 10.1.1?

I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?

In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ

Junk and Virus database not updating.

I have 10.4.11 installed and am running mail. In the filters tab I have the box checked to:
Update the Junk mail and virus database [1] time(s) every day.
and the "Last update" is "not available"
The server has been up for several days and has not updated the database.
how can I get the database to update?
Thanks
KRR

Aimee-
Until you 'commit' from the session you have issued the 'delete' statement, the other sessions will not be able to see the changes. In other words, the other sessions are getting you a read consistent view of the data.

Outgoing server settings entered correctly but will not update and tries to send under old settings

I can receive all of my emails correctly but can not send any emails. I have set up under a different program and it works fine. I have tried to update thunderbird by its settings and it does not provide any options?? I am running ubuntu 14.04lts.
My outgoing mail settings are correct but when thunderbird tries to send it uses old settings and does not update to the new mail server.
https://app.box.com/s/i27ulu2zq53iaq444boxoo7dp047qgyt
https://app.box.com/s/ivujudbq64mp8e5fd0pzkv5yt724bzta
https://app.box.com/s/zwj25bxv10sad27fcuov2ters23lcvu8
Thanks in advance

Application Basics
Name: Thunderbird
Version: 31.4.0
User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
Profile Directory: Open Directory
(Unknown location)
Application Build ID: 20150112185638
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Memory Use: about:memory
Mail and News Accounts
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
account3:
INCOMING: account3, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
account5:
INCOMING: account5, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
account6:
INCOMING: account6, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
account7:
INCOMING: account7, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
account9:
INCOMING: account9, , (pop3) mail.crochead.com:110, plain, passwordCleartext
OUTGOING: mail.crochead.com:465, SSL, passwordCleartext, true
account10:
INCOMING: account10, , (imap) imap.crochead.com.au:143, alwaysSTARTTLS, passwordEncrypted
OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
account11:
INCOMING: account11, , (imap) mail3.bigcommerce.com:993, SSL, passwordCleartext
OUTGOING: mail3.bigcommerce.com:587, alwaysSTARTTLS, passwordEncrypted, true
Crash Reports
Extensions
Enigmail, 1.7.2, true, {847b3a00-7ab1-11d4-8f02-006008948af5}
Lightning, 3.3.4, true, {e2fda1a4-762b-4020-b5ad-a41df1933103}
Messaging Menu and Unity Launcher integration, 1.3.1, true, [email protected]
Provider for Google Calendar, 0.32, true, {a62ef8ec-5fdc-40c2-873c-223b8a6925cc}
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 204800
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
extensions.lastAppVersion: 31.4.0
general.autoScroll: true
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: 912c1d9f-f79f-4a8b-9bf5-5c273fa7a3c
mailnews.database.global.indexer.enabled: false
mailnews.database.global.views.conversation.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1424651152
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
print.print_bgcolor: false
print.print_bgimages: false
print.print_colorspace: default
print.print_downloadfonts: false
print.print_evenpages: true
print.print_in_color: true
print.print_margin_bottom: 0.5
print.print_margin_left: 0.5
print.print_margin_right: 0.5
print.print_margin_top: 0.5
print.print_oddpages: true
print.print_orientation: 0
print.print_page_delay: 50
print.print_paper_data: 0
print.print_paper_height: 279.40
print.print_paper_name: na_letter
print.print_paper_size_type: 1
print.print_paper_size_unit: 1
print.print_paper_width: 215.90
print.print_plex_name: default
print.print_resolution_name: default
print.print_scaling: 1.00
print.print_shrink_to_fit: true
print.print_to_file: false
print.print_unwriteable_margin_bottom: 56
print.print_unwriteable_margin_left: 25
print.print_unwriteable_margin_right: 25
print.print_unwriteable_margin_top: 25
privacy.donottrackheader.enabled: true
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
Graphics
Adapter Description: X.Org -- Gallium 0.4 on AMD KABINI
Vendor ID: X.Org
Device ID: Gallium 0.4 on AMD KABINI
Driver Version: 3.0 Mesa 10.1.3
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: cairo
AzureSkiaAccelerated: 0
AzureFallbackCanvasBackend: none
AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.6
4.10.6
NSS
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS Util
3.16.2.3
3.16.2.3
NSS SSL
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS S/MIME
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC

OOTB Approval Workflow on Custom List does not Update Approval Status

I have a custom list on which I've required content approval. I then created a workflow instance from the "Approval - SharePoint 2010" template. For this workflow I have selected "Update the approval status after the workflow
is completed (use this workflow to control content approval". When I approve the list item via the workflow task item the status of the item is not updated but stays at pending even though the
workflow shows "Completed" with the Outcome of "approved". Is this the expected behavior, i.e. does "Update the approval status after the workflow is completed (use this workflow to control content approval"
not work for custom lists? Does it work on any of the lists?

Hi Kalos1840,
If you check "Require Content Approval" setting, only the way above can update the approval status due to the approval status is for this approval workflow. As this approval workflow cannot achieve your demand, I recommend you un-check "Require Content Approval"
setting and create a custom workflow such as the OOTB Approval Workflow or SharePoint Designer workflow.
Here is the steps of a SharePoint Designer workflow:
1.Go to your custom list , click Create a Workflow in SharePoint Designer.
2.Add a “Start a task process” action in your workflow.
3.Click “these users” and Start a Task Process edit page will pop up.
4.In the Participants field, input your approvers based on the order of approval.
5.In the right of Participants field, select “Serial (one at a time)”.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Dto changed but database not updated

hi, i am trying to create a simple program that has an entity bean which maps to a table in database.
i created dto for the bean and i was able to find(), create(), with the database insertion of the new creation correctly. but i when i updated an attribute of the dto using its setXXX(), the database was not updated after the action.
can anyone help me with this problem? thanks!

i did some googling n found a thread that says it is the concurreny strategy issue. i tried setting it as other values except readonly but it still doesnt works. anyone can enlighten me?

IPod 4th Gen not updating "played" status.

Hi, recently I'm having a problem with my Ipod touch 4th Gen. It works fine, plays music and videos normally, but it does not update the "last played" status, nor "last played date". This is a problem because I sync my videos based on "most recent not played", and I have some smartlists that make use of that statur or date too.
This happened once before I upgraded from iOS 5 to Six, but apparently was corrected; however, since I upgraded to iOS 6, none of my played items is being updated. Could it be because of the iOS upgrading, or maybe there is something else I'm missing?

iOS: Device not recognized in iTunes for Mac OS X
It will not show up in Finder/Spotlight search

Mailbox Database not update and status is suspended

Similar Messages

Maybe you are looking for